diff mbox

[U-Boot,v2,15/16] sf: Remove spi_flash_cmd_poll_bit()

Message ID d7a092b2-15da-4d6e-b6fa-02e94ff7e739@CO9EHSMHS018.ehs.local
State Superseded
Delegated to: Jagannadha Sutradharudu Teki
Headers show

Commit Message

Jagannadha Sutradharudu Teki May 31, 2013, 12:52 p.m. UTC 
There is no other call other than spi_flash_cmd_wait_ready(),
hence removed spi_flash_cmd_poll_bit and use the poll status code
spi_flash_cmd_wait_ready() itself.

Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
---
Changes for v2:
        - none

 drivers/mtd/spi/spi_flash.c          | 11 +++--------
 drivers/mtd/spi/spi_flash_internal.h |  4 ----
 2 files changed, 3 insertions(+), 12 deletions(-)
diff mbox

Patch

diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 765d4bc..527423d 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -190,12 +190,13 @@  int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
 	return ret;
 }
 
-int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
-			   u8 cmd, u8 poll_bit)
+int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
 {
 	unsigned long timebase;
 	int ret;
 	u8 status;
+	u8 poll_bit = STATUS_WIP;
+	u8 cmd = CMD_READ_STATUS;
 
 	timebase = get_timer(0);
 	do {
@@ -220,12 +221,6 @@  int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
 	return -1;
 }
 
-int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
-{
-	return spi_flash_cmd_poll_bit(flash, timeout,
-		CMD_READ_STATUS, STATUS_WIP);
-}
-
 int spi_flash_cmd_erase(struct spi_flash *flash, u32 offset, size_t len)
 {
 	u32 erase_size;
diff --git a/drivers/mtd/spi/spi_flash_internal.h b/drivers/mtd/spi/spi_flash_internal.h
index 455dc02..ac4530f 100644
--- a/drivers/mtd/spi/spi_flash_internal.h
+++ b/drivers/mtd/spi/spi_flash_internal.h
@@ -98,10 +98,6 @@  int spi_flash_cmd_bankaddr_read(struct spi_flash *flash, void *data);
 int spi_flash_read_common(struct spi_flash *flash, const u8 *cmd,
 		size_t cmd_len, void *data, size_t data_len);
 
-/* Send a command to the device and wait for some bit to clear itself. */
-int spi_flash_cmd_poll_bit(struct spi_flash *flash, unsigned long timeout,
-			   u8 cmd, u8 poll_bit);
-
 /*
  * Send the read status command to the device and wait for the wip
  * (write-in-progress) bit to clear itself.