diff mbox

[U-Boot,v3] Makefile: move the common makefile line to public area

Message ID 1368782077-8425-1-git-send-email-ying.zhang@freescale.com
State Changes Requested
Delegated to: Tom Rini
Headers show

Commit Message

ying.zhang@freescale.com May 17, 2013, 9:14 a.m. UTC 
From: Ying Zhang <b40530@freescale.com>

Move the common makefile line shared by the SPL and non-SPL to the public area,
so that we can avoid excessive SPL symbols. Some of them will be used by the
SPL later.

This patch is on top of the patch "common/Makefile: Add new symbol
CONFIG_SPL_ENV_SUPPORT for environment in SPL".

Signed-off-by: Ying Zhang <b40530@freescale.com>
---
Compared with the previous version, resume CONFIG_ENV_IS_IN.. section
to private area for non-SPL.

 common/Makefile |   17 +++++++++--------
 lib/Makefile    |   14 ++++----------
 2 files changed, 13 insertions(+), 18 deletions(-)
diff mbox

Patch

diff --git a/common/Makefile b/common/Makefile
index 26b8495..0d72da5 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -188,14 +188,6 @@  COBJS-$(CONFIG_CMD_ZIP) += cmd_zip.o
 COBJS-$(CONFIG_CMD_ZFS) += cmd_zfs.o
 
 # others
-ifdef CONFIG_DDR_SPD
-SPD := y
-endif
-ifdef CONFIG_SPD_EEPROM
-SPD := y
-endif
-COBJS-$(SPD) += ddr_spd.o
-COBJS-$(CONFIG_HWCONFIG) += hwconfig.o
 COBJS-$(CONFIG_BOOTSTAGE) += bootstage.o
 COBJS-$(CONFIG_CONSOLE_MUX) += iomux.o
 COBJS-y += flash.o
@@ -234,6 +226,15 @@  endif
 COBJS-y += cmd_nvedit.o
 #environment
 COBJS-y += env_common.o
+#others
+ifdef CONFIG_DDR_SPD
+SPD := y
+endif
+ifdef CONFIG_SPD_EEPROM
+SPD := y
+endif
+COBJS-$(SPD) += ddr_spd.o
+COBJS-$(CONFIG_HWCONFIG) += hwconfig.o
 COBJS-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
 COBJS-y += console.o
 COBJS-y += dlmalloc.o
diff --git a/lib/Makefile b/lib/Makefile
index 8f81862..dad057f 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -26,7 +26,6 @@  include $(TOPDIR)/config.mk
 LIB	= $(obj)libgeneric.o
 
 ifndef CONFIG_SPL_BUILD
-COBJS-$(CONFIG_ADDR_MAP) += addr_map.o
 COBJS-$(CONFIG_AES) += aes.o
 COBJS-$(CONFIG_BZIP2) += bzlib.o
 COBJS-$(CONFIG_BZIP2) += bzlib_crctable.o
@@ -36,13 +35,10 @@  COBJS-$(CONFIG_BZIP2) += bzlib_huffman.o
 COBJS-$(CONFIG_USB_TTY) += circbuf.o
 COBJS-y += crc7.o
 COBJS-y += crc16.o
-COBJS-y += display_options.o
-COBJS-y += errno.o
 COBJS-$(CONFIG_OF_CONTROL) += fdtdec.o
 COBJS-$(CONFIG_TEST_FDTDEC) += fdtdec_test.o
 COBJS-$(CONFIG_GZIP) += gunzip.o
 COBJS-$(CONFIG_GZIP_COMPRESSED) += gzip.o
-COBJS-y += hashtable.o
 COBJS-y += initcall.o
 COBJS-$(CONFIG_LMB) += lmb.o
 COBJS-y += ldiv.o
@@ -59,14 +55,12 @@  endif
 
 ifdef CONFIG_SPL_BUILD
 COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += crc32.o
-ifneq ($(CONFIG_SPL_SPI_FLASH_SUPPORT)$(CONFIG_SPL_NET_SUPPORT),)
-COBJS-y += display_options.o
-endif
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += errno.o
-COBJS-$(CONFIG_SPL_NET_SUPPORT) += hashtable.o
 COBJS-$(CONFIG_SPL_NET_SUPPORT) += net_utils.o
 endif
+COBJS-$(CONFIG_ADDR_MAP) += addr_map.o
+COBJS-y += hashtable.o
+COBJS-y += errno.o
+COBJS-y += display_options.o
 COBJS-$(CONFIG_BCH) += bch.o
 COBJS-y += crc32.o
 COBJS-y += ctype.o