diff mbox

[v2,4/6] net: emaclite: Do not use microblaze and ppc IO functions

Message ID f05f284653ddf7d812ba0a6bd0e271736e910a37.1369909618.git.michal.simek@xilinx.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Michal Simek May 30, 2013, 10:28 a.m. UTC 
Emaclite can be used on ARM zynq where in_be32/out_be32 IO
functions are not present. Use standard __raw_readl/__raw_writel
IO functions instead.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
---
Changes in v2:
- Fix __raw_iowrite() to pass correct parameters

 drivers/net/ethernet/xilinx/xilinx_emaclite.c | 138 +++++++++++++-------------
 1 file changed, 69 insertions(+), 69 deletions(-)

--
1.8.2.3
diff mbox

Patch

diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 93bb14e..9227ed7 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -159,34 +159,32 @@  static void xemaclite_enable_interrupts(struct net_local *drvdata)
 	u32 reg_data;

 	/* Enable the Tx interrupts for the first Buffer */
-	reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
-	out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
-		 reg_data | XEL_TSR_XMIT_IE_MASK);
+	reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET);
+	__raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
+		     drvdata->base_addr + XEL_TSR_OFFSET);

 	/* Enable the Tx interrupts for the second Buffer if
 	 * configured in HW */
 	if (drvdata->tx_ping_pong != 0) {
-		reg_data = in_be32(drvdata->base_addr +
+		reg_data = __raw_readl(drvdata->base_addr +
 				   XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
-		out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
-			 XEL_TSR_OFFSET,
-			 reg_data | XEL_TSR_XMIT_IE_MASK);
+		__raw_writel(reg_data | XEL_TSR_XMIT_IE_MASK,
+			     drvdata->base_addr + XEL_BUFFER_OFFSET +
+			     XEL_TSR_OFFSET);
 	}

 	/* Enable the Rx interrupts for the first buffer */
-	out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
-		 XEL_RSR_RECV_IE_MASK);
+	__raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr + XEL_RSR_OFFSET);

 	/* Enable the Rx interrupts for the second Buffer if
 	 * configured in HW */
 	if (drvdata->rx_ping_pong != 0) {
-		out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
-			 XEL_RSR_OFFSET,
-			 XEL_RSR_RECV_IE_MASK);
+		__raw_writel(XEL_RSR_RECV_IE_MASK, drvdata->base_addr +
+			     XEL_BUFFER_OFFSET + XEL_RSR_OFFSET);
 	}

 	/* Enable the Global Interrupt Enable */
-	out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+	__raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET);
 }

 /**
@@ -201,37 +199,37 @@  static void xemaclite_disable_interrupts(struct net_local *drvdata)
 	u32 reg_data;

 	/* Disable the Global Interrupt Enable */
-	out_be32(drvdata->base_addr + XEL_GIER_OFFSET, XEL_GIER_GIE_MASK);
+	__raw_writel(XEL_GIER_GIE_MASK, drvdata->base_addr + XEL_GIER_OFFSET);

 	/* Disable the Tx interrupts for the first buffer */
-	reg_data = in_be32(drvdata->base_addr + XEL_TSR_OFFSET);
-	out_be32(drvdata->base_addr + XEL_TSR_OFFSET,
-		 reg_data & (~XEL_TSR_XMIT_IE_MASK));
+	reg_data = __raw_readl(drvdata->base_addr + XEL_TSR_OFFSET);
+	__raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
+		     drvdata->base_addr + XEL_TSR_OFFSET);

 	/* Disable the Tx interrupts for the second Buffer
 	 * if configured in HW */
 	if (drvdata->tx_ping_pong != 0) {
-		reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+		reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
 				   XEL_TSR_OFFSET);
-		out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
-			 XEL_TSR_OFFSET,
-			 reg_data & (~XEL_TSR_XMIT_IE_MASK));
+		__raw_writel(reg_data & (~XEL_TSR_XMIT_IE_MASK),
+			     drvdata->base_addr + XEL_BUFFER_OFFSET +
+			     XEL_TSR_OFFSET);
 	}

 	/* Disable the Rx interrupts for the first buffer */
-	reg_data = in_be32(drvdata->base_addr + XEL_RSR_OFFSET);
-	out_be32(drvdata->base_addr + XEL_RSR_OFFSET,
-		 reg_data & (~XEL_RSR_RECV_IE_MASK));
+	reg_data = __raw_readl(drvdata->base_addr + XEL_RSR_OFFSET);
+	__raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
+		     drvdata->base_addr + XEL_RSR_OFFSET);

 	/* Disable the Rx interrupts for the second buffer
 	 * if configured in HW */
 	if (drvdata->rx_ping_pong != 0) {

-		reg_data = in_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
+		reg_data = __raw_readl(drvdata->base_addr + XEL_BUFFER_OFFSET +
 				   XEL_RSR_OFFSET);
-		out_be32(drvdata->base_addr + XEL_BUFFER_OFFSET +
-			 XEL_RSR_OFFSET,
-			 reg_data & (~XEL_RSR_RECV_IE_MASK));
+		__raw_writel(reg_data & (~XEL_RSR_RECV_IE_MASK),
+			     drvdata->base_addr + XEL_BUFFER_OFFSET +
+			     XEL_RSR_OFFSET);
 	}
 }

@@ -351,7 +349,7 @@  static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
 		byte_count = ETH_FRAME_LEN;

 	/* Check if the expected buffer is available */
-	reg_data = in_be32(addr + XEL_TSR_OFFSET);
+	reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
 	if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
 	     XEL_TSR_XMIT_ACTIVE_MASK)) == 0) {

@@ -364,7 +362,7 @@  static int xemaclite_send_data(struct net_local *drvdata, u8 *data,

 		addr = (void __iomem __force *)((u32 __force)addr ^
 						 XEL_BUFFER_OFFSET);
-		reg_data = in_be32(addr + XEL_TSR_OFFSET);
+		reg_data = __raw_readl(addr + XEL_TSR_OFFSET);

 		if ((reg_data & (XEL_TSR_XMIT_BUSY_MASK |
 		     XEL_TSR_XMIT_ACTIVE_MASK)) != 0)
@@ -375,15 +373,16 @@  static int xemaclite_send_data(struct net_local *drvdata, u8 *data,
 	/* Write the frame to the buffer */
 	xemaclite_aligned_write(data, (u32 __force *) addr, byte_count);

-	out_be32(addr + XEL_TPLR_OFFSET, (byte_count & XEL_TPLR_LENGTH_MASK));
+	__raw_writel((byte_count & XEL_TPLR_LENGTH_MASK),
+		     addr + XEL_TPLR_OFFSET);

 	/* Update the Tx Status Register to indicate that there is a
 	 * frame to send. Set the XEL_TSR_XMIT_ACTIVE_MASK flag which
 	 * is used by the interrupt handler to check whether a frame
 	 * has been transmitted */
-	reg_data = in_be32(addr + XEL_TSR_OFFSET);
+	reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
 	reg_data |= (XEL_TSR_XMIT_BUSY_MASK | XEL_TSR_XMIT_ACTIVE_MASK);
-	out_be32(addr + XEL_TSR_OFFSET, reg_data);
+	__raw_writel(reg_data, addr + XEL_TSR_OFFSET);

 	return 0;
 }
@@ -408,7 +407,7 @@  static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
 	addr = (drvdata->base_addr + drvdata->next_rx_buf_to_use);

 	/* Verify which buffer has valid data */
-	reg_data = in_be32(addr + XEL_RSR_OFFSET);
+	reg_data = __raw_readl(addr + XEL_RSR_OFFSET);

 	if ((reg_data & XEL_RSR_RECV_DONE_MASK) == XEL_RSR_RECV_DONE_MASK) {
 		if (drvdata->rx_ping_pong != 0)
@@ -425,14 +424,14 @@  static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
 			return 0;	/* No data was available */

 		/* Verify that buffer has valid data */
-		reg_data = in_be32(addr + XEL_RSR_OFFSET);
+		reg_data = __raw_readl(addr + XEL_RSR_OFFSET);
 		if ((reg_data & XEL_RSR_RECV_DONE_MASK) !=
 		     XEL_RSR_RECV_DONE_MASK)
 			return 0;	/* No data was available */
 	}

 	/* Get the protocol type of the ethernet frame that arrived */
-	proto_type = ((ntohl(in_be32(addr + XEL_HEADER_OFFSET +
+	proto_type = ((ntohl(__raw_readl(addr + XEL_HEADER_OFFSET +
 			XEL_RXBUFF_OFFSET)) >> XEL_HEADER_SHIFT) &
 			XEL_RPLR_LENGTH_MASK);

@@ -441,7 +440,7 @@  static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
 	if (proto_type > (ETH_FRAME_LEN + ETH_FCS_LEN)) {

 		if (proto_type == ETH_P_IP) {
-			length = ((ntohl(in_be32(addr +
+			length = ((ntohl(__raw_readl(addr +
 					XEL_HEADER_IP_LENGTH_OFFSET +
 					XEL_RXBUFF_OFFSET)) >>
 					XEL_HEADER_SHIFT) &
@@ -463,9 +462,9 @@  static u16 xemaclite_recv_data(struct net_local *drvdata, u8 *data)
 				data, length);

 	/* Acknowledge the frame */
-	reg_data = in_be32(addr + XEL_RSR_OFFSET);
+	reg_data = __raw_readl(addr + XEL_RSR_OFFSET);
 	reg_data &= ~XEL_RSR_RECV_DONE_MASK;
-	out_be32(addr + XEL_RSR_OFFSET, reg_data);
+	__raw_writel(reg_data, addr + XEL_RSR_OFFSET);

 	return length;
 }
@@ -492,14 +491,14 @@  static void xemaclite_update_address(struct net_local *drvdata,

 	xemaclite_aligned_write(address_ptr, (u32 __force *) addr, ETH_ALEN);

-	out_be32(addr + XEL_TPLR_OFFSET, ETH_ALEN);
+	__raw_writel(ETH_ALEN, addr + XEL_TPLR_OFFSET);

 	/* Update the MAC address in the EmacLite */
-	reg_data = in_be32(addr + XEL_TSR_OFFSET);
-	out_be32(addr + XEL_TSR_OFFSET, reg_data | XEL_TSR_PROG_MAC_ADDR);
+	reg_data = __raw_readl(addr + XEL_TSR_OFFSET);
+	__raw_writel(reg_data | XEL_TSR_PROG_MAC_ADDR, addr + XEL_TSR_OFFSET);

 	/* Wait for EmacLite to finish with the MAC address update */
-	while ((in_be32(addr + XEL_TSR_OFFSET) &
+	while ((__raw_readl(addr + XEL_TSR_OFFSET) &
 		XEL_TSR_PROG_MAC_ADDR) != 0)
 		;
 }
@@ -669,31 +668,32 @@  static irqreturn_t xemaclite_interrupt(int irq, void *dev_id)
 	u32 tx_status;

 	/* Check if there is Rx Data available */
-	if ((in_be32(base_addr + XEL_RSR_OFFSET) & XEL_RSR_RECV_DONE_MASK) ||
-			(in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET)
+	if ((__raw_readl(base_addr + XEL_RSR_OFFSET) &
+			 XEL_RSR_RECV_DONE_MASK) ||
+	    (__raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_RSR_OFFSET)
 			 & XEL_RSR_RECV_DONE_MASK))

 		xemaclite_rx_handler(dev);

 	/* Check if the Transmission for the first buffer is completed */
-	tx_status = in_be32(base_addr + XEL_TSR_OFFSET);
+	tx_status = __raw_readl(base_addr + XEL_TSR_OFFSET);
 	if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
 		(tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {

 		tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
-		out_be32(base_addr + XEL_TSR_OFFSET, tx_status);
+		__raw_writel(tx_status, base_addr + XEL_TSR_OFFSET);

 		tx_complete = true;
 	}

 	/* Check if the Transmission for the second buffer is completed */
-	tx_status = in_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
+	tx_status = __raw_readl(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);
 	if (((tx_status & XEL_TSR_XMIT_BUSY_MASK) == 0) &&
 		(tx_status & XEL_TSR_XMIT_ACTIVE_MASK) != 0) {

 		tx_status &= ~XEL_TSR_XMIT_ACTIVE_MASK;
-		out_be32(base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET,
-			 tx_status);
+		__raw_writel(tx_status, base_addr + XEL_BUFFER_OFFSET +
+			     XEL_TSR_OFFSET);

 		tx_complete = true;
 	}
@@ -726,7 +726,7 @@  static int xemaclite_mdio_wait(struct net_local *lp)
 	/* wait for the MDIO interface to not be busy or timeout
 	   after some time.
 	*/
-	while (in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
+	while (__raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET) &
 			XEL_MDIOCTRL_MDIOSTS_MASK) {
 		if (end - jiffies <= 0) {
 			WARN_ON(1);
@@ -762,17 +762,17 @@  static int xemaclite_mdio_read(struct mii_bus *bus, int phy_id, int reg)
 	 * MDIO Address register. Set the Status bit in the MDIO Control
 	 * register to start a MDIO read transaction.
 	 */
-	ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
-	out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
-		 XEL_MDIOADDR_OP_MASK |
-		 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
-	out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
-		 ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+	ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+	__raw_writel(XEL_MDIOADDR_OP_MASK |
+		     ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg),
+		     lp->base_addr + XEL_MDIOADDR_OFFSET);
+	__raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK,
+		     lp->base_addr + XEL_MDIOCTRL_OFFSET);

 	if (xemaclite_mdio_wait(lp))
 		return -ETIMEDOUT;

-	rc = in_be32(lp->base_addr + XEL_MDIORD_OFFSET);
+	rc = __raw_readl(lp->base_addr + XEL_MDIORD_OFFSET);

 	dev_dbg(&lp->ndev->dev,
 		"xemaclite_mdio_read(phy_id=%i, reg=%x) == %x\n",
@@ -809,13 +809,13 @@  static int xemaclite_mdio_write(struct mii_bus *bus, int phy_id, int reg,
 	 * Data register. Finally, set the Status bit in the MDIO Control
 	 * register to start a MDIO write transaction.
 	 */
-	ctrl_reg = in_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET);
-	out_be32(lp->base_addr + XEL_MDIOADDR_OFFSET,
-		 ~XEL_MDIOADDR_OP_MASK &
-		 ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg));
-	out_be32(lp->base_addr + XEL_MDIOWR_OFFSET, val);
-	out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
-		 ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK);
+	ctrl_reg = __raw_readl(lp->base_addr + XEL_MDIOCTRL_OFFSET);
+	__raw_writel(~XEL_MDIOADDR_OP_MASK &
+		     ((phy_id << XEL_MDIOADDR_PHYADR_SHIFT) | reg),
+		     lp->base_addr + XEL_MDIOADDR_OFFSET);
+	__raw_writel(val, lp->base_addr + XEL_MDIOWR_OFFSET);
+	__raw_writel(ctrl_reg | XEL_MDIOCTRL_MDIOSTS_MASK,
+		     lp->base_addr + XEL_MDIOCTRL_OFFSET);

 	return 0;
 }
@@ -872,8 +872,8 @@  static int xemaclite_mdio_setup(struct net_local *lp, struct device *dev)
 	/* Enable the MDIO bus by asserting the enable bit in MDIO Control
 	 * register.
 	 */
-	out_be32(lp->base_addr + XEL_MDIOCTRL_OFFSET,
-		 XEL_MDIOCTRL_MDIOEN_MASK);
+	__raw_writel(XEL_MDIOCTRL_MDIOEN_MASK,
+		     lp->base_addr + XEL_MDIOCTRL_OFFSET);

 	bus = mdiobus_alloc();
 	if (!bus) {
@@ -1197,8 +1197,8 @@  static int xemaclite_of_probe(struct platform_device *ofdev)
 		dev_warn(dev, "No MAC address found\n");

 	/* Clear the Tx CSR's in case this is a restart */
-	out_be32(lp->base_addr + XEL_TSR_OFFSET, 0);
-	out_be32(lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET, 0);
+	__raw_writel(0, lp->base_addr + XEL_TSR_OFFSET);
+	__raw_writel(0, lp->base_addr + XEL_BUFFER_OFFSET + XEL_TSR_OFFSET);

 	/* Set the MAC address in the EmacLite device */
 	xemaclite_update_address(lp, ndev->dev_addr);