===================================================================
@@ -121,6 +121,8 @@
/* Descriptor table word 0 bit (when DTA32M = 1) */
#define SATA_RCAR_DTEND BIT(0)
+#define SATA_RCAR_DMA_BOUNDARY 0x1FFFFFFEUL
+
struct sata_rcar_priv {
void __iomem *base;
struct clk *clk;
@@ -575,7 +577,14 @@ static u8 sata_rcar_bmdma_status(struct
}
static struct scsi_host_template sata_rcar_sht = {
- ATA_BMDMA_SHT(DRV_NAME),
+ ATA_BASE_SHT(DRV_NAME),
+ /*
+ * This controller allows transfer chunks up to 512MB which cross 64KB
+ * boundaries, therefore the DMA limits are more relaxed than standard
+ * ATA SFF.
+ */
+ .sg_tablesize = ATA_MAX_PRD,
+ .dma_boundary = SATA_RCAR_DMA_BOUNDARY,
};
static struct ata_port_operations sata_rcar_port_ops = {
Using ATA_BMDMA_SHT() to intialize 'sata_rcar_sht' was suboptimal as the R-Car descriptor table transfer counter is 28 bits wide (bit 1 to bit 28), so that the 'dma_boundary' field of 0xFFFF is just too small, as well as the 'sg_tablesize' field of 128. Use ATA_BASE_SHT() to initialize 'sata_rcar_sht' instead and give proper values to the 'dma_boundary' and 'sg_tablesize' fields explicitly. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> --- drivers/ata/sata_rcar.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html