diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index bed9d58..7978caa 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -157,24 +157,6 @@ config MTD_PXA2XX
 	help
 	  This provides a driver for the NOR flash attached to a PXA2xx chip.
 
-config MTD_OCTAGON
-	tristate "JEDEC Flash device mapped on Octagon 5066 SBC"
-	depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
-	help
-	  This provides a 'mapping' driver which supports the way in which
-	  the flash chips are connected in the Octagon-5066 Single Board
-	  Computer. More information on the board is available at
-	  <http://www.octagonsystems.com/products/5066.aspx>.
-
-config MTD_VMAX
-	tristate "JEDEC Flash device mapped on Tempustech VMAX SBC301"
-	depends on X86 && MTD_JEDEC && MTD_COMPLEX_MAPPINGS
-	help
-	  This provides a 'mapping' driver which supports the way in which
-	  the flash chips are connected in the Tempustech VMAX SBC301 Single
-	  Board Computer. More information on the board is available at
-	  <http://www.tempustech.com/>.
-
 config MTD_SCx200_DOCFLASH
 	tristate "Flash device mapped with DOCCS on NatSemi SCx200"
 	depends on SCx200 && MTD_CFI
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index 395a124..a5bb4a91 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_MTD_ICHXROM)	+= ichxrom.o
 obj-$(CONFIG_MTD_CK804XROM)	+= ck804xrom.o
 obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
 obj-$(CONFIG_MTD_PXA2XX)	+= pxa2xx-flash.o
-obj-$(CONFIG_MTD_OCTAGON)	+= octagon-5066.o
 obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
 obj-$(CONFIG_MTD_PHYSMAP_OF)	+= physmap_of.o
 obj-$(CONFIG_MTD_PISMO)		+= pismo.o
@@ -28,7 +27,6 @@ obj-$(CONFIG_MTD_SC520CDP)	+= sc520cdp.o
 obj-$(CONFIG_MTD_NETSC520)	+= netsc520.o
 obj-$(CONFIG_MTD_TS5500)	+= ts5500_flash.o
 obj-$(CONFIG_MTD_SUN_UFLASH)	+= sun_uflash.o
-obj-$(CONFIG_MTD_VMAX)		+= vmax301.o
 obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
 obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
 obj-$(CONFIG_MTD_PCI)		+= pci.o
diff --git a/drivers/mtd/maps/octagon-5066.c b/drivers/mtd/maps/octagon-5066.c
deleted file mode 100644
index 807ac2a..0000000
--- a/drivers/mtd/maps/octagon-5066.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/* ######################################################################
-
-   Octagon 5066 MTD Driver.
-
-   The Octagon 5066 is a SBC based on AMD's 586-WB running at 133 MHZ. It
-   comes with a builtin AMD 29F016 flash chip and a socketed EEPROM that
-   is replacable by flash. Both units are mapped through a multiplexer
-   into a 32k memory window at 0xe8000. The control register for the
-   multiplexing unit is located at IO 0x208 with a bit map of
-     0-5 Page Selection in 32k increments
-     6-7 Device selection:
-        00 SSD off
-        01 SSD 0 (Socket)
-        10 SSD 1 (Flash chip)
-        11 undefined
-
-   On each SSD, the first 128k is reserved for use by the bios
-   (actually it IS the bios..) This only matters if you are booting off the
-   flash, you must not put a file system starting there.
-
-   The driver tries to do a detection algorithm to guess what sort of devices
-   are plugged into the sockets.
-
-   ##################################################################### */
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <asm/io.h>
-
-#include <linux/mtd/map.h>
-#include <linux/mtd/mtd.h>
-
-#define WINDOW_START 0xe8000
-#define WINDOW_LENGTH 0x8000
-#define WINDOW_SHIFT 27
-#define WINDOW_MASK 0x7FFF
-#define PAGE_IO 0x208
-
-static volatile char page_n_dev = 0;
-static unsigned long iomapadr;
-static DEFINE_SPINLOCK(oct5066_spin);
-
-/*
- * We use map_priv_1 to identify which device we are.
- */
-
-static void __oct5066_page(struct map_info *map, __u8 byte)
-{
-	outb(byte,PAGE_IO);
-	page_n_dev = byte;
-}
-
-static inline void oct5066_page(struct map_info *map, unsigned long ofs)
-{
-	__u8 byte = map->map_priv_1 | (ofs >> WINDOW_SHIFT);
-
-	if (page_n_dev != byte)
-		__oct5066_page(map, byte);
-}
-
-
-static map_word oct5066_read8(struct map_info *map, unsigned long ofs)
-{
-	map_word ret;
-	spin_lock(&oct5066_spin);
-	oct5066_page(map, ofs);
-	ret.x[0] = readb(iomapadr + (ofs & WINDOW_MASK));
-	spin_unlock(&oct5066_spin);
-	return ret;
-}
-
-static void oct5066_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
-	while(len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
-
-		spin_lock(&oct5066_spin);
-		oct5066_page(map, from);
-		memcpy_fromio(to, iomapadr + from, thislen);
-		spin_unlock(&oct5066_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static void oct5066_write8(struct map_info *map, map_word d, unsigned long adr)
-{
-	spin_lock(&oct5066_spin);
-	oct5066_page(map, adr);
-	writeb(d.x[0], iomapadr + (adr & WINDOW_MASK));
-	spin_unlock(&oct5066_spin);
-}
-
-static void oct5066_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
-	while(len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
-
-		spin_lock(&oct5066_spin);
-		oct5066_page(map, to);
-		memcpy_toio(iomapadr + to, from, thislen);
-		spin_unlock(&oct5066_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static struct map_info oct5066_map[2] = {
-	{
-		.name = "Octagon 5066 Socket",
-		.phys = NO_XIP,
-		.size = 512 * 1024,
-		.bankwidth = 1,
-		.read = oct5066_read8,
-		.copy_from = oct5066_copy_from,
-		.write = oct5066_write8,
-		.copy_to = oct5066_copy_to,
-		.map_priv_1 = 1<<6
-	},
-	{
-		.name = "Octagon 5066 Internal Flash",
-		.phys = NO_XIP,
-		.size = 2 * 1024 * 1024,
-		.bankwidth = 1,
-		.read = oct5066_read8,
-		.copy_from = oct5066_copy_from,
-		.write = oct5066_write8,
-		.copy_to = oct5066_copy_to,
-		.map_priv_1 = 2<<6
-	}
-};
-
-static struct mtd_info *oct5066_mtd[2] = {NULL, NULL};
-
-// OctProbe - Sense if this is an octagon card
-// ---------------------------------------------------------------------
-/* Perform a simple validity test, we map the window select SSD0 and
-   change pages while monitoring the window. A change in the window,
-   controlled by the PAGE_IO port is a functioning 5066 board. This will
-   fail if the thing in the socket is set to a uniform value. */
-static int __init OctProbe(void)
-{
-   unsigned int Base = (1 << 6);
-   unsigned long I;
-   unsigned long Values[10];
-   for (I = 0; I != 20; I++)
-   {
-      outb(Base + (I%10),PAGE_IO);
-      if (I < 10)
-      {
-	 // Record the value and check for uniqueness
-	 Values[I%10] = readl(iomapadr);
-	 if (I > 0 && Values[I%10] == Values[0])
-	    return -EAGAIN;
-      }
-      else
-      {
-	 // Make sure we get the same values on the second pass
-	 if (Values[I%10] != readl(iomapadr))
-	    return -EAGAIN;
-      }
-   }
-   return 0;
-}
-
-void cleanup_oct5066(void)
-{
-	int i;
-	for (i=0; i<2; i++) {
-		if (oct5066_mtd[i]) {
-			mtd_device_unregister(oct5066_mtd[i]);
-			map_destroy(oct5066_mtd[i]);
-		}
-	}
-	iounmap((void *)iomapadr);
-	release_region(PAGE_IO, 1);
-}
-
-static int __init init_oct5066(void)
-{
-	int i;
-	int ret = 0;
-
-	// Do an autoprobe sequence
-	if (!request_region(PAGE_IO,1,"Octagon SSD")) {
-		printk(KERN_NOTICE "5066: Page Register in Use\n");
-		return -EAGAIN;
-	}
-	iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH);
-	if (!iomapadr) {
-		printk(KERN_NOTICE "Failed to ioremap memory region\n");
-		ret = -EIO;
-		goto out_rel;
-	}
-	if (OctProbe() != 0) {
-		printk(KERN_NOTICE "5066: Octagon Probe Failed, is this an Octagon 5066 SBC?\n");
-		iounmap((void *)iomapadr);
-		ret = -EAGAIN;
-		goto out_unmap;
-	}
-
-	// Print out our little header..
-	printk("Octagon 5066 SSD IO:0x%x MEM:0x%x-0x%x\n",PAGE_IO,WINDOW_START,
-	       WINDOW_START+WINDOW_LENGTH);
-
-	for (i=0; i<2; i++) {
-		oct5066_mtd[i] = do_map_probe("cfi_probe", &oct5066_map[i]);
-		if (!oct5066_mtd[i])
-			oct5066_mtd[i] = do_map_probe("jedec", &oct5066_map[i]);
-		if (!oct5066_mtd[i])
-			oct5066_mtd[i] = do_map_probe("map_ram", &oct5066_map[i]);
-		if (!oct5066_mtd[i])
-			oct5066_mtd[i] = do_map_probe("map_rom", &oct5066_map[i]);
-		if (oct5066_mtd[i]) {
-			oct5066_mtd[i]->owner = THIS_MODULE;
-			mtd_device_register(oct5066_mtd[i], NULL, 0);
-		}
-	}
-
-	if (!oct5066_mtd[0] && !oct5066_mtd[1]) {
-		cleanup_oct5066();
-		return -ENXIO;
-	}
-
-	return 0;
-
- out_unmap:
-	iounmap((void *)iomapadr);
- out_rel:
-	release_region(PAGE_IO, 1);
-	return ret;
-}
-
-module_init(init_oct5066);
-module_exit(cleanup_oct5066);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jason Gunthorpe <jgg@deltatee.com>, David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("MTD map driver for Octagon 5066 Single Board Computer");
diff --git a/drivers/mtd/maps/vmax301.c b/drivers/mtd/maps/vmax301.c
deleted file mode 100644
index 5e68de7..0000000
--- a/drivers/mtd/maps/vmax301.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/* ######################################################################
-
-   Tempustech VMAX SBC301 MTD Driver.
-
-   The VMAx 301 is a SBC based on . It
-   comes with three builtin AMD 29F016B flash chips and a socket for SRAM or
-   more flash. Each unit has it's own 8k mapping into a settable region
-   (0xD8000). There are two 8k mappings for each MTD, the first is always set
-   to the lower 8k of the device the second is paged. Writing a 16 bit page
-   value to anywhere in the first 8k will cause the second 8k to page around.
-
-   To boot the device a bios extension must be installed into the first 8k
-   of flash that is smart enough to copy itself down, page in the rest of
-   itself and begin executing.
-
-   ##################################################################### */
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <asm/io.h>
-
-#include <linux/mtd/map.h>
-#include <linux/mtd/mtd.h>
-
-
-#define WINDOW_START 0xd8000
-#define WINDOW_LENGTH 0x2000
-#define WINDOW_SHIFT 25
-#define WINDOW_MASK 0x1FFF
-
-/* Actually we could use two spinlocks, but we'd have to have
-   more private space in the struct map_info. We lose a little
-   performance like this, but we'd probably lose more by having
-   the extra indirection from having one of the map->map_priv
-   fields pointing to yet another private struct.
-*/
-static DEFINE_SPINLOCK(vmax301_spin);
-
-static void __vmax301_page(struct map_info *map, unsigned long page)
-{
-	writew(page, map->map_priv_2 - WINDOW_LENGTH);
-	map->map_priv_1 = page;
-}
-
-static inline void vmax301_page(struct map_info *map,
-				  unsigned long ofs)
-{
-	unsigned long page = (ofs >> WINDOW_SHIFT);
-	if (map->map_priv_1 != page)
-		__vmax301_page(map, page);
-}
-
-static map_word vmax301_read8(struct map_info *map, unsigned long ofs)
-{
-	map_word ret;
-	spin_lock(&vmax301_spin);
-	vmax301_page(map, ofs);
-	ret.x[0] = readb(map->map_priv_2 + (ofs & WINDOW_MASK));
-	spin_unlock(&vmax301_spin);
-	return ret;
-}
-
-static void vmax301_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-{
-	while(len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (from & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(from & WINDOW_MASK);
-		spin_lock(&vmax301_spin);
-		vmax301_page(map, from);
-		memcpy_fromio(to, map->map_priv_2 + from, thislen);
-		spin_unlock(&vmax301_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static void vmax301_write8(struct map_info *map, map_word d, unsigned long adr)
-{
-	spin_lock(&vmax301_spin);
-	vmax301_page(map, adr);
-	writeb(d.x[0], map->map_priv_2 + (adr & WINDOW_MASK));
-	spin_unlock(&vmax301_spin);
-}
-
-static void vmax301_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len)
-{
-	while(len) {
-		unsigned long thislen = len;
-		if (len > (WINDOW_LENGTH - (to & WINDOW_MASK)))
-			thislen = WINDOW_LENGTH-(to & WINDOW_MASK);
-
-		spin_lock(&vmax301_spin);
-		vmax301_page(map, to);
-		memcpy_toio(map->map_priv_2 + to, from, thislen);
-		spin_unlock(&vmax301_spin);
-		to += thislen;
-		from += thislen;
-		len -= thislen;
-	}
-}
-
-static struct map_info vmax_map[2] = {
-	{
-		.name = "VMAX301 Internal Flash",
-		.phys = NO_XIP,
-		.size = 3*2*1024*1024,
-		.bankwidth = 1,
-		.read = vmax301_read8,
-		.copy_from = vmax301_copy_from,
-		.write = vmax301_write8,
-		.copy_to = vmax301_copy_to,
-		.map_priv_1 = WINDOW_START + WINDOW_LENGTH,
-		.map_priv_2 = 0xFFFFFFFF
-	},
-	{
-		.name = "VMAX301 Socket",
-		.phys = NO_XIP,
-		.size = 0,
-		.bankwidth = 1,
-		.read = vmax301_read8,
-		.copy_from = vmax301_copy_from,
-		.write = vmax301_write8,
-		.copy_to = vmax301_copy_to,
-		.map_priv_1 = WINDOW_START + (3*WINDOW_LENGTH),
-		.map_priv_2 = 0xFFFFFFFF
-	}
-};
-
-static struct mtd_info *vmax_mtd[2] = {NULL, NULL};
-
-static void __exit cleanup_vmax301(void)
-{
-	int i;
-
-	for (i=0; i<2; i++) {
-		if (vmax_mtd[i]) {
-			mtd_device_unregister(vmax_mtd[i]);
-			map_destroy(vmax_mtd[i]);
-		}
-	}
-	iounmap((void *)vmax_map[0].map_priv_1 - WINDOW_START);
-}
-
-static int __init init_vmax301(void)
-{
-	int i;
-	unsigned long iomapadr;
-	// Print out our little header..
-	printk("Tempustech VMAX 301 MEM:0x%x-0x%x\n",WINDOW_START,
-	       WINDOW_START+4*WINDOW_LENGTH);
-
-	iomapadr = (unsigned long)ioremap(WINDOW_START, WINDOW_LENGTH*4);
-	if (!iomapadr) {
-		printk("Failed to ioremap memory region\n");
-		return -EIO;
-	}
-	/* Put the address in the map's private data area.
-	   We store the actual MTD IO address rather than the
-	   address of the first half, because it's used more
-	   often.
-	*/
-	vmax_map[0].map_priv_2 = iomapadr + WINDOW_START;
-	vmax_map[1].map_priv_2 = iomapadr + (3*WINDOW_START);
-
-	for (i=0; i<2; i++) {
-		vmax_mtd[i] = do_map_probe("cfi_probe", &vmax_map[i]);
-		if (!vmax_mtd[i])
-			vmax_mtd[i] = do_map_probe("jedec", &vmax_map[i]);
-		if (!vmax_mtd[i])
-			vmax_mtd[i] = do_map_probe("map_ram", &vmax_map[i]);
-		if (!vmax_mtd[i])
-			vmax_mtd[i] = do_map_probe("map_rom", &vmax_map[i]);
-		if (vmax_mtd[i]) {
-			vmax_mtd[i]->owner = THIS_MODULE;
-			mtd_device_register(vmax_mtd[i], NULL, 0);
-		}
-	}
-
-	if (!vmax_mtd[0] && !vmax_mtd[1]) {
-		iounmap((void *)iomapadr);
-		return -ENXIO;
-	}
-
-	return 0;
-}
-
-module_init(init_vmax301);
-module_exit(cleanup_vmax301);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
-MODULE_DESCRIPTION("MTD map driver for Tempustech VMAX SBC301 board");
