Patchwork [v2] i2c: nomadik: allocate adapter number dynamically

login
register
mail settings
Submitter Linus Walleij
Date June 15, 2013, 8:38 p.m.
Message ID <1371328694-2073-1-git-send-email-linus.walleij@linaro.org>
Download mbox | patch
Permalink /patch/251639/
State Accepted
Headers show

Comments

Linus Walleij - June 15, 2013, 8:38 p.m.
The Nomadik I2C was using a local atomic counter to number
the I2C adapters. This does not work on configurations where
you also add, say a GPIO bit-banged adapter to the system.
They will start to conflict about being adapter 0.

There is no reason to use the numbered adapter function, and
the semantic effect on systems with only Nomadik I2C blocks
will be none - instead of increasing the number atomically
in the driver itself, it is done in the I2C core.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Drop the default assignment if -1 to adap->nt as we're now
  using i2c_add_adapter().
---
 drivers/i2c/busses/i2c-nomadik.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)
Wolfram Sang - June 15, 2013, 9:16 p.m.
On Sat, Jun 15, 2013 at 10:38:14PM +0200, Linus Walleij wrote:
> The Nomadik I2C was using a local atomic counter to number
> the I2C adapters. This does not work on configurations where
> you also add, say a GPIO bit-banged adapter to the system.
> They will start to conflict about being adapter 0.
> 
> There is no reason to use the numbered adapter function, and
> the semantic effect on systems with only Nomadik I2C blocks
> will be none - instead of increasing the number atomically
> in the driver itself, it is done in the I2C core.
> 
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Applied to for-next, thanks!

Patch

diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 9f1423a..063e726 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -15,7 +15,6 @@ 
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/amba/bus.h>
-#include <linux/atomic.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
@@ -981,8 +980,6 @@  static void nmk_i2c_of_probe(struct device_node *np,
 		pdata->sm = I2C_FREQ_MODE_FAST;
 }
 
-static atomic_t adapter_id = ATOMIC_INIT(0);
-
 static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	int ret = 0;
@@ -1095,10 +1092,8 @@  static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	adap->class	= I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo	= &nmk_i2c_algo;
 	adap->timeout	= msecs_to_jiffies(pdata->timeout);
-	adap->nr = atomic_read(&adapter_id);
 	snprintf(adap->name, sizeof(adap->name),
-		 "Nomadik I2C%d at %pR", adap->nr, &adev->res);
-	atomic_inc(&adapter_id);
+		 "Nomadik I2C at %pR", &adev->res);
 
 	/* fetch the controller configuration from machine */
 	dev->cfg.clk_freq = pdata->clk_freq;
@@ -1113,7 +1108,7 @@  static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 		 "initialize %s on virtual base %p\n",
 		 adap->name, dev->virtbase);
 
-	ret = i2c_add_numbered_adapter(adap);
+	ret = i2c_add_adapter(adap);
 	if (ret) {
 		dev_err(&adev->dev, "failed to add adapter\n");
 		goto err_add_adap;