Patchwork powerpc/85xx: Add support for the "socrates" board (MPC8544)

login
register
mail settings
Submitter Wolfgang Grandegger
Date March 19, 2009, 3:26 p.m.
Message ID <49C26434.30302@grandegger.com>
Download mbox | patch
Permalink /patch/24692/
State Superseded, archived
Delegated to: Kumar Gala
Headers show

Comments

Wolfgang Grandegger - March 19, 2009, 3:26 p.m.
This patch adds support for the "socrates" board based on the MPC8544.
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.

The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.

For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:

    can@3,100 {
            compatible = "philips,sja1000";
            reg = <3 0x100 0x80>;
            interrupts = <2 2>;
            interrupts = <2 8 1>;   // number, type, routing
            interrupt-parent = <&fpga_pic>;
    };

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
---
 arch/powerpc/boot/Makefile                      |    1 
 arch/powerpc/boot/dts/socrates.dts              |  337 +++++
 arch/powerpc/boot/wrapper                       |    2 
 arch/powerpc/configs/85xx/socrates_defconfig    | 1410 ++++++++++++++++++++++++
 arch/powerpc/platforms/85xx/Kconfig             |    6 
 arch/powerpc/platforms/85xx/Makefile            |    2 
 arch/powerpc/platforms/85xx/socrates.c          |  156 ++
 arch/powerpc/platforms/85xx/socrates_fpga_pic.c |  320 +++++
 arch/powerpc/platforms/85xx/socrates_fpga_pic.h |   16 
 9 files changed, 2249 insertions(+), 1 deletion(-)
 create mode 100644 arch/powerpc/boot/dts/socrates.dts
 create mode 100644 arch/powerpc/configs/85xx/socrates_defconfig
 create mode 100644 arch/powerpc/platforms/85xx/socrates.c
 create mode 100644 arch/powerpc/platforms/85xx/socrates_fpga_pic.c
 create mode 100644 arch/powerpc/platforms/85xx/socrates_fpga_pic.h
 create mode 100644 drivers/mtd/nand/socrates_nand.c
David Gibson - March 20, 2009, 4:10 a.m.
On Thu, Mar 19, 2009 at 04:26:44PM +0100, Wolfgang Grandegger wrote:
> This patch adds support for the "socrates" board based on the MPC8544.
> Supported are Ethernet, serial console, I2C, I2C-based RTC and
> temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
> display controller.
> 
> The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
> supported through our own fpga_pic interrupt controller driver.
> 
> For example the SJA1000 controller is level low sensitive connected to
> fpga_pic line 2 and is routed to the second (of three) irq lines to
> the CPU:

A few minor device tree nits.

> +	soc8544@e0000000 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		device_type = "soc";
> +
> +		ranges = <0x00000000 0xe0000000 0x00100000>;
> +		reg = <0xe0000000 0x00001000>;	// CCSRBAR 1M
> +		bus-frequency = <0>;		// Filled in by U-Boot
> +		compatible = "fsl,socrates-immr", "simple-bus";

This should probably refer to 8544 instead of socrates.  Unless you
really do have a board-specific version of the SoC...

[snip]
> +		mdio@24520 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,gianfar-mdio";
> +			reg = <0x24520 0x20>;
> +
> +			phy0: ethernet-phy@0 {
> +				interrupt-parent = <&mpic>;
> +				interrupts = <0 1>;
> +				reg = <0>;
> +				device_type = "ethernet-phy";

No device_type here.

> +			};
> +			phy1: ethernet-phy@1 {
> +				interrupt-parent = <&mpic>;
> +				interrupts = <0 1>;
> +				reg = <1>;
> +				device_type = "ethernet-phy";
> +			};
> +			tbi0: tbi-phy@11 {
> +				reg = <0x11>;
> +				device_type = "tbi-phy";

Or here.

[snip]
> +	localbus {
> +		compatible = "fsl,socrates-localbus",
> +		             "fsl,mpc85xx-localbus",
> +		             "fsl,pq3-localbus";

Is this bus controller part of the SoC?  If so, the first compatible
string probably shouldn't be there (as for the soc/immr node itself).

[snip[
> +		display@2,0 {
> +			compatible = "fujitsu,lime";

This compat string looks slightly worryingly non-specific.
Kumar Gala - March 20, 2009, 4:26 a.m.
On Mar 19, 2009, at 10:26 AM, Wolfgang Grandegger wrote:

> +		mdio@24520 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,gianfar-mdio";
> +			reg = <0x24520 0x20>;
> +
> +			phy0: ethernet-phy@0 {
> +				interrupt-parent = <&mpic>;
> +				interrupts = <0 1>;
> +				reg = <0>;
> +				device_type = "ethernet-phy";
> +			};
> +			phy1: ethernet-phy@1 {
> +				interrupt-parent = <&mpic>;
> +				interrupts = <0 1>;
> +				reg = <1>;
> +				device_type = "ethernet-phy";
> +			};
> +			tbi0: tbi-phy@11 {
> +				reg = <0x11>;
> +				device_type = "tbi-phy";
> +			};
> +		};
> +
> +		mdio@26520 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "fsl,gianfar-tbi";
> +			reg = <0x26520 0x20>;
> +
> +			tbi1: tbi-phy@11 {
> +				reg = <0x11>;
> +				device_type = "tbi-phy";
> +			};
> +		};
> +
> +		enet0: ethernet@24000 {
> +			cell-index = <0>;
> +			device_type = "network";
> +			model = "eTSEC";
> +			compatible = "gianfar";
> +			reg = <0x24000 0x1000>;
> +			local-mac-address = [ 00 00 00 00 00 00 ];
> +			interrupts = <29 2 30 2 34 2>;
> +			interrupt-parent = <&mpic>;
> +			phy-handle = <&phy0>;
> +			tbi-handle = <&tbi0>;
> +			phy-connection-type = "rgmii-id";
> +		};
> +

See Anton's recent post in moving the mdio node under the ethernet.   
Please match.

- k
Grant Likely - March 20, 2009, 5:05 a.m.
I agree 100% with David's comments, and I have some additional ones below.

On Thu, Mar 19, 2009 at 9:26 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
> +       soc8544@e0000000 {
> +               #address-cells = <1>;
> +               #size-cells = <1>;
> +               device_type = "soc";

Drop device_type here too.

> +
> +               ranges = <0x00000000 0xe0000000 0x00100000>;
> +               reg = <0xe0000000 0x00001000>;  // CCSRBAR 1M
> +               bus-frequency = <0>;            // Filled in by U-Boot
> +               compatible = "fsl,socrates-immr", "simple-bus";

As David said, fix this to be SoC specific, not board specific.

> +       localbus {
> +               compatible = "fsl,socrates-localbus",
> +                            "fsl,mpc85xx-localbus",
> +                            "fsl,pq3-localbus";

1st entry shouldn't be there.
2nd entry should specify exact chip
3rd entry I don't like much, but others may debate me on it
Also, add "simple-bus" to this list.  (important for a later comment)

> +               #address-cells = <2>;
> +               #size-cells = <1>;
> +               reg = <0xe0005000 0x40>;
> +
> +               ranges = <0 0 0xfc000000 0x04000000
> +                         2 0 0xc8000000 0x04000000
> +                         3 0 0xc0000000 0x00100000
> +                       >; /* Overwritten by U-Boot */

Just curious, why is U-Boot overwriting the ranges property?

> +               fpga_pic: fpga-pic@3,10 {
> +                       compatible = "abb,socrates-fpga-pic";

Is 'abb' the companies' stock ticker symbol?  If not, then use the
real name and not an abbreviation.

> Index: linux-2.6/arch/powerpc/boot/wrapper
> ===================================================================
> --- linux-2.6.orig/arch/powerpc/boot/wrapper
> +++ linux-2.6/arch/powerpc/boot/wrapper
> @@ -183,7 +183,7 @@ cuboot*)
>     *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
>         platformo=$object/cuboot-85xx-cpm2.o
>         ;;
> -    *-mpc85*|*-tqm85*|*-sbc85*)
> +    *-mpc85*|*-tqm85*|*-sbc85*|*-socrates)
>         platformo=$object/cuboot-85xx.o
>         ;;

Is this a new or old platform?  Can U-Boot on the board boot with a
uImage + dtb instead of a cuImage?  I'd prefer to avoid adding new
cuImages to the wrapper script if at all possible.

> Index: linux-2.6/arch/powerpc/configs/85xx/socrates_defconfig
> ===================================================================
> --- /dev/null
> +++ linux-2.6/arch/powerpc/configs/85xx/socrates_defconfig

Is a socrates-specific defconfig really warranted?

> --- linux-2.6.orig/arch/powerpc/platforms/85xx/Makefile
> +++ linux-2.6/arch/powerpc/platforms/85xx/Makefile
> @@ -13,4 +13,6 @@ obj-$(CONFIG_STX_GP3)   += stx_gp3.o
>  obj-$(CONFIG_TQM85xx)    += tqm85xx.o
>  obj-$(CONFIG_SBC8560)     += sbc8560.o
>  obj-$(CONFIG_SBC8548)     += sbc8548.o
> +obj-$(CONFIG_SOCRATES)    += socrates.o
> +obj-$(CONFIG_SOCRATES)    += socrates_fpga_pic.o

The pic stuff isn't all that big.  Personally I'd roll it all into the
socrates.c file.

> --- /dev/null
> +++ linux-2.6/arch/powerpc/platforms/85xx/socrates.c
> +static void __init socrates_pic_init(void)
> +{
> +       struct mpic *mpic;
> +       struct resource r;
> +       struct device_node *np;
> +
> +       np = of_find_node_by_type(NULL, "open-pic");
> +       if (!np) {
> +               printk(KERN_ERR "Could not find open-pic node\n");
> +               return;
> +       }
> +
> +       if (of_address_to_resource(np, 0, &r)) {
> +               printk(KERN_ERR "Could not map mpic register space\n");
> +               of_node_put(np);
> +               return;
> +       }
> +
> +       mpic = mpic_alloc(np, r.start,
> +                       MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
> +                       0, 256, " OpenPIC  ");
> +       BUG_ON(mpic == NULL);
> +       of_node_put(np);
> +
> +       mpic_init(mpic);

Heh, this is a block of code cloned between all the 85xx boards it
seems.  Smells like a small refactoring candidate.  This isn't really
a critique of this patch, but I noticed it so I thought I'd mention
it.

> +static void socrates_show_cpuinfo(struct seq_file *m)
> +{
> +       uint pvid, svid, phid1;
> +       uint memsize = total_memory;
> +
> +       pvid = mfspr(SPRN_PVR);
> +       svid = mfspr(SPRN_SVR);
> +
> +       seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
> +       seq_printf(m, "SVR\t\t: 0x%x\n", svid);
> +
> +       /* Display cpu Pll setting */
> +       phid1 = mfspr(SPRN_HID1);
> +       seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
> +
> +       /* Display the amount of memory */
> +       seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
> +}

Another block of duplicated code.  In fact, many platforms have
dropped the cpuinfo hook entirely and just use the default output.

> +
> +static struct of_device_id __initdata of_bus_ids[] = {
> +       { .name = "soc", },
> +       { .type = "soc", },
> +       { .name = "localbus", },

Drop these three lines.  It is considered bad form now to bind on
either name or type for flattened device trees.  Instead add one {
.compatible = "simple-bus", }, entry and make sure the immr and
localbus nodes include "simple-bus" in the compatible string.

> +       {},
> +};
> +
> +static int __init declare_of_platform_devices(void)
> +{
> +       of_platform_bus_probe(NULL, of_bus_ids, NULL);
> +
> +       return 0;
> +}
> +machine_device_initcall(socrates, declare_of_platform_devices);

Don't add an initcall for this.  Instead assign
declar_of_platform_devices to the .init member of in the
define_machine() block below.

> Index: linux-2.6/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
> ===================================================================
> --- /dev/null
> +++ linux-2.6/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
> @@ -0,0 +1,320 @@
> +/*
> + *  Copyright (C) 2008 Ilya Yanok, Emcraft Systems
> + *
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/io.h>
> +
> +#define SOCRATES_FPGA_NUM_IRQS 9
> +
> +#define FPGA_PIC_IRQCFG                (0x0)
> +#define FPGA_PIC_IRQMASK(n)    (0x4 + 0x4 * (n))
> +
> +#define SOCRATES_FPGA_IRQ_MASK ((1 << SOCRATES_FPGA_NUM_IRQS) - 1)
> +
> +struct socrates_fpga_irq_info {
> +       unsigned int irq_line;
> +       int type;
> +};
> +
> +/*
> + * Interrupt routing and type table
> + *
> + * IRQ_TYPE_NONE means the interrupt type is configurable,
> + * otherwise it's fixed to the specified value.
> + */
> +static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
> +       [0] = {0, IRQ_TYPE_NONE},
> +       [1] = {0, IRQ_TYPE_LEVEL_HIGH},
> +       [2] = {0, IRQ_TYPE_LEVEL_LOW},
> +       [3] = {0, IRQ_TYPE_NONE},
> +       [4] = {0, IRQ_TYPE_NONE},
> +       [5] = {0, IRQ_TYPE_NONE},
> +       [6] = {0, IRQ_TYPE_NONE},
> +       [7] = {0, IRQ_TYPE_NONE},
> +       [8] = {0, IRQ_TYPE_LEVEL_HIGH},
> +};
> +
> +#define socrates_fpga_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
> +
> +static DEFINE_SPINLOCK(socrates_fpga_pic_lock);
> +
> +static void __iomem *socrates_fpga_pic_iobase;
> +static struct irq_host *socrates_fpga_pic_irq_host;
> +static unsigned int socrates_fpga_irqs[3];
> +
> +static inline uint32_t socrates_fpga_pic_read(int reg)
> +{
> +       return in_be32(socrates_fpga_pic_iobase + reg);
> +}
> +
> +static inline void socrates_fpga_pic_write(int reg, uint32_t val)
> +{
> +       out_be32(socrates_fpga_pic_iobase + reg, val);
> +}
> +
> +static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq)
> +{
> +       uint32_t cause;
> +       unsigned long flags;
> +       int i;
> +
> +       for (i = 0; i < 3; i++) {
> +               if (irq == socrates_fpga_irqs[i])
> +                       break;
> +       }
> +       if (i == 3)
> +               return NO_IRQ;

This is interesting.  What does it mean?  It would be helpful to have
a theory of operation blurb in this file for stuff like this..

> +static int socrates_fpga_pic_host_xlate(struct irq_host *h,
> +               struct device_node *ct, u32 *intspec, unsigned int intsize,
> +               irq_hw_number_t *out_hwirq, unsigned int *out_flags)
> +{
> +       struct socrates_fpga_irq_info *fpga_irq = &fpga_irqs[intspec[0]];
> +
> +       *out_hwirq = intspec[0];
> +       if  (fpga_irq->type == IRQ_TYPE_NONE) {
> +               /* type is configurable */
> +               if (intspec[1] != IRQ_TYPE_LEVEL_LOW &&
> +                   intspec[1] != IRQ_TYPE_LEVEL_HIGH) {
> +                       printk(KERN_WARNING "FPGA PIC: invalid irq type, "
> +                              "setting default active low\n");

Nit: pr_warn() perhaps?  And same through the rest of the file.

Cheers,
g.
Wolfgang Grandegger - March 20, 2009, 11:57 a.m.
Grant Likely wrote:
> I agree 100% with David's comments, and I have some additional ones below.

OK.

> On Thu, Mar 19, 2009 at 9:26 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>> +       soc8544@e0000000 {
>> +               #address-cells = <1>;
>> +               #size-cells = <1>;
>> +               device_type = "soc";
> 
> Drop device_type here too.
> 
>> +
>> +               ranges = <0x00000000 0xe0000000 0x00100000>;
>> +               reg = <0xe0000000 0x00001000>;  // CCSRBAR 1M
>> +               bus-frequency = <0>;            // Filled in by U-Boot
>> +               compatible = "fsl,socrates-immr", "simple-bus";
> 
> As David said, fix this to be SoC specific, not board specific.
> 
>> +       localbus {
>> +               compatible = "fsl,socrates-localbus",
>> +                            "fsl,mpc85xx-localbus",
>> +                            "fsl,pq3-localbus";
> 
> 1st entry shouldn't be there.
> 2nd entry should specify exact chip
> 3rd entry I don't like much, but others may debate me on it
> Also, add "simple-bus" to this list.  (important for a later comment)

OK.

> 
>> +               #address-cells = <2>;
>> +               #size-cells = <1>;
>> +               reg = <0xe0005000 0x40>;
>> +
>> +               ranges = <0 0 0xfc000000 0x04000000
>> +                         2 0 0xc8000000 0x04000000
>> +                         3 0 0xc0000000 0x00100000
>> +                       >; /* Overwritten by U-Boot */
> 
> Just curious, why is U-Boot overwriting the ranges property?

Because there are boards without FPGA or graphic controller on the local
bus.

>> +               fpga_pic: fpga-pic@3,10 {
>> +                       compatible = "abb,socrates-fpga-pic";
> 
> Is 'abb' the companies' stock ticker symbol?  If not, then use the
> real name and not an abbreviation.

Yes.

>> Index: linux-2.6/arch/powerpc/boot/wrapper
>> ===================================================================
>> --- linux-2.6.orig/arch/powerpc/boot/wrapper
>> +++ linux-2.6/arch/powerpc/boot/wrapper
>> @@ -183,7 +183,7 @@ cuboot*)
>>     *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
>>         platformo=$object/cuboot-85xx-cpm2.o
>>         ;;
>> -    *-mpc85*|*-tqm85*|*-sbc85*)
>> +    *-mpc85*|*-tqm85*|*-sbc85*|*-socrates)
>>         platformo=$object/cuboot-85xx.o
>>         ;;
> 
> Is this a new or old platform?  Can U-Boot on the board boot with a
> uImage + dtb instead of a cuImage?  I'd prefer to avoid adding new
> cuImages to the wrapper script if at all possible.

It's a new platform. Therefore I will drop cuboot support.

>> Index: linux-2.6/arch/powerpc/configs/85xx/socrates_defconfig
>> ===================================================================
>> --- /dev/null
>> +++ linux-2.6/arch/powerpc/configs/85xx/socrates_defconfig
> 
> Is a socrates-specific defconfig really warranted?
> 
>> --- linux-2.6.orig/arch/powerpc/platforms/85xx/Makefile
>> +++ linux-2.6/arch/powerpc/platforms/85xx/Makefile
>> @@ -13,4 +13,6 @@ obj-$(CONFIG_STX_GP3)   += stx_gp3.o
>>  obj-$(CONFIG_TQM85xx)    += tqm85xx.o
>>  obj-$(CONFIG_SBC8560)     += sbc8560.o
>>  obj-$(CONFIG_SBC8548)     += sbc8548.o
>> +obj-$(CONFIG_SOCRATES)    += socrates.o
>> +obj-$(CONFIG_SOCRATES)    += socrates_fpga_pic.o
> 
> The pic stuff isn't all that big.  Personally I'd roll it all into the
> socrates.c file.

Well,

  $ wc -l socrates_fpga_pic.c
  156 socrates.c
  320 socrates_fpga_pic.c

Personally, I'd prefer to separate the pic from the board init code,
especially with that size.

>> --- /dev/null
>> +++ linux-2.6/arch/powerpc/platforms/85xx/socrates.c
>> +static void __init socrates_pic_init(void)
>> +{
>> +       struct mpic *mpic;
>> +       struct resource r;
>> +       struct device_node *np;
>> +
>> +       np = of_find_node_by_type(NULL, "open-pic");
>> +       if (!np) {
>> +               printk(KERN_ERR "Could not find open-pic node\n");
>> +               return;
>> +       }
>> +
>> +       if (of_address_to_resource(np, 0, &r)) {
>> +               printk(KERN_ERR "Could not map mpic register space\n");
>> +               of_node_put(np);
>> +               return;
>> +       }
>> +
>> +       mpic = mpic_alloc(np, r.start,
>> +                       MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
>> +                       0, 256, " OpenPIC  ");
>> +       BUG_ON(mpic == NULL);
>> +       of_node_put(np);
>> +
>> +       mpic_init(mpic);
> 
> Heh, this is a block of code cloned between all the 85xx boards it
> seems.  Smells like a small refactoring candidate.  This isn't really
> a critique of this patch, but I noticed it so I thought I'd mention
> it.
> 
>> +static void socrates_show_cpuinfo(struct seq_file *m)
>> +{
>> +       uint pvid, svid, phid1;
>> +       uint memsize = total_memory;
>> +
>> +       pvid = mfspr(SPRN_PVR);
>> +       svid = mfspr(SPRN_SVR);
>> +
>> +       seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
>> +       seq_printf(m, "SVR\t\t: 0x%x\n", svid);
>> +
>> +       /* Display cpu Pll setting */
>> +       phid1 = mfspr(SPRN_HID1);
>> +       seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
>> +
>> +       /* Display the amount of memory */
>> +       seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
>> +}
> 
> Another block of duplicated code.  In fact, many platforms have
> dropped the cpuinfo hook entirely and just use the default output.

I can drop it for this board as well, no problem.

>> +
>> +static struct of_device_id __initdata of_bus_ids[] = {
>> +       { .name = "soc", },
>> +       { .type = "soc", },
>> +       { .name = "localbus", },
> 
> Drop these three lines.  It is considered bad form now to bind on
> either name or type for flattened device trees.  Instead add one {
> .compatible = "simple-bus", }, entry and make sure the immr and
> localbus nodes include "simple-bus" in the compatible string.
> 
>> +       {},
>> +};
>> +
>> +static int __init declare_of_platform_devices(void)
>> +{
>> +       of_platform_bus_probe(NULL, of_bus_ids, NULL);
>> +
>> +       return 0;
>> +}
>> +machine_device_initcall(socrates, declare_of_platform_devices);
> 
> Don't add an initcall for this.  Instead assign
> declar_of_platform_devices to the .init member of in the
> define_machine() block below.

OK.

>> Index: linux-2.6/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
>> ===================================================================
>> --- /dev/null
>> +++ linux-2.6/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
>> @@ -0,0 +1,320 @@
>> +/*
>> + *  Copyright (C) 2008 Ilya Yanok, Emcraft Systems
>> + *
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + */
>> +
>> +#include <linux/irq.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/io.h>
>> +
>> +#define SOCRATES_FPGA_NUM_IRQS 9
>> +
>> +#define FPGA_PIC_IRQCFG                (0x0)
>> +#define FPGA_PIC_IRQMASK(n)    (0x4 + 0x4 * (n))
>> +
>> +#define SOCRATES_FPGA_IRQ_MASK ((1 << SOCRATES_FPGA_NUM_IRQS) - 1)
>> +
>> +struct socrates_fpga_irq_info {
>> +       unsigned int irq_line;
>> +       int type;
>> +};
>> +
>> +/*
>> + * Interrupt routing and type table
>> + *
>> + * IRQ_TYPE_NONE means the interrupt type is configurable,
>> + * otherwise it's fixed to the specified value.
>> + */
>> +static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
>> +       [0] = {0, IRQ_TYPE_NONE},
>> +       [1] = {0, IRQ_TYPE_LEVEL_HIGH},
>> +       [2] = {0, IRQ_TYPE_LEVEL_LOW},
>> +       [3] = {0, IRQ_TYPE_NONE},
>> +       [4] = {0, IRQ_TYPE_NONE},
>> +       [5] = {0, IRQ_TYPE_NONE},
>> +       [6] = {0, IRQ_TYPE_NONE},
>> +       [7] = {0, IRQ_TYPE_NONE},
>> +       [8] = {0, IRQ_TYPE_LEVEL_HIGH},
>> +};
>> +
>> +#define socrates_fpga_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
>> +
>> +static DEFINE_SPINLOCK(socrates_fpga_pic_lock);
>> +
>> +static void __iomem *socrates_fpga_pic_iobase;
>> +static struct irq_host *socrates_fpga_pic_irq_host;
>> +static unsigned int socrates_fpga_irqs[3];
>> +
>> +static inline uint32_t socrates_fpga_pic_read(int reg)
>> +{
>> +       return in_be32(socrates_fpga_pic_iobase + reg);
>> +}
>> +
>> +static inline void socrates_fpga_pic_write(int reg, uint32_t val)
>> +{
>> +       out_be32(socrates_fpga_pic_iobase + reg, val);
>> +}
>> +
>> +static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq)
>> +{
>> +       uint32_t cause;
>> +       unsigned long flags;
>> +       int i;
>> +
>> +       for (i = 0; i < 3; i++) {
>> +               if (irq == socrates_fpga_irqs[i])
>> +                       break;
>> +       }
>> +       if (i == 3)
>> +               return NO_IRQ;
> 
> This is interesting.  What does it mean?  It would be helpful to have
> a theory of operation blurb in this file for stuff like this..

Just three interrupt lines are routed to the MPIC. A BUG_ON would be
more appropriate, though.

>> +static int socrates_fpga_pic_host_xlate(struct irq_host *h,
>> +               struct device_node *ct, u32 *intspec, unsigned int intsize,
>> +               irq_hw_number_t *out_hwirq, unsigned int *out_flags)
>> +{
>> +       struct socrates_fpga_irq_info *fpga_irq = &fpga_irqs[intspec[0]];
>> +
>> +       *out_hwirq = intspec[0];
>> +       if  (fpga_irq->type == IRQ_TYPE_NONE) {
>> +               /* type is configurable */
>> +               if (intspec[1] != IRQ_TYPE_LEVEL_LOW &&
>> +                   intspec[1] != IRQ_TYPE_LEVEL_HIGH) {
>> +                       printk(KERN_WARNING "FPGA PIC: invalid irq type, "
>> +                              "setting default active low\n");
> 
> Nit: pr_warn() perhaps?  And same through the rest of the file.

Yep, will fix the not commented issues as well.

Wolfgang.
Wolfgang Grandegger - March 20, 2009, 8:12 p.m.
David Gibson wrote:
> On Thu, Mar 19, 2009 at 04:26:44PM +0100, Wolfgang Grandegger wrote:
[snip]
> [snip[
>> +		display@2,0 {
>> +			compatible = "fujitsu,lime";
> 
> This compat string looks slightly worryingly non-specific.

The node is for the Lime graphic controller from Fujitsu. What does
worry you?

Wolfgang.
Wolfgang Grandegger - March 20, 2009, 8:16 p.m.
Hi Kumar,

Kumar Gala wrote:
> 
> On Mar 19, 2009, at 10:26 AM, Wolfgang Grandegger wrote:
> 
>> +        mdio@24520 {
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            compatible = "fsl,gianfar-mdio";
>> +            reg = <0x24520 0x20>;
>> +
>> +            phy0: ethernet-phy@0 {
>> +                interrupt-parent = <&mpic>;
>> +                interrupts = <0 1>;
>> +                reg = <0>;
>> +                device_type = "ethernet-phy";
>> +            };
>> +            phy1: ethernet-phy@1 {
>> +                interrupt-parent = <&mpic>;
>> +                interrupts = <0 1>;
>> +                reg = <1>;
>> +                device_type = "ethernet-phy";
>> +            };
>> +            tbi0: tbi-phy@11 {
>> +                reg = <0x11>;
>> +                device_type = "tbi-phy";
>> +            };
>> +        };
>> +
>> +        mdio@26520 {
>> +            #address-cells = <1>;
>> +            #size-cells = <0>;
>> +            compatible = "fsl,gianfar-tbi";
>> +            reg = <0x26520 0x20>;
>> +
>> +            tbi1: tbi-phy@11 {
>> +                reg = <0x11>;
>> +                device_type = "tbi-phy";
>> +            };
>> +        };
>> +
>> +        enet0: ethernet@24000 {
>> +            cell-index = <0>;
>> +            device_type = "network";
>> +            model = "eTSEC";
>> +            compatible = "gianfar";
>> +            reg = <0x24000 0x1000>;
>> +            local-mac-address = [ 00 00 00 00 00 00 ];
>> +            interrupts = <29 2 30 2 34 2>;
>> +            interrupt-parent = <&mpic>;
>> +            phy-handle = <&phy0>;
>> +            tbi-handle = <&tbi0>;
>> +            phy-connection-type = "rgmii-id";
>> +        };
>> +
> 
> See Anton's recent post in moving the mdio node under the ethernet. 
> Please match.

I have fixed it for the socrates board. Is there a GIT tree with that
modifications which I can base my patches on, also for the one for the
TQM8548 posted recently:

  http://ozlabs.org/pipermail/linuxppc-dev/2009-March/069364.html

Wolfgang.
Wolfgang Grandegger - March 20, 2009, 10:02 p.m.
David Gibson wrote:
> On Thu, Mar 19, 2009 at 04:26:44PM +0100, Wolfgang Grandegger wrote:
>> This patch adds support for the "socrates" board based on the MPC8544.
>> Supported are Ethernet, serial console, I2C, I2C-based RTC and
>> temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
>> display controller.
>>
>> The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
>> supported through our own fpga_pic interrupt controller driver.
>>
>> For example the SJA1000 controller is level low sensitive connected to
>> fpga_pic line 2 and is routed to the second (of three) irq lines to
>> the CPU:
> 
> A few minor device tree nits.
> 
>> +	soc8544@e0000000 {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		device_type = "soc";
>> +
>> +		ranges = <0x00000000 0xe0000000 0x00100000>;
>> +		reg = <0xe0000000 0x00001000>;	// CCSRBAR 1M
>> +		bus-frequency = <0>;		// Filled in by U-Boot
>> +		compatible = "fsl,socrates-immr", "simple-bus";
> 
> This should probably refer to 8544 instead of socrates.  Unless you
> really do have a board-specific version of the SoC...

OK, that should then be:

   +		compatible = "fsl,mpc8544-immr", "simple-bus";

It should always be with the prefix "mpc", I guess. But some of the
following compatible names are without that prefix:

$ grep -h '\-l2-cache-controller' *
			compatible = "fsl,8540-l2-cache-controller";
			compatible = "fsl,mpc8536-l2-cache-controller";
			compatible = "fsl,8540-l2-cache-controller";
			compatible = "fsl,8541-l2-cache-controller";
			compatible = "fsl,8544-l2-cache-controller";
			compatible = "fsl,8548-l2-cache-controller";
			compatible = "fsl,8555-l2-cache-controller";
			compatible = "fsl,8540-l2-cache-controller";
			compatible = "fsl,8568-l2-cache-controller";
			compatible = "fsl,mpc8572-l2-cache-controller";
			compatible = "fsl,mpc8572-l2-cache-controller";
			compatible = "fsl,mpc8572-l2-cache-controller";
			compatible = "fsl,8548-l2-cache-controller";
			compatible = "fsl,8560-l2-cache-controller";
			compatible = "fsl,mpc8544-l2-cache-controller";
			compatible = "fsl,mpc8544-l2-cache-controller";
			compatible = "fsl,8540-l2-cache-controller";
			compatible = "fsl,8540-l2-cache-controller";
			compatible = "fsl,8540-l2-cache-controller";
			compatible = "fsl,mpc8548-l2-cache-controller";
			compatible = "fsl,mpc8548-l2-cache-controller";
			compatible = "fsl,8540-l2-cache-controller";
			compatible = "fsl,8540-l2-cache-controller";

That's confusing.

Wolfgang.
Wolfgang Grandegger - March 31, 2009, 9:35 a.m.
Grant Likely wrote:
> I agree 100% with David's comments, and I have some additional ones below.
> 
> On Thu, Mar 19, 2009 at 9:26 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>> +       soc8544@e0000000 {
>> +               #address-cells = <1>;
>> +               #size-cells = <1>;
>> +               device_type = "soc";
> 
> Drop device_type here too.

Grrr, I just realized that removing the devices type "soc" has broken
fsl_get_sys_freq(). See:

http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80

We need a quick fix and we could take the occasion to establish a common
function for the MPC52xx as well, but it's not obvious to me how to find
the SOC node without the device type property.

Wolfgang.
Grant Likely - March 31, 2009, 1:23 p.m.
On Tue, Mar 31, 2009 at 3:35 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
> Grant Likely wrote:
>> I agree 100% with David's comments, and I have some additional ones below.
>>
>> On Thu, Mar 19, 2009 at 9:26 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>>> +       soc8544@e0000000 {
>>> +               #address-cells = <1>;
>>> +               #size-cells = <1>;
>>> +               device_type = "soc";
>>
>> Drop device_type here too.
>
> Grrr, I just realized that removing the devices type "soc" has broken
> fsl_get_sys_freq(). See:
>
> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
>
> We need a quick fix and we could take the occasion to establish a common
> function for the MPC52xx as well, but it's not obvious to me how to find
> the SOC node without the device type property.

SoC node should have a compatible property, just like everything else.

compatible = "fsl,mpc8544-immr";  (immr == Internally Memory Mapped Registers)

Many other boards already do this.

g.
Wolfgang Grandegger - March 31, 2009, 1:36 p.m.
Grant Likely wrote:
> On Tue, Mar 31, 2009 at 3:35 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>> Grant Likely wrote:
>>> I agree 100% with David's comments, and I have some additional ones below.
>>>
>>> On Thu, Mar 19, 2009 at 9:26 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>>>> +       soc8544@e0000000 {
>>>> +               #address-cells = <1>;
>>>> +               #size-cells = <1>;
>>>> +               device_type = "soc";
>>> Drop device_type here too.
>> Grrr, I just realized that removing the devices type "soc" has broken
>> fsl_get_sys_freq(). See:
>>
>> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
>>
>> We need a quick fix and we could take the occasion to establish a common
>> function for the MPC52xx as well, but it's not obvious to me how to find
>> the SOC node without the device type property.
> 
> SoC node should have a compatible property, just like everything else.
> 
> compatible = "fsl,mpc8544-immr";  (immr == Internally Memory Mapped Registers)
> 
> Many other boards already do this.

Yes, it does, but searching for the SOC node is not straight-forward
because there is no common compatibility string but many CPU-specific
compatibility strings, e.g. "fsl,mpc8560-immr", etc. Have I missed
something?

Unfortunately, other 85xx functions search for the device type "soc" as
well. Therefore I think we must keep the devices type "soc" for the time
being. Kumar?

Wolfgang.
Grant Likely - March 31, 2009, 3:05 p.m.
On Tue, Mar 31, 2009 at 7:36 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
> Grant Likely wrote:
>> On Tue, Mar 31, 2009 at 3:35 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>>> Grant Likely wrote:
>>>> I agree 100% with David's comments, and I have some additional ones below.
>>>>
>>>> On Thu, Mar 19, 2009 at 9:26 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>>>>> +       soc8544@e0000000 {
>>>>> +               #address-cells = <1>;
>>>>> +               #size-cells = <1>;
>>>>> +               device_type = "soc";
>>>> Drop device_type here too.
>>> Grrr, I just realized that removing the devices type "soc" has broken
>>> fsl_get_sys_freq(). See:
>>>
>>> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
>>>
>>> We need a quick fix and we could take the occasion to establish a common
>>> function for the MPC52xx as well, but it's not obvious to me how to find
>>> the SOC node without the device type property.
>>
>> SoC node should have a compatible property, just like everything else.
>>
>> compatible = "fsl,mpc8544-immr";  (immr == Internally Memory Mapped Registers)
>>
>> Many other boards already do this.
>
> Yes, it does, but searching for the SOC node is not straight-forward
> because there is no common compatibility string but many CPU-specific
> compatibility strings, e.g. "fsl,mpc8560-immr", etc. Have I missed
> something?

Choose a new value ("fsl,mpc-immr" perhaps?), document exactly what it
means, and add add it to the end of the compatible list.

> Unfortunately, other 85xx functions search for the device type "soc" as
> well. Therefore I think we must keep the devices type "soc" for the time
> being. Kumar?

Fix them!  :-)

Most troublesome places are where of_find_node_by_type() is used (I
see two cases in fsl_soc.c).  I added the of_find_matching_node()
function specifically to rework code that was only matching on a
single compatible or type value.  See usage of mpc52xx_bus_ids in
arch/powerpc/platforms/52xx/mpc52xx_common.c for an example.

It is a pain, but I think it is important to be reducing device_type
usage as we hit against them.

g.
Anton Vorontsov - March 31, 2009, 3:54 p.m.
On Tue, Mar 31, 2009 at 09:05:28AM -0600, Grant Likely wrote:
[...]
> >>>>> +       soc8544@e0000000 {
> >>>>> +               #address-cells = <1>;
> >>>>> +               #size-cells = <1>;
> >>>>> +               device_type = "soc";
> >>>> Drop device_type here too.
> >>> Grrr, I just realized that removing the devices type "soc" has broken
> >>> fsl_get_sys_freq(). See:
> >>>
> >>> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
> >>>
> >>> We need a quick fix and we could take the occasion to establish a common
> >>> function for the MPC52xx as well, but it's not obvious to me how to find
> >>> the SOC node without the device type property.
> >>
> >> SoC node should have a compatible property, just like everything else.
> >>
> >> compatible = "fsl,mpc8544-immr";  (immr == Internally Memory Mapped Registers)
> >>
> >> Many other boards already do this.
> >
> > Yes, it does, but searching for the SOC node is not straight-forward
> > because there is no common compatibility string but many CPU-specific
> > compatibility strings, e.g. "fsl,mpc8560-immr", etc. Have I missed
> > something?
> 
> Choose a new value ("fsl,mpc-immr" perhaps?), document exactly what it
> means, and add add it to the end of the compatible list.

As Scott Wood once pointed out, IMMR does not exists for MPC85xx
parts. There it's called CCSR.

See this thread:

http://www.mail-archive.com/linuxppc-dev@ozlabs.org/msg12665.html

I still think that
"fsl,mpc83NN-immr", "fsl,soc", "simple-bus" for 83xx
and
"fsl,mpc85NN-ccsr", "fsl,soc", "simple-bus" for 85xx

would be OK, at least to start with. We can always deprecate "fsl,soc"
compatible in favour of something more elegant, but "fsl,soc" should be
just fine to replace device_type = "soc".

Also, there is another good thing about "fsl,soc" -- U-Boot already
finds it for 83xx CPUs. ;-)
Grant Likely - March 31, 2009, 4:02 p.m.
On Tue, Mar 31, 2009 at 9:54 AM, Anton Vorontsov
<avorontsov@ru.mvista.com> wrote:
> On Tue, Mar 31, 2009 at 09:05:28AM -0600, Grant Likely wrote:
> [...]
>> >>>>> +       soc8544@e0000000 {
>> >>>>> +               #address-cells = <1>;
>> >>>>> +               #size-cells = <1>;
>> >>>>> +               device_type = "soc";
>> >>>> Drop device_type here too.
>> >>> Grrr, I just realized that removing the devices type "soc" has broken
>> >>> fsl_get_sys_freq(). See:
>> >>>
>> >>> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
>> >>>
>> >>> We need a quick fix and we could take the occasion to establish a common
>> >>> function for the MPC52xx as well, but it's not obvious to me how to find
>> >>> the SOC node without the device type property.
>> >>
>> >> SoC node should have a compatible property, just like everything else.
>> >>
>> >> compatible = "fsl,mpc8544-immr";  (immr == Internally Memory Mapped Registers)
>> >>
>> >> Many other boards already do this.
>> >
>> > Yes, it does, but searching for the SOC node is not straight-forward
>> > because there is no common compatibility string but many CPU-specific
>> > compatibility strings, e.g. "fsl,mpc8560-immr", etc. Have I missed
>> > something?
>>
>> Choose a new value ("fsl,mpc-immr" perhaps?), document exactly what it
>> means, and add add it to the end of the compatible list.
>
> As Scott Wood once pointed out, IMMR does not exists for MPC85xx
> parts. There it's called CCSR.
>
> See this thread:
>
> http://www.mail-archive.com/linuxppc-dev@ozlabs.org/msg12665.html
>
> I still think that
> "fsl,mpc83NN-immr", "fsl,soc", "simple-bus" for 83xx
> and
> "fsl,mpc85NN-ccsr", "fsl,soc", "simple-bus" for 85xx
>
> would be OK, at least to start with. We can always deprecate "fsl,soc"
> compatible in favour of something more elegant, but "fsl,soc" should be
> just fine to replace device_type = "soc".
>
> Also, there is another good thing about "fsl,soc" -- U-Boot already
> finds it for 83xx CPUs. ;-)

I'm totally fine with fsl,soc *providing* that it is documented as to
exactly what it describes, what properties are expected, and how they
are used.  Since fsl,soc is not tied to a specific piece of silicon I
want to guard against the definition of "fsl,soc" drifting over time.

g.
Wolfgang Grandegger - April 1, 2009, 7:36 a.m.
Anton Vorontsov wrote:
> On Tue, Mar 31, 2009 at 09:05:28AM -0600, Grant Likely wrote:
> [...]
>>>>>>> +       soc8544@e0000000 {
>>>>>>> +               #address-cells = <1>;
>>>>>>> +               #size-cells = <1>;
>>>>>>> +               device_type = "soc";
>>>>>> Drop device_type here too.
>>>>> Grrr, I just realized that removing the devices type "soc" has broken
>>>>> fsl_get_sys_freq(). See:
>>>>>
>>>>> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
>>>>>
>>>>> We need a quick fix and we could take the occasion to establish a common
>>>>> function for the MPC52xx as well, but it's not obvious to me how to find
>>>>> the SOC node without the device type property.
>>>> SoC node should have a compatible property, just like everything else.
>>>>
>>>> compatible = "fsl,mpc8544-immr";  (immr == Internally Memory Mapped Registers)
>>>>
>>>> Many other boards already do this.
>>> Yes, it does, but searching for the SOC node is not straight-forward
>>> because there is no common compatibility string but many CPU-specific
>>> compatibility strings, e.g. "fsl,mpc8560-immr", etc. Have I missed
>>> something?
>> Choose a new value ("fsl,mpc-immr" perhaps?), document exactly what it
>> means, and add add it to the end of the compatible list.
> 
> As Scott Wood once pointed out, IMMR does not exists for MPC85xx
> parts. There it's called CCSR.
> 
> See this thread:
> 
> http://www.mail-archive.com/linuxppc-dev@ozlabs.org/msg12665.html
> 
> I still think that
> "fsl,mpc83NN-immr", "fsl,soc", "simple-bus" for 83xx
> and
> "fsl,mpc85NN-ccsr", "fsl,soc", "simple-bus" for 85xx
> 
> would be OK, at least to start with. We can always deprecate "fsl,soc"
> compatible in favour of something more elegant, but "fsl,soc" should be
> just fine to replace device_type = "soc".
> 
> Also, there is another good thing about "fsl,soc" -- U-Boot already
> finds it for 83xx CPUs. ;-)

Ugh! I just realize the full impact of removing device type "soc". It
will break compatibility with U-Boot for many boards. Is it worth it?

Wolfgang.
Grant Likely - April 1, 2009, 12:40 p.m.
On Wed, Apr 1, 2009 at 1:36 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
> Anton Vorontsov wrote:
>> On Tue, Mar 31, 2009 at 09:05:28AM -0600, Grant Likely wrote:
>> [...]
>>>>>>>> +       soc8544@e0000000 {
>>>>>>>> +               #address-cells = <1>;
>>>>>>>> +               #size-cells = <1>;
>>>>>>>> +               device_type = "soc";
>>>>>>> Drop device_type here too.
>>>>>> Grrr, I just realized that removing the devices type "soc" has broken
>>>>>> fsl_get_sys_freq(). See:
>>>>>>
>>>>>> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
>>>>>>
>>>>>> We need a quick fix and we could take the occasion to establish a common
>>>>>> function for the MPC52xx as well, but it's not obvious to me how to find
>>>>>> the SOC node without the device type property.
>>>>> SoC node should have a compatible property, just like everything else.
>>>>>
>>>>> compatible = "fsl,mpc8544-immr";  (immr == Internally Memory Mapped Registers)
>>>>>
>>>>> Many other boards already do this.
>>>> Yes, it does, but searching for the SOC node is not straight-forward
>>>> because there is no common compatibility string but many CPU-specific
>>>> compatibility strings, e.g. "fsl,mpc8560-immr", etc. Have I missed
>>>> something?
>>> Choose a new value ("fsl,mpc-immr" perhaps?), document exactly what it
>>> means, and add add it to the end of the compatible list.
>>
>> As Scott Wood once pointed out, IMMR does not exists for MPC85xx
>> parts. There it's called CCSR.
>>
>> See this thread:
>>
>> http://www.mail-archive.com/linuxppc-dev@ozlabs.org/msg12665.html
>>
>> I still think that
>> "fsl,mpc83NN-immr", "fsl,soc", "simple-bus" for 83xx
>> and
>> "fsl,mpc85NN-ccsr", "fsl,soc", "simple-bus" for 85xx
>>
>> would be OK, at least to start with. We can always deprecate "fsl,soc"
>> compatible in favour of something more elegant, but "fsl,soc" should be
>> just fine to replace device_type = "soc".
>>
>> Also, there is another good thing about "fsl,soc" -- U-Boot already
>> finds it for 83xx CPUs. ;-)
>
> Ugh! I just realize the full impact of removing device type "soc". It
> will break compatibility with U-Boot for many boards. Is it worth it?

Yes, I know this.  I'm not asking you to fix all the other boards, but
make sure that it is not required for the new board.

g.
Wolfgang Grandegger - April 1, 2009, 1:10 p.m.
Grant Likely wrote:
> On Wed, Apr 1, 2009 at 1:36 AM, Wolfgang Grandegger <wg@grandegger.com> wrote:
>> Anton Vorontsov wrote:
>>> On Tue, Mar 31, 2009 at 09:05:28AM -0600, Grant Likely wrote:
>>> [...]
>>>>>>>>> +       soc8544@e0000000 {
>>>>>>>>> +               #address-cells = <1>;
>>>>>>>>> +               #size-cells = <1>;
>>>>>>>>> +               device_type = "soc";
>>>>>>>> Drop device_type here too.
>>>>>>> Grrr, I just realized that removing the devices type "soc" has broken
>>>>>>> fsl_get_sys_freq(). See:
>>>>>>>
>>>>>>> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
>>>>>>>
>>>>>>> We need a quick fix and we could take the occasion to establish a common
>>>>>>> function for the MPC52xx as well, but it's not obvious to me how to find
>>>>>>> the SOC node without the device type property.
>>>>>> SoC node should have a compatible property, just like everything else.
>>>>>>
>>>>>> compatible = "fsl,mpc8544-immr";  (immr == Internally Memory Mapped Registers)
>>>>>>
>>>>>> Many other boards already do this.
>>>>> Yes, it does, but searching for the SOC node is not straight-forward
>>>>> because there is no common compatibility string but many CPU-specific
>>>>> compatibility strings, e.g. "fsl,mpc8560-immr", etc. Have I missed
>>>>> something?
>>>> Choose a new value ("fsl,mpc-immr" perhaps?), document exactly what it
>>>> means, and add add it to the end of the compatible list.
>>> As Scott Wood once pointed out, IMMR does not exists for MPC85xx
>>> parts. There it's called CCSR.
>>>
>>> See this thread:
>>>
>>> http://www.mail-archive.com/linuxppc-dev@ozlabs.org/msg12665.html
>>>
>>> I still think that
>>> "fsl,mpc83NN-immr", "fsl,soc", "simple-bus" for 83xx
>>> and
>>> "fsl,mpc85NN-ccsr", "fsl,soc", "simple-bus" for 85xx
>>>
>>> would be OK, at least to start with. We can always deprecate "fsl,soc"
>>> compatible in favour of something more elegant, but "fsl,soc" should be
>>> just fine to replace device_type = "soc".
>>>
>>> Also, there is another good thing about "fsl,soc" -- U-Boot already
>>> finds it for 83xx CPUs. ;-)
>> Ugh! I just realize the full impact of removing device type "soc". It
>> will break compatibility with U-Boot for many boards. Is it worth it?
> 
> Yes, I know this.  I'm not asking you to fix all the other boards, but
> make sure that it is not required for the new board.

Hm, I'm confused, if we want to fix this issue we need first to

- fix all functions in fsl_soc.c searching for the compatible string
  "fsl,soc" instead of the device type "soc" (or both for backward
  compatibility).

- fix U-Boot to find the SOC node by looking for "fsl,soc" to insert the
  proper bus-frequency, at least.

That affects *all* boards using CONFIG_FSL_SOC and requires an
up-to-date version of U-Boot for new kernels :-(. If that is fixed, I
can remove the "device_type = "soc";" from socrates.dts (and may more),
but not right now. Or have I missed something?

Wolfgang.
Kumar Gala - April 1, 2009, 1:27 p.m.
On Apr 1, 2009, at 8:10 AM, Wolfgang Grandegger wrote:

> Grant Likely wrote:
>> On Wed, Apr 1, 2009 at 1:36 AM, Wolfgang Grandegger <wg@grandegger.com 
>> > wrote:
>>> Anton Vorontsov wrote:
>>>> On Tue, Mar 31, 2009 at 09:05:28AM -0600, Grant Likely wrote:
>>>> [...]
>>>>>>>>>> +       soc8544@e0000000 {
>>>>>>>>>> +               #address-cells = <1>;
>>>>>>>>>> +               #size-cells = <1>;
>>>>>>>>>> +               device_type = "soc";
>>>>>>>>> Drop device_type here too.
>>>>>>>> Grrr, I just realized that removing the devices type "soc"  
>>>>>>>> has broken
>>>>>>>> fsl_get_sys_freq(). See:
>>>>>>>>
>>>>>>>> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
>>>>>>>>
>>>>>>>> We need a quick fix and we could take the occasion to  
>>>>>>>> establish a common
>>>>>>>> function for the MPC52xx as well, but it's not obvious to me  
>>>>>>>> how to find
>>>>>>>> the SOC node without the device type property.
>>>>>>> SoC node should have a compatible property, just like  
>>>>>>> everything else.
>>>>>>>
>>>>>>> compatible = "fsl,mpc8544-immr";  (immr == Internally Memory  
>>>>>>> Mapped Registers)
>>>>>>>
>>>>>>> Many other boards already do this.
>>>>>> Yes, it does, but searching for the SOC node is not straight- 
>>>>>> forward
>>>>>> because there is no common compatibility string but many CPU- 
>>>>>> specific
>>>>>> compatibility strings, e.g. "fsl,mpc8560-immr", etc. Have I  
>>>>>> missed
>>>>>> something?
>>>>> Choose a new value ("fsl,mpc-immr" perhaps?), document exactly  
>>>>> what it
>>>>> means, and add add it to the end of the compatible list.
>>>> As Scott Wood once pointed out, IMMR does not exists for MPC85xx
>>>> parts. There it's called CCSR.
>>>>
>>>> See this thread:
>>>>
>>>> http://www.mail-archive.com/linuxppc-dev@ozlabs.org/msg12665.html
>>>>
>>>> I still think that
>>>> "fsl,mpc83NN-immr", "fsl,soc", "simple-bus" for 83xx
>>>> and
>>>> "fsl,mpc85NN-ccsr", "fsl,soc", "simple-bus" for 85xx
>>>>
>>>> would be OK, at least to start with. We can always deprecate  
>>>> "fsl,soc"
>>>> compatible in favour of something more elegant, but "fsl,soc"  
>>>> should be
>>>> just fine to replace device_type = "soc".
>>>>
>>>> Also, there is another good thing about "fsl,soc" -- U-Boot already
>>>> finds it for 83xx CPUs. ;-)
>>> Ugh! I just realize the full impact of removing device type "soc".  
>>> It
>>> will break compatibility with U-Boot for many boards. Is it worth  
>>> it?
>>
>> Yes, I know this.  I'm not asking you to fix all the other boards,  
>> but
>> make sure that it is not required for the new board.
>
> Hm, I'm confused, if we want to fix this issue we need first to
>
> - fix all functions in fsl_soc.c searching for the compatible string
>  "fsl,soc" instead of the device type "soc" (or both for backward
>  compatibility).
>
> - fix U-Boot to find the SOC node by looking for "fsl,soc" to insert  
> the
>  proper bus-frequency, at least.
>
> That affects *all* boards using CONFIG_FSL_SOC and requires an
> up-to-date version of U-Boot for new kernels :-(. If that is fixed, I
> can remove the "device_type = "soc";" from socrates.dts (and may  
> more),
> but not right now. Or have I missed something?

I presume the intent is not to break old u-boots w/new kernels, but to  
make it so new .dts don't require device_type = soc in them if using  
new kernels.

- k
Grant Likely - April 1, 2009, 1:49 p.m.
On Wed, Apr 1, 2009 at 7:27 AM, Kumar Gala <galak@kernel.crashing.org> wrote:
>
> On Apr 1, 2009, at 8:10 AM, Wolfgang Grandegger wrote:
>
>> Grant Likely wrote:
>>>
>>> On Wed, Apr 1, 2009 at 1:36 AM, Wolfgang Grandegger <wg@grandegger.com>
>>> wrote:
>>>>
>>>> Anton Vorontsov wrote:
>>>>>
>>>>> On Tue, Mar 31, 2009 at 09:05:28AM -0600, Grant Likely wrote:
>>>>> [...]
>>>>>>>>>>>
>>>>>>>>>>> +       soc8544@e0000000 {
>>>>>>>>>>> +               #address-cells = <1>;
>>>>>>>>>>> +               #size-cells = <1>;
>>>>>>>>>>> +               device_type = "soc";
>>>>>>>>>>
>>>>>>>>>> Drop device_type here too.
>>>>>>>>>
>>>>>>>>> Grrr, I just realized that removing the devices type "soc" has
>>>>>>>>> broken
>>>>>>>>> fsl_get_sys_freq(). See:
>>>>>>>>>
>>>>>>>>> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
>>>>>>>>>
>>>>>>>>> We need a quick fix and we could take the occasion to establish a
>>>>>>>>> common
>>>>>>>>> function for the MPC52xx as well, but it's not obvious to me how to
>>>>>>>>> find
>>>>>>>>> the SOC node without the device type property.
>>>>>>>>
>>>>>>>> SoC node should have a compatible property, just like everything
>>>>>>>> else.
>>>>>>>>
>>>>>>>> compatible = "fsl,mpc8544-immr";  (immr == Internally Memory Mapped
>>>>>>>> Registers)
>>>>>>>>
>>>>>>>> Many other boards already do this.
>>>>>>>
>>>>>>> Yes, it does, but searching for the SOC node is not straight-forward
>>>>>>> because there is no common compatibility string but many CPU-specific
>>>>>>> compatibility strings, e.g. "fsl,mpc8560-immr", etc. Have I missed
>>>>>>> something?
>>>>>>
>>>>>> Choose a new value ("fsl,mpc-immr" perhaps?), document exactly what it
>>>>>> means, and add add it to the end of the compatible list.
>>>>>
>>>>> As Scott Wood once pointed out, IMMR does not exists for MPC85xx
>>>>> parts. There it's called CCSR.
>>>>>
>>>>> See this thread:
>>>>>
>>>>> http://www.mail-archive.com/linuxppc-dev@ozlabs.org/msg12665.html
>>>>>
>>>>> I still think that
>>>>> "fsl,mpc83NN-immr", "fsl,soc", "simple-bus" for 83xx
>>>>> and
>>>>> "fsl,mpc85NN-ccsr", "fsl,soc", "simple-bus" for 85xx
>>>>>
>>>>> would be OK, at least to start with. We can always deprecate "fsl,soc"
>>>>> compatible in favour of something more elegant, but "fsl,soc" should be
>>>>> just fine to replace device_type = "soc".
>>>>>
>>>>> Also, there is another good thing about "fsl,soc" -- U-Boot already
>>>>> finds it for 83xx CPUs. ;-)
>>>>
>>>> Ugh! I just realize the full impact of removing device type "soc". It
>>>> will break compatibility with U-Boot for many boards. Is it worth it?
>>>
>>> Yes, I know this.  I'm not asking you to fix all the other boards, but
>>> make sure that it is not required for the new board.
>>
>> Hm, I'm confused, if we want to fix this issue we need first to
>>
>> - fix all functions in fsl_soc.c searching for the compatible string
>>  "fsl,soc" instead of the device type "soc" (or both for backward
>>  compatibility).
>>
>> - fix U-Boot to find the SOC node by looking for "fsl,soc" to insert the
>>  proper bus-frequency, at least.
>>
>> That affects *all* boards using CONFIG_FSL_SOC and requires an
>> up-to-date version of U-Boot for new kernels :-(. If that is fixed, I
>> can remove the "device_type = "soc";" from socrates.dts (and may more),
>> but not right now. Or have I missed something?
>
> I presume the intent is not to break old u-boots w/new kernels, but to make
> it so new .dts don't require device_type = soc in them if using new kernels.

Exactly.

g.
Wolfgang Grandegger - April 2, 2009, 6:38 a.m.
Hi Kumar,

Kumar Gala wrote:
> 
> On Apr 1, 2009, at 8:10 AM, Wolfgang Grandegger wrote:
> 
>> Grant Likely wrote:
>>> On Wed, Apr 1, 2009 at 1:36 AM, Wolfgang Grandegger
>>> <wg@grandegger.com> wrote:
>>>> Anton Vorontsov wrote:
>>>>> On Tue, Mar 31, 2009 at 09:05:28AM -0600, Grant Likely wrote:
>>>>> [...]
>>>>>>>>>>> +       soc8544@e0000000 {
>>>>>>>>>>> +               #address-cells = <1>;
>>>>>>>>>>> +               #size-cells = <1>;
>>>>>>>>>>> +               device_type = "soc";
>>>>>>>>>> Drop device_type here too.
>>>>>>>>> Grrr, I just realized that removing the devices type "soc" has
>>>>>>>>> broken
>>>>>>>>> fsl_get_sys_freq(). See:
>>>>>>>>>
>>>>>>>>> http://lxr.linux.no/linux+v2.6.29/arch/powerpc/sysdev/fsl_soc.c#L80
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> We need a quick fix and we could take the occasion to establish
>>>>>>>>> a common
>>>>>>>>> function for the MPC52xx as well, but it's not obvious to me
>>>>>>>>> how to find
>>>>>>>>> the SOC node without the device type property.
>>>>>>>> SoC node should have a compatible property, just like everything
>>>>>>>> else.
>>>>>>>>
>>>>>>>> compatible = "fsl,mpc8544-immr";  (immr == Internally Memory
>>>>>>>> Mapped Registers)
>>>>>>>>
>>>>>>>> Many other boards already do this.
>>>>>>> Yes, it does, but searching for the SOC node is not straight-forward
>>>>>>> because there is no common compatibility string but many
>>>>>>> CPU-specific
>>>>>>> compatibility strings, e.g. "fsl,mpc8560-immr", etc. Have I missed
>>>>>>> something?
>>>>>> Choose a new value ("fsl,mpc-immr" perhaps?), document exactly
>>>>>> what it
>>>>>> means, and add add it to the end of the compatible list.
>>>>> As Scott Wood once pointed out, IMMR does not exists for MPC85xx
>>>>> parts. There it's called CCSR.
>>>>>
>>>>> See this thread:
>>>>>
>>>>> http://www.mail-archive.com/linuxppc-dev@ozlabs.org/msg12665.html
>>>>>
>>>>> I still think that
>>>>> "fsl,mpc83NN-immr", "fsl,soc", "simple-bus" for 83xx
>>>>> and
>>>>> "fsl,mpc85NN-ccsr", "fsl,soc", "simple-bus" for 85xx
>>>>>
>>>>> would be OK, at least to start with. We can always deprecate "fsl,soc"
>>>>> compatible in favour of something more elegant, but "fsl,soc"
>>>>> should be
>>>>> just fine to replace device_type = "soc".
>>>>>
>>>>> Also, there is another good thing about "fsl,soc" -- U-Boot already
>>>>> finds it for 83xx CPUs. ;-)
>>>> Ugh! I just realize the full impact of removing device type "soc". It
>>>> will break compatibility with U-Boot for many boards. Is it worth it?
>>>
>>> Yes, I know this.  I'm not asking you to fix all the other boards, but
>>> make sure that it is not required for the new board.
>>
>> Hm, I'm confused, if we want to fix this issue we need first to
>>
>> - fix all functions in fsl_soc.c searching for the compatible string
>>  "fsl,soc" instead of the device type "soc" (or both for backward
>>  compatibility).
>>
>> - fix U-Boot to find the SOC node by looking for "fsl,soc" to insert the
>>  proper bus-frequency, at least.
>>
>> That affects *all* boards using CONFIG_FSL_SOC and requires an
>> up-to-date version of U-Boot for new kernels :-(. If that is fixed, I
>> can remove the "device_type = "soc";" from socrates.dts (and may more),
>> but not right now. Or have I missed something?
> 
> I presume the intent is not to break old u-boots w/new kernels, but to
> make it so new .dts don't require device_type = soc in them if using new
> kernels.

Socrates is a new board and it has no problem using an up-to-date
version of U-Boot. The socrates.dts file in your "next" tree already has
the "device_type = "soc" removed. We need to add "fsl,soc" to the
"compatible" property and update fsl_get_sys_freq(), etc. to search for
it as well. And U-Boot should use the same name to fixup the
frequencies. Are you already working on that issue? Should I provide
patches?

Wolfgang.
Kumar Gala - April 2, 2009, 1:47 p.m.
On Apr 2, 2009, at 1:38 AM, Wolfgang Grandegger wrote:

>
> Socrates is a new board and it has no problem using an up-to-date
> version of U-Boot. The socrates.dts file in your "next" tree already  
> has
> the "device_type = "soc" removed. We need to add "fsl,soc" to the
> "compatible" property and update fsl_get_sys_freq(), etc. to search  
> for
> it as well. And U-Boot should use the same name to fixup the
> frequencies. Are you already working on that issue? Should I provide
> patches?
>

I'm not working on it at all.  I'm also guessing at this point the  
Socrates support is in Linus tree :)

- k
Wolfgang Grandegger - April 2, 2009, 6:50 p.m.
Kumar Gala wrote:
> 
> On Apr 2, 2009, at 1:38 AM, Wolfgang Grandegger wrote:
> 
>>
>> Socrates is a new board and it has no problem using an up-to-date
>> version of U-Boot. The socrates.dts file in your "next" tree already has
>> the "device_type = "soc" removed. We need to add "fsl,soc" to the
>> "compatible" property and update fsl_get_sys_freq(), etc. to search for
>> it as well. And U-Boot should use the same name to fixup the
>> frequencies. Are you already working on that issue? Should I provide
>> patches?
>>
> 
> I'm not working on it at all.  I'm also guessing at this point the
> Socrates support is in Linus tree :)

Yes, I know, but it does not work properly because the "device_type =
"soc" is missing :-(. I did not realize that immediately, sorry. Could
you please apply the fix below re-adding the 'device_type = "soc";' line
for the time being.

Thanks.

Wolfgang.


[PATCH] powerpc/85xx: Re-add the device_type soc to socrates.dts

The device_type "soc" is still required for MPC85xx boards.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
---
 arch/powerpc/boot/dts/socrates.dts |    1 +
 1 file changed, 1 insertion(+)

Index: powerpc/arch/powerpc/boot/dts/socrates.dts
===================================================================
--- powerpc.orig/arch/powerpc/boot/dts/socrates.dts	2009-04-01
15:26:09.000000000 +0200
+++ powerpc/arch/powerpc/boot/dts/socrates.dts	2009-04-02
16:37:09.838719521 +0200
@@ -52,6 +52,7 @@
 	soc8544@e0000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
+		device_type = "soc";

 		ranges = <0x00000000 0xe0000000 0x00100000>;
 		reg = <0xe0000000 0x00001000>;	// CCSRBAR 1M
Kumar Gala - April 2, 2009, 7:52 p.m.
On Apr 2, 2009, at 1:50 PM, Wolfgang Grandegger wrote:

> [PATCH] powerpc/85xx: Re-add the device_type soc to socrates.dts
>
> The device_type "soc" is still required for MPC85xx boards.
>
> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
> ---
> arch/powerpc/boot/dts/socrates.dts |    1 +
> 1 file changed, 1 insertion(+)

applied

- k

Patch

Index: linux-2.6/arch/powerpc/boot/Makefile
===================================================================
--- linux-2.6.orig/arch/powerpc/boot/Makefile
+++ linux-2.6/arch/powerpc/boot/Makefile
@@ -267,6 +267,7 @@  image-$(CONFIG_TQM8555)			+= cuImage.tqm
 image-$(CONFIG_TQM8560)			+= cuImage.tqm8560
 image-$(CONFIG_SBC8548)			+= cuImage.sbc8548
 image-$(CONFIG_SBC8560)			+= cuImage.sbc8560
+image-$(CONFIG_SOCRATES)		+= cuImage.socrates
 image-$(CONFIG_KSI8560)			+= cuImage.ksi8560
 
 # Board ports in arch/powerpc/platform/embedded6xx/Kconfig
Index: linux-2.6/arch/powerpc/boot/dts/socrates.dts
===================================================================
--- /dev/null
+++ linux-2.6/arch/powerpc/boot/dts/socrates.dts
@@ -0,0 +1,337 @@ 
+/*
+ * Device Tree Source for the Socrates board (MPC8544).
+ *
+ * Copyright (c) 2008 Emcraft Systems.
+ * Sergei Poselenov, <sposelenov@emcraft.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "abb,socrates";
+	compatible = "abb,socrates";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8544@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8544@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+
+		ranges = <0x00000000 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00001000>;	// CCSRBAR 1M
+		bus-frequency = <0>;		// Filled in by U-Boot
+		compatible = "fsl,socrates-immr", "simple-bus";
+
+		memory-controller@2000 {
+			compatible = "fsl,8544-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,8544-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@28 {
+				compatible = "winbond,w83782d";
+				reg = <0x28>;
+			};
+			rtc@32 {
+				compatible = "epson,rx8025";
+				reg = <0x32>;
+				interrupts = <7 1>;
+				interrupt-parent = <&mpic>;
+			};
+			dtt@4c {
+				compatible = "dallas,ds75";
+				reg = <0x4c>;
+			};
+			ts@4a {
+				compatible = "ti,tsc2003";
+				reg = <0x4a>;
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		mdio@24520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-mdio";
+			reg = <0x24520 0x20>;
+
+			phy0: ethernet-phy@0 {
+				interrupt-parent = <&mpic>;
+				interrupts = <0 1>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			phy1: ethernet-phy@1 {
+				interrupt-parent = <&mpic>;
+				interrupts = <0 1>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+			tbi0: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		mdio@26520 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,gianfar-tbi";
+			reg = <0x26520 0x20>;
+
+			tbi1: tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
+		};
+
+		enet0: ethernet@24000 {
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		enet1: ethernet@26000 {
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			tbi-handle = <&tbi1>;
+			phy-connection-type = "rgmii-id";
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+
+	localbus {
+		compatible = "fsl,socrates-localbus",
+		             "fsl,mpc85xx-localbus",
+		             "fsl,pq3-localbus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x40>;
+
+		ranges = <0 0 0xfc000000 0x04000000
+			  2 0 0xc8000000 0x04000000
+			  3 0 0xc0000000 0x00100000
+			>; /* Overwritten by U-Boot */
+
+		nor_flash@0,0 {
+			compatible = "amd,s29gl256n", "cfi-flash";
+			bank-width = <2>;
+			reg = <0x0 0x000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x1e0000>;
+				read-only;
+			};
+			partition@1e0000 {
+				label = "dtb";
+				reg = <0x1e0000 0x20000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x200000 0x200000>;
+			};
+			partition@400000 {
+				label = "user";
+				reg = <0x400000 0x3b80000>;
+			};
+			partition@3f80000 {
+				label = "env";
+				reg = <0x3f80000 0x40000>;
+				read-only;
+			};
+			partition@3fc0000 {
+				label = "u-boot";
+				reg = <0x3fc0000 0x40000>;
+				read-only;
+			};
+		};
+
+		display@2,0 {
+			compatible = "fujitsu,lime";
+			reg = <2 0x0 0x4000000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <6 1>;
+		};
+
+		fpga_pic: fpga-pic@3,10 {
+			compatible = "abb,socrates-fpga-pic";
+			reg = <3 0x10 0x10>;
+			interrupt-controller;
+			/* IRQs 2, 10, 11, active low, level-sensitive */
+			interrupts = <2 1 10 1 11 1>;
+			interrupt-parent = <&mpic>;
+			#interrupt-cells = <3>;
+		};
+
+		spi@3,60 {
+			compatible = "abb,socrates-spi";
+			reg = <3 0x60 0x10>;
+			interrupts = <8 4 0>;	// number, type, routing
+			interrupt-parent = <&fpga_pic>;
+		};
+
+		nand@3,70 {
+			compatible = "abb,socrates-nand";
+			reg = <3 0x70 0x04>;
+			bank-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			data@0 {
+				label = "data";
+				reg = <0x0 0x40000000>;
+			};
+		};
+
+		can@3,100 {
+			compatible = "philips,sja1000";
+			reg = <3 0x100 0x80>;
+			interrupts = <2 8 1>;	// number, type, routing
+			interrupt-parent = <&fpga_pic>;
+		};
+	};
+
+	pci0: pci@e0008000 {
+		cell-index = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 1 &mpic 5 1
+				/* IDSEL 0x12 */
+				 0x9000 0x0 0x0 1 &mpic 4 1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
+	};
+
+};
Index: linux-2.6/arch/powerpc/boot/wrapper
===================================================================
--- linux-2.6.orig/arch/powerpc/boot/wrapper
+++ linux-2.6/arch/powerpc/boot/wrapper
@@ -183,7 +183,7 @@  cuboot*)
     *-tqm8541|*-mpc8560*|*-tqm8560|*-tqm8555|*-ksi8560*)
         platformo=$object/cuboot-85xx-cpm2.o
         ;;
-    *-mpc85*|*-tqm85*|*-sbc85*)
+    *-mpc85*|*-tqm85*|*-sbc85*|*-socrates)
         platformo=$object/cuboot-85xx.o
         ;;
     esac
Index: linux-2.6/arch/powerpc/configs/85xx/socrates_defconfig
===================================================================
--- /dev/null
+++ linux-2.6/arch/powerpc/configs/85xx/socrates_defconfig
@@ -0,0 +1,1410 @@ 
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26.2
+# Sat Oct 18 11:06:13 2008
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+# CONFIG_6xx is not set
+CONFIG_PPC_85xx=y
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_E500=y
+CONFIG_BOOKE=y
+CONFIG_FSL_BOOKE=y
+CONFIG_FSL_EMB_PERFMON=y
+# CONFIG_PHYS_64BIT is not set
+CONFIG_SPE=y
+# CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+CONFIG_PPC_MERGE=y
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+CONFIG_PPC_UDBG_16550=y
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+# CONFIG_EPOLL is not set
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform support
+#
+# CONFIG_PPC_MPC512x is not set
+# CONFIG_PPC_MPC5121 is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PQ2ADS is not set
+CONFIG_MPC85xx=y
+# CONFIG_MPC8540_ADS is not set
+# CONFIG_MPC8560_ADS is not set
+# CONFIG_MPC85xx_CDS is not set
+# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC85xx_DS is not set
+CONFIG_SOCRATES=y
+# CONFIG_KSI8560 is not set
+# CONFIG_STX_GP3 is not set
+# CONFIG_TQM8540 is not set
+# CONFIG_TQM8541 is not set
+# CONFIG_TQM8555 is not set
+# CONFIG_TQM8560 is not set
+# CONFIG_SBC8548 is not set
+# CONFIG_SBC8560 is not set
+# CONFIG_IPIC is not set
+CONFIG_MPIC=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPM2 is not set
+# CONFIG_FSL_ULI1575 is not set
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_MISC is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_PM is not set
+CONFIG_SECCOMP=y
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_PPC_INDIRECT_PCI=y
+CONFIG_FSL_SOC=y
+CONFIG_FSL_PCI=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_TASK_SIZE=0xc0000000
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+CONFIG_CAN=y
+CONFIG_CAN_RAW=y
+CONFIG_CAN_BCM=y
+
+#
+# CAN Device Drivers
+#
+# CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_OLD_DRIVERS is not set
+# CONFIG_CAN_SLCAN is not set
+CONFIG_CAN_SJA1000=y
+CONFIG_CAN_SJA1000_MEM_OF=y
+# CONFIG_CAN_EMS_PCI is not set
+# CONFIG_CAN_IXXAT_PCI is not set
+# CONFIG_CAN_PEAK_PCI is not set
+# CONFIG_CAN_KVASER_PCI is not set
+# CONFIG_CAN_MSCAN is not set
+# CONFIG_CAN_DEBUG_DEVICES is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND_FSL_ELBC is not set
+CONFIG_MTD_NAND_SOCRATES=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_E1000E_ENABLED is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+CONFIG_GIANFAR=y
+CONFIG_GFAR_NAPI=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+CONFIG_TOUCHSCREEN_TSC2003=y
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+
+#
+# I2C Hardware Bus support
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_PIIX4 is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PROSAVAGE is not set
+# CONFIG_I2C_SAVAGE4 is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_SOCRATES=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_I5K_AMB is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=y
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SIS5595 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_VT8231 is not set
+CONFIG_SENSORS_W83781D=y
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+CONFIG_HWMON_DEBUG_CHIP=y
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+CONFIG_FB_FOREIGN_ENDIAN=y
+CONFIG_FB_BOTH_ENDIAN=y
+# CONFIG_FB_BIG_ENDIAN is not set
+# CONFIG_FB_LITTLE_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_MB862XX=y
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_MB862XX_LIME=y
+# CONFIG_FB_PRE_INIT_FB is not set
+# CONFIG_FB_CIRRUS is not set
+# CONFIG_FB_PM2 is not set
+# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_OF is not set
+# CONFIG_FB_CT65550 is not set
+# CONFIG_FB_ASILIANT is not set
+# CONFIG_FB_IMSTT is not set
+# CONFIG_FB_VGA16 is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_NVIDIA is not set
+# CONFIG_FB_RIVA is not set
+# CONFIG_FB_MATROX is not set
+# CONFIG_FB_RADEON is not set
+# CONFIG_FB_ATY128 is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_S3 is not set
+# CONFIG_FB_SAVAGE is not set
+# CONFIG_FB_SIS is not set
+# CONFIG_FB_NEOMAGIC is not set
+# CONFIG_FB_KYRO is not set
+# CONFIG_FB_3DFX is not set
+# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_VT8623 is not set
+# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_ARK is not set
+# CONFIG_FB_PM3 is not set
+# CONFIG_FB_FSL_DIU is not set
+# CONFIG_FB_IBM_GXT4500 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PCI=y
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+CONFIG_RTC_DRV_RX8025=y
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_PPC=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
Index: linux-2.6/arch/powerpc/platforms/85xx/Kconfig
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/85xx/Kconfig
+++ linux-2.6/arch/powerpc/platforms/85xx/Kconfig
@@ -51,6 +51,12 @@  config MPC85xx_DS
 	help
 	  This option enables support for the MPC85xx DS (MPC8544 DS) board
 
+config SOCRATES
+	bool "Socrates"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the Socrates board.
+
 config KSI8560
         bool "Emerson KSI8560"
         select DEFAULT_UIMAGE
Index: linux-2.6/arch/powerpc/platforms/85xx/Makefile
===================================================================
--- linux-2.6.orig/arch/powerpc/platforms/85xx/Makefile
+++ linux-2.6/arch/powerpc/platforms/85xx/Makefile
@@ -13,4 +13,6 @@  obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o
 obj-$(CONFIG_SBC8560)     += sbc8560.o
 obj-$(CONFIG_SBC8548)     += sbc8548.o
+obj-$(CONFIG_SOCRATES)    += socrates.o
+obj-$(CONFIG_SOCRATES)    += socrates_fpga_pic.o
 obj-$(CONFIG_KSI8560)	  += ksi8560.o
Index: linux-2.6/arch/powerpc/platforms/85xx/socrates.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/85xx/socrates.c
@@ -0,0 +1,156 @@ 
+/*
+ * Copyright (c) 2008 Emcraft Systems
+ * Sergei Poselenov <sposelenov@emcraft.com>
+ *
+ * Based on MPC8560 ADS and arch/ppc tqm85xx ports
+ *
+ * Maintained by Kumar Gala (see MAINTAINERS for contact information)
+ *
+ * Copyright 2008 Freescale Semiconductor Inc.
+ *
+ * Copyright (c) 2005-2006 DENX Software Engineering
+ * Stefan Roese <sr@denx.de>
+ *
+ * Based on original work by
+ * 	Kumar Gala <kumar.gala@freescale.com>
+ *      Copyright 2004 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/of_platform.h>
+
+#include <asm/system.h>
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+
+#include "socrates_fpga_pic.h"
+
+static void __init socrates_pic_init(void)
+{
+	struct mpic *mpic;
+	struct resource r;
+	struct device_node *np;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (!np) {
+		printk(KERN_ERR "Could not find open-pic node\n");
+		return;
+	}
+
+	if (of_address_to_resource(np, 0, &r)) {
+		printk(KERN_ERR "Could not map mpic register space\n");
+		of_node_put(np);
+		return;
+	}
+
+	mpic = mpic_alloc(np, r.start,
+			MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+			0, 256, " OpenPIC  ");
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_init(mpic);
+
+	np = of_find_compatible_node(NULL, NULL, "abb,socrates-fpga-pic");
+	if (!np) {
+		printk(KERN_ERR "Could not find socrates-fpga-pic node\n");
+		return;
+	}
+	socrates_fpga_pic_init(np);
+	of_node_put(np);
+}
+
+/*
+ * Setup the architecture
+ */
+static void __init socrates_setup_arch(void)
+{
+#ifdef CONFIG_PCI
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("socrates_setup_arch()", 0);
+
+#ifdef CONFIG_PCI
+	for_each_compatible_node(np, "pci", "fsl,mpc8540-pci")
+		fsl_add_bridge(np, 1);
+#endif
+}
+
+static void socrates_show_cpuinfo(struct seq_file *m)
+{
+	uint pvid, svid, phid1;
+	uint memsize = total_memory;
+
+	pvid = mfspr(SPRN_PVR);
+	svid = mfspr(SPRN_SVR);
+
+	seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
+	seq_printf(m, "SVR\t\t: 0x%x\n", svid);
+
+	/* Display cpu Pll setting */
+	phid1 = mfspr(SPRN_HID1);
+	seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
+
+	/* Display the amount of memory */
+	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+}
+
+static struct of_device_id __initdata of_bus_ids[] = {
+	{ .name = "soc", },
+	{ .type = "soc", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(socrates, declare_of_platform_devices);
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init socrates_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "abb,socrates"))
+		return 1;
+
+	return 0;
+}
+
+define_machine(socrates) {
+	.name			= "Socrates",
+	.probe			= socrates_probe,
+	.setup_arch		= socrates_setup_arch,
+	.init_IRQ		= socrates_pic_init,
+	.show_cpuinfo		= socrates_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
Index: linux-2.6/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
===================================================================
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/85xx/socrates_fpga_pic.c
@@ -0,0 +1,320 @@ 
+/*
+ *  Copyright (C) 2008 Ilya Yanok, Emcraft Systems
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+
+#define SOCRATES_FPGA_NUM_IRQS	9
+
+#define FPGA_PIC_IRQCFG		(0x0)
+#define FPGA_PIC_IRQMASK(n)	(0x4 + 0x4 * (n))
+
+#define SOCRATES_FPGA_IRQ_MASK	((1 << SOCRATES_FPGA_NUM_IRQS) - 1)
+
+struct socrates_fpga_irq_info {
+	unsigned int irq_line;
+	int type;
+};
+
+/*
+ * Interrupt routing and type table
+ *
+ * IRQ_TYPE_NONE means the interrupt type is configurable,
+ * otherwise it's fixed to the specified value.
+ */
+static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
+	[0] = {0, IRQ_TYPE_NONE},
+	[1] = {0, IRQ_TYPE_LEVEL_HIGH},
+	[2] = {0, IRQ_TYPE_LEVEL_LOW},
+	[3] = {0, IRQ_TYPE_NONE},
+	[4] = {0, IRQ_TYPE_NONE},
+	[5] = {0, IRQ_TYPE_NONE},
+	[6] = {0, IRQ_TYPE_NONE},
+	[7] = {0, IRQ_TYPE_NONE},
+	[8] = {0, IRQ_TYPE_LEVEL_HIGH},
+};
+
+#define socrates_fpga_irq_to_hw(virq)    ((unsigned int)irq_map[virq].hwirq)
+
+static DEFINE_SPINLOCK(socrates_fpga_pic_lock);
+
+static void __iomem *socrates_fpga_pic_iobase;
+static struct irq_host *socrates_fpga_pic_irq_host;
+static unsigned int socrates_fpga_irqs[3];
+
+static inline uint32_t socrates_fpga_pic_read(int reg)
+{
+	return in_be32(socrates_fpga_pic_iobase + reg);
+}
+
+static inline void socrates_fpga_pic_write(int reg, uint32_t val)
+{
+	out_be32(socrates_fpga_pic_iobase + reg, val);
+}
+
+static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq)
+{
+	uint32_t cause;
+	unsigned long flags;
+	int i;
+
+	for (i = 0; i < 3; i++) {
+		if (irq == socrates_fpga_irqs[i])
+			break;
+	}
+	if (i == 3)
+		return NO_IRQ;
+
+	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	cause = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(i));
+	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	for (i = SOCRATES_FPGA_NUM_IRQS - 1; i >= 0; i--) {
+		if (cause >> (i + 16))
+			break;
+	}
+	return irq_linear_revmap(socrates_fpga_pic_irq_host,
+			(irq_hw_number_t)i);
+}
+
+void socrates_fpga_pic_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned int cascade_irq;
+
+	/*
+	 * See if we actually have an interrupt, call generic handling code if
+	 * we do.
+	 */
+	cascade_irq = socrates_fpga_pic_get_irq(irq);
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+	desc->chip->eoi(irq);
+
+}
+
+static void socrates_fpga_pic_ack(unsigned int virq)
+{
+	unsigned long flags;
+	unsigned int hwirq, irq_line;
+	uint32_t mask;
+
+	hwirq = socrates_fpga_irq_to_hw(virq);
+
+	irq_line = fpga_irqs[hwirq].irq_line;
+	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+		& SOCRATES_FPGA_IRQ_MASK;
+	mask |= (1 << (hwirq + 16));
+	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_mask(unsigned int virq)
+{
+	unsigned long flags;
+	unsigned int hwirq;
+	int irq_line;
+	u32 mask;
+
+	hwirq = socrates_fpga_irq_to_hw(virq);
+
+	irq_line = fpga_irqs[hwirq].irq_line;
+	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+		& SOCRATES_FPGA_IRQ_MASK;
+	mask &= ~(1 << hwirq);
+	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_mask_ack(unsigned int virq)
+{
+	unsigned long flags;
+	unsigned int hwirq;
+	int irq_line;
+	u32 mask;
+
+	hwirq = socrates_fpga_irq_to_hw(virq);
+
+	irq_line = fpga_irqs[hwirq].irq_line;
+	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+		& SOCRATES_FPGA_IRQ_MASK;
+	mask &= ~(1 << hwirq);
+	mask |= (1 << (hwirq + 16));
+	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_unmask(unsigned int virq)
+{
+	unsigned long flags;
+	unsigned int hwirq;
+	int irq_line;
+	u32 mask;
+
+	hwirq = socrates_fpga_irq_to_hw(virq);
+
+	irq_line = fpga_irqs[hwirq].irq_line;
+	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+		& SOCRATES_FPGA_IRQ_MASK;
+	mask |= (1 << hwirq);
+	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static void socrates_fpga_pic_eoi(unsigned int virq)
+{
+	unsigned long flags;
+	unsigned int hwirq;
+	int irq_line;
+	u32 mask;
+
+	hwirq = socrates_fpga_irq_to_hw(virq);
+
+	irq_line = fpga_irqs[hwirq].irq_line;
+	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
+		& SOCRATES_FPGA_IRQ_MASK;
+	mask |= (1 << (hwirq + 16));
+	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
+	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+}
+
+static int socrates_fpga_pic_set_type(unsigned int virq,
+		unsigned int flow_type)
+{
+	unsigned long flags;
+	unsigned int hwirq;
+	int polarity;
+	u32 mask;
+
+	hwirq = socrates_fpga_irq_to_hw(virq);
+
+	if (fpga_irqs[hwirq].type != IRQ_TYPE_NONE)
+		return -EINVAL;
+
+	switch (flow_type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		polarity = 1;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		polarity = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	mask = socrates_fpga_pic_read(FPGA_PIC_IRQCFG);
+	if (polarity)
+		mask |= (1 << hwirq);
+	else
+		mask &= ~(1 << hwirq);
+	socrates_fpga_pic_write(FPGA_PIC_IRQCFG, mask);
+	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+	return 0;
+}
+
+static struct irq_chip socrates_fpga_pic_chip = {
+	.typename       = " FPGA-PIC ",
+	.ack		= socrates_fpga_pic_ack,
+	.mask           = socrates_fpga_pic_mask,
+	.mask_ack       = socrates_fpga_pic_mask_ack,
+	.unmask         = socrates_fpga_pic_unmask,
+	.eoi		= socrates_fpga_pic_eoi,
+	.set_type	= socrates_fpga_pic_set_type,
+};
+
+static int socrates_fpga_pic_host_map(struct irq_host *h, unsigned int virq,
+		irq_hw_number_t hwirq)
+{
+	/* All interrupts are LEVEL sensitive */
+	get_irq_desc(virq)->status |= IRQ_LEVEL;
+	set_irq_chip_and_handler(virq, &socrates_fpga_pic_chip,
+			handle_fasteoi_irq);
+
+	return 0;
+}
+
+static int socrates_fpga_pic_host_xlate(struct irq_host *h,
+		struct device_node *ct,	u32 *intspec, unsigned int intsize,
+		irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+	struct socrates_fpga_irq_info *fpga_irq = &fpga_irqs[intspec[0]];
+
+	*out_hwirq = intspec[0];
+	if  (fpga_irq->type == IRQ_TYPE_NONE) {
+		/* type is configurable */
+		if (intspec[1] != IRQ_TYPE_LEVEL_LOW &&
+		    intspec[1] != IRQ_TYPE_LEVEL_HIGH) {
+			printk(KERN_WARNING "FPGA PIC: invalid irq type, "
+			       "setting default active low\n");
+			*out_flags = IRQ_TYPE_LEVEL_LOW;
+		} else {
+			*out_flags = intspec[1];
+		}
+	} else {
+		/* type is fixed */
+		*out_flags = fpga_irq->type;
+	}
+
+	/* Use specified interrupt routing */
+	if (intspec[2] <= 2)
+		fpga_irq->irq_line = intspec[2];
+	else
+		printk(KERN_WARNING "FPGA PIC: invalid irq routing\n");
+
+	return 0;
+}
+
+static struct irq_host_ops socrates_fpga_pic_host_ops = {
+	.map    = socrates_fpga_pic_host_map,
+	.xlate  = socrates_fpga_pic_host_xlate,
+};
+
+void socrates_fpga_pic_init(struct device_node *pic)
+{
+	unsigned long flags;
+	int i;
+
+	/* Setup an irq_host structure */
+	socrates_fpga_pic_irq_host = irq_alloc_host(pic, IRQ_HOST_MAP_LINEAR,
+			SOCRATES_FPGA_NUM_IRQS,	&socrates_fpga_pic_host_ops,
+			SOCRATES_FPGA_NUM_IRQS);
+	if (socrates_fpga_pic_irq_host == NULL) {
+		printk(KERN_ERR "FPGA PIC: Unable to allocate host\n");
+		return;
+	}
+
+	for (i = 0; i < 3; i++) {
+		socrates_fpga_irqs[i] = irq_of_parse_and_map(pic, i);
+		if (socrates_fpga_irqs[i] == NO_IRQ) {
+			printk(KERN_WARNING "FPGA PIC: can't get irq%d.\n", i);
+			continue;
+		}
+		set_irq_chained_handler(socrates_fpga_irqs[i],
+				socrates_fpga_pic_cascade);
+	}
+
+	socrates_fpga_pic_iobase = of_iomap(pic, 0);
+
+	spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
+	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(0),
+			SOCRATES_FPGA_IRQ_MASK << 16);
+	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(1),
+			SOCRATES_FPGA_IRQ_MASK << 16);
+	socrates_fpga_pic_write(FPGA_PIC_IRQMASK(2),
+			SOCRATES_FPGA_IRQ_MASK << 16);
+	spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
+
+	printk(KERN_INFO "FPGA PIC: Setting up Socrates FPGA PIC\n");
+}
Index: linux-2.6/arch/powerpc/platforms/85xx/socrates_fpga_pic.h
===================================================================
--- /dev/null
+++ linux-2.6/arch/powerpc/platforms/85xx/socrates_fpga_pic.h
@@ -0,0 +1,16 @@ 
+/*
+ *  Copyright (C) 2008 Ilya Yanok, Emcraft Systems
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef SOCRATES_FPGA_PIC_H
+#define SOCRATES_FPGA_PIC_H
+
+void socrates_fpga_pic_init(struct device_node *pic);
+
+#endif