Patchwork [U-Boot,v3,03/11] net: add Faraday FTMAC110 10/100Mbps ethernet support

login
register
mail settings
Submitter Kuo-Jung Su
Date April 26, 2013, 8:02 a.m.
Message ID <1366963360-2987-4-git-send-email-dantesu@gmail.com>
Download mbox | patch
Permalink /patch/239715/
State Superseded
Delegated to: Joe Hershberger
Headers show

Comments

Kuo-Jung Su - April 26, 2013, 8:02 a.m.
From: Kuo-Jung Su <dantesu@faraday-tech.com>

Faraday FTMAC110 10/100Mbps supports half-word data transfer for Linux.
However it has a weird DMA alignment issue:

(1) Tx DMA Buffer Address:
    1 bytes aligned: Invalid
    2 bytes aligned: O.K
    4 bytes aligned: O.K

(2) Rx DMA Buffer Address:
    1 bytes aligned: Invalid
    2 bytes aligned: O.K
    4 bytes aligned: Invalid!!!

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
CC: Joe Hershberger <joe.hershberger@gmail.com>
---
 drivers/net/Makefile   |    1 +
 drivers/net/ftmac110.c |  471 ++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/net/ftmac110.h |  126 +++++++++++++
 include/netdev.h       |    1 +
 4 files changed, 599 insertions(+)
 create mode 100644 drivers/net/ftmac110.c
 create mode 100644 drivers/net/ftmac110.h
Tom Rini - May 2, 2013, 4:03 p.m.
On Fri, Apr 26, 2013 at 04:02:32PM +0800, Kuo-Jung Su wrote:

> From: Kuo-Jung Su <dantesu@faraday-tech.com>
[snip]
> +		| (phyaddr << PHYCR_ADDR_SHIFT)
> +		| (phyreg  << PHYCR_REG_SHIFT)
> +		| 0x30000000;

Magic number.

> +
> +	writel(tmp, &regs->phycr);
> +
> +	for (ts = get_timer(0); get_timer(ts) < 1000; ) {

Please define a TIMEOUT and use that insteadof 1000 all the time.

[snip]
> +	/* interrupt at every packet transmit/receive */
> +	writel(0x00001010, &regs->itc);
> +	/* tx/rx poll interval=5.12us; rx_poll_cnt=1 */
> +	writel(0x00000001, &regs->aptc);
> +	/* rx fifo: high=1536, low=512 */
> +	writel(0x00000390, &regs->dblac);
> +	/* clear all interrupt status */
> +	writel(0x000003FF, &regs->isr);

More magic numbers.  Please fix globally.  Thanks!
Kuo-Jung Su - May 3, 2013, 6:01 a.m.
2013/5/3 Tom Rini <trini@ti.com>:
> On Fri, Apr 26, 2013 at 04:02:32PM +0800, Kuo-Jung Su wrote:
>
>> From: Kuo-Jung Su <dantesu@faraday-tech.com>
> [snip]
>> +             | (phyaddr << PHYCR_ADDR_SHIFT)
>> +             | (phyreg  << PHYCR_REG_SHIFT)
>> +             | 0x30000000;
>
> Magic number.
>
It's the HW debug function, it would be removed at next version.

>> +
>> +     writel(tmp, &regs->phycr);
>> +
>> +     for (ts = get_timer(0); get_timer(ts) < 1000; ) {
>
> Please define a TIMEOUT and use that insteadof 1000 all the time.
>

Got it, thanks

> [snip]
>> +     /* interrupt at every packet transmit/receive */
>> +     writel(0x00001010, &regs->itc);
>> +     /* tx/rx poll interval=5.12us; rx_poll_cnt=1 */
>> +     writel(0x00000001, &regs->aptc);
>> +     /* rx fifo: high=1536, low=512 */
>> +     writel(0x00000390, &regs->dblac);
>> +     /* clear all interrupt status */
>> +     writel(0x000003FF, &regs->isr);
>
> More magic numbers.  Please fix globally.  Thanks!
>

Got it, thanks

> --
> Tom



--
Best wishes,
Kuo-Jung Su

Patch

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 786a656..0e23817 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -46,6 +46,7 @@  COBJS-$(CONFIG_ETHOC) += ethoc.o
 COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o
 COBJS-$(CONFIG_FSLDMAFEC) += fsl_mcdmafec.o mcfmii.o
 COBJS-$(CONFIG_FTGMAC100) += ftgmac100.o
+COBJS-$(CONFIG_FTMAC110) += ftmac110.o
 COBJS-$(CONFIG_FTMAC100) += ftmac100.o
 COBJS-$(CONFIG_GRETH) += greth.o
 COBJS-$(CONFIG_INCA_IP_SWITCH) += inca-ip_sw.o
diff --git a/drivers/net/ftmac110.c b/drivers/net/ftmac110.c
new file mode 100644
index 0000000..04f886f
--- /dev/null
+++ b/drivers/net/ftmac110.c
@@ -0,0 +1,471 @@ 
+/*
+ * Faraday 10/100Mbps Ethernet Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <malloc.h>
+#include <net.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/dma-mapping.h>
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+#endif
+
+#include "ftmac110.h"
+
+#define CFG_RXDES_NUM   8
+#define CFG_TXDES_NUM   2
+#define CFG_XBUF_SIZE   1536
+
+/*
+ * FTMAC110 DMA design issue
+ *
+ * Its DMA engine has a weird restriction that its Rx DMA engine
+ * accepts only 16-bits aligned address, 32-bits aligned is not
+ * acceptable. However this restriction does not apply to Tx DMA.
+ *
+ * Conclusion:
+ * (1) Tx DMA Buffer Address:
+ *     1 bytes aligned: Invalid
+ *     2 bytes aligned: O.K
+ *     4 bytes aligned: O.K (-> u-boot ZeroCopy is possible)
+ * (2) Rx DMA Buffer Address:
+ *     1 bytes aligned: Invalid
+ *     2 bytes aligned: O.K
+ *     4 bytes aligned: Invalid
+ */
+
+struct ftmac110_chip {
+	void __iomem *regs;
+	uint32_t imr;
+	uint32_t maccr;
+	uint32_t lnkup;
+	uint32_t phy_addr;
+
+	struct ftmac110_rxd *rxd;
+	ulong                rxd_dma;
+	uint32_t             rxd_idx;
+
+	struct ftmac110_txd *txd;
+	ulong                txd_dma;
+	uint32_t             txd_idx;
+};
+
+static int ftmac110_reset(struct eth_device *dev);
+
+static uint16_t mdio_read(struct eth_device *dev,
+	uint8_t phyaddr, uint8_t phyreg)
+{
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_regs __iomem *regs = chip->regs;
+	uint32_t tmp, ts;
+	uint16_t ret = 0xffff;
+
+	tmp = PHYCR_READ
+		| (phyaddr << PHYCR_ADDR_SHIFT)
+		| (phyreg  << PHYCR_REG_SHIFT)
+		| 0x30000000;
+
+	writel(tmp, &regs->phycr);
+
+	for (ts = get_timer(0); get_timer(ts) < 1000; ) {
+		tmp = readl(&regs->phycr);
+		if (tmp & PHYCR_READ)
+			continue;
+		break;
+	}
+
+	if (tmp & PHYCR_READ)
+		debug("ftmac110: mdio read timeout\n");
+	else
+		ret = (uint16_t)(tmp & 0xffff);
+
+	return ret;
+}
+
+static void mdio_write(struct eth_device *dev,
+	uint8_t phyaddr, uint8_t phyreg, uint16_t phydata)
+{
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_regs __iomem *regs = chip->regs;
+	uint32_t tmp, ts;
+
+	tmp = PHYCR_WRITE
+		| (phyaddr << PHYCR_ADDR_SHIFT)
+		| (phyreg  << PHYCR_REG_SHIFT)
+		| 0x30000000;
+
+	writel(phydata, &regs->phydr);
+	writel(tmp, &regs->phycr);
+
+	for (ts = get_timer(0); get_timer(ts) < 1000; ) {
+		if (readl(&regs->phycr) & PHYCR_WRITE)
+			continue;
+		break;
+	}
+
+	if (readl(&regs->phycr) & PHYCR_WRITE)
+		debug("ftmac110: mdio write timeout\n");
+}
+
+static uint32_t ftmac110_phyqry(struct eth_device *dev)
+{
+	ulong ts;
+	uint32_t maccr;
+	uint16_t pa, tmp;
+	struct ftmac110_chip *chip = dev->priv;
+
+	maccr = MACCR_100M | MACCR_FD;
+
+	/* 0. find the phy device  */
+	for (pa = 0; pa < 32; ++pa) {
+		tmp = mdio_read(dev, pa, MII_PHYSID1);
+		if (tmp == 0xFFFF || tmp == 0x0000)
+			continue;
+		break;
+	}
+	if (pa >= 32) {
+		puts("ftmac110: phy device not found!\n");
+		return maccr;
+	} else {
+		chip->phy_addr = pa;
+	}
+
+	/* 1. check link status */
+	chip->lnkup = 0;
+	for (ts = get_timer(0); get_timer(ts) < 1000; ) {
+		if (mdio_read(dev, chip->phy_addr, MII_BMSR)
+			& BMSR_LSTATUS) {
+			chip->lnkup = 1;
+			break;
+		}
+	}
+	if (!chip->lnkup) {
+		puts("ftmac110: link down\n");
+		goto exit;
+	}
+
+	/* 2. check A/N status */
+	for (ts = get_timer(0); get_timer(ts) < 1000; ) {
+		if (mdio_read(dev, chip->phy_addr, MII_BMSR)
+			& BMSR_ANEGCOMPLETE)
+			break;
+	}
+	if (get_timer(ts) >= 1000) {
+		puts("ftmac110: A/N failed\n");
+		goto exit;
+	}
+
+	/* 3. build MACCR with the PHY status */
+	tmp  = mdio_read(dev, chip->phy_addr, MII_ADVERTISE);
+	tmp &= mdio_read(dev, chip->phy_addr, MII_LPA);
+
+	/* 3-1. 10/100Mbps Detection */
+	if (tmp & LPA_100FULL)        /* 100Mbps full-duplex */
+		maccr = MACCR_100M | MACCR_FD;
+	else if (tmp & LPA_100HALF)   /* 100Mbps half-duplex */
+		maccr = MACCR_100M;
+	else if (tmp & LPA_10FULL)    /* 10Mbps full-duplex */
+		maccr = MACCR_FD;
+	else if (tmp & LPA_10HALF)    /* 10Mbps half-duplex */
+		maccr = 0;
+	else
+		maccr = MACCR_100M | MACCR_FD;
+
+	printf("ftmac110: %d Mbps, %s\n",
+		   (maccr & MACCR_100M) ? 100 : 10,
+		   (maccr & MACCR_FD) ? "Full" : "half");
+
+exit:
+	return maccr;
+}
+
+static int ftmac110_reset(struct eth_device *dev)
+{
+	uint8_t *a;
+	uint32_t i, maccr;
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_regs __iomem *regs = chip->regs;
+
+	/* 1. MAC reset */
+	writel(MACCR_RESET, &regs->maccr);
+	for (i = get_timer(0); get_timer(i) < 1000; ) {
+		if (readl(&regs->maccr) & MACCR_RESET)
+			continue;
+		break;
+	}
+	if (readl(&regs->maccr) & MACCR_RESET) {
+		printf("ftmac110: reset failed\n");
+		return -ENXIO;
+	}
+
+	/* 1-1. Init tx ring */
+	for (i = 0; i < CFG_TXDES_NUM; ++i) {
+		/* owned by SW */
+		chip->txd[i].ctrl = 0;
+	}
+	chip->txd_idx = 0;
+
+	/* 1-2. Init rx ring */
+	for (i = 0; i < CFG_RXDES_NUM; ++i) {
+		/* owned by HW */
+		chip->rxd[i].ctrl = cpu_to_le32(FTMAC110_RXCTRL_OWNER);
+	}
+	chip->rxd_idx = 0;
+
+	/* 2. PHY status query */
+	maccr = ftmac110_phyqry(dev);
+
+	/* 3. Fix up the MACCR value */
+	chip->maccr = maccr | MACCR_CRCAPD | MACCR_RXALL | MACCR_RXRUNT
+		| MACCR_RXEN | MACCR_TXEN | MACCR_RXDMAEN | MACCR_TXDMAEN;
+	chip->imr = 0;
+
+	/* 4. MAC address setup */
+	a = dev->enetaddr;
+	writel(a[1] | (a[0] << 8), &regs->mac[0]);
+	writel(a[5] | (a[4] << 8) | (a[3] << 16)
+		| (a[2] << 24), &regs->mac[1]);
+
+	/* 5. MAC registers setup */
+	writel(chip->rxd_dma, &regs->rxbar);
+	writel(chip->txd_dma, &regs->txbar);
+	/* interrupt at every packet transmit/receive */
+	writel(0x00001010, &regs->itc);
+	/* tx/rx poll interval=5.12us; rx_poll_cnt=1 */
+	writel(0x00000001, &regs->aptc);
+	/* rx fifo: high=1536, low=512 */
+	writel(0x00000390, &regs->dblac);
+	/* clear all interrupt status */
+	writel(0x000003FF, &regs->isr);
+	writel(chip->imr, &regs->imr);
+	writel(chip->maccr, &regs->maccr);
+
+	return 0;
+}
+
+static int ftmac110_probe(struct eth_device *dev, bd_t *bis)
+{
+	debug("ftmac110: probe\n");
+
+	if (ftmac110_reset(dev))
+		return -1;
+
+	return 0;
+}
+
+static void ftmac110_halt(struct eth_device *dev)
+{
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_regs __iomem *regs = chip->regs;
+
+	writel(0, &regs->imr);
+	writel(0, &regs->maccr);
+
+	debug("ftmac110: halt\n");
+}
+
+static int ftmac110_send(struct eth_device *dev, void *packet, int length)
+{
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_regs __iomem *regs = chip->regs;
+	struct ftmac110_txd *des;
+
+	if (!chip->lnkup)
+		return 0;
+
+	if (length <= 0 || length > CFG_XBUF_SIZE) {
+		printf("ftmac110: bad tx packet length(%d)\n", length);
+		return 0;
+	}
+
+	if (length < 60)
+		length = 60;
+
+	des = &chip->txd[chip->txd_idx];
+	if (le32_to_cpu(des->ctrl) & FTMAC110_TXCTRL_OWNER) {
+		/* kick-off Tx DMA */
+		writel(0xffffffff, &regs->txpd);
+		printf("ftmac110: out of txd\n");
+		return 0;
+	}
+
+	memcpy(des->vbuf, (void *)packet, length);
+	dma_map_single(des->vbuf, length, DMA_TO_DEVICE);
+
+	/* update length, fts and lts */
+	des->conf &= cpu_to_le32(0xe0000000);
+	des->conf |= cpu_to_le32(length
+		| FTMAC110_TXCONF_FTS | FTMAC110_TXCONF_LTS);
+
+	/* set owner bit and clear others */
+	des->ctrl = cpu_to_le32(FTMAC110_TXCTRL_OWNER);
+
+	/* kick-off Tx DMA */
+	writel(0xffffffff, &regs->txpd);
+
+	chip->txd_idx = (chip->txd_idx + 1) % CFG_TXDES_NUM;
+
+	return length;
+}
+
+static int ftmac110_recv(struct eth_device *dev)
+{
+	struct ftmac110_chip *chip = dev->priv;
+	struct ftmac110_rxd *des;
+	uint32_t ctrl, len, rlen = 0;
+	uint8_t *buf;
+
+	if (!chip->lnkup)
+		return 0;
+
+	do {
+		des = &chip->rxd[chip->rxd_idx];
+		ctrl = le32_to_cpu(des->ctrl);
+		if (ctrl & FTMAC110_RXCTRL_OWNER)
+			break;
+
+		len = ctrl & FTMAC110_RXCTRL_LEN_MASK;
+		buf = des->vbuf;
+
+		if (ctrl & FTMAC110_RXCTRL_ERRMASK) {
+			printf("ftmac110: rx error\n");
+		} else {
+			dma_map_single(buf, len, DMA_FROM_DEVICE);
+			NetReceive(buf, len);
+			rlen += len;
+		}
+
+		/* owned by hardware */
+		des->ctrl = cpu_to_le32(FTMAC110_RXCTRL_OWNER);
+
+		chip->rxd_idx = (chip->rxd_idx + 1) % CFG_RXDES_NUM;
+	} while (0);
+
+	return rlen;
+}
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+
+static int ftmac110_mdio_read(
+	const char *devname, uint8_t addr, uint8_t reg, uint16_t *value)
+{
+	int ret = 0;
+	struct eth_device *dev;
+
+	dev = eth_get_dev_by_name(devname);
+	if (dev == NULL) {
+		printf("%s: no such device\n", devname);
+		ret = -1;
+	} else {
+		*value = mdio_read(dev, addr, reg);
+	}
+
+	return ret;
+}
+
+static int ftmac110_mdio_write(
+	const char *devname, uint8_t addr, uint8_t reg, uint16_t value)
+{
+	int ret = 0;
+	struct eth_device *dev;
+
+	dev = eth_get_dev_by_name(devname);
+	if (dev == NULL) {
+		printf("%s: no such device\n", devname);
+		ret = -1;
+	} else {
+		mdio_write(dev, addr, reg, value);
+	}
+
+	return ret;
+}
+
+#endif    /* #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) */
+
+int ftmac110_initialize(bd_t *bis)
+{
+	int i, card_nr = 0;
+	struct eth_device *dev;
+	struct ftmac110_chip *chip;
+
+	dev = malloc(sizeof(*dev) + sizeof(*chip));
+	if (dev == NULL) {
+		panic("ftmac110: out of memory 1\n");
+		return -1;
+	}
+	chip = (struct ftmac110_chip *)(dev + 1);
+	memset(dev, 0, sizeof(*dev) + sizeof(*chip));
+
+	sprintf(dev->name, "FTMAC110#%d", card_nr);
+
+	dev->iobase = CONFIG_FTMAC110_BASE;
+	chip->regs = (void __iomem *)dev->iobase;
+	dev->priv = chip;
+	dev->init = ftmac110_probe;
+	dev->halt = ftmac110_halt;
+	dev->send = ftmac110_send;
+	dev->recv = ftmac110_recv;
+
+	if (!eth_getenv_enetaddr_by_index("eth", card_nr, dev->enetaddr))
+		eth_random_enetaddr(dev->enetaddr);
+
+	/* allocate tx descriptors (it must be 16 bytes aligned) */
+	chip->txd = dma_alloc_coherent(
+		sizeof(struct ftmac110_txd) * CFG_TXDES_NUM, &chip->txd_dma);
+	if (!chip->txd)
+		panic("ftmac110: out of memory 3\n");
+	memset(chip->txd, 0,
+		sizeof(struct ftmac110_txd) * CFG_TXDES_NUM);
+	for (i = 0; i < CFG_TXDES_NUM; ++i) {
+		void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE);
+		if (!va)
+			panic("ftmac110: out of memory 4\n");
+		chip->txd[i].vbuf  = va;
+		chip->txd[i].buf = cpu_to_le32(virt_to_phys(va));
+		chip->txd[i].conf = 0;
+		chip->txd[i].ctrl = 0; /* owned by SW */
+	}
+	chip->txd[i - 1].conf |= cpu_to_le32(FTMAC110_TXCONF_END);
+	chip->txd_idx = 0;
+
+	/* allocate rx descriptors (it must be 16 bytes aligned) */
+	chip->rxd = dma_alloc_coherent(
+		sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM, &chip->rxd_dma);
+	if (!chip->rxd)
+		panic("ftmac110: out of memory 4\n");
+	memset((void *)chip->rxd, 0,
+		sizeof(struct ftmac110_rxd) * CFG_RXDES_NUM);
+	for (i = 0; i < CFG_RXDES_NUM; ++i) {
+		void *va = memalign(ARCH_DMA_MINALIGN, CFG_XBUF_SIZE + 2);
+		if (!va)
+			panic("ftmac110: out of memory 5\n");
+		/* it needs to be exactly 2 bytes aligned */
+		va = ((uint8_t *)va + 2);
+		chip->rxd[i].vbuf = va;
+		chip->rxd[i].buf = cpu_to_le32(virt_to_phys(va));
+		chip->rxd[i].conf = cpu_to_le32(CFG_XBUF_SIZE);
+		chip->rxd[i].ctrl = cpu_to_le32(FTMAC110_RXCTRL_OWNER);
+	}
+	chip->rxd[i - 1].conf |= cpu_to_le32(FTMAC110_RXCONF_END);
+	chip->rxd_idx = 0;
+
+	eth_register(dev);
+
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
+	miiphy_register(dev->name, ftmac110_mdio_read, ftmac110_mdio_write);
+#endif
+
+	card_nr++;
+
+	return card_nr;
+}
diff --git a/drivers/net/ftmac110.h b/drivers/net/ftmac110.h
new file mode 100644
index 0000000..3db3468
--- /dev/null
+++ b/drivers/net/ftmac110.h
@@ -0,0 +1,126 @@ 
+/*
+ * Faraday 10/100Mbps Ethernet Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _FTMAC110_H
+#define _FTMAC110_H
+
+struct ftmac110_regs {
+	uint32_t isr;    /* 0x00: Interrups Status Register */
+	uint32_t imr;    /* 0x04: Interrupt Mask Register */
+	uint32_t mac[2]; /* 0x08: MAC Address */
+	uint32_t mht[2]; /* 0x10: Multicast Hash Table 0 Register */
+	uint32_t txpd;   /* 0x18: Transmit Poll Demand Register */
+	uint32_t rxpd;   /* 0x1c: Receive Poll Demand register */
+	uint32_t txbar;  /* 0x20: Tx Ring Base Address Register */
+	uint32_t rxbar;  /* 0x24: Rx Ring Base Address Register */
+	uint32_t itc;    /* 0x28: Interrupt Timer Control Register */
+	uint32_t aptc;   /* 0x2C: Automatic Polling Timer Control Register */
+	uint32_t dblac;  /* 0x30: DMA Burst Length&Arbitration Control */
+	uint32_t revr;   /* 0x34: Revision Register */
+	uint32_t fear;   /* 0x38: Feature Register */
+	uint32_t rsvd[19];
+	uint32_t maccr;  /* 0x88: MAC Control Register */
+	uint32_t macsr;  /* 0x8C: MAC Status Register */
+	uint32_t phycr;  /* 0x90: PHY Control Register */
+	uint32_t phydr;  /* 0x94: PHY Data Register */
+	uint32_t fcr;    /* 0x98: Flow Control Register */
+	uint32_t bpr;    /* 0x9C: Back Pressure Register */
+};
+
+/* Interrupt status/mask register(ISR/IMR) bits */
+#define ISR_PHYSTCHG     (1 << 9) /* phy status change */
+#define ISR_AHBERR       (1 << 8) /* bus error */
+#define ISR_RXLOST       (1 << 7) /* rx lost due to fifo overflow */
+#define ISR_RXFIFO       (1 << 6) /* rx to fifo */
+#define ISR_TXLOST       (1 << 5) /* tx lost due to collision */
+#define ISR_TXOK         (1 << 4) /* tx to ethernet */
+#define ISR_NOTXBUF      (1 << 3) /* out of tx buffer */
+#define ISR_TXFIFO       (1 << 2) /* packets transmitted to fifo */
+#define ISR_NORXBUF      (1 << 1) /* out of rx buffer */
+#define ISR_RXOK         (1 << 0) /* packets received to buffer (ram) */
+
+/* MACC control bits */
+#define MACCR_100M       (1 << 18) /* 100Mbps mode */
+#define MACCR_RXBCST     (1 << 17) /* receive all broadcast packet */
+#define MACCR_RXMCST     (1 << 16) /* receive all multicast packet */
+#define MACCR_FD         (1 << 15) /* full duplex */
+#define MACCR_CRCAPD     (1 << 14) /* append crc to transmit packet */
+#define MACCR_RXALL      (1 << 12) /* ignore dst address */
+#define MACCR_RXFTL      (1 << 11) /* rx packet even it's > 1518 byte */
+#define MACCR_RXRUNT     (1 << 10) /* rx packet even it's < 64 byte */
+#define MACCR_RXMCSTHT   (1 << 9)  /* rx multicast per hash table */
+#define MACCR_RXEN       (1 << 8)  /* rx enable */
+#define MACCR_RXINHDTX   (1 << 6)  /* rx in half duplex tx */
+#define MACCR_TXEN       (1 << 5)  /* tx enable */
+#define MACCR_CRCDIS     (1 << 4)  /* rx packet even it's crc error */
+#define MACCR_LOOPBACK   (1 << 3)  /* Internal loop-back */
+#define MACCR_RESET      (1 << 2)  /* reset */
+#define MACCR_RXDMAEN    (1 << 1)  /* enable rx dma */
+#define MACCR_TXDMAEN    (1 << 0)  /* enable tx dma */
+
+/* MDIO PHY bits */
+#define PHYCR_READ       (1 << 26)
+#define PHYCR_WRITE      (1 << 27)
+#define PHYCR_REG_SHIFT  21
+#define PHYCR_ADDR_SHIFT 16
+
+/*
+ * descriptor structure
+ */
+struct ftmac110_rxd {
+	/* Hardware control fields */
+	uint32_t ctrl;
+	uint32_t conf;
+	uint32_t buf;
+
+	/* Software control field */
+	void *vbuf;
+};
+
+#define FTMAC110_RXCTRL_OWNER       BIT_MASK(31) /* owner: 1=HW, 0=SW */
+#define FTMAC110_RXCTRL_FRS         BIT_MASK(29) /* 1st pkt desc */
+#define FTMAC110_RXCTRL_LRS         BIT_MASK(28) /* last pkt desc */
+#define FTMAC110_RXCTRL_ODDNB       BIT_MASK(22) /* odd nibble */
+#define FTMAC110_RXCTRL_RUNT        BIT_MASK(21) /* runt pkt */
+#define FTMAC110_RXCTRL_FTL         BIT_MASK(20) /* frame too long */
+#define FTMAC110_RXCTRL_CRC         BIT_MASK(19) /* pkt crc error */
+#define FTMAC110_RXCTRL_ERR         BIT_MASK(18) /* bus error */
+#define FTMAC110_RXCTRL_ERRMASK     (0x1f << 18) /* all errors */
+#define FTMAC110_RXCTRL_BCST        BIT_MASK(17) /* Bcst pkt */
+#define FTMAC110_RXCTRL_MCST        BIT_MASK(16) /* Mcst pkt */
+#define FTMAC110_RXCTRL_LEN_MASK    0x7ff
+#define FTMAC110_RXCTRL_LEN_SHIFT   0
+
+#define FTMAC110_RXCONF_END         BIT_MASK(31)
+#define FTMAC110_RXCONF_BUFSZ_MASK  0x7ff
+#define FTMAC110_RXCONF_BUFSZ_SHIFT 0
+
+struct ftmac110_txd {
+	/* Hardware control fields */
+	uint32_t ctrl;
+	uint32_t conf;
+	uint32_t buf;
+
+	/* Software control field */
+	void *vbuf;
+};
+
+#define FTMAC110_TXCTRL_OWNER       BIT_MASK(31) /* owner: 1=HW, 0=SW */
+#define FTMAC110_TXCTRL_COL         0x00000003   /* collision */
+
+#define FTMAC110_TXCONF_END         BIT_MASK(31) /* end of ring */
+#define FTMAC110_TXCONF_TXIC        BIT_MASK(30) /* tx done interrupt */
+#define FTMAC110_TXCONF_TX2FIC      BIT_MASK(29) /* tx fifo interrupt */
+#define FTMAC110_TXCONF_FTS         BIT_MASK(28) /* 1st pkt desc */
+#define FTMAC110_TXCONF_LTS         BIT_MASK(27) /* last pkt desc */
+#define FTMAC110_TXCONF_BUFSZ_MASK  0x7ff
+#define FTMAC110_TXCONF_BUFSZ_SHIFT 0
+
+#endif  /* FTMAC110_H */
diff --git a/include/netdev.h b/include/netdev.h
index fd3e243..48c2fe5 100644
--- a/include/netdev.h
+++ b/include/netdev.h
@@ -67,6 +67,7 @@  int fecmxc_initialize(bd_t *bis);
 int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
 int ftgmac100_initialize(bd_t *bits);
 int ftmac100_initialize(bd_t *bits);
+int ftmac110_initialize(bd_t *bits);
 int greth_initialize(bd_t *bis);
 void gt6426x_eth_initialize(bd_t *bis);
 int inca_switch_initialize(bd_t *bis);