Patchwork [6/6] mlx4_en: use NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM for tx csum at initialization

login
register
mail settings
Submitter Yevgeny Petrilin
Date March 26, 2009, 1:59 p.m.
Message ID <49CB8A57.8050507@mellanox.co.il>
Download mbox | patch
Permalink /patch/25155/
State Rejected
Delegated to: David Miller
Headers show

Comments

Yevgeny Petrilin - March 26, 2009, 1:59 p.m.
The former usage was to set the NETIF_F_HW_CSUM flag which is not used
in get_tx_csum. It caused Ethtool to show tx checksum as "on" even
though it was turned off in previous operation.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
---
 drivers/net/mlx4/en_netdev.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

Patch

diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c
index f52e897..0909a0c 100644
--- a/drivers/net/mlx4/en_netdev.c
+++ b/drivers/net/mlx4/en_netdev.c
@@ -1056,7 +1056,7 @@  int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
 	 * Set driver features
 	 */
 	dev->features |= NETIF_F_SG;
-	dev->features |= NETIF_F_HW_CSUM;
+	dev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
 	dev->features |= NETIF_F_HIGHDMA;
 	dev->features |= NETIF_F_HW_VLAN_TX |
 			 NETIF_F_HW_VLAN_RX |