Message ID | 1369310405-21112-1-git-send-email-libo.chen@huawei.com |
---|---|
State | Changes Requested |
Headers | show |
Hi Libo, >-----Original Message----- >From: Libo Chen [mailto:libo.chen@huawei.com] >Sent: Thursday, May 23, 2013 8:00 PM >To: wsa@the-dreams.de >Cc: guz.fnst@cn.fujitsu.com; Zhang, Sonic; uclinux-dist- >devel@blackfin.uclinux.org; linux-i2c@vger.kernel.org; linux- >kernel@vger.kernel.org; lizefan@huawei.com; libo.chen@huawei.com >Subject: [PATCH RFC v3 1/3] i2c: i2c-bfin-twi: convert to devm_* API > >peripheral_request_list has got free if any one faild, so no need to free again in err >case. >aovid this, convert them to devm_* API > >Signed-off-by: Libo Chen <libo.chen@huawei.com> >--- > drivers/i2c/busses/i2c-bfin-twi.c | 38 +++++++++--------------------------- > 1 files changed, 10 insertions(+), 28 deletions(-) > >diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c >index 05080c4..2b99c48 100644 >--- a/drivers/i2c/busses/i2c-bfin-twi.c >+++ b/drivers/i2c/busses/i2c-bfin-twi.c >@@ -621,35 +621,27 @@ static int i2c_bfin_twi_probe(struct platform_device >*pdev) > int rc; > unsigned int clkhilow; > >- iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL); >+ iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface), >+ GFP_KERNEL); > if (!iface) { > dev_err(&pdev->dev, "Cannot allocate memory\n"); >- rc = -ENOMEM; >- goto out_error_nomem; >+ return -ENOMEM; > } > > spin_lock_init(&(iface->lock)); > > /* Find and map our resources */ > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >- if (res == NULL) { >- dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); >- rc = -ENOENT; >- goto out_error_get_res; >- } Why remove the resource mem check? Regards, Sonic -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2013/5/24 10:49, Zhang, Sonic wrote: >> >- iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL); >> >+ iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface), >> >+ GFP_KERNEL); >> > if (!iface) { >> > dev_err(&pdev->dev, "Cannot allocate memory\n"); >> >- rc = -ENOMEM; >> >- goto out_error_nomem; >> >+ return -ENOMEM; >> > } >> > >> > spin_lock_init(&(iface->lock)); >> > >> > /* Find and map our resources */ >> > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> >- if (res == NULL) { >> >- dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); >> >- rc = -ENOENT; >> >- goto out_error_get_res; >> >- } > Why remove the resource mem check? > > Regards, > > Sonic devm_ioremap_resource() had done for us, you can refernce the function`comment. Thanks, Libo -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 23 May 2013 17:30, Libo Chen <libo.chen@huawei.com> wrote: > peripheral_request_list has got free if any one faild, so no need to free again in err case. > aovid this, convert them to devm_* API > > Signed-off-by: Libo Chen <libo.chen@huawei.com> It is a good practice to include changelog while submitting revised versions of the patch. > --- > drivers/i2c/busses/i2c-bfin-twi.c | 38 +++++++++--------------------------- > 1 files changed, 10 insertions(+), 28 deletions(-) > > diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c > index 05080c4..2b99c48 100644 > --- a/drivers/i2c/busses/i2c-bfin-twi.c > +++ b/drivers/i2c/busses/i2c-bfin-twi.c > @@ -621,35 +621,27 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) > int rc; > unsigned int clkhilow; > > - iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL); > + iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface), > + GFP_KERNEL); > if (!iface) { > dev_err(&pdev->dev, "Cannot allocate memory\n"); This error message is not really required. > - rc = -ENOMEM; > - goto out_error_nomem; > + return -ENOMEM; > } > > spin_lock_init(&(iface->lock)); > > /* Find and map our resources */ > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); > - if (res == NULL) { > - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); > - rc = -ENOENT; > - goto out_error_get_res; > - } > - > - iface->regs_base = ioremap(res->start, resource_size(res)); > - if (iface->regs_base == NULL) { > + iface->regs_base = devm_ioremap_resource(&pdev->dev, res); > + if (IS_ERR(iface->regs_base)) { > dev_err(&pdev->dev, "Cannot map IO\n"); devm_ioremap_resource prints out the error messages. So the above line is redundant. > - rc = -ENXIO; > - goto out_error_ioremap; > + return -ENXIO; Why not return PTR_ERR(iface->regs_base)? > } > > iface->irq = platform_get_irq(pdev, 0); > if (iface->irq < 0) { > dev_err(&pdev->dev, "No IRQ specified\n"); > - rc = -ENOENT; > - goto out_error_no_irq; > + return -ENOENT; > } > > p_adap = &iface->adap; > @@ -666,10 +658,10 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) > "i2c-bfin-twi"); > if (rc) { > dev_err(&pdev->dev, "Can't setup pin mux!\n"); > - goto out_error_pin_mux; > + return rc; > } > > - rc = request_irq(iface->irq, bfin_twi_interrupt_entry, > + rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry, > 0, pdev->name, iface); > if (rc) { > dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq); > @@ -707,16 +699,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) > return 0; > > out_error_add_adapter: > - free_irq(iface->irq, iface); > out_error_req_irq: > -out_error_no_irq: > peripheral_free_list((unsigned short *)pdev->dev.platform_data); > -out_error_pin_mux: > - iounmap(iface->regs_base); > -out_error_ioremap: > -out_error_get_res: > - kfree(iface); > -out_error_nomem: > + Empty line not required. You could probably combine all the empty labels into one meaningful label above. > return rc;
Acked-by: Sonic Zhang <sonic.zhang@analog.com> >-----Original Message----- >From: Libo Chen [mailto:libo.chen@huawei.com] >Sent: Thursday, May 23, 2013 8:00 PM >To: wsa@the-dreams.de >Cc: guz.fnst@cn.fujitsu.com; Zhang, Sonic; uclinux-dist- >devel@blackfin.uclinux.org; linux-i2c@vger.kernel.org; linux- >kernel@vger.kernel.org; lizefan@huawei.com; libo.chen@huawei.com >Subject: [PATCH RFC v3 1/3] i2c: i2c-bfin-twi: convert to devm_* API > >peripheral_request_list has got free if any one faild, so no need to free again in err >case. >aovid this, convert them to devm_* API > >Signed-off-by: Libo Chen <libo.chen@huawei.com> >--- > drivers/i2c/busses/i2c-bfin-twi.c | 38 +++++++++--------------------------- > 1 files changed, 10 insertions(+), 28 deletions(-) > >diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c >index 05080c4..2b99c48 100644 >--- a/drivers/i2c/busses/i2c-bfin-twi.c >+++ b/drivers/i2c/busses/i2c-bfin-twi.c >@@ -621,35 +621,27 @@ static int i2c_bfin_twi_probe(struct platform_device >*pdev) > int rc; > unsigned int clkhilow; > >- iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL); >+ iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface), >+ GFP_KERNEL); > if (!iface) { > dev_err(&pdev->dev, "Cannot allocate memory\n"); >- rc = -ENOMEM; >- goto out_error_nomem; >+ return -ENOMEM; > } > > spin_lock_init(&(iface->lock)); > > /* Find and map our resources */ > res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >- if (res == NULL) { >- dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); >- rc = -ENOENT; >- goto out_error_get_res; >- } >- >- iface->regs_base = ioremap(res->start, resource_size(res)); >- if (iface->regs_base == NULL) { >+ iface->regs_base = devm_ioremap_resource(&pdev->dev, res); >+ if (IS_ERR(iface->regs_base)) { > dev_err(&pdev->dev, "Cannot map IO\n"); >- rc = -ENXIO; >- goto out_error_ioremap; >+ return -ENXIO; > } > > iface->irq = platform_get_irq(pdev, 0); > if (iface->irq < 0) { > dev_err(&pdev->dev, "No IRQ specified\n"); >- rc = -ENOENT; >- goto out_error_no_irq; >+ return -ENOENT; > } > > p_adap = &iface->adap; >@@ -666,10 +658,10 @@ static int i2c_bfin_twi_probe(struct platform_device >*pdev) > "i2c-bfin-twi"); > if (rc) { > dev_err(&pdev->dev, "Can't setup pin mux!\n"); >- goto out_error_pin_mux; >+ return rc; > } > >- rc = request_irq(iface->irq, bfin_twi_interrupt_entry, >+ rc = devm_request_irq(&pdev->dev, iface->irq, >+bfin_twi_interrupt_entry, > 0, pdev->name, iface); > if (rc) { > dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq); @@ - >707,16 +699,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) > return 0; > > out_error_add_adapter: >- free_irq(iface->irq, iface); > out_error_req_irq: >-out_error_no_irq: > peripheral_free_list((unsigned short *)pdev->dev.platform_data); >-out_error_pin_mux: >- iounmap(iface->regs_base); >-out_error_ioremap: >-out_error_get_res: >- kfree(iface); >-out_error_nomem: >+ > return rc; > } > >@@ -725,10 +710,7 @@ static int i2c_bfin_twi_remove(struct platform_device >*pdev) > struct bfin_twi_iface *iface = platform_get_drvdata(pdev); > > i2c_del_adapter(&(iface->adap)); >- free_irq(iface->irq, iface); > peripheral_free_list((unsigned short *)pdev->dev.platform_data); >- iounmap(iface->regs_base); >- kfree(iface); > > return 0; > } >-- >1.7.1 > > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
thanks for your review. I will update later. Libo On 2013/5/24 11:19, Sachin Kamat wrote: > On 23 May 2013 17:30, Libo Chen <libo.chen@huawei.com> wrote: >> peripheral_request_list has got free if any one faild, so no need to free again in err case. >> aovid this, convert them to devm_* API >> >> Signed-off-by: Libo Chen <libo.chen@huawei.com> > > It is a good practice to include changelog while submitting revised > versions of the patch. > >> --- >> drivers/i2c/busses/i2c-bfin-twi.c | 38 +++++++++--------------------------- >> 1 files changed, 10 insertions(+), 28 deletions(-) >> >> diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c >> index 05080c4..2b99c48 100644 >> --- a/drivers/i2c/busses/i2c-bfin-twi.c >> +++ b/drivers/i2c/busses/i2c-bfin-twi.c >> @@ -621,35 +621,27 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) >> int rc; >> unsigned int clkhilow; >> >> - iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL); >> + iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface), >> + GFP_KERNEL); >> if (!iface) { >> dev_err(&pdev->dev, "Cannot allocate memory\n"); > > This error message is not really required. > >> - rc = -ENOMEM; >> - goto out_error_nomem; >> + return -ENOMEM; >> } >> >> spin_lock_init(&(iface->lock)); >> >> /* Find and map our resources */ >> res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> - if (res == NULL) { >> - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); >> - rc = -ENOENT; >> - goto out_error_get_res; >> - } >> - >> - iface->regs_base = ioremap(res->start, resource_size(res)); >> - if (iface->regs_base == NULL) { >> + iface->regs_base = devm_ioremap_resource(&pdev->dev, res); >> + if (IS_ERR(iface->regs_base)) { >> dev_err(&pdev->dev, "Cannot map IO\n"); > > devm_ioremap_resource prints out the error messages. So the above line > is redundant. > >> - rc = -ENXIO; >> - goto out_error_ioremap; >> + return -ENXIO; > > Why not return PTR_ERR(iface->regs_base)? > >> } >> >> iface->irq = platform_get_irq(pdev, 0); >> if (iface->irq < 0) { >> dev_err(&pdev->dev, "No IRQ specified\n"); >> - rc = -ENOENT; >> - goto out_error_no_irq; >> + return -ENOENT; >> } >> >> p_adap = &iface->adap; >> @@ -666,10 +658,10 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) >> "i2c-bfin-twi"); >> if (rc) { >> dev_err(&pdev->dev, "Can't setup pin mux!\n"); >> - goto out_error_pin_mux; >> + return rc; >> } >> >> - rc = request_irq(iface->irq, bfin_twi_interrupt_entry, >> + rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry, >> 0, pdev->name, iface); >> if (rc) { >> dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq); >> @@ -707,16 +699,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) >> return 0; >> >> out_error_add_adapter: >> - free_irq(iface->irq, iface); >> out_error_req_irq: >> -out_error_no_irq: >> peripheral_free_list((unsigned short *)pdev->dev.platform_data); >> -out_error_pin_mux: >> - iounmap(iface->regs_base); >> -out_error_ioremap: >> -out_error_get_res: >> - kfree(iface); >> -out_error_nomem: >> + > > Empty line not required. > > You could probably combine all the empty labels into one meaningful label above. > >> return rc; > > -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, May 28, 2013 at 02:42:22PM +0800, Libo Chen wrote:
> thanks for your review. I will update later.
I agree with the remarks from Sachin.
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 05080c4..2b99c48 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -621,35 +621,27 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) int rc; unsigned int clkhilow; - iface = kzalloc(sizeof(struct bfin_twi_iface), GFP_KERNEL); + iface = devm_kzalloc(&pdev->dev, sizeof(struct bfin_twi_iface), + GFP_KERNEL); if (!iface) { dev_err(&pdev->dev, "Cannot allocate memory\n"); - rc = -ENOMEM; - goto out_error_nomem; + return -ENOMEM; } spin_lock_init(&(iface->lock)); /* Find and map our resources */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - rc = -ENOENT; - goto out_error_get_res; - } - - iface->regs_base = ioremap(res->start, resource_size(res)); - if (iface->regs_base == NULL) { + iface->regs_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(iface->regs_base)) { dev_err(&pdev->dev, "Cannot map IO\n"); - rc = -ENXIO; - goto out_error_ioremap; + return -ENXIO; } iface->irq = platform_get_irq(pdev, 0); if (iface->irq < 0) { dev_err(&pdev->dev, "No IRQ specified\n"); - rc = -ENOENT; - goto out_error_no_irq; + return -ENOENT; } p_adap = &iface->adap; @@ -666,10 +658,10 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) "i2c-bfin-twi"); if (rc) { dev_err(&pdev->dev, "Can't setup pin mux!\n"); - goto out_error_pin_mux; + return rc; } - rc = request_irq(iface->irq, bfin_twi_interrupt_entry, + rc = devm_request_irq(&pdev->dev, iface->irq, bfin_twi_interrupt_entry, 0, pdev->name, iface); if (rc) { dev_err(&pdev->dev, "Can't get IRQ %d !\n", iface->irq); @@ -707,16 +699,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) return 0; out_error_add_adapter: - free_irq(iface->irq, iface); out_error_req_irq: -out_error_no_irq: peripheral_free_list((unsigned short *)pdev->dev.platform_data); -out_error_pin_mux: - iounmap(iface->regs_base); -out_error_ioremap: -out_error_get_res: - kfree(iface); -out_error_nomem: + return rc; } @@ -725,10 +710,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev) struct bfin_twi_iface *iface = platform_get_drvdata(pdev); i2c_del_adapter(&(iface->adap)); - free_irq(iface->irq, iface); peripheral_free_list((unsigned short *)pdev->dev.platform_data); - iounmap(iface->regs_base); - kfree(iface); return 0; }
peripheral_request_list has got free if any one faild, so no need to free again in err case. aovid this, convert them to devm_* API Signed-off-by: Libo Chen <libo.chen@huawei.com> --- drivers/i2c/busses/i2c-bfin-twi.c | 38 +++++++++--------------------------- 1 files changed, 10 insertions(+), 28 deletions(-)