diff mbox

[U-Boot,2/4] imx: iomux-v3: cosmetic: Reorganize definitions

Message ID 1366976088-30499-2-git-send-email-benoit.thebaudeau@advansee.com
State Awaiting Upstream
Delegated to: Stefano Babic
Headers show

Commit Message

Benoît Thébaudeau April 26, 2013, 11:34 a.m. UTC 
Keep pad control definitions together, and organize definitions in a more
legible way.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
---
 arch/arm/include/asm/imx-common/iomux-v3.h |   33 ++++++++++++++++------------
 1 file changed, 19 insertions(+), 14 deletions(-)

Comments

Stefano Babic April 28, 2013, 9:21 a.m. UTC | #1 
On 26/04/2013 13:34, Benoît Thébaudeau wrote:
> Keep pad control definitions together, and organize definitions in a more
> legible way.
> 
> Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
> ---
>  arch/arm/include/asm/imx-common/iomux-v3.h |   33 ++++++++++++++++------------
>  1 file changed, 19 insertions(+), 14 deletions(-)
> 
Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic
diff mbox

Patch

diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index 87d849a..6b58381 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -86,31 +86,29 @@  typedef u64 iomux_v3_cfg_t;
 	((iomux_v3_cfg_t)(sel_input_ofs) << MUX_SEL_INPUT_OFS_SHIFT)|	\
 	((iomux_v3_cfg_t)(sel_input)     << MUX_SEL_INPUT_SHIFT))
 
+#define __NA_			0x000
+#define NO_MUX_I		0
+#define NO_PAD_I		0
+
 #define NO_PAD_CTRL		(1 << 17)
-#define GPIO_PIN_MASK		0x1f
-#define GPIO_PORT_SHIFT		5
-#define GPIO_PORT_MASK		(0x7 << GPIO_PORT_SHIFT)
-#define GPIO_PORTA		(0 << GPIO_PORT_SHIFT)
-#define GPIO_PORTB		(1 << GPIO_PORT_SHIFT)
-#define GPIO_PORTC		(2 << GPIO_PORT_SHIFT)
-#define GPIO_PORTD		(3 << GPIO_PORT_SHIFT)
-#define GPIO_PORTE		(4 << GPIO_PORT_SHIFT)
-#define GPIO_PORTF		(5 << GPIO_PORT_SHIFT)
 
 #ifdef CONFIG_MX6
 
 #define PAD_CTL_HYS		(1 << 16)
+
 #define PAD_CTL_PUS_100K_DOWN	(0 << 14)
 #define PAD_CTL_PUS_47K_UP	(1 << 14)
 #define PAD_CTL_PUS_100K_UP	(2 << 14)
 #define PAD_CTL_PUS_22K_UP	(3 << 14)
-
 #define PAD_CTL_PUE		(1 << 13)
 #define PAD_CTL_PKE		(1 << 12)
+
 #define PAD_CTL_ODE		(1 << 11)
+
 #define PAD_CTL_SPEED_LOW	(1 << 6)
 #define PAD_CTL_SPEED_MED	(2 << 6)
 #define PAD_CTL_SPEED_HIGH	(3 << 6)
+
 #define PAD_CTL_DSE_DISABLE	(0 << 3)
 #define PAD_CTL_DSE_240ohm	(1 << 3)
 #define PAD_CTL_DSE_120ohm	(2 << 3)
@@ -142,13 +140,20 @@  typedef u64 iomux_v3_cfg_t;
 
 #endif
 
-#define PAD_CTL_SRE_FAST	(1 << 0)
 #define PAD_CTL_SRE_SLOW	(0 << 0)
+#define PAD_CTL_SRE_FAST	(1 << 0)
 
 #define IOMUX_CONFIG_SION	0x10
-#define __NA_			0x000
-#define NO_MUX_I		0
-#define NO_PAD_I		0
+
+#define GPIO_PIN_MASK		0x1f
+#define GPIO_PORT_SHIFT		5
+#define GPIO_PORT_MASK		(0x7 << GPIO_PORT_SHIFT)
+#define GPIO_PORTA		(0 << GPIO_PORT_SHIFT)
+#define GPIO_PORTB		(1 << GPIO_PORT_SHIFT)
+#define GPIO_PORTC		(2 << GPIO_PORT_SHIFT)
+#define GPIO_PORTD		(3 << GPIO_PORT_SHIFT)
+#define GPIO_PORTE		(4 << GPIO_PORT_SHIFT)
+#define GPIO_PORTF		(5 << GPIO_PORT_SHIFT)
 
 void imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
 void imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,