Patchwork [U-Boot,2/2,v2] mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes

login
register
mail settings
Submitter Stefan Roese
Date April 26, 2013, 9:20 a.m.
Message ID <1366968023-10646-1-git-send-email-sr@denx.de>
Download mbox | patch
Permalink /patch/239771/
State Accepted
Delegated to: Wolfgang Denk
Headers show

Comments

Stefan Roese - April 26, 2013, 9:20 a.m.
The changes to a3m071/a4m2k in summary are:
- Enable CAN1 on I2C in GPS Port Configuration
- Enable SPI on PSC2
- Activate network console
- New flash partitioning
- Fix some typos
- Pass host name to Linux
- Change rootfs to squashfs,jffs2
- Enable UBI/UBIFS support
- Enable FIT support

Signed-off-by: Stefan Roese <sr@denx.de>
---
v2:
- Not only redundant env but also some other fixes and updates
  included
- Therefore the patch subject has been changed

 board/a3m071/a3m071.c    | 26 +++++++++++----
 include/configs/a3m071.h | 87 ++++++++++++++++++++++++++++++++++--------------
 2 files changed, 82 insertions(+), 31 deletions(-)
Wolfgang Denk - May 2, 2013, 6:46 p.m.
Dear Stefan Roese,

In message <1366968023-10646-1-git-send-email-sr@denx.de> you wrote:
> The changes to a3m071/a4m2k in summary are:
> - Enable CAN1 on I2C in GPS Port Configuration
> - Enable SPI on PSC2
> - Activate network console
> - New flash partitioning
> - Fix some typos
> - Pass host name to Linux
> - Change rootfs to squashfs,jffs2
> - Enable UBI/UBIFS support
> - Enable FIT support
> 
> Signed-off-by: Stefan Roese <sr@denx.de>
> ---
> v2:
> - Not only redundant env but also some other fixes and updates
>   included
> - Therefore the patch subject has been changed
> 
>  board/a3m071/a3m071.c    | 26 +++++++++++----
>  include/configs/a3m071.h | 87 ++++++++++++++++++++++++++++++++++--------------
>  2 files changed, 82 insertions(+), 31 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Patch

diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c
index 0f9f883..c62ba62 100644
--- a/board/a3m071/a3m071.c
+++ b/board/a3m071/a3m071.c
@@ -8,7 +8,7 @@ 
  * (C) Copyright 2006
  * MicroSys GmbH
  *
- * Copyright 2012 Stefan Roese <sr@denx.de>
+ * Copyright 2012-2013 Stefan Roese <sr@denx.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -241,12 +241,26 @@  void spl_board_init(void)
 
 	/* And write new value back to register */
 	out_be32(&mm->ipbi_ws_ctrl, val);
-#endif
 
-	/*
-	 * No need to change the pin multiplexing (MPC5XXX_GPS_PORT_CONFIG)
-	 * as all 3 config versions (failsave level) have the same setup.
-	 */
+
+	/* Setup pin multiplexing */
+	if (failsavelevel == 2) {
+		/* fpga-version ok */
+#if defined(CONFIG_SYS_GPS_PORT_CONFIG_2)
+		out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG_2);
+#endif
+	} else if (failsavelevel == 1) {
+		/* digiboard-version ok - fpga not */
+#if defined(CONFIG_SYS_GPS_PORT_CONFIG_1)
+		out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG_1);
+#endif
+	} else {
+		/* full failsave-mode */
+#if defined(CONFIG_SYS_GPS_PORT_CONFIG)
+		out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG);
+#endif
+	}
+#endif
 
 	/*
 	 * Setup gpio_wkup_7 as watchdog AS INPUT to disable it - see
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h
index bcf3853..f8832f4 100644
--- a/include/configs/a3m071.h
+++ b/include/configs/a3m071.h
@@ -1,5 +1,5 @@ 
 /*
- * Copyright 2012 Stefan Roese <sr@denx.de>
+ * Copyright 2012-2013 Stefan Roese <sr@denx.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -59,6 +59,38 @@ 
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_DHCP
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_MAY_FAIL
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_NET_RETRY_COUNT 3
+#define CONFIG_CMD_LINK_LOCAL
+#define CONFIG_NETCONSOLE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_CMD_PING
+#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS	/* needed for UBI */
+#define CONFIG_FLASH_CFI_MTD
+#define MTDIDS_DEFAULT          "nor0=fc000000.flash"
+#define MTDPARTS_DEFAULT	"mtdparts=fc000000.flash:512k(u-boot),"	\
+						"256k(env),"	\
+						"128k(hwinfo),"	\
+						"1M(nvramsim),"	\
+						"128k(dtb),"	\
+						"5M(kernel),"	\
+						"128k(sysinfo),"	\
+						"7552k(root),"	\
+						"4M(app),"	\
+						"13568k(data)"
+#define CONFIG_LZO			/* needed for UBI */
+#define CONFIG_RBTREE			/* needed for UBI */
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_FIT
 
 /*
  * IPB Bus clocking configuration.
@@ -88,7 +120,7 @@ 
  */
 #define CONFIG_SYS_FLASH_BASE		0xfc000000
 #define CONFIG_SYS_FLASH_SIZE		0x02000000
-#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x40000)
+#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x80000)
 
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	256
@@ -109,6 +141,8 @@ 
 #define CONFIG_ENV_SIZE		0x10000
 #define CONFIG_ENV_SECT_SIZE	0x20000
 #define CONFIG_ENV_OVERWRITE
+#define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 
 /*
  * Memory map
@@ -127,8 +161,8 @@ 
 
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
-#define CONFIG_SYS_MALLOC_LEN		(1 << 20)
+#define CONFIG_SYS_MONITOR_LEN		(512 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(4 << 20)
 #define CONFIG_SYS_BOOTMAPSZ		(8 << 20)
 
 /*
@@ -154,14 +188,14 @@ 
  */
 
 #ifdef CONFIG_A4M2K
-#define CONFIG_SYS_GPS_PORT_CONFIG	0x0005C805
+#define CONFIG_SYS_GPS_PORT_CONFIG	0x1005C805
 #else
 /* for failsave-level 0 - full failsave */
 #define CONFIG_SYS_GPS_PORT_CONFIG	0x1005C005
 /* for failsave-level 1 - only digiboard ok */
-#define CONFIG_SYS_GPS_PORT_CONFIG_1	0x1005C005
+#define CONFIG_SYS_GPS_PORT_CONFIG_1	0x1005C065
 /* for failsave-level 2 - all ok */
-#define CONFIG_SYS_GPS_PORT_CONFIG_2	0x1005C005
+#define CONFIG_SYS_GPS_PORT_CONFIG_2	0x1005C065
 #endif
 
 #define CONFIG_WDOG_GPIO_PIN		GPIO_WKUP_7
@@ -171,10 +205,10 @@ 
 
 /*
  * Configuration matrix
- *                        MSB                          LSB
+ *                        MSB                            LSB
  * failsave 0  0x1005C005  00010000000001011100000000000101  ( full failsave )
- * failsave 1  0x1005C005  00010000000001011100000000000101  ( digib.-ver ok )
- * failsave 2  0x1005C005  00010000000001011100000000000101  ( all ok )
+ * failsave 1  0x1005C065  00010000000001011100000001100101  ( digib.-ver ok )
+ * failsave 2  0x1005C065  00010000000001011100000001100101  ( all ok )
  *                         || ||| ||  |   ||| |   |   |   |
  *                         || ||| ||  |   ||| |   |   |   |  bit rev name
  *                         ++-+++-++--+---+++-+---+---+---+-  0   31 CS1
@@ -310,10 +344,12 @@ 
  * Environment Configuration
  */
 
-#define CONFIG_BOOTDELAY	0	/* -1 disables auto-boot */
+#define CONFIG_BOOTDELAY	3	/* -1 disables auto-boot */
 #undef  CONFIG_BOOTARGS
 #define CONFIG_ZERO_BOOTDELAY_CHECK
 
+#define CONFIG_SYS_AUTOLOAD	"n"
+
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Type \"run flash_mtd\" to boot from flash with mtd filesystem;" \
 	"echo Type \"run net_nfs\" to boot from tftp with nfs filesystem;" \
@@ -321,11 +357,10 @@ 
 
 #undef	CONFIG_BOOTARGS
 
-#define CONFIG_SYS_OS_BASE	0xfc080000
-#define CONFIG_SYS_FDT_BASE	0xfc060000
+#define CONFIG_SYS_OS_BASE	0xfc200000
+#define CONFIG_SYS_FDT_BASE	0xfc1e0000
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
 	"netdev=eth0\0"							\
 	"verify=no\0"							\
 	"loadaddr=200000\0"						\
@@ -342,29 +377,31 @@ 
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}\0"			\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
-	"mtdargs=setenv bootargs root=/dev/mtdblock4 rw rootfstype=jffs2\0" \
+	"mtdargs=setenv bootargs root=/dev/mtdblock7 "			\
+		"rootfstype=squashfs,jffs2\0"				\
+	"addhost=setenv bootargs ${bootargs} "				\
+		"hostname=${hostname}\0"				\
 	"addip=setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addtty=setenv bootargs ${bootargs} "				\
 		"console=${consoledev},${baudrate}\0"			\
-	"flash_nfs=run nfsargs addip addtty;"				\
-		"bootm ${kernel_addr} - ${fdtaddr}\0"			\
-	"flash_mtd=run mtdargs addip addtty;"				\
-		"bootm ${kernel_addr} - ${fdtaddr}\0"			\
-	"flash_self=run ramargs addip addtty;"				\
+	"flash_nfs=run nfsargs addip addtty addhost;"			\
+		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
+	"flash_mtd=run mtdargs addip addtty addhost;"			\
+		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
+	"flash_self=run ramargs addip addtty addhost;"			\
 		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
 	"net_nfs=tftp ${kernel_addr_r} ${bootfile};"			\
 		"tftp ${fdt_addr_r} ${fdtfile};"			\
-		"run nfsargs addip addtty;"				\
+		"run nfsargs addip addtty addhost;"			\
 		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
 	"load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME)		\
 		"/u-boot-img.bin\0"					\
-	"update=protect off fc000000 fc03ffff; "			\
-		"era fc000000 fc03ffff; cp.b ${loadaddr} fc000000 40000\0" \
+	"update=protect off fc000000 fc07ffff; "			\
+		"era fc000000 fc07ffff;"				\
+		"cp.b ${loadaddr} fc000000 ${filesize}\0"		\
 	"upd=run load;run update\0"					\
-	"bootdelay=3\0"							\
-	"bootcmd=run net_nfs\0"						\
 	""
 
 #define CONFIG_BOOTCOMMAND	"run flash_mtd"