Patchwork powerpc/mpc52xx: add Phytec phyCORE-MPC5200B-IO board (pcm032)

login
register
mail settings
Submitter Wolfram Sang
Date Feb. 25, 2009, 3:32 p.m.
Message ID <1235575933-29691-1-git-send-email-w.sang@pengutronix.de>
Download mbox | patch
Permalink /patch/23715/
State Changes Requested
Delegated to: Grant Likely
Headers show

Comments

Wolfram Sang - Feb. 25, 2009, 3:32 p.m.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
---
 arch/powerpc/boot/dts/pcm032.dts             |  391 +++++++
 arch/powerpc/configs/52xx/pcm032_defconfig   | 1394 ++++++++++++++++++++++++++
 arch/powerpc/platforms/52xx/Kconfig          |    1 +
 arch/powerpc/platforms/52xx/mpc5200_simple.c |    3 +-
 4 files changed, 1788 insertions(+), 1 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/pcm032.dts
 create mode 100644 arch/powerpc/configs/52xx/pcm032_defconfig
Wolfram Sang - Feb. 25, 2009, 3:40 p.m.
Forgot to mention that this goes on top of Grant's 'next'-branch.

Regards,

   Wolfram
Grant Likely - Feb. 27, 2009, 5:31 a.m.
Thanks for the patch Wolfram.  Comments below.

On Wed, Feb 25, 2009 at 8:32 AM, Wolfram Sang <w.sang@pengutronix.de> wrote:
> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
> ---
>  arch/powerpc/boot/dts/pcm032.dts             |  391 +++++++
>  arch/powerpc/configs/52xx/pcm032_defconfig   | 1394 ++++++++++++++++++++++++++

Do you really need a separate defconfig for this board?  Can it be
merged with an existing defconfig?

>  arch/powerpc/platforms/52xx/Kconfig          |    1 +
>  arch/powerpc/platforms/52xx/mpc5200_simple.c |    3 +-
>  4 files changed, 1788 insertions(+), 1 deletions(-)
>  create mode 100644 arch/powerpc/boot/dts/pcm032.dts
>  create mode 100644 arch/powerpc/configs/52xx/pcm032_defconfig
>
> diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
> new file mode 100644
> index 0000000..ebaf660
> --- /dev/null
> +++ b/arch/powerpc/boot/dts/pcm032.dts
> @@ -0,0 +1,391 @@
> [...]
> +       lpb@e4000000 {

As per generic names recommended practice, this node name should
really be something like "localbus {", and you should drop the node
address since the local bus doesn't really have an address.

> +               compatible = "fsl,lpb";

Ideally should be: compatible =
"fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
I know that 'fsl,lpb' has been used in the past, but it is far to
generic and isn't good practice.  The 'simple-bus' property ensures
that the bus will get probed.

> +               ranges = <0x0 0xe4000000 0x08000000>;
> +               #size-cells = <1>;
> +               #address-cells = <1>;

Should be #address-cells = <2>;.  First cell is CS#, second cell is
offset from base of CS.  This is particularly important if the LPB
FIFO is ever used with any of this hardware.

motionpro.dts is a good example of what it should look like.

> +
> +               /* free chipselect */
> +               cs4@00000000 {
> +                       compatible = "free";

Very bad!  If you want to show available chip selects, then add some
commented out sections as examples.  Creating nodes with the extremely
generic compatible value of "free" is just asking for trouble
(especially when someone new sees the example and decides to use the
same thing in their driver).

> +       lpb@f7000000 {

Another localbus node?  Why can't a single localbus node hold all the
child nodes?

> +               compatible = "fsl,lpb";
> +               ranges = <0x0 0xf7000000 0x09000000>;
> +               #size-cells = <1>;
> +               #address-cells = <1>;
> +
> +               fpga1@00e00000 {
> +                       compatible = "fpga1";

Too generic.  Be board specific.

> +                       reg = <0x00e00000 0x02000000>;
> +                       bank-width = <4>;
> +               };
> +
> +               fpga2@02e00000 {
> +                       compatible = "fpga2";

Ditto

Otherwise, the rest of the patch looks good to me.

g.
Wolfram Sang - March 1, 2009, 10:18 a.m.
Hi Grant,

thanks for the review!

On Thu, Feb 26, 2009 at 10:31:24PM -0700, Grant Likely wrote:
> Thanks for the patch Wolfram.  Comments below.
> 
> On Wed, Feb 25, 2009 at 8:32 AM, Wolfram Sang <w.sang@pengutronix.de> wrote:
> > Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
> > ---
> >  arch/powerpc/boot/dts/pcm032.dts             |  391 +++++++
> >  arch/powerpc/configs/52xx/pcm032_defconfig   | 1394 ++++++++++++++++++++++++++
> 
> Do you really need a separate defconfig for this board?  Can it be
> merged with an existing defconfig?

Will have a look if I can make a pcm03x_defconfig out of pcm030_defconfig.

> motionpro.dts is a good example of what it should look like.

Ah, thanks for the pointer. Will have a look there. Guess I'll need to update
pcm030.dts later, too (from which I copied this one). Will rewrite the
localbus-node addressing the comments you gave.

Regards,

   Wolfram
Grant Likely - March 1, 2009, 2:48 p.m.
On Sun, Mar 1, 2009 at 3:18 AM, Wolfram Sang <w.sang@pengutronix.de> wrote:
> Hi Grant,
>
> thanks for the review!
>
> On Thu, Feb 26, 2009 at 10:31:24PM -0700, Grant Likely wrote:
>> Thanks for the patch Wolfram.  Comments below.
>>
>> On Wed, Feb 25, 2009 at 8:32 AM, Wolfram Sang <w.sang@pengutronix.de> wrote:
>> > Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
>> > ---
>> >  arch/powerpc/boot/dts/pcm032.dts             |  391 +++++++
>> >  arch/powerpc/configs/52xx/pcm032_defconfig   | 1394 ++++++++++++++++++++++++++
>>
>> Do you really need a separate defconfig for this board?  Can it be
>> merged with an existing defconfig?
>
> Will have a look if I can make a pcm03x_defconfig out of pcm030_defconfig.

Cool, thanks.

>> motionpro.dts is a good example of what it should look like.
>
> Ah, thanks for the pointer. Will have a look there. Guess I'll need to update
> pcm030.dts later, too (from which I copied this one). Will rewrite the
> localbus-node addressing the comments you gave.

pcm030.dts in mainline doesn't have a localbus node.

g.
Jon Smirl - March 1, 2009, 3:54 p.m.
On Sun, Mar 1, 2009 at 9:48 AM, Grant Likely <grant.likely@secretlab.ca> wrote:
> On Sun, Mar 1, 2009 at 3:18 AM, Wolfram Sang <w.sang@pengutronix.de> wrote:
>> Hi Grant,
>>
>> thanks for the review!
>>
>> On Thu, Feb 26, 2009 at 10:31:24PM -0700, Grant Likely wrote:
>>> Thanks for the patch Wolfram.  Comments below.
>>>
>>> On Wed, Feb 25, 2009 at 8:32 AM, Wolfram Sang <w.sang@pengutronix.de> wrote:
>>> > Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
>>> > ---
>>> >  arch/powerpc/boot/dts/pcm032.dts             |  391 +++++++
>>> >  arch/powerpc/configs/52xx/pcm032_defconfig   | 1394 ++++++++++++++++++++++++++
>>>
>>> Do you really need a separate defconfig for this board?  Can it be
>>> merged with an existing defconfig?
>>
>> Will have a look if I can make a pcm03x_defconfig out of pcm030_defconfig.
>
> Cool, thanks.
>
>>> motionpro.dts is a good example of what it should look like.
>>
>> Ah, thanks for the pointer. Will have a look there. Guess I'll need to update
>> pcm030.dts later, too (from which I copied this one). Will rewrite the
>> localbus-node addressing the comments you gave.
>
> pcm030.dts in mainline doesn't have a localbus node.

I've been using this on my pcm030 locally.

pcm030 doesn't have a PCI socket but it can be added via the expansion bus.
With just the basic pcm030 hardware, if I uncomment the pci node I
sometimes hang on boot.

	lpb@ff000000 {
		compatible = "fsl,lpb", "simple-bus";
		#address-cells = <2>;
		#size-cells = <1>;
		ranges = <0 0 0xff000000 0x01000000>;

		flash@0 {
			compatible = "cfi-flash";
			reg = <0 0 0x01000000>;
			bank-width = <2>;
			device-width = <2>;
			#size-cells = <1>;
			#address-cells = <1>;
			partition@0 {
				label = "ubootl";
				reg = <0x00000000 0x00040000>;
			};
			partition@40000 {
				label = "kernel";
				reg = <0x00040000 0x001c0000>;
			};
			partition@200000 {
				label = "jffs2";
				reg = <0x00200000 0x00D00000>;
			};
			partition@f00000 {
				label = "uboot";
				reg = <0x00f00000 0x00040000>;
			};
			partition@f40000 {
				label = "oftree";
				reg = <0x00f40000 0x00040000>;
			};
			partition@f80000 {
				label = "space";
				reg = <0x00f80000 0x00080000>;
			};
		};
	};
	/*
	pci@f0000d00 {
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
		reg = <0xf0000d00 0x100>;
		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
		interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 / 1st slot /
				 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3
				 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3
				 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3

				 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 / 2nd slot /
				 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3
				 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3
				 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>;
		clock-frequency = <0>; // From boot loader
		interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>;
		interrupt-parent = <&mpc5200_pic>;
		bus-range = <0 0>;
		ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000
			  0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
			  0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>;
	};
*/


>
> g.
>
> --
> Grant Likely, B.Sc., P.Eng.
> Secret Lab Technologies Ltd.
> _______________________________________________
> Linuxppc-dev mailing list
> Linuxppc-dev@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-dev
>
Grant Likely - March 1, 2009, 10:47 p.m.
On Sun, Mar 1, 2009 at 8:54 AM, Jon Smirl <jonsmirl@gmail.com> wrote:
> On Sun, Mar 1, 2009 at 9:48 AM, Grant Likely <grant.likely@secretlab.ca> wrote:
>> On Sun, Mar 1, 2009 at 3:18 AM, Wolfram Sang <w.sang@pengutronix.de> wrote:
>>> Hi Grant,
>>>
>>> thanks for the review!
>>>
>>> On Thu, Feb 26, 2009 at 10:31:24PM -0700, Grant Likely wrote:
>>>> Thanks for the patch Wolfram.  Comments below.
>>>>
>>>> On Wed, Feb 25, 2009 at 8:32 AM, Wolfram Sang <w.sang@pengutronix.de> wrote:
>>>> > Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
>>>> > ---
>>>> >  arch/powerpc/boot/dts/pcm032.dts             |  391 +++++++
>>>> >  arch/powerpc/configs/52xx/pcm032_defconfig   | 1394 ++++++++++++++++++++++++++
>>>>
>>>> Do you really need a separate defconfig for this board?  Can it be
>>>> merged with an existing defconfig?
>>>
>>> Will have a look if I can make a pcm03x_defconfig out of pcm030_defconfig.
>>
>> Cool, thanks.
>>
>>>> motionpro.dts is a good example of what it should look like.
>>>
>>> Ah, thanks for the pointer. Will have a look there. Guess I'll need to update
>>> pcm030.dts later, too (from which I copied this one). Will rewrite the
>>> localbus-node addressing the comments you gave.
>>
>> pcm030.dts in mainline doesn't have a localbus node.
>
> I've been using this on my pcm030 locally.

Hey Jon, a few comments below for the record.  :-)

> pcm030 doesn't have a PCI socket but it can be added via the expansion bus.
> With just the basic pcm030 hardware, if I uncomment the pci node I
> sometimes hang on boot.

Hmmm.  Weird.  Have you been able to identify what code it hangs in?

>
>        lpb@ff000000 {

This node doesn't really have an address since it is simply a bus (the
control registers are elsewhere).  Should make this simply: locabus {

>                compatible = "fsl,lpb", "simple-bus";

Ideally this should be: compatible =
"fsl,mpc5200b-lpb",fsl,mpc5200-lpb","simple-bus".  However, I forgot
to add "simple-bus" to arch/powerpc/platforms/52xx/mpc52xx-common.c
for the bus probing code and so this won't work in current mainline.
The fix is queued up in -next, and I'm going to try and get it into
.29

Cheers,
g.
Jon Smirl - March 2, 2009, 12:37 a.m.
Just tried it on pcm030. If I uncomment the reg line the kernel won't
boot at all. I don't get any output.

        pci@f0000d00 {
		#interrupt-cells = <1>;
		#size-cells = <2>;
		#address-cells = <3>;
		device_type = "pci";
		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
		/*reg = <0xf0000d00 0x100>; */
		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
				 0xc000 0 0 2 &mpc5200_pic 1 1 3
				 0xc000 0 0 3 &mpc5200_pic 1 2 3
				 0xc000 0 0 4 &mpc5200_pic 1 3 3

				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
				 0xc800 0 0 2 &mpc5200_pic 1 2 3
				 0xc800 0 0 3 &mpc5200_pic 1 3 3
				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
		clock-frequency = <0>; // From boot loader
		interrupts = <2 8 0 2 9 0 2 10 0>;
		bus-range = <0 0>;
		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
	};

console log with reg commented out.

Using dspeak01 machine description
Linux version 2.6.29-rc6-efika (jonsmirl@terra) (gcc version 4.1.2)
#970 Sun Mar 1 19:28:25 EST 2009
console [udbg0] enabled
Can't get /pci@f0000d00 resources
port_config: old:558c10 new:559c76
Top of RAM: 0x4000000, Total RAM: 0x4000000
Memory hole size: 0MB
Zone PFN ranges:
  DMA      0x00000000 -> 0x00004000
  Normal   0x00004000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
On node 0 totalpages: 16384
free_area_init_node: node 0, pgdat c0394ca0, node_mem_map c0402000
  DMA zone: 128 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 16256 pages, LIFO batch:3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: rw debug root=/dev/nfs ip=dhcp
nfsroot=192.168.1.4:/home/OSELAS.BSP-Phytec-phyCORE-MPC5200B-tiny-6/root,v3,tcp
netconsole=6666@192.168.1.11/eth0,514@192.168.1.4/00:19:d1:e4:0f:8d
MPC52xx PIC is up and running!
PID hash table entries: 256 (order: 8, 1024 bytes)
time_init: decrementer frequency = 33.333333 MHz
time_init: processor frequency   = 399.999996 MHz
clocksource: timebase mult[7800001] shift[22] registered
clockevent: decrementer mult[888] shift[16] cpu[0]
Console: colour dummy device 80x25
console handover: boot [udbg0] -> real [tty0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61048k/65536k available (3520k kernel code, 4428k reserved,
156k data, 122k bss, 168k init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 66.28 BogoMIPS (lpj=110848)
Mount-cache hash table entries: 512
net_namespace: 296 bytes
NET: Registered protocol family 16
PCI: Probing PCI hardware
DMA: MPC52xx BestComm driver
DMA: MPC52xx BestComm engine @f0001200 ok !
bio: create slab <bio-0> at 0
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
audit: initializing netlink socket (disabled)
type=2000 audit(0.203:1): initialized
msgmni has been set to 119
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered (default)
Generic non-volatile memory driver v1.1
Serial: MPC52xx PSC UART driver
f0002400.serial: ttyPSC0 at MMIO 0xf0002400 (irq = 131) is a MPC52xx PSC
f0002c00.serial: ttyPSC1 at MMIO 0xf0002c00 (irq = 132) is a MPC52xx PSC
brd: module loaded
loop: module loaded
mpc52xx MII bus: probed
eth0 (mpc52xx-fec): not using net_device_ops yet
net eth0: Using PHY at MDIO address 0
netconsole: local port 6666
netconsole: local IP 192.168.1.11
netconsole: interface eth0
netconsole: remote port 514
netconsole: remote IP 192.168.1.4
netconsole: remote ethernet address 00:19:d1:e4:0f:8d
netconsole: device eth0 not up yet, forcing it
net eth0: attached phy 0 to driver Generic PHY
netconsole: carrier detect appears untrustworthy, waiting 4 seconds
PHY: f0003000:00 - Link is Up - 100/Full
console [netcon0] enabled
netconsole: network logging started
ff000000.flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Intel/Sharp Extended Query Table at 0x0031
Using buffer write method
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x20000,blocks=128
Searching for RedBoot partition table in ff000000.flash at offset 0xfe0000
No RedBoot partition table detected in ff000000.flash
Creating 6 MTD partitions on "ff000000.flash":
0x000000000000-0x000000040000 : "ubootl"
0x000000040000-0x000000200000 : "kernel"
0x000000200000-0x000000f00000 : "jffs2"
0x000000f00000-0x000000f40000 : "uboot"
0x000000f40000-0x000000f80000 : "oftree"
0x000000f80000-0x000001000000 : "space"
mpc52xx-spi f0000f00.spi: mode fault; is port_config correct?
mpc52xx-spi: probe of f0000f00.spi failed with error -5
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ppc-of-ohci f0001000.usb: OF OHCI
ppc-of-ohci f0001000.usb: new USB bus registered, assigned bus number 1
ppc-of-ohci f0001000.usb: irq 134, io mem 0xf0001000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ir-gpt f0000670.ir0: ir_gpt_of_probe
input: GPT IR Receiver as /class/input/input0
evbug.c: Connected device: input0 (GPT IR Receiver at unknown)
ir-gpt f0000670.ir0: ir_gpt_of_probe irq=80
ir-gpt f0000670.ir0: ir_gpt_of_probe request irq rc=0
GPT IR Receiver driver
usbcore: registered new interface driver ir_mceusb2
rtc-pcf8563 1-0051: chip found, driver version 0.4.3
rtc-pcf8563 1-0051: rtc core: registered rtc-pcf8563 as rtc0
at24 1-0052: 4096 byte 24c32 EEPROM (writable)
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.18a.
tas5504 0-001b: probing tas5504 i2c device
registering ASoC codec driver: /soc5200@f0000000/i2c@3d00/codec@1b
tas5504 0-001b: I2C device initialized
registering ASoC platform driver: /soc5200@f0000000/i2s@2200
looking for codec: /soc5200@f0000000/i2c@3d00/codec@1b
platform<-->codec match achieved; registering machine
ALSA device list:
  No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
rtc-pcf8563 1-0051: low voltage detected, date/time is not reliable.
rtc-pcf8563 1-0051: retrieved date/time is not valid.
rtc-pcf8563 1-0051: hctosys: invalid date/time
Sending DHCP requests ., OK
IP-Config: Got DHCP answer from 192.168.1.1, my address is 192.168.1.11
IP-Config: Complete:
     device=eth0, addr=192.168.1.11, mask=255.255.255.0, gw=192.168.1.1,
     host=Phytec, domain=is-a-geek.net, nis-domain=(none),
     bootserver=192.168.1.1, rootserver=192.168.1.4, rootpath=
Looking up port of RPC 100003/3 on 192.168.1.4
Looking up port of RPC 100005/3 on 192.168.1.4
VFS: Mounted root (nfs filesystem) on device 0:15.
Freeing unused kernel memory: 168k init
rtc-pcf8563 1-0051: low voltage detected, date/time is not reliable.
rtc-pcf8563 1-0051: retrieved date/time is not valid.
IRQ 131/mpc52xx_psc_uart: IRQF_DISABLED is not guaranteed on shared IRQs
Jon Smirl - March 2, 2009, 12:46 a.m.
On Sun, Mar 1, 2009 at 7:37 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
> Just tried it on pcm030. If I uncomment the reg line the kernel won't
> boot at all. I don't get any output.

I hooked up a serial console instead of netcat.

## Booting image at 00500000 ...
   Image Name:   Linux-2.6.29-rc6-efika
   Created:      2009-03-02   0:28:31 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1776985 Bytes =  1.7 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
   Booting using flat device tree at 0x400000
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61028k/65536k available (3520k kernel code, 4448k reserved,
156k data, 122k bss, 168k init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 66.28 BogoMIPS (lpj=110848)
Mount-cache hash table entries: 512
net_namespace: 296 bytes
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Scanning bus 0000:00
Machine check in kernel mode.
Caused by (from SRR1=41030): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
dspeak01
Modules linked in:
NIP: c001be94 LR: c0158cb4 CTR: c001be04
REGS: c3823de0 TRAP: 0200   Not tainted  (2.6.29-rc6-efika)
MSR: 00041030 <ME,IR,DR>  CR: 28000022  XER: 20000000
TASK = c3824000[1] 'swapper' THREAD: c3822000
GPR00: 80000000 c3823e90 c3824000 c3856000 00000000 00000000 00000004 c3823eb8
GPR08: c03a9848 fcffc000 000008bc 0020213c 82000022 ffefffff 03ffe000 ffffffff
GPR16: 00000001 00000000 007ffc00 00000000 00000000 03ff8838 00000000 00000004
GPR24: 00000000 00000000 c3823eb8 00000000 00000004 00000000 c03c0000 c3856000
NIP [c001be94] mpc52xx_pci_read_config+0x90/0xec
LR [c0158cb4] pci_bus_read_config_dword+0x4c/0x74
Call Trace:
[c3823e90] [c0091238] ifind+0x18/0x6c (unreliable)
[c3823eb0] [c0158cb4] pci_bus_read_config_dword+0x4c/0x74
[c3823ee0] [c0278a90] pci_scan_single_device+0x24/0x4b0
[c3823f10] [c0159d50] pci_scan_slot+0x2c/0x84
[c3823f30] [c027b2d4] pci_scan_child_bus+0x40/0x108
[c3823f50] [c0351c34] pcibios_init+0xdc/0x190
[c3823f70] [c00038f4] do_one_initcall+0x58/0x19c
[c3823fe0] [c034614c] kernel_init+0x74/0xe0
[c3823ff0] [c00133d4] kernel_thread+0x4c/0x68
Instruction dump:
817e0040 5400801e 7c004b78 5769063a 64008000 7d290378 7c0004ac 912b0000
7c0004ac 813e0044 7c0004ac 7d604c2c <0c0b0000> 4c00012c 2f9c0004 57601ef8
---[ end trace 31fd0ba7d8756001 ]---
Kernel panic - not syncing: Attempted to kill init!
Rebooting in 180 seconds..
Grant Likely - March 2, 2009, 1:07 a.m.
On Sun, Mar 1, 2009 at 5:46 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
> On Sun, Mar 1, 2009 at 7:37 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
>> Just tried it on pcm030. If I uncomment the reg line the kernel won't
>> boot at all. I don't get any output.
>
> I hooked up a serial console instead of netcat.
>
> PCI: Probing PCI hardware
> PCI: Scanning bus 0000:00
> Machine check in kernel mode.
> Caused by (from SRR1=41030): Transfer error ack signal
> Oops: Machine check, sig: 7 [#1]
> dspeak01

Yeah, there current PCI driver in mainline expects the bootloader to
set stuff up for PCI to work.  I've fixed some of it, and the fix is
queued up in Ben's -next tree.  Can you try Ben's -next tree?

Thanks,
g.

> Modules linked in:
> NIP: c001be94 LR: c0158cb4 CTR: c001be04
> REGS: c3823de0 TRAP: 0200   Not tainted  (2.6.29-rc6-efika)
> MSR: 00041030 <ME,IR,DR>  CR: 28000022  XER: 20000000
> TASK = c3824000[1] 'swapper' THREAD: c3822000
> GPR00: 80000000 c3823e90 c3824000 c3856000 00000000 00000000 00000004 c3823eb8
> GPR08: c03a9848 fcffc000 000008bc 0020213c 82000022 ffefffff 03ffe000 ffffffff
> GPR16: 00000001 00000000 007ffc00 00000000 00000000 03ff8838 00000000 00000004
> GPR24: 00000000 00000000 c3823eb8 00000000 00000004 00000000 c03c0000 c3856000
> NIP [c001be94] mpc52xx_pci_read_config+0x90/0xec
> LR [c0158cb4] pci_bus_read_config_dword+0x4c/0x74
> Call Trace:
> [c3823e90] [c0091238] ifind+0x18/0x6c (unreliable)
> [c3823eb0] [c0158cb4] pci_bus_read_config_dword+0x4c/0x74
> [c3823ee0] [c0278a90] pci_scan_single_device+0x24/0x4b0
> [c3823f10] [c0159d50] pci_scan_slot+0x2c/0x84
> [c3823f30] [c027b2d4] pci_scan_child_bus+0x40/0x108
> [c3823f50] [c0351c34] pcibios_init+0xdc/0x190
> [c3823f70] [c00038f4] do_one_initcall+0x58/0x19c
> [c3823fe0] [c034614c] kernel_init+0x74/0xe0
> [c3823ff0] [c00133d4] kernel_thread+0x4c/0x68
> Instruction dump:
> 817e0040 5400801e 7c004b78 5769063a 64008000 7d290378 7c0004ac 912b0000
> 7c0004ac 813e0044 7c0004ac 7d604c2c <0c0b0000> 4c00012c 2f9c0004 57601ef8
> ---[ end trace 31fd0ba7d8756001 ]---
> Kernel panic - not syncing: Attempted to kill init!
> Rebooting in 180 seconds..
>
>
> --
> Jon Smirl
> jonsmirl@gmail.com
>
Jon Smirl - March 2, 2009, 2:15 a.m.
On Sun, Mar 1, 2009 at 8:07 PM, Grant Likely <grant.likely@secretlab.ca> wrote:
> On Sun, Mar 1, 2009 at 5:46 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
>> On Sun, Mar 1, 2009 at 7:37 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
>>> Just tried it on pcm030. If I uncomment the reg line the kernel won't
>>> boot at all. I don't get any output.
>>
>> I hooked up a serial console instead of netcat.
>>
>> PCI: Probing PCI hardware
>> PCI: Scanning bus 0000:00
>> Machine check in kernel mode.
>> Caused by (from SRR1=41030): Transfer error ack signal
>> Oops: Machine check, sig: 7 [#1]
>> dspeak01
>
> Yeah, there current PCI driver in mainline expects the bootloader to
> set stuff up for PCI to work.  I've fixed some of it, and the fix is
> queued up in Ben's -next tree.  Can you try Ben's -next tree?

with benh-next...

Bytes transferred = 7681 (1e01 hex)
## Booting image at 00500000 ...
   Image Name:   Linux-2.6.29-rc5-efika
   Created:      2009-03-02   2:13:17 UTC
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1778436 Bytes =  1.7 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
   Booting using flat device tree at 0x400000
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61028k/65536k available (3524k kernel code, 4448k reserved,
156k data, 122k bss, 168k init)
SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 66.28 BogoMIPS (lpj=110848)
Mount-cache hash table entries: 512
net_namespace: 296 bytes
NET: Registered protocol family 16
PCI: Probing PCI hardware
PCI: Scanning bus 0000:00
long pause
Machine check in kernel mode.
Caused by (from SRR1=41030): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
dspeak01
Modules linked in:
NIP: c001c3bc LR: c0158ed0 CTR: c001c32c
REGS: c3823de0 TRAP: 0200   Not tainted  (2.6.29-rc5-efika)
MSR: 00041030 <ME,IR,DR>  CR: 28000022  XER: 20000000
TASK = c3824000[1] 'swapper' THREAD: c3822000
GPR00: 80000000 c3823e90 c3824000 c3856000 00000000 00000000 00000004 c3823eb8
GPR08: c03a9848 fcffc000 000008bc 0020213c 82000022 ffefffff 03ffe000 ffffffff
GPR16: 00000001 00000000 007ffc00 00000000 00000000 03ff8838 00000000 00000004
GPR24: 00000000 00000000 c3823eb8 00000000 00000004 00000000 c03c0000 c3856000
NIP [c001c3bc] mpc52xx_pci_read_config+0x90/0xec
LR [c0158ed0] pci_bus_read_config_dword+0x4c/0x74
Call Trace:
[c3823e90] [c00915dc] ifind+0x18/0x6c (unreliable)
[c3823eb0] [c0158ed0] pci_bus_read_config_dword+0x4c/0x74
[c3823ee0] [c0279090] pci_scan_single_device+0x24/0x4b0
[c3823f10] [c0159f6c] pci_scan_slot+0x2c/0x84
[c3823f30] [c027bae8] pci_scan_child_bus+0x40/0x108
[c3823f50] [c0352c44] pcibios_init+0xdc/0x190
[c3823f70] [c00038f4] do_one_initcall+0x58/0x19c
[c3823fe0] [c034714c] kernel_init+0x74/0xe0
[c3823ff0] [c00133d4] kernel_thread+0x4c/0x68
Instruction dump:
817e0040 5400801e 7c004b78 5769063a 64008000 7d290378 7c0004ac 912b0000
7c0004ac 813e0044 7c0004ac 7d604c2c <0c0b0000> 4c00012c 2f9c0004 57601ef8
---[ end trace 31fd0ba7d8756001 ]---
Kernel panic - not syncing: Attempted to kill init!
Rebooting in 180 seconds..







>
> Thanks,
> g.
>
>> Modules linked in:
>> NIP: c001be94 LR: c0158cb4 CTR: c001be04
>> REGS: c3823de0 TRAP: 0200   Not tainted  (2.6.29-rc6-efika)
>> MSR: 00041030 <ME,IR,DR>  CR: 28000022  XER: 20000000
>> TASK = c3824000[1] 'swapper' THREAD: c3822000
>> GPR00: 80000000 c3823e90 c3824000 c3856000 00000000 00000000 00000004 c3823eb8
>> GPR08: c03a9848 fcffc000 000008bc 0020213c 82000022 ffefffff 03ffe000 ffffffff
>> GPR16: 00000001 00000000 007ffc00 00000000 00000000 03ff8838 00000000 00000004
>> GPR24: 00000000 00000000 c3823eb8 00000000 00000004 00000000 c03c0000 c3856000
>> NIP [c001be94] mpc52xx_pci_read_config+0x90/0xec
>> LR [c0158cb4] pci_bus_read_config_dword+0x4c/0x74
>> Call Trace:
>> [c3823e90] [c0091238] ifind+0x18/0x6c (unreliable)
>> [c3823eb0] [c0158cb4] pci_bus_read_config_dword+0x4c/0x74
>> [c3823ee0] [c0278a90] pci_scan_single_device+0x24/0x4b0
>> [c3823f10] [c0159d50] pci_scan_slot+0x2c/0x84
>> [c3823f30] [c027b2d4] pci_scan_child_bus+0x40/0x108
>> [c3823f50] [c0351c34] pcibios_init+0xdc/0x190
>> [c3823f70] [c00038f4] do_one_initcall+0x58/0x19c
>> [c3823fe0] [c034614c] kernel_init+0x74/0xe0
>> [c3823ff0] [c00133d4] kernel_thread+0x4c/0x68
>> Instruction dump:
>> 817e0040 5400801e 7c004b78 5769063a 64008000 7d290378 7c0004ac 912b0000
>> 7c0004ac 813e0044 7c0004ac 7d604c2c <0c0b0000> 4c00012c 2f9c0004 57601ef8
>> ---[ end trace 31fd0ba7d8756001 ]---
>> Kernel panic - not syncing: Attempted to kill init!
>> Rebooting in 180 seconds..
>>
>>
>> --
>> Jon Smirl
>> jonsmirl@gmail.com
>>
>
>
>
> --
> Grant Likely, B.Sc., P.Eng.
> Secret Lab Technologies Ltd.
>
Jon Smirl - March 2, 2009, 2:19 a.m.
Would it be easier to get Pengutronix to release a new u-boot for the
pcm030? I'm using U-Boot 1.2.0-mpc5200b-tiny-2 (Apr 17 2007 -
11:49:20).
Grant Likely - March 2, 2009, 4:33 a.m.
On Sun, Mar 1, 2009 at 7:19 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
> Would it be easier to get Pengutronix to release a new u-boot for the
> pcm030? I'm using U-Boot 1.2.0-mpc5200b-tiny-2 (Apr 17 2007 -
> 11:49:20).

Only if it is a chip IO setup problem (like port_config or clock
setup).  Otherwise the kernel should be setting up the PCI controller
correctly.  Regardless, I don't think the kernel should be crashing
when PCI is in a funny state.

g.
Robert Schwebel - March 3, 2009, 8:12 a.m.
On Sun, Mar 01, 2009 at 09:33:16PM -0700, Grant Likely wrote:
> On Sun, Mar 1, 2009 at 7:19 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
> > Would it be easier to get Pengutronix to release a new u-boot for
> > the pcm030? I'm using U-Boot 1.2.0-mpc5200b-tiny-2 (Apr 17 2007 -
> > 11:49:20).
>
> Only if it is a chip IO setup problem (like port_config or clock
> setup). Otherwise the kernel should be setting up the PCI controller
> correctly. Regardless, I don't think the kernel should be crashing
> when PCI is in a funny state.

Ack; I didn't follow the thread in detail, but if possible I'd like to
avoid bootloader updates; it's quite a lot of effort because there are
thousends of devices in the field, not to mention the whole
qualification mechanics at Phytec.

Wolfram can check the issue when being back in the office.

rsc
Jon Smirl - March 7, 2009, 2:01 a.m.
On Tue, Mar 3, 2009 at 3:12 AM, Robert Schwebel
<r.schwebel@pengutronix.de> wrote:
> On Sun, Mar 01, 2009 at 09:33:16PM -0700, Grant Likely wrote:
>> On Sun, Mar 1, 2009 at 7:19 PM, Jon Smirl <jonsmirl@gmail.com> wrote:
>> > Would it be easier to get Pengutronix to release a new u-boot for
>> > the pcm030? I'm using U-Boot 1.2.0-mpc5200b-tiny-2 (Apr 17 2007 -
>> > 11:49:20).
>>
>> Only if it is a chip IO setup problem (like port_config or clock
>> setup). Otherwise the kernel should be setting up the PCI controller
>> correctly. Regardless, I don't think the kernel should be crashing
>> when PCI is in a funny state.
>
> Ack; I didn't follow the thread in detail, but if possible I'd like to
> avoid bootloader updates; it's quite a lot of effort because there are
> thousends of devices in the field, not to mention the whole
> qualification mechanics at Phytec.

On a pcm030 1245-1
u-boot-1.2.0-mpc5200b-tiny-3,  boots ok and PCI is initialized correctly.

The readme is not clear that tiny-3 should be used on 1245.1 hardware.
http://www.pengutronix.de/oselas/bsp/phytec/download/phyCORE-MPC5200B-tiny/Readme

This phrase implies the tiny-3 should only be used on 1245.2 hardware.
"U-Boot binary to be used with
OSELAS.BSP-Phytec-phyCORE-MPC5200B-tiny-6 (board revision 1245.2)"

Where is the difference between the 1245.0, 1245.1 and 1245.2 hardware
documented?



>
> Wolfram can check the issue when being back in the office.
>
> rsc
> --
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
>

Patch

diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts
new file mode 100644
index 0000000..ebaf660
--- /dev/null
+++ b/arch/powerpc/boot/dts/pcm032.dts
@@ -0,0 +1,391 @@ 
+/*
+ * phyCORE-MPC5200B-IO (pcm032) board Device Tree Source
+ *
+ * Copyright (C) 2006-2009 Pengutronix
+ * Sascha Hauer <s.hauer@pengutronix.de>
+ * Juergen Beisert <j.beisert@pengutronix.de>
+ * Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "phytec,pcm032";
+	compatible = "phytec,pcm032";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x08000000>;	// 128MB
+	};
+
+	soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+			fsl,has-wdt;
+		};
+
+		timer@610 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+		};
+
+		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		rtc@800 {	// Real time clock
+			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+			reg = <0x800 0x100>;
+			interrupts = <1 5 0 1 6 0>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
+		};
+
+		usb@1000 {
+			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		ac97@2000 {	/* PSC1 is ac97 */
+			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
+			cell-index = <0>;
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		/* PSC2 port is used by CAN1/2 */
+
+		serial@2400 { /* PSC3 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			cell-index = <2>;
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		/* PSC4 is ??? */
+
+		/* PSC5 is ??? */
+
+		serial@2c00 { /* PSC6 in UART mode */
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			cell-index = <5>;
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+			fsl5200-clocking;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+			fsl5200-clocking;
+			rtc@51 {
+				compatible = "nxp,pcf8563";
+				reg = <0x51>;
+			};
+			eeprom@52 {
+				compatible = "at24,24c32";
+				reg = <0x52>;
+			};
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		interrupt-map-mask = <0xf800 0 0 7>;
+		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
+				 0xc000 0 0 2 &mpc5200_pic 1 1 3
+				 0xc000 0 0 3 &mpc5200_pic 1 2 3
+				 0xc000 0 0 4 &mpc5200_pic 1 3 3
+
+				 0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
+				 0xc800 0 0 2 &mpc5200_pic 1 2 3
+				 0xc800 0 0 3 &mpc5200_pic 1 3 3
+				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
+			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+	};
+
+	lpb@e4000000 {
+		compatible = "fsl,lpb";
+		ranges = <0x0 0xe4000000 0x08000000>;
+		#size-cells = <1>;
+		#address-cells = <1>;
+
+		/* free chipselect */
+		cs4@00000000 {
+			compatible = "free";
+			reg = <0x00000000 0x02000000>;
+			bank-width = <4>;
+		};
+		/* free chipselect */
+		cs5@02000000 {
+			compatible = "free";
+			reg = <0x02000000 0x02000000>;
+			bank-width = <4>;
+		};
+		/* free chipselect */
+		cs6@04000000 {
+			compatible = "free";
+			reg = <0x04000000 0x02000000>;
+			bank-width = <4>;
+		};
+		/* free chipselect */
+		cs7@06000000 {
+			compatible = "free";
+			reg = <0x06000000 0x02000000>;
+			bank-width = <4>;
+		};
+	};
+
+	lpb@f7000000 {
+		compatible = "fsl,lpb";
+		ranges = <0x0 0xf7000000 0x09000000>;
+		#size-cells = <1>;
+		#address-cells = <1>;
+
+		fpga1@00e00000 {
+			compatible = "fpga1";
+			reg = <0x00e00000 0x02000000>;
+			bank-width = <4>;
+		};
+
+		fpga2@02e00000 {
+			compatible = "fpga2";
+			reg = <0x02e00000 0x02000000>;
+			bank-width = <4>;
+		};
+
+		sram@04e00000 {
+			compatible = "mtd-ram";
+			reg = <0x04e00000 0x00200000>;
+			bank-width = <2>;
+		};
+
+		flash@07000000 {
+			compatible = "cfi-flash";
+			reg = <0x07000000 0x02000000>;
+			bank-width = <4>;
+			#size-cells = <1>;
+			#address-cells = <1>;
+
+			partition@0 {
+				label = "ubootl";
+				reg = <0x00000000 0x00040000>;
+			};
+			partition@40000 {
+				label = "kernel";
+				reg = <0x00040000 0x001c0000>;
+			};
+			partition@200000 {
+				label = "jffs2";
+				reg = <0x00200000 0x01d00000>;
+			};
+			partition@1f00000 {
+				label = "uboot";
+				reg = <0x01f00000 0x00040000>;
+			};
+			partition@1f40000 {
+				label = "env";
+				reg = <0x01f40000 0x00040000>;
+			};
+			partition@1f80000 {
+				label = "oftree";
+				reg = <0x01f80000 0x00040000>;
+			};
+			partition@1fc0000 {
+				label = "space";
+				reg = <0x01fc0000 0x00080000>;
+			};
+		};
+	};
+};
diff --git a/arch/powerpc/configs/52xx/pcm032_defconfig b/arch/powerpc/configs/52xx/pcm032_defconfig
new file mode 100644
index 0000000..2969d78
--- /dev/null
+++ b/arch/powerpc/configs/52xx/pcm032_defconfig
@@ -0,0 +1,1394 @@ 
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.29-rc3
+# Wed Feb 25 11:54:59 2009
+#
+# CONFIG_PPC64 is not set
+
+#
+# Processor support
+#
+CONFIG_6xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_8xx is not set
+# CONFIG_40x is not set
+# CONFIG_44x is not set
+# CONFIG_E200 is not set
+CONFIG_PPC_FPU=y
+# CONFIG_ALTIVEC is not set
+CONFIG_PPC_STD_MMU=y
+CONFIG_PPC_STD_MMU_32=y
+# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
+CONFIG_PPC32=y
+CONFIG_WORD_SIZE=32
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
+CONFIG_MMU=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
+CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
+# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
+CONFIG_PPC=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_GENERIC_NVRAM=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_PPC_OF=y
+CONFIG_OF=y
+# CONFIG_PPC_UDBG_16550 is not set
+# CONFIG_GENERIC_TBSYNC is not set
+CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
+CONFIG_DEFAULT_UIMAGE=y
+# CONFIG_PPC_DCR_NATIVE is not set
+# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+# CONFIG_TREE_RCU is not set
+CONFIG_PREEMPT_RCU=y
+# CONFIG_RCU_TRACE is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_CLK=y
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# Platform support
+#
+CONFIG_PPC_MULTIPLATFORM=y
+CONFIG_CLASSIC32=y
+# CONFIG_PPC_CHRP is not set
+# CONFIG_MPC5121_ADS is not set
+# CONFIG_MPC5121_GENERIC is not set
+CONFIG_PPC_MPC52xx=y
+CONFIG_PPC_MPC5200_SIMPLE=y
+# CONFIG_PPC_EFIKA is not set
+# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
+# CONFIG_PPC_MPC5200_BUGFIX is not set
+CONFIG_PPC_MPC5200_GPIO=y
+# CONFIG_PPC_PMAC is not set
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_82xx is not set
+# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_83xx is not set
+# CONFIG_PPC_86xx is not set
+# CONFIG_EMBEDDED6xx is not set
+# CONFIG_IPIC is not set
+# CONFIG_MPIC is not set
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
+# CONFIG_PPC_RTAS is not set
+# CONFIG_MMIO_NVRAM is not set
+# CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
+# CONFIG_PPC_INDIRECT_IO is not set
+# CONFIG_GENERIC_IOMAP is not set
+# CONFIG_CPU_FREQ is not set
+# CONFIG_TAU is not set
+# CONFIG_FSL_ULI1575 is not set
+CONFIG_PPC_BESTCOMM=y
+CONFIG_PPC_BESTCOMM_ATA=m
+CONFIG_PPC_BESTCOMM_FEC=y
+CONFIG_SIMPLE_GPIO=y
+
+#
+# Kernel options
+#
+# CONFIG_HIGHMEM is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_HZ_100=y
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=100
+CONFIG_SCHED_HRTICK=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+# CONFIG_IOMMU_HELPER is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
+CONFIG_ARCH_HAS_WALK_MEMORY=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=11
+# CONFIG_PROC_DEVICETREE is not set
+# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
+# CONFIG_PM is not set
+# CONFIG_SECCOMP is not set
+CONFIG_ISA_DMA_API=y
+
+#
+# Bus options
+#
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_PPC_INDIRECT_PCI is not set
+CONFIG_PPC_PCI_CHOICE=y
+CONFIG_PCI=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_PCIEPORTBUS is not set
+CONFIG_ARCH_SUPPORTS_MSI=y
+# CONFIG_PCI_MSI is not set
+# CONFIG_PCI_LEGACY is not set
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCCARD is not set
+# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+
+#
+# Advanced setup
+#
+# CONFIG_ADVANCED_OPTIONS is not set
+
+#
+# Default settings for advanced configuration options are used
+#
+CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
+CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
+CONFIG_TASK_SIZE=0xc0000000
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_COMPAT_NET_DEV_OPS=y
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+# CONFIG_MTD_QINFO_PROBE is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_I2C=y
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_PHANTOM is not set
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+CONFIG_PATA_MPC52xx=m
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_HAPPYMEAL is not set
+# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_TULIP is not set
+# CONFIG_HP100 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+CONFIG_FEC_MPC52xx=y
+CONFIG_FEC_MPC52xx_MDIO=y
+# CONFIG_ATL2 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+# CONFIG_INPUT is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_UARTLITE is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_SERIAL_MPC52xx=y
+CONFIG_SERIAL_MPC52xx_CONSOLE=y
+CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HVC_UDBG is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_MPC5200_WDT=y
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_SEQUENCER_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_PCI is not set
+CONFIG_SND_PPC=y
+# CONFIG_SND_USB is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_SOC is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+# CONFIG_USB_OHCI_HCD_PCI is not set
+CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
+CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
+# CONFIG_USB_OHCI_LITTLE_ENDIAN is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+#
+
+#
+# see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=m
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=m
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-15"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=y
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
+# CONFIG_CODE_PATCHING_SELFTEST is not set
+# CONFIG_FTR_FIXUP_SELFTEST is not set
+# CONFIG_MSI_BITMAP_SELFTEST is not set
+# CONFIG_XMON is not set
+# CONFIG_IRQSTACKS is not set
+# CONFIG_BDI_SWITCH is not set
+# CONFIG_BOOTX_TEXT is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig
index 0465e5b..75f82ab 100644
--- a/arch/powerpc/platforms/52xx/Kconfig
+++ b/arch/powerpc/platforms/52xx/Kconfig
@@ -24,6 +24,7 @@  config PPC_MPC5200_SIMPLE
 	  are:
 	     intercontrol,digsy-mtc
 	     phytec,pcm030
+	     phytec,pcm032
 	     promess,motionpro
 	     schindler,cm5200
 	     tqc,tqm5200
diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c
index d5e1471..c31e5b5 100644
--- a/arch/powerpc/platforms/52xx/mpc5200_simple.c
+++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c
@@ -51,8 +51,9 @@  static void __init mpc5200_simple_setup_arch(void)
 /* list of the supported boards */
 static char *board[] __initdata = {
 	"intercontrol,digsy-mtc",
-	"promess,motionpro",
 	"phytec,pcm030",
+	"phytec,pcm032",
+	"promess,motionpro",
 	"schindler,cm5200",
 	"tqc,tqm5200",
 	NULL