Patchwork [3/3] zedboard: add Avnet Zedboard support.

login
register
mail settings
Submitter Bornet Romain
Date May 17, 2013, 9:32 a.m.
Message ID <A9B38C44323C2B48A280336ED55F3F643D0E8FFE@EINTMBX01.einet.ad.eivd.ch>
Download mbox | patch
Permalink /patch/244587/
State Not Applicable
Headers show

Comments

Bornet Romain - May 17, 2013, 9:32 a.m.
Hi,

Rather new in buildroot but already fond of it. 
As a Zedboard user I would really appreciate to have this patch merged in BR mainline.

Good job!

-----Original Message-----
From: buildroot-bounces@busybox.net [mailto:buildroot-bounces@busybox.net] On Behalf Of Spenser Gilliland
Sent: jeudi 16 mai 2013 01:12
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 3/3] zedboard: add Avnet Zedboard support.

add defconfig and board dir for Avnet Zedboard

Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
---
 board/avnet/zedboard/readme.txt |   13 +++++++++++++
 configs/zedboard_defconfig      |   21 +++++++++++++++++++++
 2 files changed, 34 insertions(+)
 create mode 100644 board/avnet/zedboard/readme.txt
 create mode 100644 configs/zedboard_defconfig

Patch

diff --git a/board/avnet/zedboard/readme.txt b/board/avnet/zedboard/readme.txt
new file mode 100644
index 0000000..eaa2cb8
--- /dev/null
+++ b/board/avnet/zedboard/readme.txt
@@ -0,0 +1,13 @@ 
+This is the buildroot board support for the Avnet Zedboard. The Zedboard is
+a development board based on the Xilinx Zynq-7000 based All-Programmable 
+System-On-Chip.
+
+Zedboard information including schematics, reference designs, and manuals are
+available from http://www.zedboard.org .
+
+To boot the Zedboard using a buildroot generated image copy the following files
+to the sdcard:
+	zynq-zed.dtb -> devicetree.dtb
+	rootfs.cpio.gz.uboot -> uramdisk.image.gz
+	uImage -> uImage
+
diff --git a/configs/zedboard_defconfig b/configs/zedboard_defconfig
new file mode 100644
index 0000000..0dfc581
--- /dev/null
+++ b/configs/zedboard_defconfig
@@ -0,0 +1,21 @@ 
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_ARM_ENABLE_NEON=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0"
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
+BR2_TARGET_ROOTFS_CPIO_GZIP=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="zynq_zed"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://github.com/Xilinx/u-boot-xlnx.git"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="xilinx-v14.5"
+BR2_TARGET_UBOOT_FORMAT_ELF=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/Xilinx/linux-xlnx.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="xilinx-v14.5"
+BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq"
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-zed"