diff mbox

[2/3] ARM: mxc: add mx31pdk Lan9217 support

Message ID 4e090d470903232344x162ca791q3007954d064ccd00@mail.gmail.com
State Rejected, archived
Delegated to: David Miller
Headers show

Commit Message

Richard Zhao March 24, 2009, 6:44 a.m. UTC
Signed-off-by: Richard Zhao <linuxzsc@gmail.com>

Comments

Sascha Hauer March 24, 2009, 7:58 a.m. UTC | #1
On Tue, Mar 24, 2009 at 02:44:41PM +0800, Richard Zhao wrote:
> Signed-off-by: Richard Zhao <linuxzsc@gmail.com>
> 
> diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
> index aa7e3c5..45cef70 100644
> --- a/arch/arm/mach-mx3/mx31pdk.c
> +++ b/arch/arm/mach-mx3/mx31pdk.c
> @@ -32,6 +32,8 @@
>  #include <mach/board-mx31pdk.h>
>  #include <mach/imx-uart.h>
>  #include <mach/iomux-mx3.h>
> +#include <linux/platform_device.h>
> +#include <linux/smsc911x.h>
>  #include "devices.h"
>  #include "3stack-debug.h"
> 
> @@ -57,6 +59,43 @@ static inline void mxc_init_imx_uart(void)
>  	mxc_register_device(&mxc_uart_device0, &uart_pdata);
>  }
> 
> +/*lan9217 device*/
> +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)

IMO it is not worth to clutter the code with ifdefs just to save some
bytes of binary space, but ok, that's just my two cents.

> +static struct resource smsc911x_resources[] = {
> +	{
> +	 .start = LAN9217_BASE_ADDR,
> +	 .end = LAN9217_BASE_ADDR + 0x100,
> +	 .flags = IORESOURCE_MEM,
> +	 },
> +	{
> +	 .start = LAN9217_IRQ,
> +	 .end = LAN9217_IRQ,
> +	 .flags = IORESOURCE_IRQ,
> +	 },
> +};

static struct resource smsc911x_resources[] = {
	{
		.start = LAN9217_BASE_ADDR,
		.end = LAN9217_BASE_ADDR + 0x100,
		.flags = IORESOURCE_MEM,
	},{
		.start = LAN9217_IRQ,
		.end = LAN9217_IRQ,
		.flags = IORESOURCE_IRQ,
	},
};

> +
> +static struct smsc911x_platform_config smsc911x_platconfig = {
> +	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
> +	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
> +	.flags		= SMSC911X_USE_16BIT | SMSC911X_USE_INTERPHY,
> +};
> +
> +static struct platform_device smsc_lan9217_device = {
> +	.name = "smsc911x",
> +	.id = 0,
> +	.num_resources = ARRAY_SIZE(smsc911x_resources),
> +	.resource = smsc911x_resources,
> +};
> +static void mxc_init_enet(void)
> +{
> +	mxc_register_device(&smsc_lan9217_device, &smsc911x_platconfig);
> +}
> +#else
> +static inline void mxc_init_enet(void)
> +{
> +}
> +#endif
> +
>  static u32 brd_io;
> 
>  static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
> @@ -217,6 +256,7 @@ static void __init mxc_board_init(void)
>  {
>  	mxc_init_imx_uart();
>  	mxc_expio_init();
> +	mxc_init_enet();
>  }
> 
>  static void __init mx31pdk_timer_init(void)
> -- 
> 1.5.6.3
>
Richard Zhao March 24, 2009, 8:59 a.m. UTC | #2
On Tue, Mar 24, 2009 at 3:58 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Tue, Mar 24, 2009 at 02:44:41PM +0800, Richard Zhao wrote:
>> Signed-off-by: Richard Zhao <linuxzsc@gmail.com>
>>
>> diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
>> index aa7e3c5..45cef70 100644
>> --- a/arch/arm/mach-mx3/mx31pdk.c
>> +++ b/arch/arm/mach-mx3/mx31pdk.c
>> @@ -32,6 +32,8 @@
>>  #include <mach/board-mx31pdk.h>
>>  #include <mach/imx-uart.h>
>>  #include <mach/iomux-mx3.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/smsc911x.h>
>>  #include "devices.h"
>>  #include "3stack-debug.h"
>>
>> @@ -57,6 +59,43 @@ static inline void mxc_init_imx_uart(void)
>>       mxc_register_device(&mxc_uart_device0, &uart_pdata);
>>  }
>>
>> +/*lan9217 device*/
>> +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
>
> IMO it is not worth to clutter the code with ifdefs just to save some
> bytes of binary space, but ok, that's just my two cents.
>
Hi Sascha,

ok, I will remove the ifdefs.

Thanks
Richard
>> +static struct resource smsc911x_resources[] = {
>> +     {
>> +      .start = LAN9217_BASE_ADDR,
>> +      .end = LAN9217_BASE_ADDR + 0x100,
>> +      .flags = IORESOURCE_MEM,
>> +      },
>> +     {
>> +      .start = LAN9217_IRQ,
>> +      .end = LAN9217_IRQ,
>> +      .flags = IORESOURCE_IRQ,
>> +      },
>> +};
>
> static struct resource smsc911x_resources[] = {
>        {
>                .start = LAN9217_BASE_ADDR,
>                .end = LAN9217_BASE_ADDR + 0x100,
>                .flags = IORESOURCE_MEM,
>        },{
>                .start = LAN9217_IRQ,
>                .end = LAN9217_IRQ,
>                .flags = IORESOURCE_IRQ,
>        },
> };
>
>> +
>> +static struct smsc911x_platform_config smsc911x_platconfig = {
>> +     .irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
>> +     .irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
>> +     .flags          = SMSC911X_USE_16BIT | SMSC911X_USE_INTERPHY,
>> +};
>> +
>> +static struct platform_device smsc_lan9217_device = {
>> +     .name = "smsc911x",
>> +     .id = 0,
>> +     .num_resources = ARRAY_SIZE(smsc911x_resources),
>> +     .resource = smsc911x_resources,
>> +};
>> +static void mxc_init_enet(void)
>> +{
>> +     mxc_register_device(&smsc_lan9217_device, &smsc911x_platconfig);
>> +}
>> +#else
>> +static inline void mxc_init_enet(void)
>> +{
>> +}
>> +#endif
>> +
>>  static u32 brd_io;
>>
>>  static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
>> @@ -217,6 +256,7 @@ static void __init mxc_board_init(void)
>>  {
>>       mxc_init_imx_uart();
>>       mxc_expio_init();
>> +     mxc_init_enet();
>>  }
>>
>>  static void __init mx31pdk_timer_init(void)
>> --
>> 1.5.6.3
>>
>
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index aa7e3c5..45cef70 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -32,6 +32,8 @@ 
 #include <mach/board-mx31pdk.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
 #include "devices.h"
 #include "3stack-debug.h"

@@ -57,6 +59,43 @@  static inline void mxc_init_imx_uart(void)
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 }

+/*lan9217 device*/
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct resource smsc911x_resources[] = {
+	{
+	 .start = LAN9217_BASE_ADDR,
+	 .end = LAN9217_BASE_ADDR + 0x100,
+	 .flags = IORESOURCE_MEM,
+	 },
+	{
+	 .start = LAN9217_IRQ,
+	 .end = LAN9217_IRQ,
+	 .flags = IORESOURCE_IRQ,
+	 },
+};
+
+static struct smsc911x_platform_config smsc911x_platconfig = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_USE_INTERPHY,
+};
+
+static struct platform_device smsc_lan9217_device = {
+	.name = "smsc911x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smsc911x_resources),
+	.resource = smsc911x_resources,
+};
+static void mxc_init_enet(void)
+{
+	mxc_register_device(&smsc_lan9217_device, &smsc911x_platconfig);
+}
+#else
+static inline void mxc_init_enet(void)
+{
+}
+#endif
+
 static u32 brd_io;

 static void mxc_expio_irq_handler(u32 irq, struct irq_desc *desc)
@@ -217,6 +256,7 @@  static void __init mxc_board_init(void)
 {
 	mxc_init_imx_uart();
 	mxc_expio_init();
+	mxc_init_enet();
 }

 static void __init mx31pdk_timer_init(void)