diff mbox

[U-Boot,v2] arm, am33xx: move rtc32k_enable() to common place

Message ID 1370411276-8421-1-git-send-email-hs@denx.de
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Heiko Schocher June 5, 2013, 5:47 a.m. UTC 
move rtc32k_enable() to common place so all am33xx boards can use it.

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Matt Porter <mporter@ti.com>
Cc: Lars Poeschel <poeschel@lemonage.de>
Cc: Tom Rini <trini@ti.com>
Cc: Enric Balletbo i Serra <eballetbo@iseebcn.com>

---
- changes for v2:
  remove ifdef around prototype, as Tom Rini suggested

 arch/arm/cpu/armv7/am33xx/board.c            | 18 ++++++++++++++++++
 arch/arm/include/asm/arch-am33xx/sys_proto.h |  2 ++
 board/isee/igep0033/board.c                  | 16 ----------------
 board/phytec/pcm051/board.c                  | 16 ----------------
 board/ti/am335x/board.c                      | 16 ----------------
 board/ti/ti814x/evm.c                        | 16 ----------------
 6 Dateien geändert, 20 Zeilen hinzugefügt(+), 64 Zeilen entfernt(-)
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 885fb2d..d3b3612 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -149,3 +149,21 @@  int arch_misc_init(void)
 #endif
 	return 0;
 }
+
+#ifdef CONFIG_SPL_BUILD
+void rtc32k_enable(void)
+{
+	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
+
+	/*
+	 * Unlock the RTC's registers.  For more details please see the
+	 * RTC_SS section of the TRM.  In order to unlock we need to
+	 * write these specific values (keys) in this order.
+	 */
+	writel(0x83e70b13, &rtc->kick0r);
+	writel(0x95a4f1e0, &rtc->kick1r);
+
+	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
+	writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+#endif
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index c913b5f..f76b17c 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -40,4 +40,6 @@  void gpmc_init(void);
 void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base,
 			u32 size);
 void omap_nand_switch_ecc(uint32_t, uint32_t);
+
+void rtc32k_enable(void);
 #endif
diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c
index d315516..e82d722 100644
--- a/board/isee/igep0033/board.c
+++ b/board/isee/igep0033/board.c
@@ -51,22 +51,6 @@  static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 #define UART_CLK_RUNNING_MASK	0x1
 #define UART_SMART_IDLE_EN	(0x1 << 0x3)
 
-static void rtc32k_enable(void)
-{
-	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
-	/*
-	 * Unlock the RTC's registers.  For more details please see the
-	 * RTC_SS section of the TRM.  In order to unlock we need to
-	 * write these specific values (keys) in this order.
-	 */
-	writel(0x83e70b13, &rtc->kick0r);
-	writel(0x95a4f1e0, &rtc->kick1r);
-
-	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
-	writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
 static const struct ddr_data ddr3_data = {
 	.datardsratio0 = K4B2G1646EBIH9_RD_DQS,
 	.datawdsratio0 = K4B2G1646EBIH9_WR_DQS,
diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c
index 9ea50e1..6c0993a 100644
--- a/board/phytec/pcm051/board.c
+++ b/board/phytec/pcm051/board.c
@@ -59,22 +59,6 @@  static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 /* DDR RAM defines */
 #define DDR_CLK_MHZ		303 /* DDR_DPLL_MULT value */
 
-static void rtc32k_enable(void)
-{
-	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
-	/*
-	 * Unlock the RTC's registers.  For more details please see the
-	 * RTC_SS section of the TRM.  In order to unlock we need to
-	 * write these specific values (keys) in this order.
-	 */
-	writel(0x83e70b13, &rtc->kick0r);
-	writel(0x95a4f1e0, &rtc->kick1r);
-
-	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
-	writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
 static const struct ddr_data ddr3_data = {
 	.datardsratio0 = MT41J256M8HX15E_RD_DQS,
 	.datawdsratio0 = MT41J256M8HX15E_WR_DQS,
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index e52b009..bf25878 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -132,22 +132,6 @@  static int read_eeprom(void)
 #define UART_CLK_RUNNING_MASK	0x1
 #define UART_SMART_IDLE_EN	(0x1 << 0x3)
 
-static void rtc32k_enable(void)
-{
-	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
-	/*
-	 * Unlock the RTC's registers.  For more details please see the
-	 * RTC_SS section of the TRM.  In order to unlock we need to
-	 * write these specific values (keys) in this order.
-	 */
-	writel(0x83e70b13, &rtc->kick0r);
-	writel(0x95a4f1e0, &rtc->kick1r);
-
-	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
-	writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
 static const struct ddr_data ddr2_data = {
 	.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
 			  (MT47H128M16RT25E_RD_DQS<<20) |
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
index 7adb524..0049c4b 100644
--- a/board/ti/ti814x/evm.c
+++ b/board/ti/ti814x/evm.c
@@ -48,22 +48,6 @@  static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 #define UART_CLK_RUNNING_MASK	0x1
 #define UART_SMART_IDLE_EN	(0x1 << 0x3)
 
-static void rtc32k_enable(void)
-{
-	struct rtc_regs *rtc = (struct rtc_regs *)RTC_BASE;
-
-	/*
-	 * Unlock the RTC's registers.  For more details please see the
-	 * RTC_SS section of the TRM.  In order to unlock we need to
-	 * write these specific values (keys) in this order.
-	 */
-	writel(0x83e70b13, &rtc->kick0r);
-	writel(0x95a4f1e0, &rtc->kick1r);
-
-	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
-	writel((1 << 3) | (1 << 6), &rtc->osc);
-}
-
 static void uart_enable(void)
 {
 	u32 regVal;