Patchwork [v4,11/12] ARM: kirkwood: remove redundant DT board files

login
register
mail settings
Submitter Sebastian Hesselbarth
Date May 21, 2013, 4:41 p.m.
Message ID <1369154510-4927-12-git-send-email-sebastian.hesselbarth@gmail.com>
Download mbox | patch
Permalink /patch/245362/
State Not Applicable
Headers show

Comments

Sebastian Hesselbarth - May 21, 2013, 4:41 p.m.
With DT support for mv643xx_eth, board specific init for some boards now
is unneccessary. Remove those board files, Kconfig entries, and
corresponding entries in kirkwood_defconfig.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Note: board-km_kirkwood.c is also removed, as Valentin Longchamp confirmed
the lock-up is not caused by accessing clock gating registers but rather
non-existent device registers. This will be addressed by dtsi separation
for kirkwood and bobcat SoC variants.

Changelog:
v3->v4:
- remove more boards that don't require board specific setup

Cc: David Miller <davem@davemloft.net>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
---
 arch/arm/configs/kirkwood_defconfig           |   16 ----
 arch/arm/mach-kirkwood/Kconfig                |  117 -------------------------
 arch/arm/mach-kirkwood/Makefile               |   16 ----
 arch/arm/mach-kirkwood/board-dnskw.c          |    7 --
 arch/arm/mach-kirkwood/board-dockstar.c       |   32 -------
 arch/arm/mach-kirkwood/board-dreamplug.c      |   35 --------
 arch/arm/mach-kirkwood/board-dt.c             |   38 --------
 arch/arm/mach-kirkwood/board-goflexnet.c      |   34 -------
 arch/arm/mach-kirkwood/board-guruplug.c       |   33 -------
 arch/arm/mach-kirkwood/board-ib62x0.c         |   29 ------
 arch/arm/mach-kirkwood/board-iconnect.c       |   10 ---
 arch/arm/mach-kirkwood/board-iomega_ix2_200.c |   34 -------
 arch/arm/mach-kirkwood/board-km_kirkwood.c    |   44 ----------
 arch/arm/mach-kirkwood/board-lsxl.c           |   16 ----
 arch/arm/mach-kirkwood/board-mplcec4.c        |   14 ---
 arch/arm/mach-kirkwood/board-ns2.c            |   35 --------
 arch/arm/mach-kirkwood/board-openblocks_a6.c  |   26 ------
 arch/arm/mach-kirkwood/board-readynas.c       |    6 --
 arch/arm/mach-kirkwood/board-ts219.c          |   13 ---
 arch/arm/mach-kirkwood/board-usi_topkick.c    |   29 ------
 20 files changed, 584 deletions(-)
 delete mode 100644 arch/arm/mach-kirkwood/board-dockstar.c
 delete mode 100644 arch/arm/mach-kirkwood/board-dreamplug.c
 delete mode 100644 arch/arm/mach-kirkwood/board-goflexnet.c
 delete mode 100644 arch/arm/mach-kirkwood/board-guruplug.c
 delete mode 100644 arch/arm/mach-kirkwood/board-ib62x0.c
 delete mode 100644 arch/arm/mach-kirkwood/board-iomega_ix2_200.c
 delete mode 100644 arch/arm/mach-kirkwood/board-km_kirkwood.c
 delete mode 100644 arch/arm/mach-kirkwood/board-ns2.c
 delete mode 100644 arch/arm/mach-kirkwood/board-openblocks_a6.c
 delete mode 100644 arch/arm/mach-kirkwood/board-usi_topkick.c
Simon Baatz - May 22, 2013, 8:36 p.m.
Hi Sebastian,

On Tue, May 21, 2013 at 06:41:49PM +0200, Sebastian Hesselbarth wrote:
> With DT support for mv643xx_eth, board specific init for some boards now
> is unneccessary. Remove those board files, Kconfig entries, and
> corresponding entries in kirkwood_defconfig.
> 
> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
> ---
> Note: board-km_kirkwood.c is also removed, as Valentin Longchamp confirmed
> the lock-up is not caused by accessing clock gating registers but rather
> non-existent device registers. This will be addressed by dtsi separation
> for kirkwood and bobcat SoC variants.
> 
> Changelog:
> v3->v4:
> - remove more boards that don't require board specific setup
> 
> Cc: David Miller <davem@davemloft.net>
> Cc: Lennert Buytenhek <buytenh@wantstofly.org>
> Cc: Jason Cooper <jason@lakedaemon.net>
> Cc: Andrew Lunn <andrew@lunn.ch>
> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
> Cc: netdev@vger.kernel.org
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: linuxppc-dev@lists.ozlabs.org
> Cc: linux-kernel@vger.kernel.org
> ---
>  arch/arm/configs/kirkwood_defconfig           |   16 ----
>  arch/arm/mach-kirkwood/Kconfig                |  117 -------------------------
>  arch/arm/mach-kirkwood/Makefile               |   16 ----
>  arch/arm/mach-kirkwood/board-dnskw.c          |    7 --
>  arch/arm/mach-kirkwood/board-dockstar.c       |   32 -------
>  arch/arm/mach-kirkwood/board-dreamplug.c      |   35 --------
>  arch/arm/mach-kirkwood/board-dt.c             |   38 --------
>  arch/arm/mach-kirkwood/board-goflexnet.c      |   34 -------
>  arch/arm/mach-kirkwood/board-guruplug.c       |   33 -------
>  arch/arm/mach-kirkwood/board-ib62x0.c         |   29 ------
>  arch/arm/mach-kirkwood/board-iconnect.c       |   10 ---
>  arch/arm/mach-kirkwood/board-iomega_ix2_200.c |   34 -------
>  arch/arm/mach-kirkwood/board-km_kirkwood.c    |   44 ----------
>  arch/arm/mach-kirkwood/board-lsxl.c           |   16 ----
>  arch/arm/mach-kirkwood/board-mplcec4.c        |   14 ---
>  arch/arm/mach-kirkwood/board-ns2.c            |   35 --------
>  arch/arm/mach-kirkwood/board-openblocks_a6.c  |   26 ------
>  arch/arm/mach-kirkwood/board-readynas.c       |    6 --
>  arch/arm/mach-kirkwood/board-ts219.c          |   13 ---
>  arch/arm/mach-kirkwood/board-usi_topkick.c    |   29 ------
>  20 files changed, 584 deletions(-)
>  delete mode 100644 arch/arm/mach-kirkwood/board-dockstar.c
>  delete mode 100644 arch/arm/mach-kirkwood/board-dreamplug.c
>  delete mode 100644 arch/arm/mach-kirkwood/board-goflexnet.c
>  delete mode 100644 arch/arm/mach-kirkwood/board-guruplug.c
>  delete mode 100644 arch/arm/mach-kirkwood/board-ib62x0.c
>  delete mode 100644 arch/arm/mach-kirkwood/board-iomega_ix2_200.c
>  delete mode 100644 arch/arm/mach-kirkwood/board-km_kirkwood.c
>  delete mode 100644 arch/arm/mach-kirkwood/board-ns2.c
>  delete mode 100644 arch/arm/mach-kirkwood/board-openblocks_a6.c
>  delete mode 100644 arch/arm/mach-kirkwood/board-usi_topkick.c
> 
...
> diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
> index 8db388a..a86b41c 100644
> --- a/arch/arm/mach-kirkwood/board-dt.c
> +++ b/arch/arm/mach-kirkwood/board-dt.c
> @@ -104,59 +104,21 @@ static void __init kirkwood_dt_init(void)
>  	kexec_reinit = kirkwood_enable_pcie;
>  #endif
>  
> -	if (of_machine_is_compatible("globalscale,dreamplug"))
> -		dreamplug_init();
> -
> -	if (of_machine_is_compatible("globalscale,guruplug"))
> -		guruplug_dt_init();
> -
>  	if (of_machine_is_compatible("dlink,dns-kirkwood"))
>  		dnskw_init();
>  
> -	if (of_machine_is_compatible("iom,iconnect"))
> -		iconnect_init();
> -
> -	if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
> -		ib62x0_init();
> -
>  	if (of_machine_is_compatible("qnap,ts219"))
>  		qnap_dt_ts219_init();
>  
> -	if (of_machine_is_compatible("seagate,dockstar"))
> -		dockstar_dt_init();
> -
> -	if (of_machine_is_compatible("seagate,goflexnet"))
> -		goflexnet_init();
> -
>  	if (of_machine_is_compatible("buffalo,lsxl"))
>  		lsxl_init();
>  
> -	if (of_machine_is_compatible("iom,ix2-200"))
> -		iomega_ix2_200_init();
> -
> -	if (of_machine_is_compatible("keymile,km_kirkwood"))
> -		km_kirkwood_init();
> -
> -	if (of_machine_is_compatible("lacie,cloudbox") ||
> -	    of_machine_is_compatible("lacie,inetspace_v2") ||
> -	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
> -	    of_machine_is_compatible("lacie,netspace_max_v2") ||
> -	    of_machine_is_compatible("lacie,netspace_mini_v2") ||
> -	    of_machine_is_compatible("lacie,netspace_v2"))
> -		ns2_init();
> -
>  	if (of_machine_is_compatible("mpl,cec4"))
>  		mplcec4_init();
>  
>  	if (of_machine_is_compatible("netgear,readynas-duo-v2"))
>  		netgear_readynas_init();
>  
> -	if (of_machine_is_compatible("plathome,openblocks-a6"))
> -		openblocks_a6_init();
> -
> -	if (of_machine_is_compatible("usi,topkick"))
> -		usi_topkick_init();
> -
>  	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
>  }

We still have:

static const char * const kirkwood_dt_board_compat[] = {
	"globalscale,dreamplug",
	"globalscale,guruplug",
	"dlink,dns-320",
	"dlink,dns-325",
	"iom,iconnect",
	"raidsonic,ib-nas62x0",
	"qnap,ts219",
	"seagate,dockstar",
	"seagate,goflexnet",
	"buffalo,lsxl",
	"iom,ix2-200",
	"keymile,km_kirkwood",
	"lacie,cloudbox",
	"lacie,inetspace_v2",
	"lacie,netspace_lite_v2",
	"lacie,netspace_max_v2",
	"lacie,netspace_mini_v2",
	"lacie,netspace_v2",
	"mpl,cec4",
	"netgear,readynas-duo-v2",
	"plathome,openblocks-a6",
	"usi,topkick",
	"zyxel,nsa310",
	NULL
};

in that file. I think it does not make sense that we need to list
boards here that can be described fully by DT. When adding such a
board in the future, you will still need to adapt board-dt.c.

Should we remove the boards that you removed above here as well and
add

	"marvell,kirkwood-88f6192",
	"marvell,kirkwood-88f6281",
	"marvell,kirkwood-88f6282",
	"marvell,kirkwood-88f6283",
	"marvell,kirkwood-88f6702",
	"marvell,kirkwood-98DX4122",

or even just state "marvell,kirkwood"?

- Simon
Sebastian Hesselbarth - May 22, 2013, 8:55 p.m.
On 05/22/2013 10:36 PM, Simon Baatz wrote:
> Hi Sebastian,
>
> On Tue, May 21, 2013 at 06:41:49PM +0200, Sebastian Hesselbarth wrote:
>> With DT support for mv643xx_eth, board specific init for some boards now
>> is unneccessary. Remove those board files, Kconfig entries, and
>> corresponding entries in kirkwood_defconfig.
>>
>> Signed-off-by: Sebastian Hesselbarth<sebastian.hesselbarth@gmail.com>
>> ---
>> Note: board-km_kirkwood.c is also removed, as Valentin Longchamp confirmed
>> the lock-up is not caused by accessing clock gating registers but rather
>> non-existent device registers. This will be addressed by dtsi separation
>> for kirkwood and bobcat SoC variants.
>>
>> Changelog:
>> v3->v4:
>> - remove more boards that don't require board specific setup
>>
...
> We still have:
>
> static const char * const kirkwood_dt_board_compat[] = {
> 	"globalscale,dreamplug",
> 	"globalscale,guruplug",
> 	"dlink,dns-320",
> 	"dlink,dns-325",
> 	"iom,iconnect",
> 	"raidsonic,ib-nas62x0",
> 	"qnap,ts219",
> 	"seagate,dockstar",
> 	"seagate,goflexnet",
> 	"buffalo,lsxl",
> 	"iom,ix2-200",
> 	"keymile,km_kirkwood",
> 	"lacie,cloudbox",
> 	"lacie,inetspace_v2",
> 	"lacie,netspace_lite_v2",
> 	"lacie,netspace_max_v2",
> 	"lacie,netspace_mini_v2",
> 	"lacie,netspace_v2",
> 	"mpl,cec4",
> 	"netgear,readynas-duo-v2",
> 	"plathome,openblocks-a6",
> 	"usi,topkick",
> 	"zyxel,nsa310",
> 	NULL
> };
>
> in that file. I think it does not make sense that we need to list
> boards here that can be described fully by DT. When adding such a
> board in the future, you will still need to adapt board-dt.c.

True, will remove the redundant compatible strings for v5.
Actually, if I am not missing something, all compatible strings except
"marvell,kirkwood" are redundant as long as board.dts append it
correctly.

> Should we remove the boards that you removed above here as well and
> add
>
> 	"marvell,kirkwood-88f6192",
> 	"marvell,kirkwood-88f6281",
> 	"marvell,kirkwood-88f6282",
> 	"marvell,kirkwood-88f6283",
> 	"marvell,kirkwood-88f6702",
> 	"marvell,kirkwood-98DX4122",
>
> or even just state "marvell,kirkwood"?

I would stick with "marvell,kirkwood" only. This is SoC init code and
we do not distinguish variants here at all.

Sebastian
Jason - May 22, 2013, 9:02 p.m.
On Wed, May 22, 2013 at 10:55:43PM +0200, Sebastian Hesselbarth wrote:
> On 05/22/2013 10:36 PM, Simon Baatz wrote:
> >Hi Sebastian,
> >
> >On Tue, May 21, 2013 at 06:41:49PM +0200, Sebastian Hesselbarth wrote:
> >>With DT support for mv643xx_eth, board specific init for some boards now
> >>is unneccessary. Remove those board files, Kconfig entries, and
> >>corresponding entries in kirkwood_defconfig.
> >>
> >>Signed-off-by: Sebastian Hesselbarth<sebastian.hesselbarth@gmail.com>
> >>---
> >>Note: board-km_kirkwood.c is also removed, as Valentin Longchamp confirmed
> >>the lock-up is not caused by accessing clock gating registers but rather
> >>non-existent device registers. This will be addressed by dtsi separation
> >>for kirkwood and bobcat SoC variants.
> >>
> >>Changelog:
> >>v3->v4:
> >>- remove more boards that don't require board specific setup
> >>
> ...
> >We still have:
> >
> >static const char * const kirkwood_dt_board_compat[] = {
> >	"globalscale,dreamplug",
> >	"globalscale,guruplug",
> >	"dlink,dns-320",
> >	"dlink,dns-325",
> >	"iom,iconnect",
> >	"raidsonic,ib-nas62x0",
> >	"qnap,ts219",
> >	"seagate,dockstar",
> >	"seagate,goflexnet",
> >	"buffalo,lsxl",
> >	"iom,ix2-200",
> >	"keymile,km_kirkwood",
> >	"lacie,cloudbox",
> >	"lacie,inetspace_v2",
> >	"lacie,netspace_lite_v2",
> >	"lacie,netspace_max_v2",
> >	"lacie,netspace_mini_v2",
> >	"lacie,netspace_v2",
> >	"mpl,cec4",
> >	"netgear,readynas-duo-v2",
> >	"plathome,openblocks-a6",
> >	"usi,topkick",
> >	"zyxel,nsa310",
> >	NULL
> >};
> >
> >in that file. I think it does not make sense that we need to list
> >boards here that can be described fully by DT. When adding such a
> >board in the future, you will still need to adapt board-dt.c.
> 
> True, will remove the redundant compatible strings for v5.
> Actually, if I am not missing something, all compatible strings except
> "marvell,kirkwood" are redundant as long as board.dts append it
> correctly.
> 
> >Should we remove the boards that you removed above here as well and
> >add
> >
> >	"marvell,kirkwood-88f6192",
> >	"marvell,kirkwood-88f6281",
> >	"marvell,kirkwood-88f6282",
> >	"marvell,kirkwood-88f6283",
> >	"marvell,kirkwood-88f6702",
> >	"marvell,kirkwood-98DX4122",
> >
> >or even just state "marvell,kirkwood"?
> 
> I would stick with "marvell,kirkwood" only. This is SoC init code and
> we do not distinguish variants here at all.

Agreed, nice catch Simon.

thx,

Jason.
Sebastian Hesselbarth - May 22, 2013, 9:17 p.m.
On 05/22/2013 11:02 PM, Jason Cooper wrote:
> On Wed, May 22, 2013 at 10:55:43PM +0200, Sebastian Hesselbarth wrote:
>> On 05/22/2013 10:36 PM, Simon Baatz wrote:
>>> Hi Sebastian,
>>>
>>> On Tue, May 21, 2013 at 06:41:49PM +0200, Sebastian Hesselbarth wrote:
>>>> With DT support for mv643xx_eth, board specific init for some boards now
>>>> is unneccessary. Remove those board files, Kconfig entries, and
>>>> corresponding entries in kirkwood_defconfig.
>>>>
>>>> Signed-off-by: Sebastian Hesselbarth<sebastian.hesselbarth@gmail.com>
>>>> ---
>>>> Note: board-km_kirkwood.c is also removed, as Valentin Longchamp confirmed
>>>> the lock-up is not caused by accessing clock gating registers but rather
>>>> non-existent device registers. This will be addressed by dtsi separation
>>>> for kirkwood and bobcat SoC variants.
>>>>
>>>> Changelog:
>>>> v3->v4:
>>>> - remove more boards that don't require board specific setup
>>>>
>> ...
>>
>> I would stick with "marvell,kirkwood" only. This is SoC init code and
>> we do not distinguish variants here at all.
>
> Agreed, nice catch Simon.

I just confirmed all kirkwood dts/dtsi properly set "marvell,kirkwood"
in their compatible strings. Will remove all other comapatible strings
from mach-kirkwood/board-dt.c as Simon suggested for v5.

Sebastian

Patch

diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index a1d8252..540ca51 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -30,27 +30,11 @@  CONFIG_MACH_SHEEVAPLUG=y
 CONFIG_MACH_T5325=y
 CONFIG_MACH_TS219=y
 CONFIG_MACH_TS41X=y
-CONFIG_MACH_CLOUDBOX_DT=y
 CONFIG_MACH_DLINK_KIRKWOOD_DT=y
-CONFIG_MACH_DOCKSTAR_DT=y
-CONFIG_MACH_DREAMPLUG_DT=y
-CONFIG_MACH_GOFLEXNET_DT=y
-CONFIG_MACH_GURUPLUG_DT=y
-CONFIG_MACH_IB62X0_DT=y
-CONFIG_MACH_ICONNECT_DT=y
-CONFIG_MACH_INETSPACE_V2_DT=y
-CONFIG_MACH_IOMEGA_IX2_200_DT=y
-CONFIG_MACH_KM_KIRKWOOD_DT=y
 CONFIG_MACH_LSXL_DT=y
 CONFIG_MACH_MPLCEC4_DT=y
-CONFIG_MACH_NETSPACE_LITE_V2_DT=y
-CONFIG_MACH_NETSPACE_MAX_V2_DT=y
-CONFIG_MACH_NETSPACE_MINI_V2_DT=y
-CONFIG_MACH_NETSPACE_V2_DT=y
 CONFIG_MACH_NSA310_DT=y
-CONFIG_MACH_OPENBLOCKS_A6_DT=y
 CONFIG_MACH_READYNAS_DT=y
-CONFIG_MACH_TOPKICK_DT=y
 CONFIG_MACH_TS219_DT=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_PREEMPT=y
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 7509a89..c2fd30b 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -146,13 +146,6 @@  config ARCH_KIRKWOOD_DT
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell Kirkwood using flattened device tree.
 
-config MACH_CLOUDBOX_DT
-	bool "LaCie CloudBox NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  CloudBox NAS, using Flattened Device Tree.
-
 config MACH_DLINK_KIRKWOOD_DT
 	bool "D-Link Kirkwood-based NAS (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -161,69 +154,6 @@  config MACH_DLINK_KIRKWOOD_DT
 	  Kirkwood-based D-Link NASes such as DNS-320 & DNS-325,
 	  using Flattened Device Tree.
 
-config MACH_DOCKSTAR_DT
-	bool "Seagate FreeAgent Dockstar (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate FreeAgent Dockstar (Flattened Device Tree).
-
-config MACH_DREAMPLUG_DT
-	bool "Marvell DreamPlug (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell DreamPlug (Flattened Device Tree).
-
-config MACH_GOFLEXNET_DT
-	bool "Seagate GoFlex Net (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Seagate GoFlex Net (Flattened Device Tree).
-
-config MACH_GURUPLUG_DT
-	bool "Marvell GuruPlug Reference Board (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Marvell GuruPlug Reference Board (Flattened Device Tree).
-
-config MACH_IB62X0_DT
-	bool "RaidSonic IB-NAS6210, IB-NAS6220 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  RaidSonic IB-NAS6210 & IB-NAS6220 devices, using
-	  Flattened Device Tree.
-
-config MACH_ICONNECT_DT
-	bool "Iomega Iconnect (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here to enable Iomega Iconnect support.
-
-config MACH_INETSPACE_V2_DT
-	bool "LaCie Internet Space v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Internet Space v2 NAS, using Flattened Device Tree.
-
-config MACH_IOMEGA_IX2_200_DT
-	bool "Iomega StorCenter ix2-200 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Iomega StorCenter ix2-200 (Flattened Device Tree).
-
-config MACH_KM_KIRKWOOD_DT
-	bool "Keymile Kirkwood Reference Design (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Keymile Kirkwood Reference Desgin, using Flattened Device Tree.
-
 config MACH_LSXL_DT
 	bool "Buffalo Linkstation LS-XHL, LS-CHLv2 (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -239,39 +169,6 @@  config MACH_MPLCEC4_DT
 	  Say 'Y' here if you want your kernel to support the
 	  MPL CEC4 (Flattened Device Tree).
 
-config MACH_NETSPACE_LITE_V2_DT
-	bool "LaCie Network Space Lite v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Lite v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MAX_V2_DT
-	bool "LaCie Network Space Max v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Max v2 NAS, using Flattened Device Tree.
-
-config MACH_NETSPACE_MINI_V2_DT
-	bool "LaCie Network Space Mini v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space Mini v2 NAS using Flattened Device Tree.
-
-	  This board is embedded in a product named CloudBox, which
-	  provides automatic backup on a 100GB cloud storage. This
-	  should not confused with a more recent LaCie NAS also named
-	  CloudBox. For this last, the disk capacity is 1TB or above.
-
-config MACH_NETSPACE_V2_DT
-	bool "LaCie Network Space v2 NAS (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the LaCie
-	  Network Space v2 NAS, using Flattened Device Tree.
-
 config MACH_NSA310_DT
 	bool "ZyXEL NSA-310 (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -280,13 +177,6 @@  config MACH_NSA310_DT
 	  Say 'Y' here if you want your kernel to support the
 	  ZyXEL NSA-310 board (Flattened Device Tree).
 
-config MACH_OPENBLOCKS_A6_DT
-	bool "Plat'Home OpenBlocks A6 (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  Plat'Home OpenBlocks A6 (Flattened Device Tree).
-
 config MACH_READYNAS_DT
 	bool "NETGEAR ReadyNAS Duo v2 (Flattened Device Tree)"
 	select ARCH_KIRKWOOD_DT
@@ -296,13 +186,6 @@  config MACH_READYNAS_DT
 	  Say 'Y' here if you want your kernel to support the
 	  NETGEAR ReadyNAS Duo v2 using Fattened Device Tree.
 
-config MACH_TOPKICK_DT
-	bool "USI Topkick (Flattened Device Tree)"
-	select ARCH_KIRKWOOD_DT
-	help
-	  Say 'Y' here if you want your kernel to support the
-	  USI Topkick, using Flattened Device Tree
-
 config MACH_TS219_DT
 	bool "Device Tree for QNAP TS-11X, TS-21X NAS"
 	select ARCH_KIRKWOOD_DT
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index e1f3735..8e7fa4f 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -20,25 +20,9 @@  obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 
 obj-$(CONFIG_ARCH_KIRKWOOD_DT)		+= board-dt.o
-obj-$(CONFIG_MACH_CLOUDBOX_DT)		+= board-ns2.o
 obj-$(CONFIG_MACH_DLINK_KIRKWOOD_DT)	+= board-dnskw.o
-obj-$(CONFIG_MACH_DOCKSTAR_DT)		+= board-dockstar.o
-obj-$(CONFIG_MACH_DREAMPLUG_DT)		+= board-dreamplug.o
-obj-$(CONFIG_MACH_GOFLEXNET_DT)		+= board-goflexnet.o
-obj-$(CONFIG_MACH_GURUPLUG_DT)		+= board-guruplug.o
-obj-$(CONFIG_MACH_IB62X0_DT)		+= board-ib62x0.o
-obj-$(CONFIG_MACH_ICONNECT_DT)		+= board-iconnect.o
-obj-$(CONFIG_MACH_INETSPACE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_IOMEGA_IX2_200_DT)	+= board-iomega_ix2_200.o
-obj-$(CONFIG_MACH_KM_KIRKWOOD_DT)	+= board-km_kirkwood.o
 obj-$(CONFIG_MACH_LSXL_DT)		+= board-lsxl.o
 obj-$(CONFIG_MACH_MPLCEC4_DT)		+= board-mplcec4.o
-obj-$(CONFIG_MACH_NETSPACE_LITE_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MAX_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_MINI_V2_DT)	+= board-ns2.o
-obj-$(CONFIG_MACH_NETSPACE_V2_DT)	+= board-ns2.o
 obj-$(CONFIG_MACH_NSA310_DT)		+= board-nsa310.o
-obj-$(CONFIG_MACH_OPENBLOCKS_A6_DT)	+= board-openblocks_a6.o
 obj-$(CONFIG_MACH_READYNAS_DT)		+= board-readynas.o
-obj-$(CONFIG_MACH_TOPKICK_DT)		+= board-usi_topkick.o
 obj-$(CONFIG_MACH_TS219_DT)		+= board-ts219.o tsx1x-common.o
diff --git a/arch/arm/mach-kirkwood/board-dnskw.c b/arch/arm/mach-kirkwood/board-dnskw.c
index a1aa87f..2af7a95 100644
--- a/arch/arm/mach-kirkwood/board-dnskw.c
+++ b/arch/arm/mach-kirkwood/board-dnskw.c
@@ -14,14 +14,9 @@ 
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
 #include "common.h"
 
-static struct mv643xx_eth_platform_data dnskw_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
 /* Register any GPIO for output and set the value */
 static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
 {
@@ -36,8 +31,6 @@  static void __init dnskw_gpio_register(unsigned gpio, char *name, int def)
 
 void __init dnskw_init(void)
 {
-	kirkwood_ge00_init(&dnskw_ge00_data);
-
 	/* Set NAS to turn back on after a power failure */
 	dnskw_gpio_register(37, "dnskw:power:recover", 1);
 }
diff --git a/arch/arm/mach-kirkwood/board-dockstar.c b/arch/arm/mach-kirkwood/board-dockstar.c
deleted file mode 100644
index d7196db..0000000
--- a/arch/arm/mach-kirkwood/board-dockstar.c
+++ /dev/null
@@ -1,32 +0,0 @@ 
-/*
- * arch/arm/mach-kirkwood/board-dockstar.c
- *
- * Seagate FreeAgent Dockstar Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dockstar_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init dockstar_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&dockstar_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-dreamplug.c b/arch/arm/mach-kirkwood/board-dreamplug.c
deleted file mode 100644
index 0903242..0000000
--- a/arch/arm/mach-kirkwood/board-dreamplug.c
+++ /dev/null
@@ -1,35 +0,0 @@ 
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-dreamplug.c
- *
- * Marvell DreamPlug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init dreamplug_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&dreamplug_ge00_data);
-	kirkwood_ge01_init(&dreamplug_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-dt.c b/arch/arm/mach-kirkwood/board-dt.c
index 8db388a..a86b41c 100644
--- a/arch/arm/mach-kirkwood/board-dt.c
+++ b/arch/arm/mach-kirkwood/board-dt.c
@@ -104,59 +104,21 @@  static void __init kirkwood_dt_init(void)
 	kexec_reinit = kirkwood_enable_pcie;
 #endif
 
-	if (of_machine_is_compatible("globalscale,dreamplug"))
-		dreamplug_init();
-
-	if (of_machine_is_compatible("globalscale,guruplug"))
-		guruplug_dt_init();
-
 	if (of_machine_is_compatible("dlink,dns-kirkwood"))
 		dnskw_init();
 
-	if (of_machine_is_compatible("iom,iconnect"))
-		iconnect_init();
-
-	if (of_machine_is_compatible("raidsonic,ib-nas62x0"))
-		ib62x0_init();
-
 	if (of_machine_is_compatible("qnap,ts219"))
 		qnap_dt_ts219_init();
 
-	if (of_machine_is_compatible("seagate,dockstar"))
-		dockstar_dt_init();
-
-	if (of_machine_is_compatible("seagate,goflexnet"))
-		goflexnet_init();
-
 	if (of_machine_is_compatible("buffalo,lsxl"))
 		lsxl_init();
 
-	if (of_machine_is_compatible("iom,ix2-200"))
-		iomega_ix2_200_init();
-
-	if (of_machine_is_compatible("keymile,km_kirkwood"))
-		km_kirkwood_init();
-
-	if (of_machine_is_compatible("lacie,cloudbox") ||
-	    of_machine_is_compatible("lacie,inetspace_v2") ||
-	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
-	    of_machine_is_compatible("lacie,netspace_max_v2") ||
-	    of_machine_is_compatible("lacie,netspace_mini_v2") ||
-	    of_machine_is_compatible("lacie,netspace_v2"))
-		ns2_init();
-
 	if (of_machine_is_compatible("mpl,cec4"))
 		mplcec4_init();
 
 	if (of_machine_is_compatible("netgear,readynas-duo-v2"))
 		netgear_readynas_init();
 
-	if (of_machine_is_compatible("plathome,openblocks-a6"))
-		openblocks_a6_init();
-
-	if (of_machine_is_compatible("usi,topkick"))
-		usi_topkick_init();
-
 	of_platform_populate(NULL, kirkwood_dt_match_table, NULL, NULL);
 }
 
diff --git a/arch/arm/mach-kirkwood/board-goflexnet.c b/arch/arm/mach-kirkwood/board-goflexnet.c
deleted file mode 100644
index 9db979a..0000000
--- a/arch/arm/mach-kirkwood/board-goflexnet.c
+++ /dev/null
@@ -1,34 +0,0 @@ 
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-goflexnet.c
- *
- * Seagate GoFlext Net Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- *
- * Copied and modified for Seagate GoFlex Net support by
- * Joshua Coombs <josh.coombs@gmail.com> based on ArchLinux ARM's
- * GoFlex kernel patches.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data goflexnet_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init goflexnet_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&goflexnet_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-guruplug.c b/arch/arm/mach-kirkwood/board-guruplug.c
deleted file mode 100644
index a857163..0000000
--- a/arch/arm/mach-kirkwood/board-guruplug.c
+++ /dev/null
@@ -1,33 +0,0 @@ 
-/*
- * arch/arm/mach-kirkwood/board-guruplug.c
- *
- * Marvell Guruplug Reference Board Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data guruplug_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data guruplug_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-void __init guruplug_dt_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&guruplug_ge00_data);
-	kirkwood_ge01_init(&guruplug_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c
deleted file mode 100644
index 9a857ae..0000000
--- a/arch/arm/mach-kirkwood/board-ib62x0.c
+++ /dev/null
@@ -1,29 +0,0 @@ 
-/*
- * Copyright 2012 (C), Simon Baatz <gmbnomis@gmail.com>
- *
- * arch/arm/mach-kirkwood/board-ib62x0.c
- *
- * RaidSonic ICY BOX IB-NAS6210 & IB-NAS6220 init for drivers not
- * converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ib62x0_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ib62x0_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&ib62x0_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c
index c8ebde4..fcaf136 100644
--- a/arch/arm/mach-kirkwood/board-iconnect.c
+++ b/arch/arm/mach-kirkwood/board-iconnect.c
@@ -11,18 +11,8 @@ 
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/of.h>
-#include <linux/mv643xx_eth.h>
 #include "common.h"
 
-static struct mv643xx_eth_platform_data iconnect_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iconnect_init(void)
-{
-	kirkwood_ge00_init(&iconnect_ge00_data);
-}
-
 static int __init iconnect_pci_init(void)
 {
 	if (of_machine_is_compatible("iom,iconnect"))
diff --git a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c b/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
deleted file mode 100644
index e5f7041..0000000
--- a/arch/arm/mach-kirkwood/board-iomega_ix2_200.c
+++ /dev/null
@@ -1,34 +0,0 @@ 
-/*
- * arch/arm/mach-kirkwood/board-iomega_ix2_200.c
- *
- * Iomega StorCenter ix2-200
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/ethtool.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
-	.phy_addr       = MV643XX_ETH_PHY_NONE,
-	.speed          = SPEED_1000,
-	.duplex         = DUPLEX_FULL,
-};
-
-static struct mv643xx_eth_platform_data iomega_ix2_200_ge01_data = {
-        .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
-};
-
-void __init iomega_ix2_200_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&iomega_ix2_200_ge00_data);
-	kirkwood_ge01_init(&iomega_ix2_200_ge01_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-km_kirkwood.c b/arch/arm/mach-kirkwood/board-km_kirkwood.c
deleted file mode 100644
index 44e4605..0000000
--- a/arch/arm/mach-kirkwood/board-km_kirkwood.c
+++ /dev/null
@@ -1,44 +0,0 @@ 
-/*
- * Copyright 2012 2012 KEYMILE AG, CH-3097 Bern
- * Valentin Longchamp <valentin.longchamp@keymile.com>
- *
- * arch/arm/mach-kirkwood/board-km_kirkwood.c
- *
- * Keymile km_kirkwood Reference Desing Init for drivers not converted to
- * flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/clk.h>
-#include <linux/clk-private.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data km_kirkwood_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init km_kirkwood_init(void)
-{
-	struct clk *sata_clk;
-	/*
-	 * Our variant of kirkwood (integrated in the Bobcat) hangs on accessing
-	 * SATA bits (14-15) of the Clock Gating Control Register. Since these
-	 * devices are also not present in this variant, their clocks get
-	 * disabled because unused when clk_disable_unused() gets called.
-	 * That's why we change the flags to these clocks to CLK_IGNORE_UNUSED
-	 */
-	sata_clk = clk_get_sys("sata_mv.0", "0");
-	if (!IS_ERR(sata_clk))
-		sata_clk->flags |= CLK_IGNORE_UNUSED;
-	sata_clk = clk_get_sys("sata_mv.0", "1");
-	if (!IS_ERR(sata_clk))
-		sata_clk->flags |= CLK_IGNORE_UNUSED;
-
-	kirkwood_ge00_init(&km_kirkwood_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-lsxl.c b/arch/arm/mach-kirkwood/board-lsxl.c
index 4ec8b7a..3dc0929 100644
--- a/arch/arm/mach-kirkwood/board-lsxl.c
+++ b/arch/arm/mach-kirkwood/board-lsxl.c
@@ -14,17 +14,8 @@ 
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
 #include "common.h"
 
-static struct mv643xx_eth_platform_data lsxl_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-static struct mv643xx_eth_platform_data lsxl_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
 /*
  * On the LS-XHL/LS-CHLv2, the shutdown process is following:
  * - Userland monitors key events until the power switch goes to off position
@@ -40,13 +31,6 @@  static void lsxl_power_off(void)
 
 void __init lsxl_init(void)
 {
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-
-	kirkwood_ge00_init(&lsxl_ge00_data);
-	kirkwood_ge01_init(&lsxl_ge01_data);
-
 	/* register power-off method */
 	pm_power_off = lsxl_power_off;
 }
diff --git a/arch/arm/mach-kirkwood/board-mplcec4.c b/arch/arm/mach-kirkwood/board-mplcec4.c
index 7d6dc66..dd1f655 100644
--- a/arch/arm/mach-kirkwood/board-mplcec4.c
+++ b/arch/arm/mach-kirkwood/board-mplcec4.c
@@ -11,24 +11,10 @@ 
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/mv643xx_eth.h>
 #include "common.h"
 
-static struct mv643xx_eth_platform_data mplcec4_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(1),
-};
-
-static struct mv643xx_eth_platform_data mplcec4_ge01_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(2),
-};
-
 void __init mplcec4_init(void)
 {
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&mplcec4_ge00_data);
-	kirkwood_ge01_init(&mplcec4_ge01_data);
 	kirkwood_pcie_init(KW_PCIE0);
 }
 
diff --git a/arch/arm/mach-kirkwood/board-ns2.c b/arch/arm/mach-kirkwood/board-ns2.c
deleted file mode 100644
index f8f6605..0000000
--- a/arch/arm/mach-kirkwood/board-ns2.c
+++ /dev/null
@@ -1,35 +0,0 @@ 
-/*
- * Copyright 2012 (C), Simon Guinot <simon.guinot@sequanux.org>
- *
- * arch/arm/mach-kirkwood/board-ns2.c
- *
- * LaCie Network Space v2 board (and parents) initialization for drivers
- * not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/of.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data ns2_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
-void __init ns2_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	if (of_machine_is_compatible("lacie,cloudbox") ||
-	    of_machine_is_compatible("lacie,netspace_lite_v2") ||
-	    of_machine_is_compatible("lacie,netspace_mini_v2"))
-		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-	kirkwood_ge00_init(&ns2_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-openblocks_a6.c b/arch/arm/mach-kirkwood/board-openblocks_a6.c
deleted file mode 100644
index b11d8fd..0000000
--- a/arch/arm/mach-kirkwood/board-openblocks_a6.c
+++ /dev/null
@@ -1,26 +0,0 @@ 
-/*
- * Copyright 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- *
- * arch/arm/mach-kirkwood/board-openblocks_a6.c
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data openblocks_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init openblocks_a6_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&openblocks_ge00_data);
-}
diff --git a/arch/arm/mach-kirkwood/board-readynas.c b/arch/arm/mach-kirkwood/board-readynas.c
index fb42c20..3ab3e0e 100644
--- a/arch/arm/mach-kirkwood/board-readynas.c
+++ b/arch/arm/mach-kirkwood/board-readynas.c
@@ -13,16 +13,10 @@ 
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
 #include <mach/kirkwood.h>
 #include "common.h"
 
-static struct mv643xx_eth_platform_data netgear_readynas_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
 void __init netgear_readynas_init(void)
 {
-	kirkwood_ge00_init(&netgear_readynas_ge00_data);
 	kirkwood_pcie_init(KW_PCIE0);
 }
diff --git a/arch/arm/mach-kirkwood/board-ts219.c b/arch/arm/mach-kirkwood/board-ts219.c
index acb0187..854d448 100644
--- a/arch/arm/mach-kirkwood/board-ts219.c
+++ b/arch/arm/mach-kirkwood/board-ts219.c
@@ -18,27 +18,14 @@ 
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mv643xx_eth.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
 #include "tsx1x-common.h"
 
-static struct mv643xx_eth_platform_data qnap_ts219_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
-};
-
 void __init qnap_dt_ts219_init(void)
 {
-	u32 dev, rev;
-
-	kirkwood_pcie_id(&dev, &rev);
-	if (dev == MV88F6282_DEV_ID)
-		qnap_ts219_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);
-
-	kirkwood_ge00_init(&qnap_ts219_ge00_data);
-
 	pm_power_off = qnap_tsx1x_power_off;
 }
 
diff --git a/arch/arm/mach-kirkwood/board-usi_topkick.c b/arch/arm/mach-kirkwood/board-usi_topkick.c
deleted file mode 100644
index 1cc04ec..0000000
--- a/arch/arm/mach-kirkwood/board-usi_topkick.c
+++ /dev/null
@@ -1,29 +0,0 @@ 
-/*
- * Copyright 2012 (C), Jason Cooper <jason@lakedaemon.net>
- *
- * arch/arm/mach-kirkwood/board-usi_topkick.c
- *
- * USI Topkick Init for drivers not converted to flattened device tree yet.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mv643xx_eth.h>
-#include <linux/gpio.h>
-#include "common.h"
-
-static struct mv643xx_eth_platform_data topkick_ge00_data = {
-	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
-};
-
-void __init usi_topkick_init(void)
-{
-	/*
-	 * Basic setup. Needs to be called early.
-	 */
-	kirkwood_ge00_init(&topkick_ge00_data);
-}