@@ -18,6 +18,10 @@ extern struct efx_phy_operations falcon_sft9001_phy_ops;
extern void tenxpress_phy_blink(struct efx_nic *efx, bool blink);
+/* Wait for the PHY to boot. Return 0 on success, -EINVAL if the PHY failed
+ * to boot due to corrupt flash, or some other negative error code. */
+extern int sft9001_wait_boot(struct efx_nic *efx);
+
/****************************************************************************
* Exported functions from the driver for XFP optical PHYs
*/
@@ -399,6 +399,7 @@ static struct i2c_board_info sfn4111t_r5_hwmon_info = {
int sfn4111t_init(struct efx_nic *efx)
{
+ int i = 0;
int rc;
efx->board_info.hwmon_client =
@@ -417,13 +418,20 @@ int sfn4111t_init(struct efx_nic *efx)
if (rc)
goto fail_hwmon;
- if (efx->phy_mode & PHY_MODE_SPECIAL) {
- efx_stats_disable(efx);
- sfn4111t_reset(efx);
- }
-
- return 0;
+ do {
+ if (efx->phy_mode & PHY_MODE_SPECIAL) {
+ /* PHY may not generate a 156.25 MHz clock and MAC
+ * stats fetch will fail. */
+ efx_stats_disable(efx);
+ sfn4111t_reset(efx);
+ }
+ rc = sft9001_wait_boot(efx);
+ if (rc == 0)
+ return 0;
+ efx->phy_mode = PHY_MODE_SPECIAL;
+ } while (rc == -EINVAL && ++i < 2);
+ device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
fail_hwmon:
i2c_unregister_device(efx->board_info.hwmon_client);
return rc;
@@ -158,14 +158,16 @@
#define PCS_10GBASET_BLKLK_WIDTH 1
/* Boot status register */
-#define PCS_BOOT_STATUS_REG 53248
-#define PCS_BOOT_FATAL_ERR_LBN (0)
-#define PCS_BOOT_PROGRESS_LBN (1)
-#define PCS_BOOT_PROGRESS_WIDTH (2)
-#define PCS_BOOT_COMPLETE_LBN (3)
-
-#define PCS_BOOT_MAX_DELAY (100)
-#define PCS_BOOT_POLL_DELAY (10)
+#define PCS_BOOT_STATUS_REG 53248
+#define PCS_BOOT_FATAL_ERROR_LBN 0
+#define PCS_BOOT_PROGRESS_LBN 1
+#define PCS_BOOT_PROGRESS_WIDTH 2
+#define PCS_BOOT_PROGRESS_INIT 0
+#define PCS_BOOT_PROGRESS_WAIT_MDIO 1
+#define PCS_BOOT_PROGRESS_CHECKSUM 2
+#define PCS_BOOT_PROGRESS_JUMP 3
+#define PCS_BOOT_DOWNLOAD_WAIT_LBN 3
+#define PCS_BOOT_CODE_STARTED_LBN 4
/* 100M/1G PHY registers */
#define GPHY_XCONTROL_REG 49152
@@ -230,40 +232,62 @@ static ssize_t set_phy_short_reach(struct device *dev,
static DEVICE_ATTR(phy_short_reach, 0644, show_phy_short_reach,
set_phy_short_reach);
-/* Check that the C166 has booted successfully */
-static int tenxpress_phy_check(struct efx_nic *efx)
+int sft9001_wait_boot(struct efx_nic *efx)
{
- int phy_id = efx->mii.phy_id;
- int count = PCS_BOOT_MAX_DELAY / PCS_BOOT_POLL_DELAY;
+ unsigned long timeout = jiffies + HZ + 1;
int boot_stat;
- /* Wait for the boot to complete (or not) */
- while (count) {
- boot_stat = mdio_clause45_read(efx, phy_id,
+ for (;;) {
+ boot_stat = mdio_clause45_read(efx, efx->mii.phy_id,
MDIO_MMD_PCS,
PCS_BOOT_STATUS_REG);
- if (boot_stat & (1 << PCS_BOOT_COMPLETE_LBN))
- break;
- count--;
- udelay(PCS_BOOT_POLL_DELAY);
- }
+ if (boot_stat >= 0) {
+ EFX_LOG(efx, "PHY boot status = %#x\n", boot_stat);
+ switch (boot_stat &
+ ((1 << PCS_BOOT_FATAL_ERROR_LBN) |
+ (3 << PCS_BOOT_PROGRESS_LBN) |
+ (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN) |
+ (1 << PCS_BOOT_CODE_STARTED_LBN))) {
+ case ((1 << PCS_BOOT_FATAL_ERROR_LBN) |
+ (PCS_BOOT_PROGRESS_CHECKSUM <<
+ PCS_BOOT_PROGRESS_LBN)):
+ case ((1 << PCS_BOOT_FATAL_ERROR_LBN) |
+ (PCS_BOOT_PROGRESS_INIT <<
+ PCS_BOOT_PROGRESS_LBN) |
+ (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN)):
+ return -EINVAL;
+ case ((PCS_BOOT_PROGRESS_WAIT_MDIO <<
+ PCS_BOOT_PROGRESS_LBN) |
+ (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN)):
+ return (efx->phy_mode & PHY_MODE_SPECIAL) ?
+ 0 : -EIO;
+ case ((PCS_BOOT_PROGRESS_JUMP <<
+ PCS_BOOT_PROGRESS_LBN) |
+ (1 << PCS_BOOT_CODE_STARTED_LBN)):
+ case ((PCS_BOOT_PROGRESS_JUMP <<
+ PCS_BOOT_PROGRESS_LBN) |
+ (1 << PCS_BOOT_DOWNLOAD_WAIT_LBN) |
+ (1 << PCS_BOOT_CODE_STARTED_LBN)):
+ return (efx->phy_mode & PHY_MODE_SPECIAL) ?
+ -EIO : 0;
+ default:
+ if (boot_stat & (1 << PCS_BOOT_FATAL_ERROR_LBN))
+ return -EIO;
+ break;
+ }
+ }
- if (!count) {
- EFX_ERR(efx, "%s: PHY boot timed out. Last status "
- "%x\n", __func__,
- (boot_stat >> PCS_BOOT_PROGRESS_LBN) &
- ((1 << PCS_BOOT_PROGRESS_WIDTH) - 1));
- return -ETIMEDOUT;
- }
+ if (time_after_eq(jiffies, timeout))
+ return -ETIMEDOUT;
- return 0;
+ msleep(50);
+ }
}
static int tenxpress_init(struct efx_nic *efx)
{
int phy_id = efx->mii.phy_id;
int reg;
- int rc;
if (efx->phy_type == PHY_TYPE_SFX7101) {
/* Enable 312.5 MHz clock */
@@ -286,10 +310,6 @@ static int tenxpress_init(struct efx_nic *efx)
false);
}
- rc = tenxpress_phy_check(efx);
- if (rc < 0)
- return rc;
-
/* Set the LEDs up as: Green = Link, Amber = Link/Act, Red = Off */
if (efx->phy_type == PHY_TYPE_SFX7101) {
mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_PMAPMD,
@@ -300,7 +320,7 @@ static int tenxpress_init(struct efx_nic *efx)
PMA_PMD_LED_OVERR_REG, PMA_PMD_LED_DEFAULT);
}
- return rc;
+ return 0;
}
static int tenxpress_phy_init(struct efx_nic *efx)
During SFN4111T initialisation, check whether the PHY boot status indicates a bad firmware checksum. If so, prepare to reflash rather than continuing with normal initialisation. Remove redundant PHY boot status check from tenxpress_phy_init(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> --- drivers/net/sfc/phy.h | 4 ++ drivers/net/sfc/sfe4001.c | 20 +++++++--- drivers/net/sfc/tenxpress.c | 90 ++++++++++++++++++++++++++----------------- 3 files changed, 73 insertions(+), 41 deletions(-)