Patchwork [U-Boot,1/6] README: mx28_common: Keep the text within 80 columns

login
register
mail settings
Submitter Fabio Estevam
Date May 3, 2013, 6:07 p.m.
Message ID <1367604482-20955-1-git-send-email-festevam@gmail.com>
Download mbox | patch
Permalink /patch/241360/
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Comments

Fabio Estevam - May 3, 2013, 6:07 p.m.
From: Fabio Estevam <fabio.estevam@freescale.com>

In order to improve readability keep the text within 80 columns.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 doc/README.mx28_common |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
Fabio Estevam - May 3, 2013, 6:08 p.m.
From: Fabio Estevam <fabio.estevam@freescale.com>

Board specific READMEs should be located inside the respective board directory.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 .../freescale/mx28evk/README                       |    0
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename doc/README.mx28evk => board/freescale/mx28evk/README (100%)

diff --git a/doc/README.mx28evk b/board/freescale/mx28evk/README
similarity index 100%
rename from doc/README.mx28evk
rename to board/freescale/mx28evk/README
Fabio Estevam - May 3, 2013, 6:08 p.m.
From: Fabio Estevam <fabio.estevam@freescale.com>

Board specific READMEs should be located inside the respective board directory.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
 doc/README.m28 => board/denx/m28evk/README |    0
 1 file changed, 0 insertions(+), 0 deletions(-)
 rename doc/README.m28 => board/denx/m28evk/README (100%)

diff --git a/doc/README.m28 b/board/denx/m28evk/README
similarity index 100%
rename from doc/README.m28
rename to board/denx/m28evk/README
Marek Vasut - May 3, 2013, 7:54 p.m.
Dear Fabio Estevam,

> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Board specific READMEs should be located inside the respective board
> directory.

Where did you find this rule?

Best regards,
Marek Vasut
Fabio Estevam - May 3, 2013, 8:23 p.m.
On Fri, May 3, 2013 at 4:54 PM, Marek Vasut <marex@denx.de> wrote:
> Dear Fabio Estevam,
>
>> From: Fabio Estevam <fabio.estevam@freescale.com>
>>
>> Board specific READMEs should be located inside the respective board
>> directory.
>
> Where did you find this rule?

Here:

commit 702e6014f15b307f144fa03ecaf83a8446c6802a
Author: Wolfgang Denk <wd@denx.de>
Date:   Sun Apr 29 23:57:39 2012 +0000

    doc: cleanup - move board READMEs into respective board directories

    Also drop a few files referring to no longer / not yet supported
    boards.

    Signed-off-by: Wolfgang Denk <wd@denx.de>
    Cc: Prafulla Wadaskar <prafulla@marvell.com>
    Cc: Stefan Roese <sr@denx.de>
    Cc: Kim Phillips <kim.phillips@freescale.com>
    Cc: Andy Fleming <afleming@gmail.com>
    Cc: Jason Jin <jason.jin@freescale.com>
    Cc: Stefano Babic <sbabic@denx.de>
    Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
    Acked-by: Stefano Babic <sbabic@denx.de>
    Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Marek Vasut - May 3, 2013, 8:47 p.m.
Dear Fabio Estevam,

> On Fri, May 3, 2013 at 4:54 PM, Marek Vasut <marex@denx.de> wrote:
> > Dear Fabio Estevam,
> > 
> >> From: Fabio Estevam <fabio.estevam@freescale.com>
> >> 
> >> Board specific READMEs should be located inside the respective board
> >> directory.
> > 
> > Where did you find this rule?
> 
> Here:
> 
> commit 702e6014f15b307f144fa03ecaf83a8446c6802a
> Author: Wolfgang Denk <wd@denx.de>
> Date:   Sun Apr 29 23:57:39 2012 +0000

I see, thanks.

Best regards,
Marek Vasut
Stefano Babic - June 26, 2013, 3:43 p.m.
On 03/05/2013 20:08, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Board specific READMEs should be located inside the respective board directory.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---
>  .../freescale/mx28evk/README                       |    0
>  1 file changed, 0 insertions(+), 0 deletions(-)
>  rename doc/README.mx28evk => board/freescale/mx28evk/README (100%)
> 
> diff --git a/doc/README.mx28evk b/board/freescale/mx28evk/README
> similarity index 100%
> rename from doc/README.mx28evk
> rename to board/freescale/mx28evk/README
> 

Strange, I cannot find this patch in patchworks..anyway

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic
Stefano Babic - June 26, 2013, 3:43 p.m.
On 03/05/2013 20:07, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> In order to improve readability keep the text within 80 columns.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---


Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic
Stefano Babic - June 26, 2013, 3:44 p.m.
On 03/05/2013 20:08, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
> 
> Board specific READMEs should be located inside the respective board directory.
> 
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> ---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic
Otavio Salvador - June 26, 2013, 3:46 p.m.
On Wed, Jun 26, 2013 at 12:43 PM, Stefano Babic <sbabic@denx.de> wrote:
> On 03/05/2013 20:08, Fabio Estevam wrote:
>> From: Fabio Estevam <fabio.estevam@freescale.com>
>>
>> Board specific READMEs should be located inside the respective board directory.
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
>> ---
>>  .../freescale/mx28evk/README                       |    0
>>  1 file changed, 0 insertions(+), 0 deletions(-)
>>  rename doc/README.mx28evk => board/freescale/mx28evk/README (100%)
>>
>> diff --git a/doc/README.mx28evk b/board/freescale/mx28evk/README
>> similarity index 100%
>> rename from doc/README.mx28evk
>> rename to board/freescale/mx28evk/README
>>
>
> Strange, I cannot find this patch in patchworks..anyway
>
> Applied to u-boot-imx, thanks.

This is because it was  a rename so patchwork does not track it. It is a bug ...

--
Otavio Salvador                             O.S. Systems
http://www.ossystems.com.br        http://projetos.ossystems.com.br
Mobile: +55 (53) 9981-7854            Mobile: +1 (347) 903-9750
Marek Vasut - June 26, 2013, 7:57 p.m.
Dear Otavio Salvador,

> On Wed, Jun 26, 2013 at 12:43 PM, Stefano Babic <sbabic@denx.de> wrote:
> > On 03/05/2013 20:08, Fabio Estevam wrote:
> >> From: Fabio Estevam <fabio.estevam@freescale.com>
> >> 
> >> Board specific READMEs should be located inside the respective board
> >> directory.
> >> 
> >> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
> >> ---
> >> 
> >>  .../freescale/mx28evk/README                       |    0
> >>  1 file changed, 0 insertions(+), 0 deletions(-)
> >>  rename doc/README.mx28evk => board/freescale/mx28evk/README (100%)
> >> 
> >> diff --git a/doc/README.mx28evk b/board/freescale/mx28evk/README
> >> similarity index 100%
> >> rename from doc/README.mx28evk
> >> rename to board/freescale/mx28evk/README
> > 
> > Strange, I cannot find this patch in patchworks..anyway
> > 
> > Applied to u-boot-imx, thanks.
> 
> This is because it was  a rename so patchwork does not track it. It is a
> bug ...

Fix it and send patch ;-)

Best regards,
Marek Vasut

Patch

diff --git a/doc/README.mx28_common b/doc/README.mx28_common
index 8bacaf8..6618908 100644
--- a/doc/README.mx28_common
+++ b/doc/README.mx28_common
@@ -63,9 +63,9 @@  means "/usr/local/bin/" has to be in your $PATH.
 2) Compiling U-Boot for a MX28 based board
 -------------------------------------------
 
-Compiling the U-Boot for a MX28 board is straightforward and done as compiling U-Boot
-for any other ARM device. For cross-compiler setup, please refer to ELDK5.0
-documentation. First, clean up the source code:
+Compiling the U-Boot for a MX28 board is straightforward and done as compiling
+U-Boot for any other ARM device. For cross-compiler setup, please refer to
+ELDK5.0 documentation. First, clean up the source code:
 
 	$ make mrproper
 
@@ -150,8 +150,8 @@  NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains
 4) Installation of U-Boot into NAND flash
 -----------------------------------------
 
-To boot a MX28 based board from NAND, set the boot mode DIP switches according to i.MX28
-manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
+To boot a MX28 based board from NAND, set the boot mode DIP switches according
+to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
 
 There are two possibilities when preparing an image writable to NAND flash.