Patchwork [U-Boot,v2,3/3] ARM: Congatec: README update

login
register
mail settings
Submitter SARTRE Leo
Date June 20, 2013, 1:46 p.m.
Message ID <3465D313FDFB824F9A9C8CD24FA4F6BC0108CD38@frontmail.adetel.com>
Download mbox | patch
Permalink /patch/252935/
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Comments

SARTRE Leo - June 20, 2013, 1:46 p.m.
README: U-boot works both on SPI-NOR and SDcard

Signed-off-by: Leo Sartre <lsartre@adeneo-embedded.com>
---
 board/congatec/cgtqmx6eval/README |    3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
Otavio Salvador - June 20, 2013, 2:35 p.m.
On Thu, Jun 20, 2013 at 10:46 AM, SARTRE Leo
<lsartre@adeneo-embedded.com> wrote:
> README: U-boot works both on SPI-NOR and SDcard
>
> Signed-off-by: Leo Sartre <lsartre@adeneo-embedded.com>

Acked-by: Otavio Salvador <otavio@ossystems.com.br>

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750

Patch

diff --git a/board/congatec/cgtqmx6eval/README b/board/congatec/cgtqmx6eval/README
index bbf0f75..5e76d2a 100644
--- a/board/congatec/cgtqmx6eval/README
+++ b/board/congatec/cgtqmx6eval/README
@@ -7,8 +7,7 @@  Conga-QEVAl Evaluation Carrier board with qmx6 quad module.
 1. Boot source, boot from SD card
 ---------------------------------
 
-This version of u-boot works only on the SD card. By default, the
-Congatec board can boot only from the SPI-NOR.
+By default, the Congatec board can boot only from the SPI-NOR.
 But, with the u-boot version provided with the board you can write boot
 registers to force the board to reboot and boot from the SD slot. If
 "bmode" command is not available from your pre-installed u-boot, these