Patchwork [1/4] net-snmp: Add version 5.7.2

login
register
mail settings
Submitter christian.braunersorensen@prevas.dk
Date May 15, 2013, 7:41 a.m.
Message ID <8be52f6bb85877b0fba311d401db72f2dc2d1721.1368603585.git.christian.braunersorensen@prevas.dk>
Download mbox | patch
Permalink /patch/243917/
State Accepted
Delegated to: Esben Haabendal
Headers show

Comments

christian.braunersorensen@prevas.dk - May 15, 2013, 7:41 a.m.
From: Christian Sørensen <christian.braunersorensen@prevas.dk>

---
 recipes/net-snmp/files/init                        |  63 +++
 recipes/net-snmp/files/snmpd.conf                  | 422 +++++++++++++++++++++
 recipes/net-snmp/files/snmptrapd.conf              |  17 +
 .../net-snmp-5.7.2/.net-snmp-libnl.patch.swp       | Bin 0 -> 12288 bytes
 .../net-snmp/net-snmp-5.7.2/net-snmp-libnl.patch   |  65 ++++
 recipes/net-snmp/net-snmp.inc                      |  54 +++
 recipes/net-snmp/net-snmp_5.7.2.oe                 |   8 +
 recipes/net-snmp/net-snmp_5.7.2.oe.sig             |   1 +
 8 files changed, 630 insertions(+)
 create mode 100755 recipes/net-snmp/files/init
 create mode 100644 recipes/net-snmp/files/snmpd.conf
 create mode 100644 recipes/net-snmp/files/snmptrapd.conf
 create mode 100644 recipes/net-snmp/net-snmp-5.7.2/.net-snmp-libnl.patch.swp
 create mode 100644 recipes/net-snmp/net-snmp-5.7.2/net-snmp-libnl.patch
 create mode 100644 recipes/net-snmp/net-snmp.inc
 create mode 100644 recipes/net-snmp/net-snmp_5.7.2.oe
 create mode 100644 recipes/net-snmp/net-snmp_5.7.2.oe.sig
Esben Haabendal - May 29, 2013, 7:58 a.m.
<christian.braunersorensen@prevas.dk> writes:

> From: Christian Sørensen <christian.braunersorensen@prevas.dk>
>
> ---
>  recipes/net-snmp/files/init                        |  63 +++
>  recipes/net-snmp/files/snmpd.conf                  | 422 +++++++++++++++++++++
>  recipes/net-snmp/files/snmptrapd.conf              |  17 +
>  .../net-snmp-5.7.2/.net-snmp-libnl.patch.swp       | Bin 0 -> 12288 bytes

vim littering...

>  .../net-snmp/net-snmp-5.7.2/net-snmp-libnl.patch   |  65 ++++
>  recipes/net-snmp/net-snmp.inc                      |  54 +++
>  recipes/net-snmp/net-snmp_5.7.2.oe                 |   8 +
>  recipes/net-snmp/net-snmp_5.7.2.oe.sig             |   1 +
>  8 files changed, 630 insertions(+)
>  create mode 100755 recipes/net-snmp/files/init
>  create mode 100644 recipes/net-snmp/files/snmpd.conf
>  create mode 100644 recipes/net-snmp/files/snmptrapd.conf
>  create mode 100644 recipes/net-snmp/net-snmp-5.7.2/.net-snmp-libnl.patch.swp
>  create mode 100644 recipes/net-snmp/net-snmp-5.7.2/net-snmp-libnl.patch
>  create mode 100644 recipes/net-snmp/net-snmp.inc
>  create mode 100644 recipes/net-snmp/net-snmp_5.7.2.oe
>  create mode 100644 recipes/net-snmp/net-snmp_5.7.2.oe.sig

Merged (without vim littering) to master.

/Esben

Patch

diff --git a/recipes/net-snmp/files/init b/recipes/net-snmp/files/init
new file mode 100755
index 0000000..434b2fa
--- /dev/null
+++ b/recipes/net-snmp/files/init
@@ -0,0 +1,63 @@ 
+#! /bin/sh
+# /etc/init.d/snmpd: start snmp daemon.
+
+test -x /usr/sbin/snmpd || exit 0
+test -x /usr/sbin/snmptrapd || exit 0
+
+# Defaults
+export MIBDIRS=/usr/share/snmp/mibs
+SNMPDRUN=yes
+SNMPDOPTS='-Lsd -Lf /dev/null -p /var/run/snmpd.pid'
+TRAPDRUN=no
+TRAPDOPTS='-Lsd -p /var/run/snmptrapd.pid'
+
+# Cd to / before starting any daemons.
+cd /
+
+case "$1" in
+  start)
+    echo -n "Starting network management services:"
+    if [ "$SNMPDRUN" = "yes" -a -f /etc/snmp/snmpd.conf ]; then
+	start-stop-daemon -S -x /usr/sbin/snmpd \
+	    -- $SNMPDOPTS
+	echo -n " snmpd"
+    fi
+    if [ "$TRAPDRUN" = "yes" -a -f /etc/snmp/snmptrapd.conf ]; then
+	start-stop-daemon -S -x /usr/sbin/snmptrapd \
+	    -- $TRAPDOPTS
+	echo -n " snmptrapd"
+    fi
+    echo "."
+    ;;
+  stop)
+    echo -n "Stopping network management services:"
+    start-stop-daemon -K -x /usr/sbin/snmpd
+    echo -n " snmpd"
+    start-stop-daemon -K -x /usr/sbin/snmptrapd
+    echo -n " snmptrapd"
+    echo "."
+    ;;
+  restart|reload|force-reload)
+    echo -n "Restarting network management services:"
+    start-stop-daemon -K -x /usr/sbin/snmpd
+    start-stop-daemon -K -x /usr/sbin/snmptrapd
+    # Allow the daemons time to exit completely.
+    sleep 2
+    if [ "$SNMPDRUN" = "yes" -a -f /etc/snmp/snmpd.conf ]; then
+	start-stop-daemon -S -x /usr/sbin/snmpd -- $SNMPDOPTS
+	echo -n " snmpd"
+    fi
+    if [ "$TRAPDRUN" = "yes" -a -f /etc/snmp/snmptrapd.conf ]; then
+	# Allow snmpd time to start up.
+	sleep 1
+	start-stop-daemon -S -x /usr/sbin/snmptrapd -- $TRAPDOPTS
+	echo -n " snmptrapd"
+    fi
+    echo "."
+    ;;
+  *)
+    echo "Usage: /etc/init.d/snmpd {start|stop|restart|reload|force-reload}"
+    exit 1
+esac
+
+exit 0
diff --git a/recipes/net-snmp/files/snmpd.conf b/recipes/net-snmp/files/snmpd.conf
new file mode 100644
index 0000000..4e6b2eb
--- /dev/null
+++ b/recipes/net-snmp/files/snmpd.conf
@@ -0,0 +1,422 @@ 
+###############################################################################
+#
+# EXAMPLE.conf:
+#   An example configuration file for configuring the ucd-snmp snmpd agent.
+#
+###############################################################################
+#
+# This file is intended to only be an example.  If, however, you want
+# to use it, it should be placed in /etc/snmp/snmpd.conf.
+# When the snmpd agent starts up, this is where it will look for it.
+#
+# You might be interested in generating your own snmpd.conf file using
+# the "snmpconf" program (perl script) instead.  It's a nice menu
+# based interface to writing well commented configuration files.  Try it!
+#
+# Note: This file is automatically generated from EXAMPLE.conf.def.
+# Do NOT read the EXAMPLE.conf.def file! Instead, after you have run
+# configure & make, and then make sure you read the EXAMPLE.conf file
+# instead, as it will tailor itself to your configuration.
+
+# All lines beginning with a '#' are comments and are intended for you
+# to read.  All other lines are configuration commands for the agent.
+
+#
+# PLEASE: read the snmpd.conf(5) manual page as well!
+#
+
+
+###############################################################################
+# Access Control
+###############################################################################
+
+# YOU SHOULD CHANGE THE "COMMUNITY" TOKEN BELOW TO A NEW KEYWORD ONLY
+# KNOWN AT YOUR SITE.  YOU *MUST* CHANGE THE NETWORK TOKEN BELOW TO
+# SOMETHING REFLECTING YOUR LOCAL NETWORK ADDRESS SPACE.
+
+# By far, the most common question I get about the agent is "why won't
+# it work?", when really it should be "how do I configure the agent to
+# allow me to access it?"
+#
+# By default, the agent responds to the "public" community for read
+# only access, if run out of the box without any configuration file in
+# place.  The following examples show you other ways of configuring
+# the agent so that you can change the community names, and give
+# yourself write access as well.
+#
+# The following lines change the access permissions of the agent so
+# that the COMMUNITY string provides read-only access to your entire
+# NETWORK (EG: 10.10.10.0/24), and read/write access to only the
+# localhost (127.0.0.1, not its real ipaddress).
+#
+# For more information, read the FAQ as well as the snmpd.conf(5)
+# manual page.
+
+####
+# First, map the community name (COMMUNITY) into a security name
+# (local and mynetwork, depending on where the request is coming
+# from):
+
+#       sec.name  source          community
+com2sec paranoid  default         public
+#com2sec readonly  default         public
+#com2sec readwrite default         private
+
+####
+# Second, map the security names into group names:
+
+#             	sec.model  sec.name
+group MyROSystem v1        paranoid
+group MyROSystem v2c       paranoid
+group MyROSystem usm       paranoid
+group MyROGroup v1         readonly
+group MyROGroup v2c        readonly
+group MyROGroup usm        readonly
+group MyRWGroup v1         readwrite
+group MyRWGroup v2c        readwrite
+group MyRWGroup usm        readwrite
+
+####
+# Third, create a view for us to let the groups have rights to:
+
+#           incl/excl subtree                          mask
+view all    included  .1                               80
+view system included  .iso.org.dod.internet.mgmt.mib-2.system
+
+####
+# Finally, grant the 2 groups access to the 1 view with different
+# write permissions:
+
+#                context sec.model sec.level match  read   write  notif
+access MyROSystem ""     any       noauth    exact  system none   none
+access MyROGroup ""      any       noauth    exact  all    none   none
+access MyRWGroup ""      any       noauth    exact  all    all    none
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# System contact information
+#
+
+# It is also possible to set the sysContact and sysLocation system
+# variables through the snmpd.conf file.  **PLEASE NOTE** that setting
+# the value of these objects here makes these objects READ-ONLY
+# (regardless of any access control settings).  Any attempt to set the
+# value of an object whose value is given here will fail with an error
+# status of notWritable.
+
+syslocation Unknown (configure /etc/snmp/snmpd.local.conf)
+syscontact Root <root@localhost> (configure /etc/snmp/snmpd.local.conf)
+
+# Example output of snmpwalk:
+#   % snmpwalk -v 1 -c public localhost system
+#   system.sysDescr.0 = "SunOS name sun4c"
+#   system.sysObjectID.0 = OID: enterprises.ucdavis.ucdSnmpAgent.sunos4
+#   system.sysUpTime.0 = Timeticks: (595637548) 68 days, 22:32:55
+#   system.sysContact.0 = "Me <me@somewhere.org>"
+#   system.sysName.0 = "name"
+#   system.sysLocation.0 = "Right here, right now."
+#   system.sysServices.0 = 72
+
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Process checks.
+#
+#  The following are examples of how to use the agent to check for
+#  processes running on the host.  The syntax looks something like:
+#
+#  proc NAME [MAX=0] [MIN=0]
+#
+#  NAME:  the name of the process to check for.  It must match
+#         exactly (ie, http will not find httpd processes).
+#  MAX:   the maximum number allowed to be running.  Defaults to 0.
+#  MIN:   the minimum number to be running.  Defaults to 0.
+
+#
+#  Examples:
+#
+
+#  Make sure mountd is running
+#proc mountd
+
+#  Make sure there are no more than 4 ntalkds running, but 0 is ok too.
+#proc ntalkd 4
+
+#  Make sure at least one sendmail, but less than or equal to 10 are running.
+#proc sendmail 10 1
+
+#  A snmpwalk of the prTable would look something like this:
+#
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.2
+# enterprises.ucdavis.procTable.prEntry.prIndex.1 = 1
+# enterprises.ucdavis.procTable.prEntry.prIndex.2 = 2
+# enterprises.ucdavis.procTable.prEntry.prIndex.3 = 3
+# enterprises.ucdavis.procTable.prEntry.prNames.1 = "mountd"
+# enterprises.ucdavis.procTable.prEntry.prNames.2 = "ntalkd"
+# enterprises.ucdavis.procTable.prEntry.prNames.3 = "sendmail"
+# enterprises.ucdavis.procTable.prEntry.prMin.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prMin.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prMin.3 = 1
+# enterprises.ucdavis.procTable.prEntry.prMax.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prMax.2 = 4
+# enterprises.ucdavis.procTable.prEntry.prMax.3 = 10
+# enterprises.ucdavis.procTable.prEntry.prCount.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prCount.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prCount.3 = 1
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.1 = 1
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrorFlag.3 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.1 = "No mountd process running."
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.2 = ""
+# enterprises.ucdavis.procTable.prEntry.prErrMessage.3 = ""
+# enterprises.ucdavis.procTable.prEntry.prErrFix.1 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrFix.2 = 0
+# enterprises.ucdavis.procTable.prEntry.prErrFix.3 = 0
+#
+#  Note that the errorFlag for mountd is set to 1 because one is not
+#  running (in this case an rpc.mountd is, but thats not good enough),
+#  and the ErrMessage tells you what's wrong.  The configuration
+#  imposed in the snmpd.conf file is also shown.
+#
+#  Special Case:  When the min and max numbers are both 0, it assumes
+#  you want a max of infinity and a min of 1.
+#
+
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Executables/scripts
+#
+
+#
+#  You can also have programs run by the agent that return a single
+#  line of output and an exit code.  Here are two examples.
+#
+#  exec NAME PROGRAM [ARGS ...]
+#
+#  NAME:     A generic name.
+#  PROGRAM:  The program to run.  Include the path!
+#  ARGS:     optional arguments to be passed to the program
+
+# a simple hello world
+#exec echotest /bin/echo hello world
+
+# Run a shell script containing:
+#
+# #!/bin/sh
+# echo hello world
+# echo hi there
+# exit 35
+#
+# Note:  this has been specifically commented out to prevent
+# accidental security holes due to someone else on your system writing
+# a /tmp/shtest before you do.  Uncomment to use it.
+#
+#exec shelltest /bin/sh /tmp/shtest
+
+# Then,
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.8
+# enterprises.ucdavis.extTable.extEntry.extIndex.1 = 1
+# enterprises.ucdavis.extTable.extEntry.extIndex.2 = 2
+# enterprises.ucdavis.extTable.extEntry.extNames.1 = "echotest"
+# enterprises.ucdavis.extTable.extEntry.extNames.2 = "shelltest"
+# enterprises.ucdavis.extTable.extEntry.extCommand.1 = "/bin/echo hello world"
+# enterprises.ucdavis.extTable.extEntry.extCommand.2 = "/bin/sh /tmp/shtest"
+# enterprises.ucdavis.extTable.extEntry.extResult.1 = 0
+# enterprises.ucdavis.extTable.extEntry.extResult.2 = 35
+# enterprises.ucdavis.extTable.extEntry.extOutput.1 = "hello world."
+# enterprises.ucdavis.extTable.extEntry.extOutput.2 = "hello world."
+# enterprises.ucdavis.extTable.extEntry.extErrFix.1 = 0
+# enterprises.ucdavis.extTable.extEntry.extErrFix.2 = 0
+
+# Note that the second line of the /tmp/shtest shell script is cut
+# off.  Also note that the exit status of 35 was returned.
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# disk checks
+#
+
+# The agent can check the amount of available disk space, and make
+# sure it is above a set limit.
+
+# disk PATH [MIN=DEFDISKMINIMUMSPACE]
+#
+# PATH:  mount path to the disk in question.
+# MIN:   Disks with space below this value will have the Mib's errorFlag set.
+#        Default value = DEFDISKMINIMUMSPACE.
+
+# Check the / partition and make sure it contains at least 10 megs.
+
+#disk / 10000
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.9
+# enterprises.ucdavis.diskTable.dskEntry.diskIndex.1 = 0
+# enterprises.ucdavis.diskTable.dskEntry.diskPath.1 = "/" Hex: 2F
+# enterprises.ucdavis.diskTable.dskEntry.diskDevice.1 = "/dev/dsk/c201d6s0"
+# enterprises.ucdavis.diskTable.dskEntry.diskMinimum.1 = 10000
+# enterprises.ucdavis.diskTable.dskEntry.diskTotal.1 = 837130
+# enterprises.ucdavis.diskTable.dskEntry.diskAvail.1 = 316325
+# enterprises.ucdavis.diskTable.dskEntry.diskUsed.1 = 437092
+# enterprises.ucdavis.diskTable.dskEntry.diskPercent.1 = 58
+# enterprises.ucdavis.diskTable.dskEntry.diskErrorFlag.1 = 0
+# enterprises.ucdavis.diskTable.dskEntry.diskErrorMsg.1 = ""
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# load average checks
+#
+
+# load [1MAX=DEFMAXLOADAVE] [5MAX=DEFMAXLOADAVE] [15MAX=DEFMAXLOADAVE]
+#
+# 1MAX:   If the 1 minute load average is above this limit at query
+#         time, the errorFlag will be set.
+# 5MAX:   Similar, but for 5 min average.
+# 15MAX:  Similar, but for 15 min average.
+
+# Check for loads:
+#load 12 14 14
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.10
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.1 = 1
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.2 = 2
+# enterprises.ucdavis.loadTable.laEntry.loadaveIndex.3 = 3
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.1 = "Load-1"
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.2 = "Load-5"
+# enterprises.ucdavis.loadTable.laEntry.loadaveNames.3 = "Load-15"
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.1 = "0.49" Hex: 30 2E 34 39
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.2 = "0.31" Hex: 30 2E 33 31
+# enterprises.ucdavis.loadTable.laEntry.loadaveLoad.3 = "0.26" Hex: 30 2E 32 36
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.1 = "12.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.2 = "14.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveConfig.3 = "14.00"
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.1 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.2 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrorFlag.3 = 0
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.1 = ""
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.2 = ""
+# enterprises.ucdavis.loadTable.laEntry.loadaveErrMessage.3 = ""
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Extensible sections.
+#
+
+# This alleviates the multiple line output problem found in the
+# previous executable mib by placing each mib in its own mib table:
+
+# Run a shell script containing:
+#
+# #!/bin/sh
+# echo hello world
+# echo hi there
+# exit 35
+#
+# Note:  this has been specifically commented out to prevent
+# accidental security holes due to someone else on your system writing
+# a /tmp/shtest before you do.  Uncomment to use it.
+#
+# exec .1.3.6.1.4.1.2021.50 shelltest /bin/sh /tmp/shtest
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.50
+# enterprises.ucdavis.50.1.1 = 1
+# enterprises.ucdavis.50.2.1 = "shelltest"
+# enterprises.ucdavis.50.3.1 = "/bin/sh /tmp/shtest"
+# enterprises.ucdavis.50.100.1 = 35
+# enterprises.ucdavis.50.101.1 = "hello world."
+# enterprises.ucdavis.50.101.2 = "hi there."
+# enterprises.ucdavis.50.102.1 = 0
+
+# Now the Output has grown to two lines, and we can see the 'hi
+# there.' output as the second line from our shell script.
+#
+# Note that you must alter the mib.txt file to be correct if you want
+# the .50.* outputs above to change to reasonable text descriptions.
+
+# Other ideas:
+#
+# exec .1.3.6.1.4.1.2021.51 ps /bin/ps
+# exec .1.3.6.1.4.1.2021.52 top /usr/local/bin/top
+# exec .1.3.6.1.4.1.2021.53 mailq /usr/bin/mailq
+
+# -----------------------------------------------------------------------------
+
+
+###############################################################################
+# Pass through control.
+#
+
+# Usage:
+#   pass MIBOID EXEC-COMMAND
+#
+# This will pass total control of the mib underneath the MIBOID
+# portion of the mib to the EXEC-COMMAND.
+#
+# Note:  You'll have to change the path of the passtest script to your
+# source directory or install it in the given location.
+#
+# Example:  (see the script for details)
+#           (commented out here since it requires that you place the
+#           script in the right location. (its not installed by default))
+
+# pass .1.3.6.1.4.1.2021.255 /bin/sh /usr/local/passtest
+
+# % snmpwalk -v 1 -c public localhost .1.3.6.1.4.1.2021.255
+# enterprises.ucdavis.255.1 = "life the universe and everything"
+# enterprises.ucdavis.255.2.1 = 42
+# enterprises.ucdavis.255.2.2 = OID: 42.42.42
+# enterprises.ucdavis.255.3 = Timeticks: (363136200) 42 days, 0:42:42
+# enterprises.ucdavis.255.4 = IpAddress: 127.0.0.1
+# enterprises.ucdavis.255.5 = 42
+# enterprises.ucdavis.255.6 = Gauge: 42
+#
+# % snmpget -v 1 -c public localhost .1.3.6.1.4.1.2021.255.5
+# enterprises.ucdavis.255.5 = 42
+#
+# % snmpset -v 1 -c public localhost .1.3.6.1.4.1.2021.255.1 s "New string"
+# enterprises.ucdavis.255.1 = "New string"
+#
+
+# For specific usage information, see the man/snmpd.conf.5 manual page
+# as well as the local/passtest script used in the above example.
+
+###############################################################################
+# Subagent control
+#
+
+# The agent can support subagents using a number of extension mechanisms.
+# From the 4.2.1 release, AgentX support is being compiled in by default.
+# However, this is still experimental code, so should not be used on
+# critical production systems.
+#   Please see the file README.agentx for more details.
+#
+# If having read, marked, learnt and inwardly digested this information,
+# you decide that you do wish to make use of this mechanism, simply
+# uncomment the following directive.
+#
+#  master  agentx
+#
+# I repeat - this is *NOT* regarded as suitable for front-line production
+# systems, though it is probably stable enough for day-to-day use.
+# Probably.
+#
+# No refunds will be given.
+
+###############################################################################
+# Further Information
+#
+#  See the snmpd.conf manual page, and the output of "snmpd -H".
+#  MUCH more can be done with the snmpd.conf than is shown as an
+#  example here.
diff --git a/recipes/net-snmp/files/snmptrapd.conf b/recipes/net-snmp/files/snmptrapd.conf
new file mode 100644
index 0000000..a012a00
--- /dev/null
+++ b/recipes/net-snmp/files/snmptrapd.conf
@@ -0,0 +1,17 @@ 
+###############################################################################
+#
+# EXAMPLE.conf:
+#   An example configuration file for configuring the ucd-snmp snmptrapd agent.
+#
+###############################################################################
+#
+# This file is intended to only be an example.  If, however, you want
+# to use it, it should be placed in /etc/snmp/snmptrapd.conf.
+# When the snmptrapd agent starts up, this is where it will look for it.
+#
+# All lines beginning with a '#' are comments and are intended for you
+# to read.  All other lines are configuration commands for the agent.
+
+#
+# PLEASE: read the snmptrapd.conf(5) manual page as well!
+#
diff --git a/recipes/net-snmp/net-snmp-5.7.2/.net-snmp-libnl.patch.swp b/recipes/net-snmp/net-snmp-5.7.2/.net-snmp-libnl.patch.swp
new file mode 100644
index 0000000000000000000000000000000000000000..e2ffc4f0d028d5f983ec5f9f12a71b2c31bfa0fa
GIT binary patch
literal 12288
zcmeI2&2Jk;7{(`j6$334j!~s)5M>>E?e%x;Hjt3GCW;f&#6hYATCKffXUXoYySpxg
zQjj<!4sb^T3H5*A!i5tz#EJd`y&@1uNFedd?m8b$S|>^`RmRd!vmVdR%=^60%x;wF
zXzwnq&`PF2@Og=liOH|7-TC($GO<lax8sZ2v7gS+vd!GsX5>?JnC%Yzz;&4CXM1kf
z<yot5I9ZR`%<x&(VS$nDh%1kEtpW41oCT`Sox#q9TFO*1x!td})!}w#U<BRG@iUMu
zqync|fwQEL&uKz|SEnx0S6<#Y&0@&dr2<j`sen{KDj*e*3P=T{0;f)aU@$>GL)1^i
zk<Z8F#C>J_RTfeKsen{KDj*e*3P=T{0#X5~fK)&#AQg}bJcbGwCLupOO~~D6FnRp{
zfAshN_b(E%3Thw&&VzH{N$~4ALhgXu;1=kE3*Zd+=PV(Afj_}dzy_0G0{r{}AugB%
zPl3OmC*%+CJGcwB!5iQTI1he&ju0PQ2baJv2|_*xTi|_g9W+1z<iG`R?^!~=1qQeZ
z{yT&Cz<1zl@Fn;Hd;~rKJz#=mPyz*T5ePkg6Pn16R6r^q6_5%%W(v?mVzK_#Mq_2Y
z(QYcrlw)<4ma;*2&^9_Yn@ZEErfZnYr0s=wXjn&wzQy|#N6u`EZ@tH-lF7@2CafM+
zaGSo#3^Pe@5lT`CZtK3=-C}{>^B7aOjh3pY-88sqGu>o<;JMq;4-}o;28pn3XV^pI
zxjCwqi^X(>rpm<<in%#-j5cAzgvWxR$EljTjKLCz4kzlx$vEA1`%1Ib(Cce!2uf6$
zHHxX=2;EI3S);G{2qi6Q`Yd3c=X#3GxQI=3F-D^!^b>|2&hfC|)e}rp%u(EbqB$m`
zEQV<mfz#O?ak!nPmj;Y^D3F#kUEOFllSz7ImTF<96CZ9`HlvC+<Q&$BvM*9ssut2!
znkrR`C`9UzBFFE?Zg4Q~IOY2j2{jMc21$5m8hyr1-53TqE$IwwWbgqwMP}oij+g6L
zeTGI6i$K8;k$OA#>pPPYT5?B-7iovQA=(Ex;*kU#yW`PC8#+Y|jUo~?()~b;qY%Y<
zjnZxm257Bt2S)PPjWqSGkD1$3un7#i0kyED=%!`#u_kXM(-27bBmNOX!8vrAJE6A1
zMTTv=UEQ}tz7=dwi%atjy-{zkw-%OR(&mbORbOkh+Mh(1EA#Dzx8v)z`n8SvdK&|T
zHmy|CISoFY(L@>VG2s?-LSrttL)+x92NY*`IYW$rJK8u8-EofW&Z`DioGH3HPS1yU
zG`<~MFeIzDn@g+9`Vua5q2`HwdffPrX4Yc|zu&SC4|%U`@3%l`mU1yNOSv>M%h;`V
zcfz4(jew0@K%=F<?<vY{Iy)O}vhj0tcMXVr5sLsV#P%HTl3}L`lB@1nEm6n2ZR0&=
zr!7rnrzvf>7F#tsVBV%N@bP44;@UAd;{gVUXZI$Z&f+O(p$-PcqQujE^oD@vs$uH!
z%Ybszwag@;eqaPv7YjOw)>o;Np26}$5k3Y|sg#I6Jh6_0>SY{MH~JVci<ghS=MD$r
zV$WMhrkluXxtyvM)O>~J^R+^?R;*;oTDe*(m&!Ss((;-{R8>7@w;9*#AM83;$Q1K4
MmHbReE5}{`4_pWoHvj+t

literal 0
HcmV?d00001

diff --git a/recipes/net-snmp/net-snmp-5.7.2/net-snmp-libnl.patch b/recipes/net-snmp/net-snmp-5.7.2/net-snmp-libnl.patch
new file mode 100644
index 0000000..0879e45
--- /dev/null
+++ b/recipes/net-snmp/net-snmp-5.7.2/net-snmp-libnl.patch
@@ -0,0 +1,65 @@ 
+--- net-snmp-5.6.1/agent/mibgroup/mibII/tcpTable.c.org	2011-03-27 22:39:13.428728506 +0200
++++ net-snmp-5.6.1/agent/mibgroup/mibII/tcpTable.c	2011-03-27 22:39:47.606956561 +0200
+@@ -555,8 +555,9 @@
+ static int
+ tcpTable_load_netlink(void)
+ {
++	int err;
+ 	/*  TODO: perhaps use permanent nl handle? */
+-	struct nl_handle *nl = nl_handle_alloc();
++	struct nl_sock *nl = nl_socket_alloc();
+ 
+ 	if (nl == NULL) {
+ 		DEBUGMSGTL(("mibII/tcpTable", "Failed to allocate netlink handle\n"));
+@@ -564,10 +565,10 @@
+ 		return -1;
+ 	}
+ 
+-	if (nl_connect(nl, NETLINK_INET_DIAG) < 0) {
+-		DEBUGMSGTL(("mibII/tcpTable", "Failed to connect to netlink: %s\n", nl_geterror()));
+-		snmp_log(LOG_ERR, "snmpd: Couldn't connect to netlink: %s\n", nl_geterror());
+-		nl_handle_destroy(nl);
++	if ((err = nl_connect(nl, NETLINK_INET_DIAG)) < 0) {
++		DEBUGMSGTL(("mibII/tcpTable", "Failed to connect to netlink: %s\n", nl_geterror(err)));
++		snmp_log(LOG_ERR, "snmpd: Couldn't connect to netlink: %s\n", nl_geterror(err));
++		nl_socket_free(nl);
+ 		return -1;
+ 	}
+ 
+@@ -579,10 +580,10 @@
+ 	struct nl_msg *nm = nlmsg_alloc_simple(TCPDIAG_GETSOCK, NLM_F_ROOT|NLM_F_MATCH|NLM_F_REQUEST);
+ 	nlmsg_append(nm, &req, sizeof(struct inet_diag_req), 0);
+ 
+-	if (nl_send_auto_complete(nl, nm) < 0) {
+-		DEBUGMSGTL(("mibII/tcpTable", "nl_send_autocomplete(): %s\n", nl_geterror()));
+-		snmp_log(LOG_ERR, "snmpd: nl_send_autocomplete(): %s\n", nl_geterror());
+-		nl_handle_destroy(nl);
++	if ((err = nl_send_auto_complete(nl, nm)) < 0) {
++		DEBUGMSGTL(("mibII/tcpTable", "nl_send_autocomplete(): %s\n", nl_geterror(err)));
++		snmp_log(LOG_ERR, "snmpd: nl_send_autocomplete(): %s\n", nl_geterror(err));
++		nl_socket_free(nl);
+ 		return -1;
+ 	}
+ 	nlmsg_free(nm);
+@@ -593,9 +594,9 @@
+ 
+ 	while (running) {
+ 		if ((len = nl_recv(nl, &peer, &buf, NULL)) <= 0) {
+-			DEBUGMSGTL(("mibII/tcpTable", "nl_recv(): %s\n", nl_geterror()));
+-			snmp_log(LOG_ERR, "snmpd: nl_recv(): %s\n", nl_geterror());
+-			nl_handle_destroy(nl);
++			DEBUGMSGTL(("mibII/tcpTable", "nl_recv(): %s\n", nl_geterror(len)));
++			snmp_log(LOG_ERR, "snmpd: nl_recv(): %s\n", nl_geterror(len));
++			nl_socket_free(nl);
+ 			return -1;
+ 		}
+ 
+@@ -644,7 +645,7 @@
+ 		free(buf);
+ 	}
+ 
+-	nl_handle_destroy(nl);
++	nl_socket_free(nl);
+ 
+ 	if (tcp_head) {
+ 		DEBUGMSGTL(("mibII/tcpTable", "Loaded TCP Table using netlink\n"));
diff --git a/recipes/net-snmp/net-snmp.inc b/recipes/net-snmp/net-snmp.inc
new file mode 100644
index 0000000..5914e1a
--- /dev/null
+++ b/recipes/net-snmp/net-snmp.inc
@@ -0,0 +1,54 @@ 
+DESCRIPTION = "Various tools relating to the Simple Network Management Protocol"
+HOMEPAGE = "http://www.net-snmp.org/"
+LICENSE = "BSD"
+
+DEPENDS = "openssl"
+
+inherit autotools-autoreconf sysvinit siteinfo
+
+require conf/fetch/sourceforge.conf
+SRC_URI = "${SOURCEFORGE_MIRROR}/net-snmp/net-snmp-${PV}.tar.gz"
+
+SRC_URI += "file://init \
+	    file://snmpd.conf \
+	    file://snmptrapd.conf"
+
+EXTRA_OECONF = "--enable-shared --disable-manuals --with-defaults "
+
+do_install[postfuncs] += "do_install_snmp_scripts"
+do_install_snmp_scripts () {
+	install -d ${D}${sysconfdir}/snmp
+	install -d ${D}${sysconfdir}/init.d
+	install -m 0755 ${SRCDIR}/init ${D}${sysconfdir}/init.d/snmpd
+	install -m 0755 ${SRCDIR}/snmpd.conf ${D}${sysconfdir}/snmp/
+	install -m 0755 ${SRCDIR}/snmptrapd.conf ${D}${sysconfdir}/snmp/
+}
+
+inherit auto-package-libs
+AUTO_PACKAGE_LIBS = "netsnmpagent netsnmphelpers netsnmpmibs netsnmp netsnmptrapd"
+
+AUTO_PACKAGE_LIBS_RDEPENDS += "libc"
+RDEPENDS_${PN}-libnetsnmpagent += "libnetsnmp"
+RDEPENDS_${PN}-libnetsnmpmibs += "libnetsnmpagent libgcc libnetsnmp"
+RDEPENDS_${PN}-libnetsnmptrapd += "libnetsnmpagent libgcc libnetsnmp libnetsnmpmibs"
+
+inherit auto-package-utils
+AUTO_PACKAGE_UTILS = "\
+ agentxtrap encode_keychange fixproc ipf-mod.pl net-snmp-cert\
+ net-snmp-create-v3-user snmp-bridge-mib snmpbulkget snmpbulkwalk\
+ snmpcheck snmpconf snmpdelta snmpdf snmpget snmpgetnext\
+ snmpinform snmptrap snmpnetstat snmpset snmpstatus snmptable\
+ snmpusm snmpvacm snmpwalk tkmib snmptest snmptranslate \
+ traptoemail mib2c mib2c-update net-snmp-config"
+
+AUTO_PACKAGE_UTILS_RDEPENDS += "libnetsnmp libc"
+RDEPENDS_${PN}-snmpinform += "${PN}-snmptrap"
+RDEPENDS_${PN}-agentxtrap += "libnetsnmpmibs libnetsnmpagent"
+
+PACKAGES =+ "${PN}-mibs ${PN}-client ${PN}-server"
+RDEPENDS_${PN}-server += "libnetsnmptrapd libnetsnmpmibs libnetsnmpagent libnetsnmp"
+RDEPENDS_${PN}-client += "${AUTO_PACKAGE_UTILS_PROVIDES}"
+
+FILES_${PN}-mibs = "${datadir}/snmp/mibs"
+FILES_${PN}-client += "${datadir}/snmp"
+FILES_${PN}-server += "${sysconfdir} ${sbindir}/*"
diff --git a/recipes/net-snmp/net-snmp_5.7.2.oe b/recipes/net-snmp/net-snmp_5.7.2.oe
new file mode 100644
index 0000000..737f930
--- /dev/null
+++ b/recipes/net-snmp/net-snmp_5.7.2.oe
@@ -0,0 +1,8 @@ 
+require net-snmp.inc
+
+SRC_URI += "file://net-snmp-libnl.patch"
+
+EXTRA_OECONF += "--disable-embedded-perl --with-perl-modules=no"
+EXTRA_OEMAKE = "INSTALL_PREFIX=${D}"
+
+PARALLEL_MAKE = ""
diff --git a/recipes/net-snmp/net-snmp_5.7.2.oe.sig b/recipes/net-snmp/net-snmp_5.7.2.oe.sig
new file mode 100644
index 0000000..4ed197b
--- /dev/null
+++ b/recipes/net-snmp/net-snmp_5.7.2.oe.sig
@@ -0,0 +1 @@ 
+c493027907f32400648244d81117a126aecd27ee  net-snmp-5.7.2.tar.gz