Patchwork board/freescale: switch to u-boot 2013.04

login
register
mail settings
Submitter Gustavo Zacarias
Date May 6, 2013, 2:48 p.m.
Message ID <1367851681-12228-1-git-send-email-gustavo@zacarias.com.ar>
Download mbox | patch
Permalink /patch/241693/
State Accepted
Commit 9e5a5451c7785214568f35e679be0a43ec48f4df
Headers show

Comments

Gustavo Zacarias - May 6, 2013, 2:48 p.m.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
---
 board/freescale/mpc8315erdb/readme.txt  | 2 +-
 board/freescale/p1010rdb/readme.txt     | 2 +-
 configs/freescale_mpc8315erdb_defconfig | 2 +-
 configs/freescale_p1010rdb_defconfig    | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
Peter Korsgaard - May 6, 2013, 2:55 p.m.
>>>>> "Gustavo" == Gustavo Zacarias <gustavo@zacarias.com.ar> writes:

 Gustavo> Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>

Committed, thanks.

 Gustavo> @@ -29,4 +29,4 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 Gustavo>  # Bootloader
 Gustavo>  BR2_TARGET_UBOOT=y
 Gustavo>  BR2_TARGET_UBOOT_BOARDNAME="P1010RDB_NOR"
 Gustavo> -BR2_TARGET_UBOOT_2012_10=y
 Gustavo> +BR2_TARGET_UBOOT_2013_04=y

This will have to change to UBOOT_CUSTOM_VERSION once that lands.
Gustavo Zacarias - May 6, 2013, 2:58 p.m.
On 05/06/2013 11:55 AM, Peter Korsgaard wrote:
> This will have to change to UBOOT_CUSTOM_VERSION once that lands.

Yes, it would probably be a good policy to do it for all the board
configurations.
Regards.

Patch

diff --git a/board/freescale/mpc8315erdb/readme.txt b/board/freescale/mpc8315erdb/readme.txt
index 91e58e4..f7f9c94 100644
--- a/board/freescale/mpc8315erdb/readme.txt
+++ b/board/freescale/mpc8315erdb/readme.txt
@@ -6,7 +6,7 @@  It won't work for NOR and will brick that bootloader!
 Also don't go playing around with different U-boot versions or flash targets
 unless you've got the necessary hardware and/or know-how to unbrick your kit.
 
-2012.10 is known good for NAND.
+2013.04 is known good for NAND.
 ******************** WARNING ********************
 
 You'll need to program the files created by buildroot into the flash.
diff --git a/board/freescale/p1010rdb/readme.txt b/board/freescale/p1010rdb/readme.txt
index 96293b7..5b56873 100644
--- a/board/freescale/p1010rdb/readme.txt
+++ b/board/freescale/p1010rdb/readme.txt
@@ -6,7 +6,7 @@  It won't work for NAND or SPI and will brick those bootloaders!
 Also don't go playing around with different U-boot versions or flash targets
 unless you've got the necessary hardware and/or know-how to unbrick your kit.
 
-2012.10 is known good for NOR, but BAD for NAND and SPI.
+2013.04 is known good for NOR.
 ******************** WARNING ********************
 
 You'll need to program the files created by buildroot into the flash.
diff --git a/configs/freescale_mpc8315erdb_defconfig b/configs/freescale_mpc8315erdb_defconfig
index 9f733fa..88e0d8a 100644
--- a/configs/freescale_mpc8315erdb_defconfig
+++ b/configs/freescale_mpc8315erdb_defconfig
@@ -30,4 +30,4 @@  BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="MPC8315ERDB_NAND"
-BR2_TARGET_UBOOT_2012_10=y
+BR2_TARGET_UBOOT_2013_04=y
diff --git a/configs/freescale_p1010rdb_defconfig b/configs/freescale_p1010rdb_defconfig
index a36f07c..8887636 100644
--- a/configs/freescale_p1010rdb_defconfig
+++ b/configs/freescale_p1010rdb_defconfig
@@ -29,4 +29,4 @@  BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"
 # Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="P1010RDB_NOR"
-BR2_TARGET_UBOOT_2012_10=y
+BR2_TARGET_UBOOT_2013_04=y