@@ -3606,6 +3606,44 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface.
You will probably want to define these to avoid a really noisy system
when storing the env in UBI.
+ Define this if you have an MMC device which you want to use for the
+ - CONFIG_SYS_MMC_ENV_DEV:
+ Specifies which MMC device the environment is stored in.
+ - CONFIG_SYS_MMC_ENV_PART (optional):
+ Specifies which MMC partition the environment is stored in. If not
+ set, defaults to partition 0, the user area. Common values might be
+ 1 (first MMC boot partition), 2 (second MMC boot partition).
+ - CONFIG_ENV_OFFSET:
+ - CONFIG_ENV_SIZE:
+ These two #defines specify the offset and size of the environment
+ area within the specified MMC device.
+ These two values must be aligned to an MMC sector boundary.
+ - CONFIG_ENV_OFFSET_REDUND (optional):
+ Specifies a second storage area, of CONFIG_ENV_SIZE size, used to
+ hold a redundant copy of the environment data. This provides a
+ valid backup copy in case the other copy is corrupted, e.g. due
+ to a power failure during a "saveenv" operation.
+ This value must also be aligned to an MMC sector boundary.
+ - CONFIG_ENV_SIZE_REDUND (optional):
+ This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is
+ set. If this value is set, it must be set to the same value as
Defines offset to the initial SPI buffer area in DPRAM. The