@@ -70,6 +70,7 @@ static const struct usb_device_id id_table_earthmate[] = {
static const struct usb_device_id id_table_cyphidcomrs232[] = {
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ } /* Terminating entry */
};
@@ -83,6 +84,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) },
{ USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) },
{ USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) },
+ { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) },
{ USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) },
{ } /* Terminating entry */
};
@@ -235,6 +237,12 @@ static struct usb_serial_driver * const serial_drivers[] = {
* Cypress serial helper functions
*****************************************************************************/
+/* FRWD Dongle hidcom needs to skip reset and speed checks */
+static inline bool is_frwd(struct usb_device *dev)
+{
+ return ((le16_to_cpu(dev->descriptor.idVendor) == VENDOR_ID_FRWD) &&
+ (le16_to_cpu(dev->descriptor.idProduct) == PRODUCT_ID_CYPHIDCOM_FRWD));
+}
static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
{
@@ -244,6 +252,10 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate)
if (unstable_bauds)
return new_rate;
+ /* FRWD Dongle uses 115200 bps */
+ if (is_frwd(port->serial->dev))
+ return new_rate;
+
/*
* The general purpose firmware for the Cypress M8 allows for
* a maximum speed of 57600bps (I have no idea whether DeLorme
@@ -452,7 +464,11 @@ static int generic_startup(struct usb_serial *serial)
return -ENOMEM;
}
- usb_reset_configuration(serial->dev);
+ /* Skip reset for FRWD device. It is a workaound:
+ device hangs if it receives SET_CONFIGURE in Configured
+ state. */
+ if (!is_frwd(serial->dev))
+ usb_reset_configuration(serial->dev);
priv->cmd_ctrl = 0;
priv->line_control = 0;
@@ -24,6 +24,10 @@
#define VENDOR_ID_CYPRESS 0x04b4
#define PRODUCT_ID_CYPHIDCOM 0x5500
+/* FRWD Dongle - a GPS sports watch */
+#define VENDOR_ID_FRWD 0x6737
+#define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001
+
/* Powercom UPS, chip CY7C63723 */
#define VENDOR_ID_POWERCOM 0x0d9f
#define PRODUCT_ID_UPS 0x0002
This is a note to let you know that I have just added a patch titled USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device to the linux-3.5.y-queue branch of the 3.5.y.z extended stable tree which can be found at: http://kernel.ubuntu.com/git?p=ubuntu/linux.git;a=shortlog;h=refs/heads/linux-3.5.y-queue If you, or anyone else, feels it should not be added to this tree, please reply to this email. For more information about the 3.5.y.z tree, see https://wiki.ubuntu.com/Kernel/Dev/ExtendedStable Thanks. -Luis ------ From 226b3c1c462b05159915742c91789d6ba46be55d Mon Sep 17 00:00:00 2001 From: Robert Butora <robert.butora.fi@gmail.com> Date: Fri, 31 May 2013 18:09:51 +0300 Subject: [PATCH] USB: Serial: cypress_M8: Enable FRWD Dongle hidcom device commit 6529591e3eef65f0f528a81ac169f6e294b947a7 upstream. The patch adds a new HIDCOM device and does not affect other devices driven by the cypress_M8 module. Changes are: - add VendorID ProductID to device tables - skip unstable speed check because FRWD uses 115200bps - skip reset at probe which is an issue workaround for this particular device. Signed-off-by: Robert Butora <robert.butora.fi@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Luis Henriques <luis.henriques@canonical.com> --- drivers/usb/serial/cypress_m8.c | 18 +++++++++++++++++- drivers/usb/serial/cypress_m8.h | 4 ++++ 2 files changed, 21 insertions(+), 1 deletion(-) -- 1.8.1.2