diff mbox

[v3,23/28] dev-smartcard-reader: change default protocol to T=0

Message ID 1366643098-2566-24-git-send-email-alevy@redhat.com
State New
Headers show

Commit Message

Alon Levy April 22, 2013, 3:04 p.m. UTC 
We don't support T=1 so we shouldn't advertise it by default.

Two independent changes:
* Default ATR
 sets T=0. This gets overwritten by the client provided ATR later.
* Class descriptor
 changes dwAdvertise dwProtocols.PPPP to 0x1 and dwProtocols.RRRR=0 per spec.

Signed-off-by: Alon Levy <alevy@redhat.com>
---
 hw/usb/dev-smartcard-reader.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/hw/usb/dev-smartcard-reader.c b/hw/usb/dev-smartcard-reader.c
index 0d482a9..8022f9f 100644
--- a/hw/usb/dev-smartcard-reader.c
+++ b/hw/usb/dev-smartcard-reader.c
@@ -335,8 +335,8 @@  static const uint8_t qemu_ccid_descriptor[] = {
                      */
         0x07,       /* u8  bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */
 
-        0x03, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
-        0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
+        0x00, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
+        0x01, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
                     /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */
         0xa0, 0x0f, 0x00, 0x00,
                     /* u32 dwMaximumClock; */
@@ -875,7 +875,7 @@  static const CCID_ProtocolDataStructure defaultProtocolDataStructure = {
 
 static void ccid_reset_parameters(USBCCIDState *s)
 {
-   s->bProtocolNum = 1; /* T=1 */
+   s->bProtocolNum = 0; /* T=0 */
    s->abProtocolDataStructure = defaultProtocolDataStructure;
 }