new file mode 100644
@@ -0,0 +1,13 @@
+This is the buildroot board support for the Avnet Zedboard. The Zedboard is
+a development board based on the Xilinx Zynq-7000 based All-Programmable
+System-On-Chip.
+
+Zedboard information including schematics, reference designs, and manuals are
+available from http://www.zedboard.org .
+
+To boot the Zedboard using a buildroot generated image copy the following files
+to the sdcard:
+ zynq-zed.dtb -> devicetree.dtb
+ rootfs.cpio.gz.uboot -> uramdisk.image.gz
+ uImage -> uImage
+
new file mode 100644
@@ -0,0 +1,21 @@
+BR2_arm=y
+BR2_cortex_a9=y
+BR2_ARM_ENABLE_NEON=y
+BR2_TARGET_GENERIC_GETTY_PORT="ttyPS0"
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_CPIO_UIMAGE=y
+BR2_TARGET_ROOTFS_CPIO_GZIP=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="zynq_zed"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_GIT_REPO_URL="git://github.com/Xilinx/u-boot-xlnx.git"
+BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION="xilinx-v14.5"
+BR2_TARGET_UBOOT_FORMAT_ELF=y
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_GIT_REPO_URL="git://github.com/Xilinx/linux-xlnx.git"
+BR2_LINUX_KERNEL_CUSTOM_GIT_VERSION="xilinx-v14.5"
+BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq"
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="zynq-zed"
add defconfig and board dir for Avnet Zedboard Signed-off-by: Spenser Gilliland <spenser@gillilanding.com> --- board/avnet/zedboard/readme.txt | 13 +++++++++++++ configs/zedboard_defconfig | 21 +++++++++++++++++++++ 2 files changed, 34 insertions(+) create mode 100644 board/avnet/zedboard/readme.txt create mode 100644 configs/zedboard_defconfig