Patchwork gianfar: reallocate skb when headroom is not enough for fcb

login
register
mail settings
Submitter Yang Li
Date March 25, 2009, 9:15 a.m.
Message ID <1237972533-11195-1-git-send-email-leoli@freescale.com>
Download mbox | patch
Permalink /patch/25062/
State Accepted
Delegated to: David Miller
Headers show

Comments

Yang Li - March 25, 2009, 9:15 a.m.
Gianfar uses a hardware header FCB for offloading.  However when used
with bridging or IP forwarding, TX skb might not have enough headroom
for the FCB.  Reallocate skb for such cases.

Signed-off-by: Li Yang <leoli@freescale.com>
---
 drivers/net/gianfar.c |   31 +++++++++++++++++++++----------
 1 files changed, 21 insertions(+), 10 deletions(-)

Patch

diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 9831b3f..29dc4ee 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -1206,10 +1206,19 @@  static int gfar_enet_open(struct net_device *dev)
 	return err;
 }
 
-static inline struct txfcb *gfar_add_fcb(struct sk_buff *skb)
+static inline struct txfcb *gfar_add_fcb(struct sk_buff **skbp)
 {
-	struct txfcb *fcb = (struct txfcb *)skb_push (skb, GMAC_FCB_LEN);
-
+	struct txfcb *fcb;
+	struct sk_buff *skb = *skbp;
+
+	if (unlikely(skb_headroom(skb) < GMAC_FCB_LEN)) {
+		struct sk_buff *old_skb = skb;
+		skb = skb_realloc_headroom(old_skb, GMAC_FCB_LEN);
+		if (!skb)
+			return NULL;
+		dev_kfree_skb_any(old_skb);
+	}
+	fcb = (struct txfcb *)skb_push(skb, GMAC_FCB_LEN);
 	cacheable_memzero(fcb, GMAC_FCB_LEN);
 
 	return fcb;
@@ -1330,18 +1339,20 @@  static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	/* Set up checksumming */
 	if (CHECKSUM_PARTIAL == skb->ip_summed) {
-		fcb = gfar_add_fcb(skb);
-		lstatus |= BD_LFLAG(TXBD_TOE);
-		gfar_tx_checksum(skb, fcb);
+		fcb = gfar_add_fcb(&skb);
+		if (likely(fcb != NULL)) {
+			lstatus |= BD_LFLAG(TXBD_TOE);
+			gfar_tx_checksum(skb, fcb);
+		}
 	}
 
 	if (priv->vlgrp && vlan_tx_tag_present(skb)) {
-		if (unlikely(NULL == fcb)) {
-			fcb = gfar_add_fcb(skb);
+		if (unlikely(NULL == fcb))
+			fcb = gfar_add_fcb(&skb);
+		if (likely(fcb != NULL)) {
 			lstatus |= BD_LFLAG(TXBD_TOE);
+			gfar_tx_vlan(skb, fcb);
 		}
-
-		gfar_tx_vlan(skb, fcb);
 	}
 
 	/* setup the TxBD length and buffer pointer for the first BD */