new file mode 100644
@@ -0,0 +1,55 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(CPU).o
+
+src-y := cpu.o
+
+START = start.o
+COBJS = $(src-y)
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_NO_CPU_SUPPORT_CODE
+START :=
+endif
+endif
+
+SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(START) $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
new file mode 100644
@@ -0,0 +1,33 @@
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
+
+PLATFORM_CPPFLAGS += -march=armv4
+# =========================================================================
+#
+# Supply options according to compiler version
+#
+# =========================================================================
+PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
+PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
new file mode 100644
@@ -0,0 +1,280 @@
+/*
+ * arch/arm/cpu/faraday/cpu.c
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+/*
+ * CPU specific code
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <faraday/ftwdt010_wdt.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int cleanup_before_linux(void)
+{
+ /*
+ * this function is called just before we call linux
+ * it prepares the processor for linux
+ *
+ * we turn off caches etc ...
+ */
+
+ disable_interrupts();
+
+ /* turn off D-cache */
+ dcache_disable();
+
+ /* flush I-cache */
+ __asm__ __volatile__ (
+ "mov r3, #0\n"
+ "mcr p15, 0, r3, c7, c5, 0\n" /* invalidate i-cache all */
+ : /* output */
+ : /* input */
+ : "r3" /* clobber list */
+ );
+
+ return 0;
+}
+
+void arch_preboot_os(void)
+{
+ cleanup_before_linux();
+}
+
+#ifdef CONFIG_SYS_DCACHE_OFF
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+}
+
+#else
+
+void flush_dcache_all(void)
+{
+ __asm__ __volatile__ (
+ "mov r3,#0\n"
+ "mcr p15,0,r3,c7,c14,0\n" /* clean & invalidate d-cache all */
+ "mcr p15,0,r3,c7,c10,4\n" /* drain write buffer */
+ : /* output */
+ : /* input */
+ : "r3" /* clobber list */
+ );
+}
+
+void flush_dcache_range(unsigned long start, unsigned long stop)
+{
+ unsigned long align = CONFIG_SYS_CACHELINE_SIZE;
+ unsigned long mask = ~(align - 1);
+
+ /* aligned to cache line */
+ stop = (stop + (align - 1)) & mask;
+ start = start & mask;
+
+ __asm__ __volatile__ (
+ "1:\n"
+ "mcr p15,0,%0,c7,c14,1\n" /* clean & invalidate d-cache line */
+ "add %0,%0,%2\n"
+ "cmp %0,%1\n"
+ "blo 1b\n"
+ "mov r3,#0\n"
+ "mcr p15,0,r3,c7,c10,4\n" /* drain write buffer */
+ : "+r"(start) /* output */
+ : "r"(stop), "r"(align) /* input */
+ : "r3" /* clobber list */
+ );
+}
+
+void invalidate_dcache_range(unsigned long start, unsigned long stop)
+{
+ unsigned long align = CONFIG_SYS_CACHELINE_SIZE;
+ unsigned long mask = ~(align - 1);
+
+ /* aligned to cache line */
+ stop = (stop + (align - 1)) & mask;
+ start = start & mask;
+
+ __asm__ __volatile__ (
+ "1:\n"
+ "mcr p15,0,%0,c7,c6,1\n" /* invalidate cache line */
+ "add %0,%0,%2\n"
+ "cmp %0,%1\n"
+ "blo 1b\n"
+ : "+r"(start) /* output */
+ : "r"(stop), "r"(align) /* input */
+ );
+}
+
+void invalidate_dcache_all(void)
+{
+ __asm__ __volatile__ (
+ "mov r3,#0\n"
+ "mcr p15,0,r3,c7,c6,0\n" /* invalidate d-cache all */
+ : /* output */
+ : /* input */
+ : "r3" /* clobber list */
+ );
+}
+
+void invalidate_icache_all(void)
+{
+ __asm__ __volatile__ (
+ "mov r3,#0\n"
+ "mcr p15,0,r3,c7,c5,0\n" /* invalidate i-cache all */
+ : /* output */
+ : /* input */
+ : "r3" /* clobber list */
+ );
+}
+
+void flush_cache(unsigned long start, unsigned long size)
+{
+ flush_dcache_range(start, start + size);
+}
+
+#endif /* !defined(CONFIG_SYS_DCACHE_OFF) */
+
+void enable_caches(void)
+{
+ icache_enable();
+
+#if !defined(CONFIG_SYS_DCACHE_OFF)
+ if (gd->arch.cpu_mmu) {
+ puts("MMU: on\n");
+ dcache_enable();
+ } else
+#endif
+ puts("MMU: off\n");
+}
+
+#define CPUID_VID(x) (((x) >> 24) & 0xff)
+#define CPUID_ISA(x) (((x) >> 16) & 0xff)
+#define CPUID_PID(x) (((x) >> 4) & 0x0fff)
+#define CPUID_REV(x) ((x) & 0x0f) /* revision */
+#define CPUID_NOREV(x) (((x) >> 4) & 0x0fffffff)
+
+/* Vendor ID */
+#define CPUID_VID_ARM 0x41
+#define CPUID_VID_FARADAY 0x66
+
+/* Instruction Set Architecture */
+#define CPUID_ISA_ARMV4 0x01
+#define CPUID_ISA_ARMV5TE 0x05
+#define CPUID_ISA_ARMV5TEJ 0x06
+
+/* Faraday ARMv4 cores */
+#define CPUID_FA526 0x6601526
+#define CPUID_FA626 0x6601626
+
+/* Faraday ARMv5TE cores */
+#define CPUID_FA606TE 0x6605606
+#define CPUID_FA616TE 0x6605616
+#define CPUID_FA626TE 0x6605626
+#define CPUID_FA726TE 0x6605726
+
+#ifdef CONFIG_ARCH_CPU_INIT
+
+int arch_cpu_init(void)
+{
+ unsigned int id, ctr;
+
+ __asm__ __volatile__ (
+ "mrc p15, 0, %0, c0, c0, 0\n"
+ "mrc p15, 0, %1, c0, c0, 1\n"
+ : "=r"(id), "=r"(ctr) /* output */
+ : /* input */
+ );
+
+ gd->arch.cpu_id = id;
+
+ /* MMU/D-Cache */
+ switch (CPUID_NOREV(gd->arch.cpu_id)) {
+ case CPUID_FA606TE: /* FA606TE (no-mmu) */
+ /* Disable MMU/D-Cache */
+ gd->arch.cpu_mmu = 0;
+ break;
+ default:
+ /* Enable MMU/D-Cache */
+ gd->arch.cpu_mmu = 1;
+ break;
+ }
+
+ return 0;
+}
+#endif /* #ifdef CONFIG_ARCH_CPU_INIT */
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+int print_cpuinfo(void)
+{
+ char cpu_name[32];
+ uint vid = CPUID_VID(gd->arch.cpu_id);
+ uint pid = CPUID_PID(gd->arch.cpu_id);
+
+ /* build cpu_name */
+ switch (vid) {
+ case CPUID_VID_FARADAY: /* Faraday */
+ switch (CPUID_ISA(gd->arch.cpu_id)) {
+ case CPUID_ISA_ARMV5TE:
+ sprintf(cpu_name, "FA%xTE", pid);
+ break;
+ default:
+ sprintf(cpu_name, "FA%x", pid);
+ break;
+ }
+ break;
+ case CPUID_VID_ARM: /* ARM */
+ if ((pid & 0xff0) == 0xc00)
+ sprintf(cpu_name, "Cortex-A%u", (pid & 0x00f));
+ else if (pid >= 0xa00)
+ sprintf(cpu_name, "ARM%x", 0x1000 + (pid - 0xa00));
+ else
+ sprintf(cpu_name, "ARM%x", pid);
+ break;
+ default:
+ sprintf(cpu_name, "Unknown");
+ break;
+ }
+
+ /* print cpu_info */
+ printf("CPU: %s %u MHz\n",
+ cpu_name, (unsigned int)(clk_get_rate("CPU") / 1000000));
+
+ printf("AHB: %u MHz\n",
+ (unsigned int)(clk_get_rate("AHB") / 1000000));
+
+ printf("APB: %u MHz\n",
+ (unsigned int)(clk_get_rate("APB") / 1000000));
+
+ return 0;
+}
+#endif /* #ifdef CONFIG_DISPLAY_CPUINFO */
+
+void reset_cpu(unsigned long ignored)
+{
+#ifdef CONFIG_FTWDT010_BASE
+ struct ftwdt010_wdt __iomem *regs =
+ (struct ftwdt010_wdt __iomem *)CONFIG_FTWDT010_BASE;
+
+ /* Disable WDT */
+ writel(0, ®s->wdcr);
+ /* Timeout in 1000 ticks */
+ writel(1000, ®s->wdload);
+ /* Enable WDT with System Reset Function */
+ writel(FTWDT010_WDCR_ENABLE | FTWDT010_WDCR_RST, ®s->wdcr);
+ /* Kick it to make sure it's in running state */
+ writel(FTWDT010_WDRESTART_MAGIC, ®s->wdrestart);
+#endif
+}
new file mode 100644
@@ -0,0 +1,523 @@
+/*
+ * u-boot - Startup Code for Faraday CPU-core
+ *
+ * Base is arch/arm/cpu/arm926ejs/start.S
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <common.h>
+#include <version.h>
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+#ifdef CONFIG_SYS_DV_NOR_BOOT_CFG
+.globl _start
+_start:
+.globl _NOR_BOOT_CFG
+_NOR_BOOT_CFG:
+ .word CONFIG_SYS_DV_NOR_BOOT_CFG
+ b reset
+#else
+.globl _start
+_start:
+ b reset
+#endif
+#ifdef CONFIG_SPL_BUILD
+/* No exception handlers in preloader */
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+ ldr pc, _hang
+
+_hang:
+ .word do_hang
+/* pad to 64 byte boundary */
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+ .word 0x12345678
+#else
+ ldr pc, _undefined_instruction
+ ldr pc, _software_interrupt
+ ldr pc, _prefetch_abort
+ ldr pc, _data_abort
+ ldr pc, _not_used
+ ldr pc, _irq
+ ldr pc, _fiq
+
+_undefined_instruction:
+ .word undefined_instruction
+_software_interrupt:
+ .word software_interrupt
+_prefetch_abort:
+ .word prefetch_abort
+_data_abort:
+ .word data_abort
+_not_used:
+ .word not_used
+_irq:
+ .word irq
+_fiq:
+ .word fiq
+
+#endif /* CONFIG_SPL_BUILD */
+ .balignl 16,0xdeadbeef
+
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+.globl _TEXT_BASE
+_TEXT_BASE:
+#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
+ .word CONFIG_SPL_TEXT_BASE
+#else
+ .word CONFIG_SYS_TEXT_BASE
+#endif
+
+/*
+ * These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
+ */
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
+
+.globl _image_copy_end_ofs
+_image_copy_end_ofs:
+ .word __image_copy_end - _start
+
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word __bss_end - _start
+
+.globl _end_ofs
+_end_ofs:
+ .word _end - _start
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+#endif
+
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+ .word 0x0badc0de
+
+/*
+ * the actual reset code
+ */
+
+reset:
+ /*
+ * set the cpu to SVC32 mode
+ */
+ mrs r0,cpsr
+ bic r0,r0,#0x1f
+ orr r0,r0,#0xd3
+ msr cpsr,r0
+
+ /*
+ * we do sys-critical inits only at reboot,
+ * not when booting from ram!
+ */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ bl cpu_init_crit
+#endif
+
+ /*
+ * Relocate U-Boot to RAM
+ * It's copied from the old u-boot release.
+ */
+#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD)
+ adr r0, _start /* r0 <- current position of code */
+ ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
+ teq r0, r1 /* don't reloc during debug */
+ bleq rr_exit
+ ldr r2, _end_ofs /* r2 <- size of u-boot */
+ add r2, r0, r2 /* r2 <- source end address */
+
+rr_loop:
+ ldmia r0!, {r3-r10} /* copy from source address [r0] */
+ stmia r1!, {r3-r10} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ blo rr_loop
+
+ /* Adjust the pc to use the correct text address */
+ adr r0, _start
+ ldr r1, _TEXT_BASE
+ sub r2, pc, r0
+ add r2, r2, #4
+ add pc, r1, r2
+
+rr_exit:
+#endif /* #if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SPL_BUILD) */
+
+ bl _main
+
+/*---------------------------------------------------------------------*/
+
+/*
+ * void relocate_code(addr_moni)
+ *
+ * This function relocates the monitor code.
+ */
+ .globl relocate_code
+relocate_code:
+ mov r6, r0 /* save addr of destination */
+
+ adr r0, _start
+ subs r9, r6, r0 /* r9 <- relocation offset */
+ beq relocate_done /* skip relocation */
+ mov r1, r6 /* r1 <- scratch for copy loop */
+ ldr r3, _image_copy_end_ofs
+ add r2, r0, r3 /* r2 <- source end address */
+
+copy_loop:
+ ldmia r0!, {r10-r11} /* copy from source address [r0] */
+ stmia r1!, {r10-r11} /* copy to target address [r1] */
+ cmp r0, r2 /* until source end address [r2] */
+ blo copy_loop
+
+#ifndef CONFIG_SPL_BUILD
+ /*
+ * fix .rel.dyn relocations
+ */
+ ldr r0, _TEXT_BASE /* r0 <- Text base */
+ ldr r10, _dynsym_start_ofs /* r10 <- sym table ofs */
+ add r10, r10, r0 /* r10 <- sym table in FLASH */
+ ldr r2, _rel_dyn_start_ofs /* r2 <- rel dyn start ofs */
+ add r2, r2, r0 /* r2 <- rel dyn start in FLASH */
+ ldr r3, _rel_dyn_end_ofs /* r3 <- rel dyn end ofs */
+ add r3, r3, r0 /* r3 <- rel dyn end in FLASH */
+fixloop:
+ ldr r0, [r2] /* r0 <- location to fix up, IN FLASH! */
+ add r0, r0, r9 /* r0 <- location to fix up in RAM */
+ ldr r1, [r2, #4]
+ and r7, r1, #0xff
+ cmp r7, #23 /* relative fixup? */
+ beq fixrel
+ cmp r7, #2 /* absolute fixup? */
+ beq fixabs
+ /* ignore unknown type of fixup */
+ b fixnext
+fixabs:
+ /* absolute fix: set location to (offset) symbol value */
+ mov r1, r1, LSR #4 /* r1 <- symbol index in .dynsym */
+ add r1, r10, r1 /* r1 <- address of symbol in table */
+ ldr r1, [r1, #4] /* r1 <- symbol value */
+ add r1, r1, r9 /* r1 <- relocated sym addr */
+ b fixnext
+fixrel:
+ /* relative fix: increase location by offset */
+ ldr r1, [r0]
+ add r1, r1, r9
+fixnext:
+ str r1, [r0]
+ add r2, r2, #8 /* each rel.dyn entry is 8 bytes */
+ cmp r2, r3
+ blo fixloop
+#endif
+
+relocate_done:
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USE_IRQ)
+ /* adjust exception table */
+ adr r0, _undefined_instruction
+ adr r2, _TEXT_BASE
+ ldr r1, [r2]
+adjustex:
+ ldr r3, [r0]
+ sub r3, r3, r1
+ add r3, r6, r3 /* r6 -> relocaddr */
+ str r3, [r0], #4
+ cmp r0, r2
+ blo adjustex
+
+ /* relocate exception table */
+ adr r0, _start
+ ldr r1, =CONFIG_SYS_SDRAM_BASE
+ adr r2, _TEXT_BASE
+copyex:
+ ldr r3, [r0], #4 /* copy from source address [r0] */
+ str r3, [r1], #4 /* copy to target address [r1] */
+ cmp r0, r2 /* until source end addreee [r2] */
+ blo copyex
+#endif /* #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USE_IRQ) */
+ bx lr
+
+#ifndef CONFIG_SPL_BUILD
+
+_rel_dyn_start_ofs:
+ .word __rel_dyn_start - _start
+_rel_dyn_end_ofs:
+ .word __rel_dyn_end - _start
+_dynsym_start_ofs:
+ .word __dynsym_start - _start
+
+#endif
+
+ .globl c_runtime_cpu_setup
+c_runtime_cpu_setup:
+
+ bx lr
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+cpu_init_crit:
+ /*
+ * flush D cache before disabling it
+ */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c14, 0 /* clean & invalidate D cache */
+ mcr p15, 0, r0, c8, c7, 0 /* invalidate TLB */
+ mcr p15, 0, r0, c7, c5, 0 /* invalidate I Cache */
+ mcr p15, 0, r0, c7, c10, 4 /* drain write buffer */
+
+ /*
+ * disable MMU and D cache
+ * enable I cache if CONFIG_SYS_ICACHE_OFF is not defined
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x00000300 /* clear bits 9:8 (---- --RS) */
+ bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */
+#ifdef CONFIG_SYS_EXCEPTION_VECTORS_HIGH
+ orr r0, r0, #0x00002000 /* set bit 13 (--V- ----) */
+#else
+ bic r0, r0, #0x00002000 /* clear bit 13 (--V- ----) */
+#endif
+ orr r0, r0, #0x00000002 /* set bit 2 (A) Align */
+#ifndef CONFIG_SYS_ICACHE_OFF
+ orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
+#endif
+ mcr p15, 0, r0, c1, c0, 0
+
+ /*
+ * Go setup Memory and board specific bits prior to relocation.
+ */
+ mov ip, lr /* perserve link reg across call */
+ bl lowlevel_init /* go setup pll,mux,memory */
+ mov lr, ip /* restore link */
+ mov pc, lr /* back to my caller */
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ *************************************************************************
+ *
+ * Interrupt handling
+ *
+ *************************************************************************
+ */
+
+@
+@ IRQ stack frame.
+@
+#define S_FRAME_SIZE 72
+
+#define S_OLD_R0 68
+#define S_PSR 64
+#define S_PC 60
+#define S_LR 56
+#define S_SP 52
+
+#define S_IP 48
+#define S_FP 44
+#define S_R10 40
+#define S_R9 36
+#define S_R8 32
+#define S_R7 28
+#define S_R6 24
+#define S_R5 20
+#define S_R4 16
+#define S_R3 12
+#define S_R2 8
+#define S_R1 4
+#define S_R0 0
+
+#define MODE_SVC 0x13
+#define I_BIT 0x80
+
+/*
+ * use bad_save_user_regs for abort/prefetch/undef/swi ...
+ * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
+ */
+
+ .macro bad_save_user_regs
+ @ carve out a frame on current user stack
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
+ ldr r2, IRQ_STACK_START_IN
+ @ get values for "aborted" pc and cpsr (into parm regs)
+ ldmia r2, {r2 - r3}
+ add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
+ add r5, sp, #S_SP
+ mov r1, lr
+ stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
+ mov r0, sp @ save current stack into r0 (param register)
+ .endm
+
+ .macro irq_save_user_regs
+ sub sp, sp, #S_FRAME_SIZE
+ stmia sp, {r0 - r12} @ Calling r0-r12
+ @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
+ add r8, sp, #S_PC
+ stmdb r8, {sp, lr}^ @ Calling SP, LR
+ str lr, [r8, #0] @ Save calling PC
+ mrs r6, spsr
+ str r6, [r8, #4] @ Save CPSR
+ str r0, [r8, #8] @ Save OLD_R0
+ mov r0, sp
+ .endm
+
+ .macro irq_restore_user_regs
+ ldmia sp, {r0 - lr}^ @ Calling r0 - lr
+ mov r0, r0
+ ldr lr, [sp, #S_PC] @ Get PC
+ add sp, sp, #S_FRAME_SIZE
+ subs pc, lr, #4 @ return & move spsr_svc into cpsr
+ .endm
+
+ .macro get_bad_stack
+ ldr r13, IRQ_STACK_START_IN @ setup our mode stack
+
+ str lr, [r13] @ save caller lr in position 0 of saved stack
+ mrs lr, spsr @ get the spsr
+ str lr, [r13, #4] @ save spsr in position 1 of saved stack
+ mov r13, #MODE_SVC @ prepare SVC-Mode
+ @ msr spsr_c, r13
+ msr spsr, r13 @ switch modes, make sure moves will execute
+ mov lr, pc @ capture return pc
+ movs pc, lr @ jump to next instruction & switch modes.
+ .endm
+
+ .macro get_irq_stack @ setup IRQ stack
+ ldr sp, IRQ_STACK_START
+ .endm
+
+ .macro get_fiq_stack @ setup FIQ stack
+ ldr sp, FIQ_STACK_START
+ .endm
+#endif /* CONFIG_SPL_BUILD */
+
+/*
+ * exception handlers
+ */
+#ifdef CONFIG_SPL_BUILD
+ .align 5
+do_hang:
+ ldr sp, _TEXT_BASE /* switch to abort stack */
+1:
+ bl 1b /* hang and never return */
+#else /* !CONFIG_SPL_BUILD */
+ .align 5
+undefined_instruction:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_undefined_instruction
+
+ .align 5
+software_interrupt:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_software_interrupt
+
+ .align 5
+prefetch_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_prefetch_abort
+
+ .align 5
+data_abort:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_data_abort
+
+ .align 5
+not_used:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_not_used
+
+#ifdef CONFIG_USE_IRQ
+
+ .align 5
+irq:
+ get_irq_stack
+ irq_save_user_regs
+ bl do_irq
+ irq_restore_user_regs
+
+ .align 5
+fiq:
+ get_fiq_stack
+ /* someone ought to write a more effiction fiq_save_user_regs */
+ irq_save_user_regs
+ bl do_fiq
+ irq_restore_user_regs
+
+#else
+
+ .align 5
+irq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_irq
+
+ .align 5
+fiq:
+ get_bad_stack
+ bad_save_user_regs
+ bl do_fiq
+
+#endif
+#endif /* CONFIG_SPL_BUILD */
@@ -144,6 +144,7 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_AKITA 744
#define MACH_TYPE_E330 753
#define MACH_TYPE_NOKIA770 755
+#define MACH_TYPE_FARADAY 758
#define MACH_TYPE_CARMEVA 769
#define MACH_TYPE_EDB9315A 772
#define MACH_TYPE_STARGATE2 774
@@ -112,6 +112,9 @@ typedef volatile unsigned char vu_char;
#ifdef CONFIG_SOC_DA8XX
#include <asm/arch/hardware.h>
#endif
+#ifdef CONFIG_FARADAY
+#include <asm/arch/hardware.h>
+#endif
#include <part.h>
#include <flash.h>
@@ -257,6 +260,11 @@ typedef void (interrupt_handler_t)(void *);
const typeof( ((type *)0)->member ) *__mptr = (ptr); \
(type *)( (char *)__mptr - offsetof(type,member) );})
+#ifdef CONFIG_FARADAY
+/* board/faraday/xxx/clk.c */
+ulong clk_get_rate(char *id);
+#endif
+
/*
* Function Prototypes
*/