@@ -18,6 +18,7 @@ LIB = $(obj)lib$(SOC).o
COBJS-$(CONFIG_AM33XX) += clock_am33xx.o
COBJS-$(CONFIG_TI814X) += clock_ti814x.o
+COBJS-$(CONFIG_TI816X) += clock_ti816x.o
COBJS += sys_info.o
COBJS += mem.o
COBJS += ddr.o
@@ -108,103 +108,8 @@ struct ad_pll {
#define OSC_SRC_CTRL (PLL_SUBSYS_BASE + 0x2C0)
-/* PRCM */
#define ENET_CLKCTRL_CMPL 0x30000
-#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500)
-
-struct cm_def {
- unsigned int resv0[2];
- unsigned int l3fastclkstctrl;
- unsigned int resv1[1];
- unsigned int pciclkstctrl;
- unsigned int resv2[1];
- unsigned int ducaticlkstctrl;
- unsigned int resv3[1];
- unsigned int emif0clkctrl;
- unsigned int emif1clkctrl;
- unsigned int dmmclkctrl;
- unsigned int fwclkctrl;
- unsigned int resv4[10];
- unsigned int usbclkctrl;
- unsigned int resv5[1];
- unsigned int sataclkctrl;
- unsigned int resv6[4];
- unsigned int ducaticlkctrl;
- unsigned int pciclkctrl;
-};
-
-#define CM_ALWON_BASE (PRCM_BASE + 0x1400)
-
-struct cm_alwon {
- unsigned int l3slowclkstctrl;
- unsigned int ethclkstctrl;
- unsigned int l3medclkstctrl;
- unsigned int mmu_clkstctrl;
- unsigned int mmucfg_clkstctrl;
- unsigned int ocmc0clkstctrl;
- unsigned int vcpclkstctrl;
- unsigned int mpuclkstctrl;
- unsigned int sysclk4clkstctrl;
- unsigned int sysclk5clkstctrl;
- unsigned int sysclk6clkstctrl;
- unsigned int rtcclkstctrl;
- unsigned int l3fastclkstctrl;
- unsigned int resv0[67];
- unsigned int mcasp0clkctrl;
- unsigned int mcasp1clkctrl;
- unsigned int mcasp2clkctrl;
- unsigned int mcbspclkctrl;
- unsigned int uart0clkctrl;
- unsigned int uart1clkctrl;
- unsigned int uart2clkctrl;
- unsigned int gpio0clkctrl;
- unsigned int gpio1clkctrl;
- unsigned int i2c0clkctrl;
- unsigned int i2c1clkctrl;
- unsigned int mcasp345clkctrl;
- unsigned int atlclkctrl;
- unsigned int mlbclkctrl;
- unsigned int pataclkctrl;
- unsigned int resv1[1];
- unsigned int uart3clkctrl;
- unsigned int uart4clkctrl;
- unsigned int uart5clkctrl;
- unsigned int wdtimerclkctrl;
- unsigned int spiclkctrl;
- unsigned int mailboxclkctrl;
- unsigned int spinboxclkctrl;
- unsigned int mmudataclkctrl;
- unsigned int resv2[2];
- unsigned int mmucfgclkctrl;
- unsigned int resv3[2];
- unsigned int ocmc0clkctrl;
- unsigned int vcpclkctrl;
- unsigned int resv4[2];
- unsigned int controlclkctrl;
- unsigned int resv5[2];
- unsigned int gpmcclkctrl;
- unsigned int ethernet0clkctrl;
- unsigned int ethernet1clkctrl;
- unsigned int mpuclkctrl;
- unsigned int debugssclkctrl;
- unsigned int l3clkctrl;
- unsigned int l4hsclkctrl;
- unsigned int l4lsclkctrl;
- unsigned int rtcclkctrl;
- unsigned int tpccclkctrl;
- unsigned int tptc0clkctrl;
- unsigned int tptc1clkctrl;
- unsigned int tptc2clkctrl;
- unsigned int tptc3clkctrl;
- unsigned int resv7[4];
- unsigned int dcan01clkctrl;
- unsigned int mmchs0clkctrl;
- unsigned int mmchs1clkctrl;
- unsigned int mmchs2clkctrl;
- unsigned int custefuseclkctrl;
-};
-
#define SATA_PLL_BASE (CTRL_BASE + 0x0720)
struct sata_pll {
new file mode 100644
@@ -0,0 +1,529 @@
+/*
+ * clock_ti816x.c
+ *
+ * Clocks for TI816X based boards
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * Based on TI-PSP-04.00.02.14 :
+ *
+ * Copyright (C) 2009, Texas Instruments, Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+#include <asm/emif.h>
+
+#define CM_PLL_BASE (CTRL_BASE + 0x0400)
+
+/* Main PLL */
+#define MAIN_N 64
+#define MAIN_P 0x1
+#define MAIN_INTFREQ1 0x8
+#define MAIN_FRACFREQ1 0x800000
+#define MAIN_MDIV1 0x2
+#define MAIN_INTFREQ2 0xE
+#define MAIN_FRACFREQ2 0x0
+#define MAIN_MDIV2 0x1
+#define MAIN_INTFREQ3 0x8
+#define MAIN_FRACFREQ3 0xAAAAB0
+#define MAIN_MDIV3 0x3
+#define MAIN_INTFREQ4 0x9
+#define MAIN_FRACFREQ4 0x55554F
+#define MAIN_MDIV4 0x3
+#define MAIN_INTFREQ5 0x9
+#define MAIN_FRACFREQ5 0x374BC6
+#define MAIN_MDIV5 0xC
+#define MAIN_MDIV6 0x48
+#define MAIN_MDIV7 0x4
+
+/* DDR PLL */
+#if defined(CONFIG_TI816X_DDR_PLL_400) /* 400 MHz */
+#define DDR_N 59
+#define DDR_P 0x1
+#define DDR_MDIV1 0x4
+#define DDR_INTFREQ2 0x8
+#define DDR_FRACFREQ2 0xD99999
+#define DDR_MDIV2 0x1E
+#define DDR_INTFREQ3 0x8
+#define DDR_FRACFREQ3 0x0
+#define DDR_MDIV3 0x4
+#define DDR_INTFREQ4 0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ4 0x0
+#define DDR_MDIV4 0x4
+#define DDR_INTFREQ5 0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ5 0x0
+#define DDR_MDIV5 0x4
+#elif defined(CONFIG_TI816X_DDR_PLL_531) /* 531 MHz */
+#define DDR_N 59
+#define DDR_P 0x1
+#define DDR_MDIV1 0x3
+#define DDR_INTFREQ2 0x8
+#define DDR_FRACFREQ2 0xD99999
+#define DDR_MDIV2 0x1E
+#define DDR_INTFREQ3 0x8
+#define DDR_FRACFREQ3 0x0
+#define DDR_MDIV3 0x4
+#define DDR_INTFREQ4 0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ4 0x0
+#define DDR_MDIV4 0x4
+#define DDR_INTFREQ5 0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ5 0x0
+#define DDR_MDIV5 0x4
+#elif defined(CONFIG_TI816X_DDR_PLL_675) /* 675 MHz */
+#define DDR_N 50
+#define DDR_P 0x1
+#define DDR_MDIV1 0x2
+#define DDR_INTFREQ2 0x9
+#define DDR_FRACFREQ2 0x0
+#define DDR_MDIV2 0x19
+#define DDR_INTFREQ3 0x13
+#define DDR_FRACFREQ3 0x800000
+#define DDR_MDIV3 0x2
+#define DDR_INTFREQ4 0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ4 0x0
+#define DDR_MDIV4 0x4
+#define DDR_INTFREQ5 0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ5 0x0
+#define DDR_MDIV5 0x4
+#elif defined(CONFIG_TI816X_DDR_PLL_796) /* 796 MHz */
+#define DDR_N 59
+#define DDR_P 0x1
+#define DDR_MDIV1 0x2
+#define DDR_INTFREQ2 0x8
+#define DDR_FRACFREQ2 0xD99999
+#define DDR_MDIV2 0x1E
+#define DDR_INTFREQ3 0x8
+#define DDR_FRACFREQ3 0x0
+#define DDR_MDIV3 0x4
+#define DDR_INTFREQ4 0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ4 0x0
+#define DDR_MDIV4 0x4
+#define DDR_INTFREQ5 0xE /* Expansion DDR clk */
+#define DDR_FRACFREQ5 0x0
+#define DDR_MDIV5 0x4
+#endif
+
+#define CONTROL_STATUS (CTRL_BASE + 0x40)
+#define DDR_RCD (CTRL_BASE + 0x070C)
+#define CM_TIMER1_CLKSEL (PRCM_BASE + 0x390)
+#define DMM_PAT_BASE_ADDR (DMM_BASE + 0x420)
+#define CM_ALWON_CUST_EFUSE_CLKCTRL (PRCM_BASE + 0x1628)
+
+#define INTCPS_SYSCONFIG 0x48200010
+#define CM_SYSCLK10_CLKSEL 0x48180324
+
+/* WDT related */
+#define WDT_WDSC (WDT_BASE + 0x010)
+#define WDT_WDST (WDT_BASE + 0x014)
+#define WDT_WISR (WDT_BASE + 0x018)
+#define WDT_WIER (WDT_BASE + 0x01C)
+#define WDT_WWER (WDT_BASE + 0x020)
+#define WDT_WCLR (WDT_BASE + 0x024)
+#define WDT_WCRR (WDT_BASE + 0x028)
+#define WDT_WLDR (WDT_BASE + 0x02C)
+#define WDT_WTGR (WDT_BASE + 0x030)
+#define WDT_WWPS (WDT_BASE + 0x034)
+#define WDT_WDLY (WDT_BASE + 0x044)
+#define WDT_WSPR (WDT_BASE + 0x048)
+#define WDT_WIRQEOI (WDT_BASE + 0x050)
+#define WDT_WIRQSTATRAW (WDT_BASE + 0x054)
+#define WDT_WIRQSTAT (WDT_BASE + 0x058)
+#define WDT_WIRQENSET (WDT_BASE + 0x05C)
+#define WDT_WIRQENCLR (WDT_BASE + 0x060)
+#define WDT_UNFREEZE (CTRL_BASE + 0x100)
+
+struct cm_pll {
+ unsigned int mainpll_ctrl; /* offset 0x400 */
+ unsigned int mainpll_pwd;
+ unsigned int mainpll_freq1;
+ unsigned int mainpll_div1;
+ unsigned int mainpll_freq2;
+ unsigned int mainpll_div2;
+ unsigned int mainpll_freq3;
+ unsigned int mainpll_div3;
+ unsigned int mainpll_freq4;
+ unsigned int mainpll_div4;
+ unsigned int mainpll_freq5;
+ unsigned int mainpll_div5;
+ unsigned int resv0[1];
+ unsigned int mainpll_div6;
+ unsigned int resv1[1];
+ unsigned int mainpll_div7;
+ unsigned int ddrpll_ctrl; /* offset 0x440 */
+ unsigned int ddrpll_pwd;
+ unsigned int resv2[1];
+ unsigned int ddrpll_div1;
+ unsigned int ddrpll_freq2;
+ unsigned int ddrpll_div2;
+ unsigned int ddrpll_freq3;
+ unsigned int ddrpll_div3;
+ unsigned int ddrpll_freq4;
+ unsigned int ddrpll_div4;
+ unsigned int ddrpll_freq5;
+ unsigned int ddrpll_div5;
+ unsigned int videopll_ctrl; /* offset 0x470 */
+ unsigned int videopll_pwd;
+ unsigned int videopll_freq1;
+ unsigned int videopll_div1;
+ unsigned int videopll_freq2;
+ unsigned int videopll_div2;
+ unsigned int videopll_freq3;
+ unsigned int videopll_div3;
+ unsigned int resv3[4];
+ unsigned int audiopll_ctrl; /* offset 0x4A0 */
+ unsigned int audiopll_pwd;
+ unsigned int resv4[2];
+ unsigned int audiopll_freq2;
+ unsigned int audiopll_div2;
+ unsigned int audiopll_freq3;
+ unsigned int audiopll_div3;
+ unsigned int audiopll_freq4;
+ unsigned int audiopll_div4;
+ unsigned int audiopll_freq5;
+ unsigned int audiopll_div5;
+};
+
+const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE;
+const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE;
+const struct cm_pll *cmpll = (struct cm_pll *)CM_PLL_BASE;
+
+const struct ddr_regs *ddr_reg[2] = {
+ (struct ddr_regs *)DDRPHY_0_CONFIG_BASE,
+ (struct ddr_regs *)DDRPHY_1_CONFIG_BASE,
+};
+
+/* needed by config_dmm() */
+void enable_dmm_clocks(void) {}
+
+void enable_emif_clocks(void)
+{
+ writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl);
+ writel(PRCM_MOD_EN, &cmdef->emif0clkctrl);
+ writel(PRCM_MOD_EN, &cmdef->emif1clkctrl);
+ while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300)
+ ;
+ while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN)
+ ;
+ while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN)
+ ;
+
+ writel(PRCM_MOD_EN, &cmdef->dmmclkctrl);
+ while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN)
+ ;
+
+ /* Enable Tiled Access */
+ writel(0x80000000, DMM_PAT_BASE_ADDR);
+}
+
+void ddr_pll_config(unsigned int pll)
+{
+ writel(0x5, &(ddr_reg[pll])->cm0config);
+ writel(0x5, &(ddr_reg[pll])->cm0configclk);
+ writel(0x5, &(ddr_reg[pll])->cm1config);
+ writel(0x5, &(ddr_reg[pll])->cm1configclk);
+ writel(0x5, &(ddr_reg[pll])->cm2config);
+ writel(0x5, &(ddr_reg[pll])->cm2configclk);
+}
+
+/* assume delay is aprox at least 1us */
+static void ddr_delay(int d)
+{
+ int i;
+
+ /*
+ * read a control module register.
+ * this is a bit more delay and cannot be optimized by the compiler
+ * assuming one read takes 200 cycles and A8 is runing 1 GHz
+ * somewhat conservative setting
+ */
+ for (i = 0; i < 50*d; i++)
+ readl(CONTROL_STATUS);
+}
+
+static void main_pll_init_ti816x(u32 sil_index, u32 clk_index)
+{
+ u32 main_pll_ctrl = 0;
+
+ /*
+ * Sequence to be followed:
+ * 1. Put the PLL in bypass mode by setting BIT2 in its ctrl reg
+ * 2. Write the values of N,P in the CTRL reg
+ * 3. Program the freq values, divider values for the required output
+ * in the Control module reg
+ * 4. Note: Loading the freq value requires a particular bit to be set
+ * in the freq reg.
+ * 4. Program the CM divider value in the CM module reg
+ * 5. Enable the PLL by setting the appropriate bit in the CTRL reg of
+ * the PLL
+ */
+
+ /* If the registers have been set by the ROM code dont do anything */
+
+ main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+ main_pll_ctrl &= 0xFFFFFFFB;
+ main_pll_ctrl |= 4;
+ writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+
+ main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+ main_pll_ctrl &= 0xFFFFFFF7;
+ main_pll_ctrl |= 8;
+ writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+
+ main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+ main_pll_ctrl &= 0xFF;
+ main_pll_ctrl |= (MAIN_N<<16 | MAIN_P<<8);
+ writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+
+ writel(0x0, &cmpll->mainpll_pwd);
+
+ writel((1<<31 | 1<<28 | (MAIN_INTFREQ1<<24) | MAIN_FRACFREQ1),
+ &cmpll->mainpll_freq1);
+ writel(((1<<8) | MAIN_MDIV1), &cmpll->mainpll_div1);
+
+ writel((1<<31 | 1<<28 | (MAIN_INTFREQ2<<24) | MAIN_FRACFREQ2),
+ &cmpll->mainpll_freq2);
+ writel(((1<<8) | MAIN_MDIV2), &cmpll->mainpll_div2);
+
+ writel((1<<31 | 1<<28 | (MAIN_INTFREQ3<<24) | MAIN_FRACFREQ3),
+ &cmpll->mainpll_freq3);
+ writel(((1<<8) | MAIN_MDIV3), &cmpll->mainpll_div3);
+
+ writel((1<<31 | 1<<28 | (MAIN_INTFREQ4<<24) | MAIN_FRACFREQ4),
+ &cmpll->mainpll_freq4);
+ writel(((1<<8) | MAIN_MDIV4), &cmpll->mainpll_div4);
+
+ writel((1<<31 | 1<<28 | (MAIN_INTFREQ5<<24) | MAIN_FRACFREQ5),
+ &cmpll->mainpll_freq5);
+ writel(((1<<8) | MAIN_MDIV5), &cmpll->mainpll_div5);
+
+ writel((1<<8 | MAIN_MDIV6), &cmpll->mainpll_div6);
+
+ writel((1<<8 | MAIN_MDIV7), &cmpll->mainpll_div7);
+
+ while ((readl(&cmpll->mainpll_ctrl) & 0x80) != 0x80)
+ ;
+
+ main_pll_ctrl = readl(&cmpll->mainpll_ctrl);
+ main_pll_ctrl &= 0xFFFFFFFB;
+
+ writel(main_pll_ctrl, &cmpll->mainpll_ctrl);
+}
+
+static void ddr_pll_init_ti816x(u32 sil_index, u32 clk_index)
+{
+ u32 ddr_pll_ctrl = 0;
+
+ /*
+ * Sequence to be followed:
+ * 1. Put the PLL in bypass mode by setting BIT2 in its ctrl reg
+ * 2. Write the values of N,P in the CTRL reg
+ * 3. Program the freq values, divider values for the required output
+ * in the Control module reg
+ * 4. Note: Loading the freq value requires a particular bit to be set
+ * in the freq reg.
+ * 5. Program the CM divider value in the CM module reg
+ * 6. Enable the PLL by setting the appropriate bit in the CTRL reg of
+ * the PLL
+ */
+
+ /* If the registers have been set by the ROM code dont do anything */
+
+ ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl);
+ ddr_pll_ctrl &= 0xFFFFFFFB;
+ writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl);
+
+ ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl);
+ ddr_pll_ctrl &= 0xFFFFFFF7;
+ ddr_pll_ctrl |= 8;
+ writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl);
+
+ ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl);
+ ddr_pll_ctrl &= 0xFF;
+ ddr_pll_ctrl |= (DDR_N<<16 | DDR_P<<8);
+ writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl);
+
+ /* 10usec delay */
+ ddr_delay(10);
+
+ writel(0x0, &cmpll->ddrpll_pwd);
+
+ writel(((0<<8) | DDR_MDIV1), &cmpll->ddrpll_div1);
+ ddr_delay(1);
+ writel(((1<<8) | DDR_MDIV1), &cmpll->ddrpll_div1);
+
+ writel((1<<31 | 1<<28 | (DDR_INTFREQ2<<24) | DDR_FRACFREQ2),
+ &cmpll->ddrpll_freq2);
+ writel(((1<<8) | DDR_MDIV2), &cmpll->ddrpll_div2);
+
+ writel(((0<<8) | DDR_MDIV3), &cmpll->ddrpll_div3);
+ ddr_delay(1);
+ writel(((1<<8) | DDR_MDIV3), &cmpll->ddrpll_div3);
+ ddr_delay(1);
+ writel((0<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3),
+ &cmpll->ddrpll_freq3);
+ ddr_delay(1);
+ writel((1<<31 | 1<<28 | (DDR_INTFREQ3<<24) | DDR_FRACFREQ3),
+ &cmpll->ddrpll_freq3);
+
+ ddr_delay(5);
+
+ /* Wait for PLL to lock */
+ while ((readl(&cmpll->ddrpll_ctrl) & 0x80) != 0x80)
+ ;
+
+ ddr_pll_ctrl = readl(&cmpll->ddrpll_ctrl);
+ ddr_pll_ctrl &= 0xFFFFFFFB;
+ ddr_pll_ctrl |= 4;
+ writel(ddr_pll_ctrl, &cmpll->ddrpll_ctrl);
+
+ writel(0x1, DDR_RCD);
+}
+static void peripheral_enable(void)
+{
+ /* DMTimers */
+ writel(0x2, &cmalwon->l3slowclkstctrl);
+
+ /*
+ * Note on Timers:
+ * There are 8 timers(0-7) out of which timer 0 is a secure timer.
+ * Timer 0 mux should not be changed
+ * For other timers, there are 3 inputs TCLKIN, 32KHz (external clk
+ * or SYSCLK18?) and CLKIN(27MHz)
+ * We select CLKIN and use that
+ */
+
+ /*
+ * First we need to enable the modules and setup the clk path
+ * Then the timers need to be configured by writing to their registers
+ * To access the timer registers we need the module to be
+ * enabled which is what we do in the first step
+ */
+
+ /* TIMER 1 */
+ writel(0x2, &cmalwon->timer1clkctrl);
+
+ /* Selects CLKIN (27MHz) */
+ writel(0x2, CM_TIMER1_CLKSEL);
+
+ while (((readl(&cmalwon->l3slowclkstctrl)
+ & (0x80000<<1)) >> (19+1)) != 1)
+ ;
+
+ while (((readl(&cmalwon->timer1clkctrl) & 0x30000)>>16) != 0)
+ ;
+
+
+ writel(0x2, (DM_TIMER1_BASE + 0x54));
+ while (readl(DM_TIMER1_BASE + 0x10) & 1)
+ ;
+
+ writel(0x1, (DM_TIMER1_BASE + 0x38));
+
+ /* UARTs */
+ /* Note: The clock has been set to correct rate before this step */
+ writel(0x2, &cmalwon->uart0clkctrl);
+ while (readl(&cmalwon->uart0clkctrl) != 0x2)
+ ;
+
+ writel(0x2, &cmalwon->uart1clkctrl);
+ while (readl(&cmalwon->uart1clkctrl) != 0x2)
+ ;
+
+ writel(0x2, &cmalwon->uart2clkctrl);
+ while (readl(&cmalwon->uart2clkctrl) != 0x2)
+ ;
+
+ while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100)
+ ;
+
+ /* eFuse */
+ writel(0x2, CM_ALWON_CUST_EFUSE_CLKCTRL);
+ while (readl(CM_ALWON_CUST_EFUSE_CLKCTRL) != 0x2)
+ ;
+
+ /* GPIO0 */
+ writel(0x2, &cmalwon->gpio0clkctrl);
+ while (readl(&cmalwon->gpio0clkctrl) != 0x2)
+ ;
+
+ writel((BIT(8)), &cmalwon->gpio0clkctrl);
+
+ /* SPI */
+ writel(0x2, &cmalwon->spiclkctrl);
+ while (readl(&cmalwon->spiclkctrl) != 0x2)
+ ;
+
+ /* I2C0 */
+ writel(0x2, &cmalwon->i2c0clkctrl);
+ while (readl(&cmalwon->i2c0clkctrl) != 0x2)
+ ;
+
+ /* Ethernet */
+ writel(0x2, &cmalwon->ethclkstctrl);
+ writel(0x2, &cmalwon->ethernet0clkctrl);
+ writel(0x2, &cmalwon->ethernet1clkctrl);
+
+ /* HSMMC */
+ writel(0x2, &cmalwon->sdioclkctrl);
+ while (readl(&cmalwon->sdioclkctrl) != 0x2)
+ ;
+
+ /*
+ * WDT
+ *
+ * For WDT to be functional, it needs to be first stopped by writing
+ * the pattern 0xAAAA followed by 0x5555 in the WDT start/stop register.
+ * After that a write-once register in Control module needs to
+ * be configured
+ * to unfreeze the timer.
+ * Note: It is important to stop the watchdog before unfreezing it
+ */
+ writel(0xAAAA, WDT_WSPR);
+ while (readl(WDT_WWPS) != 0x0)
+ ;
+ writel(0x5555, WDT_WSPR);
+ while (readl(WDT_WWPS) != 0x0)
+ ;
+
+ writel(0x2, WDT_UNFREEZE);
+}
+
+void pll_init(void)
+{
+ /* For future */
+ u32 clk_index = 0, sil_index = 0;
+
+ writel(0x2, INTCPS_SYSCONFIG);
+
+ /* Enable the control module */
+ writel(0x2, &cmalwon->controlclkctrl);
+
+ /* Fix ROM code bug - from TI-PSP-04.00.02.14 */
+ writel(0x0, CM_SYSCLK10_CLKSEL);
+
+ main_pll_init_ti816x(clk_index, sil_index);
+ ddr_pll_init_ti816x(clk_index, sil_index);
+
+ /*
+ * With clk freqs setup to desired values,
+ * enable the required peripherals
+ */
+ peripheral_enable();
+}
@@ -89,7 +89,9 @@ void config_ddr(unsigned int pll, unsigned int ioctrl,
{
enable_emif_clocks();
ddr_pll_config(pll);
+#ifndef CONFIG_TI816X
config_vtp(nr);
+#endif
config_cmd_ctrl(ctrl, nr);
config_ddr_data(data, nr);
@@ -21,4 +21,8 @@
#include <asm/arch/clocks_am33xx.h>
+#ifdef CONFIG_TI81XX
+#include <asm/arch/clock_ti81xx.h>
+#endif
+
#endif
new file mode 100644
@@ -0,0 +1,142 @@
+/*
+ * ti81xx.h
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _CLOCK_TI81XX_H_
+#define _CLOCK_TI81XX_H_
+
+#define PRCM_MOD_EN 0x2
+
+#define CM_DEFAULT_BASE (PRCM_BASE + 0x0500)
+#define CM_ALWON_BASE (PRCM_BASE + 0x1400)
+
+struct cm_def {
+ unsigned int resv0[2];
+ unsigned int l3fastclkstctrl;
+ unsigned int resv1[1];
+ unsigned int pciclkstctrl;
+ unsigned int resv2[1];
+ unsigned int ducaticlkstctrl;
+ unsigned int resv3[1];
+ unsigned int emif0clkctrl;
+ unsigned int emif1clkctrl;
+ unsigned int dmmclkctrl;
+ unsigned int fwclkctrl;
+ unsigned int resv4[10];
+ unsigned int usbclkctrl;
+ unsigned int resv5[1];
+ unsigned int sataclkctrl;
+ unsigned int resv6[4];
+ unsigned int ducaticlkctrl;
+ unsigned int pciclkctrl;
+};
+
+struct cm_alwon {
+ unsigned int l3slowclkstctrl;
+ unsigned int ethclkstctrl;
+ unsigned int l3medclkstctrl;
+ unsigned int mmu_clkstctrl;
+ unsigned int mmucfg_clkstctrl;
+ unsigned int ocmc0clkstctrl;
+#if defined(CONFIG_TI814X)
+ unsigned int vcpclkstctrl;
+#elif defined(CONFIG_TI816X)
+ unsigned int ocmc1clkstctrl;
+#endif
+ unsigned int mpuclkstctrl;
+ unsigned int sysclk4clkstctrl;
+ unsigned int sysclk5clkstctrl;
+ unsigned int sysclk6clkstctrl;
+ unsigned int rtcclkstctrl;
+ unsigned int l3fastclkstctrl;
+ unsigned int resv0[67];
+ unsigned int mcasp0clkctrl;
+ unsigned int mcasp1clkctrl;
+ unsigned int mcasp2clkctrl;
+ unsigned int mcbspclkctrl;
+ unsigned int uart0clkctrl;
+ unsigned int uart1clkctrl;
+ unsigned int uart2clkctrl;
+ unsigned int gpio0clkctrl;
+ unsigned int gpio1clkctrl;
+ unsigned int i2c0clkctrl;
+ unsigned int i2c1clkctrl;
+#if defined(CONFIG_TI814X)
+ unsigned int mcasp345clkctrl;
+ unsigned int atlclkctrl;
+ unsigned int mlbclkctrl;
+ unsigned int pataclkctrl;
+ unsigned int resv1[1];
+ unsigned int uart3clkctrl;
+ unsigned int uart4clkctrl;
+ unsigned int uart5clkctrl;
+#elif defined(CONFIG_TI816X)
+ unsigned int resv1[1];
+ unsigned int timer1clkctrl;
+ unsigned int timer2clkctrl;
+ unsigned int timer3clkctrl;
+ unsigned int timer4clkctrl;
+ unsigned int timer5clkctrl;
+ unsigned int timer6clkctrl;
+ unsigned int timer7clkctrl;
+#endif
+ unsigned int wdtimerclkctrl;
+ unsigned int spiclkctrl;
+ unsigned int mailboxclkctrl;
+ unsigned int spinboxclkctrl;
+ unsigned int mmudataclkctrl;
+ unsigned int resv2[2];
+ unsigned int mmucfgclkctrl;
+#if defined(CONFIG_TI814X)
+ unsigned int resv3[2];
+#elif defined(CONFIG_TI816X)
+ unsigned int resv3[1];
+ unsigned int sdioclkctrl;
+#endif
+ unsigned int ocmc0clkctrl;
+#if defined(CONFIG_TI814X)
+ unsigned int vcpclkctrl;
+#elif defined(CONFIG_TI816X)
+ unsigned int ocmc1clkctrl;
+#endif
+ unsigned int resv4[2];
+ unsigned int controlclkctrl;
+ unsigned int resv5[2];
+ unsigned int gpmcclkctrl;
+ unsigned int ethernet0clkctrl;
+ unsigned int ethernet1clkctrl;
+ unsigned int mpuclkctrl;
+#if defined(CONFIG_TI814X)
+ unsigned int debugssclkctrl;
+#elif defined(CONFIG_TI816X)
+ unsigned int resv6[1];
+#endif
+ unsigned int l3clkctrl;
+ unsigned int l4hsclkctrl;
+ unsigned int l4lsclkctrl;
+ unsigned int rtcclkctrl;
+ unsigned int tpccclkctrl;
+ unsigned int tptc0clkctrl;
+ unsigned int tptc1clkctrl;
+ unsigned int tptc2clkctrl;
+ unsigned int tptc3clkctrl;
+#if defined(CONFIG_TI814X)
+ unsigned int resv6[4];
+ unsigned int dcan01clkctrl;
+ unsigned int mmchs0clkctrl;
+ unsigned int mmchs1clkctrl;
+ unsigned int mmchs2clkctrl;
+ unsigned int custefuseclkctrl;
+#elif defined(CONFIG_TI816X)
+ unsigned int sr0clkctrl;
+ unsigned int sr1clkctrl;
+#endif
+};
+
+#endif /* _CLOCK_TI81XX_H_ */
@@ -200,37 +200,46 @@ struct ddr_data_regs {
* correspond to DATA1 registers defined here.
*/
struct ddr_regs {
- unsigned int resv0[7];
- unsigned int cm0csratio; /* offset 0x01C */
+ unsigned int resv0[3];
+ unsigned int cm0config; /* offset 0x00C */
+ unsigned int cm0configclk; /* offset 0x010 */
unsigned int resv1[2];
+ unsigned int cm0csratio; /* offset 0x01C */
+ unsigned int resv2[2];
unsigned int cm0dldiff; /* offset 0x028 */
unsigned int cm0iclkout; /* offset 0x02C */
- unsigned int resv2[8];
+ unsigned int resv3[4];
+ unsigned int cm1config; /* offset 0x040 */
+ unsigned int cm1configclk; /* offset 0x044 */
+ unsigned int resv4[2];
unsigned int cm1csratio; /* offset 0x050 */
- unsigned int resv3[2];
+ unsigned int resv5[2];
unsigned int cm1dldiff; /* offset 0x05C */
unsigned int cm1iclkout; /* offset 0x060 */
- unsigned int resv4[8];
+ unsigned int resv6[4];
+ unsigned int cm2config; /* offset 0x074 */
+ unsigned int cm2configclk; /* offset 0x078 */
+ unsigned int resv7[2];
unsigned int cm2csratio; /* offset 0x084 */
- unsigned int resv5[2];
+ unsigned int resv8[2];
unsigned int cm2dldiff; /* offset 0x090 */
unsigned int cm2iclkout; /* offset 0x094 */
- unsigned int resv6[12];
+ unsigned int resv9[12];
unsigned int dt0rdsratio0; /* offset 0x0C8 */
- unsigned int resv7[4];
+ unsigned int resv10[4];
unsigned int dt0wdsratio0; /* offset 0x0DC */
- unsigned int resv8[4];
+ unsigned int resv11[4];
unsigned int dt0wiratio0; /* offset 0x0F0 */
- unsigned int resv9;
+ unsigned int resv12;
unsigned int dt0wimode0; /* offset 0x0F8 */
unsigned int dt0giratio0; /* offset 0x0FC */
- unsigned int resv10;
+ unsigned int resv13;
unsigned int dt0gimode0; /* offset 0x104 */
unsigned int dt0fwsratio0; /* offset 0x108 */
- unsigned int resv11[4];
+ unsigned int resv14[4];
unsigned int dt0dqoffset; /* offset 0x11C */
unsigned int dt0wrsratio0; /* offset 0x120 */
- unsigned int resv12[4];
+ unsigned int resv15[4];
unsigned int dt0rdelays0; /* offset 0x134 */
unsigned int dt0dldiff0; /* offset 0x138 */
};
@@ -23,6 +23,8 @@
#include <asm/arch/omap.h>
#ifdef CONFIG_AM33XX
#include <asm/arch/hardware_am33xx.h>
+#elif defined(CONFIG_TI816X)
+#include <asm/arch/hardware_ti816x.h>
#elif defined(CONFIG_TI814X)
#include <asm/arch/hardware_ti814x.h>
#endif
@@ -67,15 +69,10 @@
/* DDR Base address */
#define DDR_CTRL_ADDR 0x44E10E04
#define DDR_CONTROL_BASE_ADDR 0x44E11404
-#define DDR_PHY_CMD_ADDR2 0x47C0C800
-#define DDR_PHY_DATA_ADDR2 0x47C0C8C8
/* UART */
#define DEFAULT_UART_BASE UART0_BASE
-#define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400)
-#define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE
-
/* GPMC Base address */
#define GPMC_BASE 0x50000000
@@ -43,8 +43,13 @@
/* DDR Base address */
#define DDR_PHY_CMD_ADDR 0x44E12000
#define DDR_PHY_DATA_ADDR 0x44E120C8
+#define DDR_PHY_CMD_ADDR2 0x47C0C800
+#define DDR_PHY_DATA_ADDR2 0x47C0C8C8
#define DDR_DATA_REGS_NR 2
+#define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400)
+#define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE
+
/* CPSW Config space */
#define CPSW_MDIO_BASE 0x4A101000
@@ -43,8 +43,13 @@
/* DDR Base address */
#define DDR_PHY_CMD_ADDR 0x47C0C400
#define DDR_PHY_DATA_ADDR 0x47C0C4C8
+#define DDR_PHY_CMD_ADDR2 0x47C0C800
+#define DDR_PHY_DATA_ADDR2 0x47C0C8C8
#define DDR_DATA_REGS_NR 4
+#define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400)
+#define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE
+
/* CPSW Config space */
#define CPSW_MDIO_BASE 0x4A100800
new file mode 100644
@@ -0,0 +1,57 @@
+/*
+ * hardware_ti816x.h
+ *
+ * TI816x hardware specific header
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ * Based on TI-PSP-04.00.02.14
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __AM33XX_HARDWARE_TI816X_H
+#define __AM33XX_HARDWARE_TI816X_H
+
+/* Watchdog Timer */
+#define WDT_BASE 0x480C2000
+
+/* Control Module Base Address */
+#define CTRL_BASE 0x48140000
+
+/* PRCM Base Address */
+#define PRCM_BASE 0x48180000
+
+/* VTP Base address */
+#define VTP0_CTRL_ADDR 0x48198358
+#define VTP1_CTRL_ADDR 0x4819A358
+
+/* DDR Base address */
+#define DDR_PHY_CMD_ADDR 0x48198000
+#define DDR_PHY_DATA_ADDR 0x481980C8
+#define DDR_PHY_CMD_ADDR2 0x4819A000
+#define DDR_PHY_DATA_ADDR2 0x4819A0C8
+#define DDR_DATA_REGS_NR 4
+
+/* UART */
+#define UART0_BASE 0x48020000
+#define UART1_BASE 0x48022000
+#define UART2_BASE 0x48024000
+
+#define DDRPHY_0_CONFIG_BASE 0x48198000
+#define DDRPHY_1_CONFIG_BASE 0x4819A000
+#define DDRPHY_CONFIG_BASE ((emif == 0) ? \
+ DDRPHY_0_CONFIG_BASE : DDRPHY_1_CONFIG_BASE)
+
+/* RTC base address */
+#define RTC_BASE 0x480C0000
+
+#endif /* __AM33XX_HARDWARE_TI816X_H */
@@ -27,6 +27,9 @@
#if defined(CONFIG_TI814X)
#undef MMC_CLOCK_REFERENCE
#define MMC_CLOCK_REFERENCE 192 /* MHz */
+#elif defined(CONFIG_TI816X)
+#undef MMC_CLOCK_REFERENCE
+#define MMC_CLOCK_REFERENCE 48 /* MHz */
#endif
#endif /* MMC_HOST_DEF_H */
@@ -23,6 +23,8 @@
#include <asm/arch/mux_am33xx.h>
#elif defined(CONFIG_TI814X)
#include <asm/arch/mux_ti814x.h>
+#elif defined(CONFIG_TI816X)
+#include <asm/arch/mux_ti816x.h>
#endif
struct module_pin_mux {
new file mode 100644
@@ -0,0 +1,363 @@
+/*
+ * mux_ti816x.h
+ *
+ * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
+ * Antoine Tenart, <atenart@adeneo-embedded.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MUX_TI816X_H_
+#define _MUX_TI816X_H_
+
+#include <common.h>
+#include <asm/io.h>
+
+#define MUX_CFG(value, offset) \
+ __raw_writel(value, (CTRL_BASE + offset));
+
+#define PULLDOWN_EN (0x0 << 4) /* Pull Down Selection */
+#define PULLUP_EN (0x1 << 4) /* Pull Up Selection */
+#define PULLUDEN (0x0 << 3) /* Pull up enabled */
+#define PULLUDDIS (0x1 << 3) /* Pull up disabled */
+#define MODE(val) (val) /* used for Readability */
+
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+ int pincntl1;
+ int pincntl2;
+ int pincntl3;
+ int pincntl4;
+ int pincntl5;
+ int pincntl6;
+ int pincntl7;
+ int pincntl8;
+ int pincntl9;
+ int pincntl10;
+ int pincntl11;
+ int pincntl12;
+ int pincntl13;
+ int pincntl14;
+ int pincntl15;
+ int pincntl16;
+ int pincntl17;
+ int pincntl18;
+ int pincntl19;
+ int pincntl20;
+ int pincntl21;
+ int pincntl22;
+ int pincntl23;
+ int pincntl24;
+ int pincntl25;
+ int pincntl26;
+ int pincntl27;
+ int pincntl28;
+ int pincntl29;
+ int pincntl30;
+ int pincntl31;
+ int pincntl32;
+ int pincntl33;
+ int pincntl34;
+ int pincntl35;
+ int pincntl36;
+ int pincntl37;
+ int pincntl38;
+ int pincntl39;
+ int pincntl40;
+ int pincntl41;
+ int pincntl42;
+ int pincntl43;
+ int pincntl44;
+ int pincntl45;
+ int pincntl46;
+ int pincntl47;
+ int pincntl48;
+ int pincntl49;
+ int pincntl50;
+ int pincntl51;
+ int pincntl52;
+ int pincntl53;
+ int pincntl54;
+ int pincntl55;
+ int pincntl56;
+ int pincntl57;
+ int pincntl58;
+ int pincntl59;
+ int pincntl60;
+ int pincntl61;
+ int pincntl62;
+ int pincntl63;
+ int pincntl64;
+ int pincntl65;
+ int pincntl66;
+ int pincntl67;
+ int pincntl68;
+ int pincntl69;
+ int pincntl70;
+ int pincntl71;
+ int pincntl72;
+ int pincntl73;
+ int pincntl74;
+ int pincntl75;
+ int pincntl76;
+ int pincntl77;
+ int pincntl78;
+ int pincntl79;
+ int pincntl80;
+ int pincntl81;
+ int pincntl82;
+ int pincntl83;
+ int pincntl84;
+ int pincntl85;
+ int pincntl86;
+ int pincntl87;
+ int pincntl88;
+ int pincntl89;
+ int pincntl90;
+ int pincntl91;
+ int pincntl92;
+ int pincntl93;
+ int pincntl94;
+ int pincntl95;
+ int pincntl96;
+ int pincntl97;
+ int pincntl98;
+ int pincntl99;
+ int pincntl100;
+ int pincntl101;
+ int pincntl102;
+ int pincntl103;
+ int pincntl104;
+ int pincntl105;
+ int pincntl106;
+ int pincntl107;
+ int pincntl108;
+ int pincntl109;
+ int pincntl110;
+ int pincntl111;
+ int pincntl112;
+ int pincntl113;
+ int pincntl114;
+ int pincntl115;
+ int pincntl116;
+ int pincntl117;
+ int pincntl118;
+ int pincntl119;
+ int pincntl120;
+ int pincntl121;
+ int pincntl122;
+ int pincntl123;
+ int pincntl124;
+ int pincntl125;
+ int pincntl126;
+ int pincntl127;
+ int pincntl128;
+ int pincntl129;
+ int pincntl130;
+ int pincntl131;
+ int pincntl132;
+ int pincntl133;
+ int pincntl134;
+ int pincntl135;
+ int pincntl136;
+ int pincntl137;
+ int pincntl138;
+ int pincntl139;
+ int pincntl140;
+ int pincntl141;
+ int pincntl142;
+ int pincntl143;
+ int pincntl144;
+ int pincntl145;
+ int pincntl146;
+ int pincntl147;
+ int pincntl148;
+ int pincntl149;
+ int pincntl150;
+ int pincntl151;
+ int pincntl152;
+ int pincntl153;
+ int pincntl154;
+ int pincntl155;
+ int pincntl156;
+ int pincntl157;
+ int pincntl158;
+ int pincntl159;
+ int pincntl160;
+ int pincntl161;
+ int pincntl162;
+ int pincntl163;
+ int pincntl164;
+ int pincntl165;
+ int pincntl166;
+ int pincntl167;
+ int pincntl168;
+ int pincntl169;
+ int pincntl170;
+ int pincntl171;
+ int pincntl172;
+ int pincntl173;
+ int pincntl174;
+ int pincntl175;
+ int pincntl176;
+ int pincntl177;
+ int pincntl178;
+ int pincntl179;
+ int pincntl180;
+ int pincntl181;
+ int pincntl182;
+ int pincntl183;
+ int pincntl184;
+ int pincntl185;
+ int pincntl186;
+ int pincntl187;
+ int pincntl188;
+ int pincntl189;
+ int pincntl190;
+ int pincntl191;
+ int pincntl192;
+ int pincntl193;
+ int pincntl194;
+ int pincntl195;
+ int pincntl196;
+ int pincntl197;
+ int pincntl198;
+ int pincntl199;
+ int pincntl200;
+ int pincntl201;
+ int pincntl202;
+ int pincntl203;
+ int pincntl204;
+ int pincntl205;
+ int pincntl206;
+ int pincntl207;
+ int pincntl208;
+ int pincntl209;
+ int pincntl210;
+ int pincntl211;
+ int pincntl212;
+ int pincntl213;
+ int pincntl214;
+ int pincntl215;
+ int pincntl216;
+ int pincntl217;
+ int pincntl218;
+ int pincntl219;
+ int pincntl220;
+ int pincntl221;
+ int pincntl222;
+ int pincntl223;
+ int pincntl224;
+ int pincntl225;
+ int pincntl226;
+ int pincntl227;
+ int pincntl228;
+ int pincntl229;
+ int pincntl230;
+ int pincntl231;
+ int pincntl232;
+ int pincntl233;
+ int pincntl234;
+ int pincntl235;
+ int pincntl236;
+ int pincntl237;
+ int pincntl238;
+ int pincntl239;
+ int pincntl240;
+ int pincntl241;
+ int pincntl242;
+ int pincntl243;
+ int pincntl244;
+ int pincntl245;
+ int pincntl246;
+ int pincntl247;
+ int pincntl248;
+ int pincntl249;
+ int pincntl250;
+ int pincntl251;
+ int pincntl252;
+ int pincntl253;
+ int pincntl254;
+ int pincntl255;
+ int pincntl256;
+ int pincntl257;
+ int pincntl258;
+ int pincntl259;
+ int pincntl260;
+ int pincntl261;
+ int pincntl262;
+ int pincntl263;
+ int pincntl264;
+ int pincntl265;
+ int pincntl266;
+ int pincntl267;
+ int pincntl268;
+ int pincntl269;
+ int pincntl270;
+ int pincntl271;
+ int pincntl272;
+ int pincntl273;
+ int pincntl274;
+ int pincntl275;
+ int pincntl276;
+ int pincntl277;
+ int pincntl278;
+ int pincntl279;
+ int pincntl280;
+ int pincntl281;
+ int pincntl282;
+ int pincntl283;
+ int pincntl284;
+ int pincntl285;
+ int pincntl286;
+ int pincntl287;
+ int pincntl288;
+ int pincntl289;
+ int pincntl290;
+ int pincntl291;
+ int pincntl292;
+ int pincntl293;
+ int pincntl294;
+ int pincntl295;
+ int pincntl296;
+ int pincntl297;
+ int pincntl298;
+ int pincntl299;
+ int pincntl300;
+ int pincntl301;
+ int pincntl302;
+ int pincntl303;
+ int pincntl304;
+ int pincntl305;
+ int pincntl306;
+ int pincntl307;
+ int pincntl308;
+ int pincntl309;
+ int pincntl310;
+ int pincntl311;
+ int pincntl312;
+ int pincntl313;
+ int pincntl314;
+ int pincntl315;
+ int pincntl316;
+ int pincntl317;
+ int pincntl318;
+ int pincntl319;
+ int pincntl320;
+ int pincntl321;
+ int pincntl322;
+ int pincntl323;
+};
+
+#endif /* endif _MUX_TI816X_H_ */
@@ -23,6 +23,14 @@
#ifndef _ASM_ARCH_SPL_H_
#define _ASM_SPL_H_
+#if defined(CONFIG_TI816X)
+#define BOOT_DEVICE_XIP 2
+#define BOOT_DEVICE_NAND 3
+#define BOOT_DEVICE_MMC1 6
+#define BOOT_DEVICE_MMC2 5
+#define BOOT_DEVICE_UART 0x43
+#define BOOT_DEVICE_MMC2_2 0xFF
+#else
#define BOOT_DEVICE_XIP 2
#define BOOT_DEVICE_NAND 5
#ifdef CONFIG_AM33XX
@@ -37,11 +45,12 @@
#define BOOT_DEVICE_USBETH 68
#define BOOT_DEVICE_CPGMAC 70
#define BOOT_DEVICE_MMC2_2 0xFF
+#endif
#ifdef CONFIG_AM33XX
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC1
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC2
-#elif defined(CONFIG_TI814X)
+#elif defined(CONFIG_TI81XX)
#define MMC_BOOT_DEVICES_START BOOT_DEVICE_MMC2
#define MMC_BOOT_DEVICES_END BOOT_DEVICE_MMC1
#endif
Signed-off-by: Antoine Tenart <atenart@adeneo-embedded.com> --- arch/arm/cpu/armv7/am33xx/Makefile | 1 + arch/arm/cpu/armv7/am33xx/clock_ti814x.c | 95 ---- arch/arm/cpu/armv7/am33xx/clock_ti816x.c | 529 ++++++++++++++++++++ arch/arm/cpu/armv7/am33xx/emif4.c | 2 + arch/arm/include/asm/arch-am33xx/clock.h | 4 + arch/arm/include/asm/arch-am33xx/clock_ti81xx.h | 142 ++++++ arch/arm/include/asm/arch-am33xx/ddr_defs.h | 35 +- arch/arm/include/asm/arch-am33xx/hardware.h | 7 +- arch/arm/include/asm/arch-am33xx/hardware_am33xx.h | 5 + arch/arm/include/asm/arch-am33xx/hardware_ti814x.h | 5 + arch/arm/include/asm/arch-am33xx/hardware_ti816x.h | 57 +++ arch/arm/include/asm/arch-am33xx/mmc_host_def.h | 3 + arch/arm/include/asm/arch-am33xx/mux.h | 2 + arch/arm/include/asm/arch-am33xx/mux_ti816x.h | 363 ++++++++++++++ arch/arm/include/asm/arch-am33xx/spl.h | 11 +- 15 files changed, 1147 insertions(+), 114 deletions(-) create mode 100644 arch/arm/cpu/armv7/am33xx/clock_ti816x.c create mode 100644 arch/arm/include/asm/arch-am33xx/clock_ti81xx.h create mode 100644 arch/arm/include/asm/arch-am33xx/hardware_ti816x.h create mode 100644 arch/arm/include/asm/arch-am33xx/mux_ti816x.h