From patchwork Tue May 7 06:32:51 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Kuo-Jung Su X-Patchwork-Id: 242017 X-Patchwork-Delegate: afleming@freescale.com Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Received: from theia.denx.de (theia.denx.de [85.214.87.163]) by ozlabs.org (Postfix) with ESMTP id 9717B2C00D2 for ; Tue, 7 May 2013 16:31:40 +1000 (EST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 614D94A159; Tue, 7 May 2013 08:31:39 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id bNN-XZ0mobig; Tue, 7 May 2013 08:31:39 +0200 (CEST) Received: from theia.denx.de (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 919F94A1FB; Tue, 7 May 2013 08:31:37 +0200 (CEST) Received: from localhost (localhost [127.0.0.1]) by theia.denx.de (Postfix) with ESMTP id 13FF34A1FB for ; Tue, 7 May 2013 08:31:31 +0200 (CEST) X-Virus-Scanned: Debian amavisd-new at theia.denx.de Received: from theia.denx.de ([127.0.0.1]) by localhost (theia.denx.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id dF-jms7ay28R for ; Tue, 7 May 2013 08:31:26 +0200 (CEST) X-policyd-weight: NOT_IN_SBL_XBL_SPAMHAUS=-1.5 NOT_IN_SPAMCOP=-1.5 NOT_IN_BL_NJABL=-1.5 (only DNSBL check requested) Received: from mail-da0-f45.google.com (mail-da0-f45.google.com [209.85.210.45]) by theia.denx.de (Postfix) with ESMTPS id 75B514A21E for ; Tue, 7 May 2013 08:31:17 +0200 (CEST) Received: by mail-da0-f45.google.com with SMTP id w3so148732dad.32 for ; Mon, 06 May 2013 23:31:16 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20120113; h=x-received:from:to:cc:subject:date:message-id:x-mailer:in-reply-to :references; bh=eVRbb8XQieibiMxTfa7a3aJCkMGZX84RsCCb1eOlDFg=; b=Z6ajconJQRkCepF619/0BvSanD1otMVsGS3adauqjCx7wboxN76P8aSwhndCiWdFIC PzKJkHmVYFIcy5Ryhi4UMFAQKKBXI1cdQ3e076ijjnaLA5x7w5kcotyp/vKjyyYvTYx4 4hnxCsLlQIhoDZ53GXUO+iAvPwcU9DQHaFFhwJ+1Sc/IdH6LxHyGeLbR3GGEWd64AwAx vjbfWNnNxmDT6tqB+Fq72HlOWN1PM4kB80yzfC7VdpWFwYw23fyHB6pOqhTfn8s/HCmt I8B574jZQnOE1s+yq+Zv5+9j2cVJzU+wxPUkOJQdpg5pSGOkV4DwtLkWplUqU4scGGSs scNQ== X-Received: by 10.66.138.75 with SMTP id qo11mr1286106pab.172.1367908276220; Mon, 06 May 2013 23:31:16 -0700 (PDT) Received: from localhost.localdomain ([220.132.37.35]) by mx.google.com with ESMTPSA id bl3sm2205078pbd.12.2013.05.06.23.31.14 for (version=TLSv1 cipher=DES-CBC3-SHA bits=168/168); Mon, 06 May 2013 23:31:15 -0700 (PDT) From: Kuo-Jung Su To: u-boot@lists.denx.de Date: Tue, 7 May 2013 14:32:51 +0800 Message-Id: <1367908371-12100-1-git-send-email-dantesu@gmail.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1366963360-2987-7-git-send-email-dantesu@gmail.com> References: <1366963360-2987-7-git-send-email-dantesu@gmail.com> Cc: Andy Fleming , Kuo-Jung Su Subject: [U-Boot] [PATCH v4] mmc: update Faraday FTSDC010 for rw performance X-BeenThere: u-boot@lists.denx.de X-Mailman-Version: 2.1.11 Precedence: list List-Id: U-Boot discussion List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Sender: u-boot-bounces@lists.denx.de Errors-To: u-boot-bounces@lists.denx.de From: Kuo-Jung Su Faraday FTSDC010 is a MMC/SD host controller. Although there is already a driver in current u-boot release, which is modified from eSHDC and contributed by Andes Tech. Its performance is too terrible on Faraday A36x SoC platforms, so I turn to implement this new version of driver which is 10+ times faster than the old one. It's carefully designed to be compatible with Andes chips, so it should be safe to replace it. Signed-off-by: Kuo-Jung Su CC: Andy Fleming --- Changes for v4: - Make it a separate patch, rather then a part of Faraday A36x patch series - Drop the faraday/mmc.h to remove dependency to Faraday A36x patch series. - Merge high clock (> 25MHz) setting for SD into ftsdc010_clkset() - Use only named constants for bit mask/shift - Use macro constants for timeout control Changes for v3: - Drop macros for wirtel()/readl(), call them directly. - Always insert a blank line between declarations and code. - Replace all the infinite wait loop with a timeout. - Add '__iomem' to all the declaration of HW register pointers. - Replace ftsdc010_esdhc.c with this patch. Changes for v2: - Coding Style cleanup. - Use readl(), writel(), clrsetbits_le32() to replace REG() macros. - Use structure based hardware registers to replace the macro constants. - Replace BIT() with BIT_MASK(). drivers/mmc/Makefile | 2 +- drivers/mmc/ftsdc010_esdhc.c | 687 ------------------------------------------ drivers/mmc/ftsdc010_mci.c | 377 +++++++++++++++++++++++ include/faraday/ftsdc010.h | 31 +- 4 files changed, 400 insertions(+), 697 deletions(-) delete mode 100644 drivers/mmc/ftsdc010_esdhc.c create mode 100644 drivers/mmc/ftsdc010_mci.c -- 1.7.9.5 diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index 1d6faa2..2f07168 100644 --- a/drivers/mmc/Makefile +++ b/drivers/mmc/Makefile @@ -32,7 +32,7 @@ endif COBJS-$(CONFIG_BFIN_SDH) += bfin_sdh.o COBJS-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o COBJS-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o -COBJS-$(CONFIG_FTSDC010) += ftsdc010_esdhc.o +COBJS-$(CONFIG_FTSDC010) += ftsdc010_mci.o COBJS-$(CONFIG_GENERIC_MMC) += mmc.o COBJS-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o diff --git a/drivers/mmc/ftsdc010_esdhc.c b/drivers/mmc/ftsdc010_esdhc.c deleted file mode 100644 index 42f0e0c..0000000 --- a/drivers/mmc/ftsdc010_esdhc.c +++ /dev/null @@ -1,687 +0,0 @@ -/* - * Copyright (C) 2011 Andes Technology Corporation - * Macpaul Lin, Andes Technology Corporation - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#include -#include - -/* - * supported mmc hosts - * setting the number CONFIG_FTSDC010_NUMBER in your configuration file. - */ -static struct mmc ftsdc010_dev[CONFIG_FTSDC010_NUMBER]; -static struct mmc_host ftsdc010_host[CONFIG_FTSDC010_NUMBER]; - -static struct ftsdc010_mmc *ftsdc010_get_base_mmc(int dev_index) -{ - return (struct ftsdc010_mmc *)CONFIG_FTSDC010_BASE + dev_index; -} - -#ifdef DEBUG -static void ftsdc010_dump_reg(struct mmc_host *host) -{ - debug("cmd: %08x\n", readl(&host->reg->cmd)); - debug("argu: %08x\n", readl(&host->reg->argu)); - debug("rsp0: %08x\n", readl(&host->reg->rsp0)); - debug("rsp1: %08x\n", readl(&host->reg->rsp1)); - debug("rsp2: %08x\n", readl(&host->reg->rsp2)); - debug("rsp3: %08x\n", readl(&host->reg->rsp3)); - debug("rsp_cmd: %08x\n", readl(&host->reg->rsp_cmd)); - debug("dcr: %08x\n", readl(&host->reg->dcr)); - debug("dtr: %08x\n", readl(&host->reg->dtr)); - debug("dlr: %08x\n", readl(&host->reg->dlr)); - debug("status: %08x\n", readl(&host->reg->status)); - debug("clr: %08x\n", readl(&host->reg->clr)); - debug("int_mask: %08x\n", readl(&host->reg->int_mask)); - debug("pcr: %08x\n", readl(&host->reg->pcr)); - debug("ccr: %08x\n", readl(&host->reg->ccr)); - debug("bwr: %08x\n", readl(&host->reg->bwr)); - debug("dwr: %08x\n", readl(&host->reg->dwr)); - debug("feature: %08x\n", readl(&host->reg->feature)); - debug("rev: %08x\n", readl(&host->reg->rev)); -} -#endif - -static unsigned int enable_imask(struct ftsdc010_mmc *reg, unsigned int imask) -{ - unsigned int newmask; - - newmask = readl(®->int_mask); - newmask |= imask; - - writel(newmask, ®->int_mask); - - return newmask; -} - -static void ftsdc010_pio_read(struct mmc_host *host, char *buf, unsigned int size) -{ - unsigned int fifo; - unsigned int fifo_words; - unsigned int *ptr; - unsigned int status; - unsigned int retry = 0; - - /* get_data_buffer */ - ptr = (unsigned int *)buf; - - while (size) { - status = readl(&host->reg->status); - debug("%s: size: %08x\n", __func__, size); - - if (status & FTSDC010_STATUS_FIFO_ORUN) { - - debug("%s: FIFO OVERRUN: sta: %08x\n", - __func__, status); - - fifo = host->fifo_len > size ? - size : host->fifo_len; - - size -= fifo; - - fifo_words = fifo >> 2; - - while (fifo_words--) - *ptr++ = readl(&host->reg->dwr); - - /* - * for adding some delays for SD card to put - * data into FIFO again - */ - udelay(4*FTSDC010_DELAY_UNIT); - -#ifdef CONFIG_FTSDC010_SDIO - /* sdio allow non-power-of-2 blksz */ - if (fifo & 3) { - unsigned int n = fifo & 3; - unsigned int data = readl(&host->reg->dwr); - - unsigned char *p = (unsigned char *)ptr; - - while (n--) { - *p++ = data; - data >>= 8; - } - } -#endif - } else { - udelay(1); - if (++retry >= FTSDC010_PIO_RETRY) { - debug("%s: PIO_RETRY timeout\n", __func__); - return; - } - } - } -} - -static void ftsdc010_pio_write(struct mmc_host *host, const char *buf, - unsigned int size) -{ - unsigned int fifo; - unsigned int *ptr; - unsigned int status; - unsigned int retry = 0; - - /* get data buffer */ - ptr = (unsigned int *)buf; - - while (size) { - status = readl(&host->reg->status); - - if (status & FTSDC010_STATUS_FIFO_URUN) { - fifo = host->fifo_len > size ? - size : host->fifo_len; - - size -= fifo; - - fifo = (fifo + 3) >> 2; - - while (fifo--) { - writel(*ptr, &host->reg->dwr); - ptr++; - } - } else { - udelay(1); - if (++retry >= FTSDC010_PIO_RETRY) { - debug("%s: PIO_RETRY timeout\n", __func__); - return; - } - } - } -} - -static int ftsdc010_check_rsp(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - unsigned int sta, clear; - - sta = readl(&host->reg->status); - debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx); - - /* check RSP TIMEOUT or FAIL */ - if (sta & FTSDC010_STATUS_RSP_TIMEOUT) { - /* RSP TIMEOUT */ - debug("%s: RSP timeout: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_CLR_RSP_TIMEOUT; - writel(clear, &host->reg->clr); - - return TIMEOUT; - } else if (sta & FTSDC010_STATUS_RSP_CRC_FAIL) { - /* clear response fail bit */ - debug("%s: RSP CRC FAIL: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_CLR_RSP_CRC_FAIL; - writel(clear, &host->reg->clr); - - return COMM_ERR; - } else if (sta & FTSDC010_STATUS_RSP_CRC_OK) { - - /* clear response CRC OK bit */ - clear |= FTSDC010_CLR_RSP_CRC_OK; - } - - writel(clear, &host->reg->clr); - return 0; -} - -static int ftsdc010_check_data(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - unsigned int sta, clear; - - sta = readl(&host->reg->status); - debug("%s: sta: %08x cmd %d\n", __func__, sta, cmd->cmdidx); - - /* check DATA TIMEOUT or FAIL */ - if (data) { - - /* Transfer Complete */ - if (sta & FTSDC010_STATUS_DATA_END) - clear |= FTSDC010_STATUS_DATA_END; - - /* Data CRC_OK */ - if (sta & FTSDC010_STATUS_DATA_CRC_OK) - clear |= FTSDC010_STATUS_DATA_CRC_OK; - - /* DATA TIMEOUT or DATA CRC FAIL */ - if (sta & FTSDC010_STATUS_DATA_TIMEOUT) { - /* DATA TIMEOUT */ - debug("%s: DATA TIMEOUT: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_STATUS_DATA_TIMEOUT; - writel(clear, &host->reg->clr); - - return TIMEOUT; - } else if (sta & FTSDC010_STATUS_DATA_CRC_FAIL) { - /* DATA CRC FAIL */ - debug("%s: DATA CRC FAIL: sta: %08x\n", __func__, sta); - - clear |= FTSDC010_STATUS_DATA_CRC_FAIL; - writel(clear, &host->reg->clr); - - return COMM_ERR; - } - writel(clear, &host->reg->clr); - } - return 0; -} - -static int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - -#ifdef CONFIG_FTSDC010_SDIO - unsigned int scon; -#endif - unsigned int ccon; - unsigned int mask, tmpmask; - unsigned int ret; - unsigned int sta, i; - - ret = 0; - - if (data) - mask = FTSDC010_INT_MASK_RSP_TIMEOUT; - else if (cmd->resp_type & MMC_RSP_PRESENT) - mask = FTSDC010_INT_MASK_RSP_TIMEOUT; - else - mask = FTSDC010_INT_MASK_CMD_SEND; - - /* write argu reg */ - debug("%s: argu: %08x\n", __func__, host->reg->argu); - writel(cmd->cmdarg, &host->reg->argu); - - /* setup commnad */ - ccon = FTSDC010_CMD_IDX(cmd->cmdidx); - - /* setup command flags */ - ccon |= FTSDC010_CMD_CMD_EN; - - /* - * This hardware didn't support specific commands for mapping - * MMC_RSP_BUSY and MMC_RSP_OPCODE. Hence we don't deal with it. - */ - if (cmd->resp_type & MMC_RSP_PRESENT) { - ccon |= FTSDC010_CMD_NEED_RSP; - mask |= FTSDC010_INT_MASK_RSP_CRC_OK | - FTSDC010_INT_MASK_RSP_CRC_FAIL; - } - - if (cmd->resp_type & MMC_RSP_136) - ccon |= FTSDC010_CMD_LONG_RSP; - - /* In Linux driver, MMC_CMD_APP_CMD is checked in last_opcode */ - if (host->last_opcode == MMC_CMD_APP_CMD) - ccon |= FTSDC010_CMD_APP_CMD; - -#ifdef CONFIG_FTSDC010_SDIO - scon = readl(&host->reg->sdio_ctrl1); - if (host->card_type == MMC_TYPE_SDIO) - scon |= FTSDC010_SDIO_CTRL1_SDIO_ENABLE; - else - scon &= ~FTSDC010_SDIO_CTRL1_SDIO_ENABLE; - writel(scon, &host->reg->sdio_ctrl1); -#endif - - /* record last opcode for specifing the command type to hardware */ - host->last_opcode = cmd->cmdidx; - - /* write int_mask reg */ - tmpmask = readl(&host->reg->int_mask); - tmpmask |= mask; - writel(tmpmask, &host->reg->int_mask); - - /* write cmd reg */ - debug("%s: ccon: %08x\n", __func__, ccon); - writel(ccon, &host->reg->cmd); - - /* check CMD_SEND */ - for (i = 0; i < FTSDC010_CMD_RETRY; i++) { - /* - * If we read status register too fast - * will lead hardware error and the RSP_TIMEOUT - * flag will be raised incorrectly. - */ - udelay(16*FTSDC010_DELAY_UNIT); - sta = readl(&host->reg->status); - - /* Command Complete */ - /* - * Note: - * Do not clear FTSDC010_CLR_CMD_SEND flag. - * (by writing FTSDC010_CLR_CMD_SEND bit to clear register) - * It will make the driver becomes very slow. - * If the operation hasn't been finished, hardware will - * clear this bit automatically. - * In origin, the driver will clear this flag if there is - * no data need to be read. - */ - if (sta & FTSDC010_STATUS_CMD_SEND) - break; - } - - if (i > FTSDC010_CMD_RETRY) { - printf("%s: send command timeout\n", __func__); - return TIMEOUT; - } - - /* check rsp status */ - ret = ftsdc010_check_rsp(mmc, cmd, data); - if (ret) - return ret; - - /* read response if we have RSP_OK */ - if (ccon & FTSDC010_CMD_LONG_RSP) { - cmd->response[0] = readl(&host->reg->rsp3); - cmd->response[1] = readl(&host->reg->rsp2); - cmd->response[2] = readl(&host->reg->rsp1); - cmd->response[3] = readl(&host->reg->rsp0); - } else { - cmd->response[0] = readl(&host->reg->rsp0); - } - - /* read/write data */ - if (data && (data->flags & MMC_DATA_READ)) { - ftsdc010_pio_read(host, data->dest, - data->blocksize * data->blocks); - } else if (data && (data->flags & MMC_DATA_WRITE)) { - ftsdc010_pio_write(host, data->src, - data->blocksize * data->blocks); - } - - /* check data status */ - if (data) { - ret = ftsdc010_check_data(mmc, cmd, data); - if (ret) - return ret; - } - - udelay(FTSDC010_DELAY_UNIT); - return ret; -} - -static unsigned int cal_blksz(unsigned int blksz) -{ - unsigned int blksztwo = 0; - - while (blksz >>= 1) - blksztwo++; - - return blksztwo; -} - -static int ftsdc010_setup_data(struct mmc *mmc, struct mmc_data *data) -{ - struct mmc_host *host = mmc->priv; - unsigned int dcon, newmask; - - /* configure data transfer paramter */ - if (!data) - return 0; - - if (((data->blocksize - 1) & data->blocksize) != 0) { - printf("%s: can't do non-power-of 2 sized block transfers" - " (blksz %d)\n", __func__, data->blocksize); - return -1; - } - - /* - * We cannot deal with unaligned blocks with more than - * one block being transfered. - */ - if ((data->blocksize <= 2) && (data->blocks > 1)) { - printf("%s: can't do non-word sized block transfers" - " (blksz %d)\n", __func__, data->blocksize); - return -1; - } - - /* data length */ - dcon = data->blocksize * data->blocks; - writel(dcon, &host->reg->dlr); - - /* write data control */ - dcon = cal_blksz(data->blocksize); - - /* add to IMASK register */ - newmask = (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT); - - /* - * enable UNDERRUN will trigger interrupt immediatedly - * So setup it when rsp is received successfully - */ - if (data->flags & MMC_DATA_WRITE) { - dcon |= FTSDC010_DCR_DATA_WRITE; - } else { - dcon &= ~FTSDC010_DCR_DATA_WRITE; - newmask |= FTSDC010_STATUS_FIFO_ORUN; - } - enable_imask(host->reg, newmask); - -#ifdef CONFIG_FTSDC010_SDIO - /* always reset fifo since last transfer may fail */ - dcon |= FTSDC010_DCR_FIFO_RST; - - if (data->blocks > 1) - dcon |= FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE; -#endif - - /* enable data transfer which will be pended until cmd is send */ - dcon |= FTSDC010_DCR_DATA_EN; - writel(dcon, &host->reg->dcr); - - return 0; -} - -static int ftsdc010_send_request(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - int ret; - - if (data) { - ret = ftsdc010_setup_data(mmc, data); - - if (ret) { - printf("%s: setup data error\n", __func__); - return -1; - } - - if ((data->flags & MMC_DATA_BOTH_DIR) == MMC_DATA_BOTH_DIR) { - printf("%s: data is both direction\n", __func__); - return -1; - } - } - - /* Send command */ - ret = ftsdc010_send_cmd(mmc, cmd, data); - return ret; -} - -static int ftsdc010_card_detect(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned int sta; - - sta = readl(&host->reg->status); - debug("%s: card status: %08x\n", __func__, sta); - - return (sta & FTSDC010_STATUS_CARD_DETECT) ? 0 : 1; -} - -static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd, - struct mmc_data *data) -{ - int ret; - - if (ftsdc010_card_detect(mmc) == 0) { - printf("%s: no medium present\n", __func__); - return -1; - } else { - ret = ftsdc010_send_request(mmc, cmd, data); - return ret; - } -} - -static void ftsdc010_set_clk(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned char clk_div; - unsigned int real_rate; - unsigned int clock; - - debug("%s: mmc_set_clock: %x\n", __func__, mmc->clock); - clock = readl(&host->reg->ccr); - - if (mmc->clock == 0) { - real_rate = 0; - clock |= FTSDC010_CCR_CLK_DIS; - } else { - debug("%s, mmc->clock: %08x, origin clock: %08x\n", - __func__, mmc->clock, clock); - - for (clk_div = 0; clk_div <= 127; clk_div++) { - real_rate = (CONFIG_SYS_CLK_FREQ / 2) / - (2 * (clk_div + 1)); - - if (real_rate <= mmc->clock) - break; - } - - debug("%s: computed real_rate: %x, clk_div: %x\n", - __func__, real_rate, clk_div); - - if (clk_div > 127) - debug("%s: no match clock rate, %x\n", - __func__, mmc->clock); - - clock = (clock & ~FTSDC010_CCR_CLK_DIV(0x7f)) | - FTSDC010_CCR_CLK_DIV(clk_div); - - clock &= ~FTSDC010_CCR_CLK_DIS; - } - - debug("%s, set clock: %08x\n", __func__, clock); - writel(clock, &host->reg->ccr); -} - -static void ftsdc010_set_ios(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned int power; - unsigned long val; - unsigned int bus_width; - - debug("%s: bus_width: %x, clock: %d\n", - __func__, mmc->bus_width, mmc->clock); - - /* set pcr: power on */ - power = readl(&host->reg->pcr); - power |= FTSDC010_PCR_POWER_ON; - writel(power, &host->reg->pcr); - - if (mmc->clock) - ftsdc010_set_clk(mmc); - - /* set bwr: bus width reg */ - bus_width = readl(&host->reg->bwr); - bus_width &= ~(FTSDC010_BWR_WIDE_8_BUS | FTSDC010_BWR_WIDE_4_BUS | - FTSDC010_BWR_SINGLE_BUS); - - if (mmc->bus_width == 8) - bus_width |= FTSDC010_BWR_WIDE_8_BUS; - else if (mmc->bus_width == 4) - bus_width |= FTSDC010_BWR_WIDE_4_BUS; - else - bus_width |= FTSDC010_BWR_SINGLE_BUS; - - writel(bus_width, &host->reg->bwr); - - /* set fifo depth */ - val = readl(&host->reg->feature); - host->fifo_len = FTSDC010_FEATURE_FIFO_DEPTH(val) * 4; /* 4 bytes */ - - /* set data timeout register */ - val = -1; - writel(val, &host->reg->dtr); -} - -static void ftsdc010_reset(struct mmc_host *host) -{ - unsigned int timeout; - unsigned int sta; - - /* Do SDC_RST: Software reset for all register */ - writel(FTSDC010_CMD_SDC_RST, &host->reg->cmd); - - host->clock = 0; - - /* this hardware has no reset finish flag to read */ - /* wait 100ms maximum */ - timeout = 100; - - /* hw clears the bit when it's done */ - while (readl(&host->reg->dtr) != 0) { - if (timeout == 0) { - printf("%s: reset timeout error\n", __func__); - return; - } - timeout--; - udelay(10*FTSDC010_DELAY_UNIT); - } - - sta = readl(&host->reg->status); - if (sta & FTSDC010_STATUS_CARD_CHANGE) - writel(FTSDC010_CLR_CARD_CHANGE, &host->reg->clr); -} - -static int ftsdc010_core_init(struct mmc *mmc) -{ - struct mmc_host *host = mmc->priv; - unsigned int mask; - unsigned int major, minor, revision; - - /* get hardware version */ - host->version = readl(&host->reg->rev); - - major = FTSDC010_REV_MAJOR(host->version); - minor = FTSDC010_REV_MINOR(host->version); - revision = FTSDC010_REV_REVISION(host->version); - - printf("ftsdc010 hardware ver: %d_%d_r%d\n", major, minor, revision); - - /* Interrupt MASK register init - mask all */ - writel(0x0, &host->reg->int_mask); - - mask = FTSDC010_INT_MASK_CMD_SEND | - FTSDC010_INT_MASK_DATA_END | - FTSDC010_INT_MASK_CARD_CHANGE; -#ifdef CONFIG_FTSDC010_SDIO - mask |= FTSDC010_INT_MASK_CP_READY | - FTSDC010_INT_MASK_CP_BUF_READY | - FTSDC010_INT_MASK_PLAIN_TEXT_READY | - FTSDC010_INT_MASK_SDIO_IRPT; -#endif - - writel(mask, &host->reg->int_mask); - - return 0; -} - -int ftsdc010_mmc_init(int dev_index) -{ - struct mmc *mmc; - struct mmc_host *host; - - mmc = &ftsdc010_dev[dev_index]; - - sprintf(mmc->name, "FTSDC010 SD/MMC"); - mmc->priv = &ftsdc010_host[dev_index]; - mmc->send_cmd = ftsdc010_request; - mmc->set_ios = ftsdc010_set_ios; - mmc->init = ftsdc010_core_init; - mmc->getcd = NULL; - mmc->getwp = NULL; - - mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; - - mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT; - - mmc->f_min = CONFIG_SYS_CLK_FREQ / 2 / (2*128); - mmc->f_max = CONFIG_SYS_CLK_FREQ / 2 / 2; - - ftsdc010_host[dev_index].clock = 0; - ftsdc010_host[dev_index].reg = ftsdc010_get_base_mmc(dev_index); - mmc_register(mmc); - - /* reset mmc */ - host = (struct mmc_host *)mmc->priv; - ftsdc010_reset(host); - - return 0; -} diff --git a/drivers/mmc/ftsdc010_mci.c b/drivers/mmc/ftsdc010_mci.c new file mode 100644 index 0000000..562b14a --- /dev/null +++ b/drivers/mmc/ftsdc010_mci.c @@ -0,0 +1,377 @@ +/* + * Faraday MMC/SD Host Controller + * + * (C) Copyright 2010 Faraday Technology + * Dante Su + * + * This file is released under the terms of GPL v2 and any later version. + * See the file COPYING in the root directory of the source tree for details. + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#define CFG_CMD_TIMEOUT (CONFIG_SYS_HZ >> 4) /* 250 ms */ +#define CFG_RST_TIMEOUT CONFIG_SYS_HZ /* 1 sec reset timeout */ + +struct ftsdc010_chip { + void __iomem *regs; + uint32_t wprot; /* write protected (locked) */ + uint32_t rate; /* actual SD clock in Hz */ + uint32_t sclk; /* FTSDC010 source clock in Hz */ + uint32_t fifo; /* fifo depth in bytes */ + uint32_t acmd; +}; + +static inline int ftsdc010_send_cmd(struct mmc *mmc, struct mmc_cmd *mmc_cmd) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + int ret = TIMEOUT; + uint32_t ts, st; + uint32_t cmd = FTSDC010_CMD_IDX(mmc_cmd->cmdidx); + uint32_t arg = mmc_cmd->cmdarg; + uint32_t flags = mmc_cmd->resp_type; + + cmd |= FTSDC010_CMD_CMD_EN; + + if (chip->acmd) { + cmd |= FTSDC010_CMD_APP_CMD; + chip->acmd = 0; + } + + if (flags & MMC_RSP_PRESENT) + cmd |= FTSDC010_CMD_NEED_RSP; + + if (flags & MMC_RSP_136) + cmd |= FTSDC010_CMD_LONG_RSP; + + writel(FTSDC010_STATUS_RSP_MASK | FTSDC010_STATUS_CMD_SEND, + ®s->clr); + writel(arg, ®s->argu); + writel(cmd, ®s->cmd); + + if (!(flags & (MMC_RSP_PRESENT | MMC_RSP_136))) { + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + if (readl(®s->status) & FTSDC010_STATUS_CMD_SEND) { + writel(FTSDC010_STATUS_CMD_SEND, ®s->clr); + ret = 0; + break; + } + } + } else { + st = 0; + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + st = readl(®s->status); + writel(st & FTSDC010_STATUS_RSP_MASK, ®s->clr); + if (st & FTSDC010_STATUS_RSP_MASK) + break; + } + if (st & FTSDC010_STATUS_RSP_CRC_OK) { + if (flags & MMC_RSP_136) { + mmc_cmd->response[0] = readl(®s->rsp3); + mmc_cmd->response[1] = readl(®s->rsp2); + mmc_cmd->response[2] = readl(®s->rsp1); + mmc_cmd->response[3] = readl(®s->rsp0); + } else { + mmc_cmd->response[0] = readl(®s->rsp0); + } + ret = 0; + } else { + debug("ftsdc010: rsp err (cmd=%d, st=0x%x)\n", + mmc_cmd->cmdidx, st); + } + } + + if (ret) { + debug("ftsdc010: cmd timeout (op code=%d)\n", + mmc_cmd->cmdidx); + } else if (mmc_cmd->cmdidx == MMC_CMD_APP_CMD) { + chip->acmd = 1; + } + + return ret; +} + +static void ftsdc010_clkset(struct mmc *mmc, uint32_t rate) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + uint32_t div; + + for (div = 0; div < 0x7f; ++div) { + if (rate >= chip->sclk / (2 * (div + 1))) + break; + } + chip->rate = chip->sclk / (2 * (div + 1)); + + writel(FTSDC010_CCR_CLK_DIV(div), ®s->ccr); + + if (IS_SD(mmc)) { + setbits_le32(®s->ccr, FTSDC010_CCR_CLK_SD); + + if (chip->rate > 25000000) + setbits_le32(®s->ccr, FTSDC010_CCR_CLK_HISPD); + else + clrbits_le32(®s->ccr, FTSDC010_CCR_CLK_HISPD); + } +} + +static inline int ftsdc010_is_ro(struct mmc *mmc) +{ + struct ftsdc010_chip *chip = mmc->priv; + const uint8_t *csd = (const uint8_t *)mmc->csd; + + return chip->wprot || (csd[1] & 0x30); +} + +static int ftsdc010_wait(struct ftsdc010_mmc __iomem *regs, uint32_t mask) +{ + int ret = TIMEOUT; + uint32_t st, ts; + + for (ts = get_timer(0); get_timer(ts) < CFG_CMD_TIMEOUT; ) { + st = readl(®s->status); + if (!(st & mask)) + continue; + writel(st & mask, ®s->clr); + ret = 0; + break; + } + + if (ret) + debug("ftsdc010: wait st(0x%x) timeout\n", mask); + + return ret; +} + +/* + * u-boot mmc api + */ + +static int ftsdc010_request(struct mmc *mmc, struct mmc_cmd *cmd, + struct mmc_data *data) +{ + int ret = UNUSABLE_ERR; + uint32_t len = 0; + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + + if (data && (data->flags & MMC_DATA_WRITE) && chip->wprot) { + printf("ftsdc010: the card is write protected!\n"); + return ret; + } + + if (data) { + uint32_t dcr; + + len = data->blocksize * data->blocks; + + /* 1. data disable + fifo reset */ + writel(FTSDC010_DCR_FIFO_RST, ®s->dcr); + + /* 2. clear status register */ + writel(FTSDC010_STATUS_DATA_MASK | FTSDC010_STATUS_FIFO_URUN + | FTSDC010_STATUS_FIFO_ORUN, ®s->clr); + + /* 3. data timeout (1 sec) */ + writel(chip->rate, ®s->dtr); + + /* 4. data length (bytes) */ + writel(len, ®s->dlr); + + /* 5. data enable */ + dcr = (ffs(data->blocksize) - 1) | FTSDC010_DCR_DATA_EN; + if (data->flags & MMC_DATA_WRITE) + dcr |= FTSDC010_DCR_DATA_WRITE; + writel(dcr, ®s->dcr); + } + + ret = ftsdc010_send_cmd(mmc, cmd); + if (ret) { + printf("ftsdc010: CMD%d failed\n", cmd->cmdidx); + return ret; + } + + if (!data) + return ret; + + if (data->flags & MMC_DATA_WRITE) { + const uint8_t *buf = (const uint8_t *)data->src; + + while (len > 0) { + int wlen; + + /* wait for tx ready */ + ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_URUN); + if (ret) + break; + + /* write bytes to ftsdc010 */ + for (wlen = 0; wlen < len && wlen < chip->fifo; ) { + writel(*(uint32_t *)buf, ®s->dwr); + buf += 4; + wlen += 4; + } + + len -= wlen; + } + + } else { + uint8_t *buf = (uint8_t *)data->dest; + + while (len > 0) { + int rlen; + + /* wait for rx ready */ + ret = ftsdc010_wait(regs, FTSDC010_STATUS_FIFO_ORUN); + if (ret) + break; + + /* fetch bytes from ftsdc010 */ + for (rlen = 0; rlen < len && rlen < chip->fifo; ) { + *(uint32_t *)buf = readl(®s->dwr); + buf += 4; + rlen += 4; + } + + len -= rlen; + } + + } + + if (!ret) { + ret = ftsdc010_wait(regs, + FTSDC010_STATUS_DATA_END | FTSDC010_STATUS_DATA_ERROR); + } + + return ret; +} + +static void ftsdc010_set_ios(struct mmc *mmc) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + + ftsdc010_clkset(mmc, mmc->clock); + + clrbits_le32(®s->bwr, FTSDC010_BWR_MODE_MASK); + switch (mmc->bus_width) { + case 4: + setbits_le32(®s->bwr, FTSDC010_BWR_MODE_4BIT); + break; + case 8: + setbits_le32(®s->bwr, FTSDC010_BWR_MODE_8BIT); + break; + default: + setbits_le32(®s->bwr, FTSDC010_BWR_MODE_1BIT); + break; + } +} + +static int ftsdc010_init(struct mmc *mmc) +{ + struct ftsdc010_chip *chip = mmc->priv; + struct ftsdc010_mmc __iomem *regs = chip->regs; + uint32_t ts; + + if (readl(®s->status) & FTSDC010_STATUS_CARD_DETECT) + return NO_CARD_ERR; + + if (readl(®s->status) & FTSDC010_STATUS_WRITE_PROT) { + printf("ftsdc010: write protected\n"); + chip->wprot = 1; + } + + chip->fifo = (readl(®s->feature) & 0xff) << 2; + + /* 1. chip reset */ + writel(FTSDC010_CMD_SDC_RST, ®s->cmd); + for (ts = get_timer(0); get_timer(ts) < CFG_RST_TIMEOUT; ) { + if (readl(®s->cmd) & FTSDC010_CMD_SDC_RST) + continue; + break; + } + if (readl(®s->cmd) & FTSDC010_CMD_SDC_RST) { + printf("ftsdc010: reset failed\n"); + return UNUSABLE_ERR; + } + + /* 2. enter low speed mode (400k card detection) */ + ftsdc010_clkset(mmc, 400000); + + /* 3. interrupt disabled */ + writel(0, ®s->int_mask); + + return 0; +} + +int ftsdc010_mmc_init(int devid) +{ + struct mmc *mmc; + struct ftsdc010_chip *chip; + struct ftsdc010_mmc __iomem *regs; +#ifdef CONFIG_FTSDC010_BASE_LIST + uint32_t base_list[] = CONFIG_FTSDC010_BASE_LIST; + + if (devid < 0 || devid >= ARRAY_SIZE(base_list)) + return -1; + regs = (void __iomem *)base_list[devid]; +#else + regs = (void __iomem *)(CONFIG_FTSDC010_BASE + (devid << 20)); +#endif + + mmc = malloc(sizeof(struct mmc)); + if (!mmc) + return -ENOMEM; + memset(mmc, 0, sizeof(struct mmc)); + + chip = malloc(sizeof(struct ftsdc010_chip)); + if (!chip) { + free(mmc); + return -ENOMEM; + } + memset(chip, 0, sizeof(struct ftsdc010_chip)); + + chip->regs = regs; + mmc->priv = chip; + + sprintf(mmc->name, "ftsdc010"); + mmc->send_cmd = ftsdc010_request; + mmc->set_ios = ftsdc010_set_ios; + mmc->init = ftsdc010_init; + + mmc->host_caps = MMC_MODE_HS | MMC_MODE_HS_52MHz; + switch (readl(®s->bwr) & FTSDC010_BWR_CAPS_MASK) { + case FTSDC010_BWR_CAPS_4BIT: + mmc->host_caps |= MMC_MODE_4BIT; + break; + case FTSDC010_BWR_CAPS_8BIT: + mmc->host_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT; + break; + default: + break; + } + +#ifdef CONFIG_SYS_CLK_FREQ + chip->sclk = CONFIG_SYS_CLK_FREQ; +#else + chip->sclk = clk_get_rate("SDC"); +#endif + + mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34; + mmc->f_max = chip->sclk / 2; + mmc->f_min = chip->sclk / 0x100; + mmc->block_dev.part_type = PART_TYPE_DOS; + + mmc_register(mmc); + + return 0; +} diff --git a/include/faraday/ftsdc010.h b/include/faraday/ftsdc010.h index c34dde7..8284f53 100644 --- a/include/faraday/ftsdc010.h +++ b/include/faraday/ftsdc010.h @@ -23,6 +23,7 @@ #define __FTSDC010_H #ifndef __ASSEMBLY__ + /* sd controller register */ struct ftsdc010_mmc { unsigned int cmd; /* 0x00 - command reg */ @@ -143,6 +144,15 @@ int ftsdc010_mmc_init(int dev_index); #define FTSDC010_STATUS_SDIO_IRPT (1 << 16) /* SDIO card intr */ #define FTSDC010_STATUS_DATA0_STATUS (1 << 17) #endif /* CONFIG_FTSDC010_SDIO */ +#define FTSDC010_STATUS_RSP_ERROR \ + (FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT) +#define FTSDC010_STATUS_RSP_MASK \ + (FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK) +#define FTSDC010_STATUS_DATA_ERROR \ + (FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT) +#define FTSDC010_STATUS_DATA_MASK \ + (FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \ + | FTSDC010_STATUS_DATA_END) /* 0x2c - clear register */ #define FTSDC010_CLR_RSP_CRC_FAIL (1 << 0) @@ -192,21 +202,24 @@ int ftsdc010_mmc_init(int dev_index); #define FTSDC010_CCR_CLK_DIV(x) (((x) & 0x7f) << 0) #define FTSDC010_CCR_CLK_SD (1 << 7) /* 0: MMC, 1: SD */ #define FTSDC010_CCR_CLK_DIS (1 << 8) +#define FTSDC010_CCR_CLK_HISPD (1 << 9) /* high speed */ /* card type */ #define FTSDC010_CARD_TYPE_SD FTSDC010_CLOCK_REG_CARD_TYPE #define FTSDC010_CARD_TYPE_MMC 0x0 /* 0x3c - bus width register */ -#define FTSDC010_BWR_SINGLE_BUS (1 << 0) -#define FTSDC010_BWR_WIDE_8_BUS (1 << 1) -#define FTSDC010_BWR_WIDE_4_BUS (1 << 2) -#define FTSDC010_BWR_WIDE_BUS_SUPPORT(x) (((x) >> 3) & 0x3) -#define FTSDC010_BWR_CARD_DETECT (1 << 5) - -#define FTSDC010_BWR_1_BUS_SUPPORT 0x0 -#define FTSDC010_BWR_4_BUS_SUPPORT 0x1 -#define FTSDC010_BWR_8_BUS_SUPPORT 0x2 +#define FTSDC010_BWR_MODE_1BIT (1 << 0) /* 1 bit mode enabled */ +#define FTSDC010_BWR_MODE_8BIT (1 << 1) /* 8 bit mode enabled */ +#define FTSDC010_BWR_MODE_4BIT (1 << 2) /* 4 bit mode enabled */ +#define FTSDC010_BWR_MODE_MASK (7 << 0) +#define FTSDC010_BWR_MODE_SHIFT (0) +#define FTSDC010_BWR_CAPS_1BIT (0 << 3) /* 1 bits mode supported */ +#define FTSDC010_BWR_CAPS_4BIT (1 << 3) /* 1,4 bits mode supported */ +#define FTSDC010_BWR_CAPS_8BIT (2 << 3) /* 1,4,8 bits mode supported */ +#define FTSDC010_BWR_CAPS_MASK (3 << 3) +#define FTSDC010_BWR_CAPS_SHIFT (3) +#define FTSDC010_BWR_CARD_DETECT (1 << 5) /* 0x44 or 0x9c - feature register */ #define FTSDC010_FEATURE_FIFO_DEPTH(x) (((x) >> 0) & 0xff)