Patchwork [net,3/8] qlcnic: Fix missing bracket in module parameter.

login
register
mail settings
Submitter Shahed Shaikh
Date May 7, 2013, 7:55 p.m.
Message ID <1367956506-3290-4-git-send-email-shahed.shaikh@qlogic.com>
Download mbox | patch
Permalink /patch/242455/
State Changes Requested
Delegated to: David Miller
Headers show

Comments

Shahed Shaikh - May 7, 2013, 7:55 p.m.
From: Himanshu Madhani <himanshu.madhani@qlogic.com>

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
---
 drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

Patch

diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 04037b5..d97446a 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -37,24 +37,24 @@  MODULE_PARM_DESC(qlcnic_mac_learn,
 		 "Mac Filter (0=learning is disabled, 1=Driver learning is enabled, 2=FDB learning is enabled)");
 
 int qlcnic_use_msi = 1;
-MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled");
+MODULE_PARM_DESC(use_msi, "MSI interrupt (0=disabled, 1=enabled)");
 module_param_named(use_msi, qlcnic_use_msi, int, 0444);
 
 int qlcnic_use_msi_x = 1;
-MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled");
+MODULE_PARM_DESC(use_msi_x, "MSI-X interrupt (0=disabled, 1=enabled)");
 module_param_named(use_msi_x, qlcnic_use_msi_x, int, 0444);
 
 int qlcnic_auto_fw_reset = 1;
-MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled");
+MODULE_PARM_DESC(auto_fw_reset, "Auto firmware reset (0=disabled, 1=enabled)");
 module_param_named(auto_fw_reset, qlcnic_auto_fw_reset, int, 0644);
 
 int qlcnic_load_fw_file;
-MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file");
+MODULE_PARM_DESC(load_fw_file, "Load firmware from (0=flash, 1=file)");
 module_param_named(load_fw_file, qlcnic_load_fw_file, int, 0444);
 
 int qlcnic_config_npars;
 module_param(qlcnic_config_npars, int, 0444);
-MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled");
+MODULE_PARM_DESC(qlcnic_config_npars, "Configure NPARs (0=disabled, 1=enabled)");
 
 static int qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
 static void qlcnic_remove(struct pci_dev *pdev);