diff mbox

[v3] net: more timeouts that reach -1

Message ID 49A8181A.5030106@gmail.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

roel kluin Feb. 27, 2009, 4:43 p.m. UTC 
Guo-Fu Tseng wrote:
> On Fri, 27 Feb 2009 16:37:30 +0100, roel kluin wrote
>> On Fri, Feb 27, 2009 at 12:43 PM, Guo-Fu Tseng <cooldavid@cooldavid.org> wrote:
>>> There should be no difference after this modification.
>>> The return value of this function is: "limit > 0 ? limit : 0;"
>> There is:
>> In the last iteration limit is 1 during the test before it is decremented to 0.
>>
>> rxdesc = rxring->desc;
>> rxdesc += i;
>>
>> If then we break out of the loop by the 'goto out;', we continue with:
>>
>> out:
>>         atomic_set(&rxring->next_to_clean, i);
>>
>> out_inc:
>>         atomic_inc(&jme->rx_cleaning);
>>
>> but since limit is already decremented, 0 is returned.
>>
>>> Guo-Fu Tseng
>>>
>> Roel
> I see.
> But the correct patch should be following one, right?
> 
> ===================================================================
> --- jme.c	(revision 580)
> +++ jme.c	(working copy)
> @@ -958,13 +958,14 @@
>  		goto out_inc;
>  
>  	i = atomic_read(&rxring->next_to_clean);
> -	while (limit-- > 0) {
> +	while (limit > 0) {
>  		rxdesc = rxring->desc;
>  		rxdesc += i;
>  
>  		if ((rxdesc->descwb.flags & RXWBFLAG_OWN) ||
>  		!(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
>  			goto out;
> +		--limit;
>  
>  		desccnt = rxdesc->descwb.desccnt & RXWBDCNT_DCNT;
>  
> 
> 
> 
> Guo-Fu Tseng

Correct, thanks.
Here are all three patches again with another issue I spotted in 
drivers/net/ucc_geth_mii.c:

After my patch it still wouldn't err, because timeout was unsigned.
------------------------------>8-------------8<---------------------------------
with while (timeout-- > 0); timeout reaches -1 after the loop, so the tests
below are off by one. also don't do an '< 0' test on an unsigned.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
---
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

David Miller March 4, 2009, 8:10 a.m. UTC | #1 
From: Roel Kluin <roel.kluin@gmail.com>
Date: Fri, 27 Feb 2009 17:43:06 +0100

> Here are all three patches again with another issue I spotted in 
> drivers/net/ucc_geth_mii.c:
> 
> After my patch it still wouldn't err, because timeout was unsigned.

I'll make sure to integrate this version of your patch instead
of the original which I just said I applied :-)
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 1cf2f94..f3a1274 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -560,7 +560,7 @@  ks8695_reset(struct ks8695_priv *ksp)
 		msleep(1);
 	}
 
-	if (reset_timeout == 0) {
+	if (reset_timeout < 0) {
 		dev_crit(ksp->dev,
 			 "Timeout waiting for DMA engines to reset\n");
 		/* And blithely carry on */
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 08b3405..a6e1a35 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -957,13 +957,14 @@  jme_process_receive(struct jme_adapter *jme, int limit)
 		goto out_inc;
 
 	i = atomic_read(&rxring->next_to_clean);
-	while (limit-- > 0) {
+	while (limit > 0) {
 		rxdesc = rxring->desc;
 		rxdesc += i;
 
 		if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) ||
 		!(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
 			goto out;
+		--limit;
 
 		desccnt = rxdesc->descwb.desccnt & RXWBDCNT_DCNT;
 
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index 5463591..0ada4ed 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -107,7 +107,7 @@  int uec_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 static int uec_mdio_reset(struct mii_bus *bus)
 {
 	struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
-	unsigned int timeout = PHY_INIT_TIMEOUT;
+	int timeout = PHY_INIT_TIMEOUT;
 
 	mutex_lock(&bus->mdio_lock);
 
@@ -123,7 +123,7 @@  static int uec_mdio_reset(struct mii_bus *bus)
 
 	mutex_unlock(&bus->mdio_lock);
 
-	if (timeout <= 0) {
+	if (timeout < 0) {
 		printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
 		return -EBUSY;
 	}