[for-1.5,v3,09/15] xilinx_spips: lqspi: Dont touch config register

Submitted by Peter Crosthwaite on April 22, 2013, 5:17 a.m.

Details

Message ID 7144a3fd23aaf2791c60626e9ffa0fa8bd428087.1366606958.git.peter.crosthwaite@xilinx.com
State New
Headers show

Commit Message

Peter Crosthwaite April 22, 2013, 5:17 a.m.
From: Peter Crosthwaite <peter.crosthwaite@xilinx.com>

The LQSPI mode is supposed to work via the automatic CS mode feature
rather than manipulate CS lines itself. Now that auto CS is implemented
remove LQSPIs CS mode override logic. There is still a need to
manipulate the U_PAGE bit in LQSPI config register to implement
dual-stack mode however.

Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
---
This patch in new as of v2

 hw/ssi/xilinx_spips.c |   12 ++++++------
 1 files changed, 6 insertions(+), 6 deletions(-)

Patch hide | download patch | download mbox

diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index 3f31a32..2ee3958 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -511,16 +511,16 @@  lqspi_read(void *opaque, hwaddr addr, unsigned int size)
         int flash_addr = (addr / num_effective_busses(s));
         int slave = flash_addr >> LQSPI_ADDRESS_BITS;
         int cache_entry = 0;
+        uint32_t u_page_save = s->regs[R_LQSPI_STS] & ~LQSPI_CFG_U_PAGE;
+
+        s->regs[R_LQSPI_STS] &= ~LQSPI_CFG_U_PAGE;
+        s->regs[R_LQSPI_STS] |= slave ? LQSPI_CFG_U_PAGE : 0;
 
         DB_PRINT("config reg status: %08x\n", s->regs[R_LQSPI_CFG]);
 
         fifo8_reset(&s->tx_fifo);
         fifo8_reset(&s->rx_fifo);
 
-        s->regs[R_CONFIG] &= ~CS;
-        s->regs[R_CONFIG] |= ((~(1 << slave) << CS_SHIFT) & CS) | MANUAL_CS;
-        xilinx_spips_update_cs_lines(s);
-
         /* instruction */
         DB_PRINT("pushing read instruction: %02x\n",
                  (uint8_t)(s->regs[R_LQSPI_CFG] & LQSPI_CFG_INST_CODE));
@@ -554,9 +554,9 @@  lqspi_read(void *opaque, hwaddr addr, unsigned int size)
             rx_data_bytes(s, &q->lqspi_buf[cache_entry], 4);
             cache_entry++;
         }
-        xilinx_spips_update_cs_lines(s);
 
-        s->regs[R_CONFIG] |= CS;
+        s->regs[R_LQSPI_STS] &= ~LQSPI_CFG_U_PAGE;
+        s->regs[R_LQSPI_STS] |= u_page_save;
         xilinx_spips_update_cs_lines(s);
 
         q->lqspi_cached_addr = addr;