Patchwork [2/8] rdma: core rdma logic

login
register
mail settings
Submitter mrhines@linux.vnet.ibm.com
Date April 12, 2013, 5:52 a.m.
Message ID <1365745929-24871-3-git-send-email-mrhines@linux.vnet.ibm.com>
Download mbox | patch
Permalink /patch/235967/
State New
Headers show

Comments

mrhines@linux.vnet.ibm.com - April 12, 2013, 5:52 a.m.
From: "Michael R. Hines" <mrhines@us.ibm.com>

 As requested, code that does need to be visible is kept
 well contained inside this file and this is the only
 new additional file to the entire patch - good
 progress.

This file includes the entire protocol and interfaces
required to perform RDMA migration.

Also, the configure and Makefile modifications to link
this file are included.

Full documentation is in docs/rdma.txt

Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
---
 Makefile.objs    |    1 +
 configure        |   29 +
 migration-rdma.c | 2677 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 2707 insertions(+)
 create mode 100644 migration-rdma.c
Paolo Bonzini - April 12, 2013, 11:10 a.m.
Il 12/04/2013 07:52, mrhines@linux.vnet.ibm.com ha scritto:
> 
> + *
> + * If we're using dynamic registration on the server-side, we have to
> + * send a registration command first.
> + */
> +static int __qemu_rdma_write(QEMUFile *f, RDMAContext *rdma,
> +        int current_index,
> +        uint64_t offset, uint64_t length,
> +        uint64_t wr_id, enum ibv_send_flags flag)
> +{

No __ prefix, perhaps call this function qemu_rdma_flush_one?

> +    /*
> +     * Don't pin zero pages on the destination. Just return.
> +     */
> +    if (rdma->chunk_register_destination &&
> +            (buffer_find_nonzero_offset(va, size) == size)) {
> +        return size;
> +    }

Is this the right place to test?  Is it correct if a page first is
non-zero and then becomes zero?  Perhaps you have to test where you add
a page to a chunk, instead.

Paolo
mrhines@linux.vnet.ibm.com - April 12, 2013, 1:29 p.m.
On 04/12/2013 07:10 AM, Paolo Bonzini wrote:
> Il 12/04/2013 07:52, mrhines@linux.vnet.ibm.com ha scritto:
>> + *
>> + * If we're using dynamic registration on the server-side, we have to
>> + * send a registration command first.
>> + */
>> +static int __qemu_rdma_write(QEMUFile *f, RDMAContext *rdma,
>> +        int current_index,
>> +        uint64_t offset, uint64_t length,
>> +        uint64_t wr_id, enum ibv_send_flags flag)
>> +{
> No __ prefix, perhaps call this function qemu_rdma_flush_one?
>
>> +    /*
>> +     * Don't pin zero pages on the destination. Just return.
>> +     */
>> +    if (rdma->chunk_register_destination &&
>> +            (buffer_find_nonzero_offset(va, size) == size)) {
>> +        return size;
>> +    }
> Is this the right place to test?  Is it correct if a page first is
> non-zero and then becomes zero?  Perhaps you have to test where you add
> a page to a chunk, instead.

Oh, thank you. Huge bug  - I need to introduce a "COMPRESS"
message for this page into the protocol just like we already have
for TCP and bypass the current chunk.

I knew I was forgetting about compress - some little angel on my
shoulder was telling me I forgot something but I couldn't remember =)

- Michael
Paolo Bonzini - April 12, 2013, 1:41 p.m.
Il 12/04/2013 15:29, Michael R. Hines ha scritto:
> 
> Oh, thank you. Huge bug  - I need to introduce a "COMPRESS"
> message for this page into the protocol just like we already have
> for TCP and bypass the current chunk.

It's okay to send the page uncompressed if it's been registered already.
 This way you skip most is_zero_page checks after the bulk phase.  I
just care that a page is never registered if it is zero and never changes.

Paolo

> I knew I was forgetting about compress - some little angel on my
> shoulder was telling me I forgot something but I couldn't remember =)
mrhines@linux.vnet.ibm.com - April 12, 2013, 1:49 p.m.
On 04/12/2013 09:41 AM, Paolo Bonzini wrote:
> Il 12/04/2013 15:29, Michael R. Hines ha scritto:
>> Oh, thank you. Huge bug  - I need to introduce a "COMPRESS"
>> message for this page into the protocol just like we already have
>> for TCP and bypass the current chunk.
> It's okay to send the page uncompressed if it's been registered already.
>   This way you skip most is_zero_page checks after the bulk phase.  I
> just care that a page is never registered if it is zero and never changes.
>
> Paolo

Acknowledged.

Patch

diff --git a/Makefile.objs b/Makefile.objs
index e568c01..10431bd 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -49,6 +49,7 @@  common-obj-$(CONFIG_POSIX) += os-posix.o
 common-obj-$(CONFIG_LINUX) += fsdev/
 
 common-obj-y += migration.o migration-tcp.o
+common-obj-$(CONFIG_RDMA) += migration-rdma.o
 common-obj-y += qemu-char.o #aio.o
 common-obj-y += block-migration.o
 common-obj-y += page_cache.o xbzrle.o
diff --git a/configure b/configure
index 1ed939a..8ade7ce 100755
--- a/configure
+++ b/configure
@@ -180,6 +180,7 @@  xfs=""
 
 vhost_net="no"
 kvm="no"
+rdma="yes"
 gprof="no"
 debug_tcg="no"
 debug="no"
@@ -918,6 +919,10 @@  for opt do
   ;;
   --enable-gtk) gtk="yes"
   ;;
+  --enable-rdma) rdma="yes"
+  ;;
+  --disable-rdma) rdma="no"
+  ;;
   --with-gtkabi=*) gtkabi="$optarg"
   ;;
   --enable-tpm) tpm="yes"
@@ -1122,6 +1127,8 @@  echo "  --enable-bluez           enable bluez stack connectivity"
 echo "  --disable-slirp          disable SLIRP userspace network connectivity"
 echo "  --disable-kvm            disable KVM acceleration support"
 echo "  --enable-kvm             enable KVM acceleration support"
+echo "  --disable-rdma           disable RDMA-based migration support"
+echo "  --enable-rdma            enable RDMA-based migration support"
 echo "  --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)"
 echo "  --disable-nptl           disable usermode NPTL support"
 echo "  --enable-nptl            enable usermode NPTL support"
@@ -1767,6 +1774,23 @@  EOF
   libs_softmmu="$sdl_libs $libs_softmmu"
 fi
 
+if test "$rdma" != "no" ; then
+  cat > $TMPC <<EOF
+#include <rdma/rdma_cma.h>
+int main(void) { return 0; }
+EOF
+  rdma_libs="-lrdmacm -libverbs"
+  if compile_prog "-Werror" "$rdma_libs" ; then
+    rdma="yes"
+    libs_softmmu="$libs_softmmu $rdma_libs"
+  else
+    if test "$rdma" = "yes" ; then
+      feature_not_found "rdma"
+    fi
+    rdma="no"
+  fi
+fi
+
 ##########################################
 # VNC TLS/WS detection
 if test "$vnc" = "yes" -a \( "$vnc_tls" != "no" -o "$vnc_ws" != "no" \) ; then
@@ -3408,6 +3432,7 @@  echo "Linux AIO support $linux_aio"
 echo "ATTR/XATTR support $attr"
 echo "Install blobs     $blobs"
 echo "KVM support       $kvm"
+echo "RDMA support      $rdma"
 echo "TCG interpreter   $tcg_interpreter"
 echo "fdt support       $fdt"
 echo "preadv support    $preadv"
@@ -4377,6 +4402,10 @@  if [ "$pixman" = "internal" ]; then
   echo "config-host.h: subdir-pixman" >> $config_host_mak
 fi
 
+if test "$rdma" = "yes" ; then
+echo "CONFIG_RDMA=y" >> $config_host_mak
+fi
+
 # build tree in object directory in case the source is not in the current directory
 DIRS="tests tests/tcg tests/tcg/cris tests/tcg/lm32"
 DIRS="$DIRS pc-bios/optionrom pc-bios/spapr-rtas"
diff --git a/migration-rdma.c b/migration-rdma.c
new file mode 100644
index 0000000..77ecc7e
--- /dev/null
+++ b/migration-rdma.c
@@ -0,0 +1,2677 @@ 
+/*
+ *  Copyright (C) 2013 Michael R. Hines <mrhines@us.ibm.com>
+ *  Copyright (C) 2010 Jiuxing Liu <jl@us.ibm.com>
+ *
+ *  RDMA protocol and interfaces
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; under version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+#include "qemu-common.h"
+#include "migration/migration.h"
+#include "migration/qemu-file.h"
+#include "exec/cpu-common.h"
+#include "qemu/main-loop.h"
+#include "qemu/sockets.h"
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+#include <netdb.h>
+#include <arpa/inet.h>
+#include <string.h>
+#include <rdma/rdma_cma.h>
+
+//#define DEBUG_RDMA
+//#define DEBUG_RDMA_VERBOSE
+
+#ifdef DEBUG_RDMA
+#define DPRINTF(fmt, ...) \
+    do { printf("rdma: " fmt, ## __VA_ARGS__); } while (0)
+#else
+#define DPRINTF(fmt, ...) \
+    do { } while (0)
+#endif
+
+#ifdef DEBUG_RDMA_VERBOSE
+#define DDPRINTF(fmt, ...) \
+    do { printf("rdma: " fmt, ## __VA_ARGS__); } while (0)
+#else
+#define DDPRINTF(fmt, ...) \
+    do { } while (0)
+#endif
+
+#define RDMA_RESOLVE_TIMEOUT_MS 10000
+
+#define RDMA_CHUNK_REGISTRATION
+
+#define RDMA_LAZY_CLIENT_REGISTRATION
+
+/* Do not merge data if larger than this. */
+#define RDMA_MERGE_MAX (4 * 1024 * 1024)
+#define RDMA_UNSIGNALED_SEND_MAX 64
+
+#define RDMA_REG_CHUNK_SHIFT 20 /* 1 MB */
+//#define RDMA_REG_CHUNK_SHIFT 21 /* 2 MB */
+//#define RDMA_REG_CHUNK_SHIFT 22 /* 4 MB */
+//#define RDMA_REG_CHUNK_SHIFT 23 /* 8 MB */
+//#define RDMA_REG_CHUNK_SHIFT 24 /* 16 MB */
+//#define RDMA_REG_CHUNK_SHIFT 25 /* 32 MB */
+//#define RDMA_REG_CHUNK_SHIFT 26 /* 64 MB */
+//#define RDMA_REG_CHUNK_SHIFT 27 /* 128 MB */
+//#define RDMA_REG_CHUNK_SHIFT 28 /* 256 MB */
+
+#define RDMA_REG_CHUNK_SIZE (1UL << (RDMA_REG_CHUNK_SHIFT))
+#define RDMA_REG_CHUNK_INDEX(start_addr, host_addr) \
+            (((unsigned long)(host_addr) >> RDMA_REG_CHUNK_SHIFT) - \
+            ((unsigned long)(start_addr) >> RDMA_REG_CHUNK_SHIFT))
+#define RDMA_REG_NUM_CHUNKS(rdma_ram_block) \
+            (RDMA_REG_CHUNK_INDEX((rdma_ram_block)->local_host_addr,\
+                (rdma_ram_block)->local_host_addr +\
+                (rdma_ram_block)->length) + 1)
+#define RDMA_REG_CHUNK_START(rdma_ram_block, i) ((uint8_t *)\
+            ((((unsigned long)((rdma_ram_block)->local_host_addr) >> \
+                RDMA_REG_CHUNK_SHIFT) + (i)) << \
+                RDMA_REG_CHUNK_SHIFT))
+#define RDMA_REG_CHUNK_END(rdma_ram_block, i) \
+            (RDMA_REG_CHUNK_START(rdma_ram_block, i) + \
+             RDMA_REG_CHUNK_SIZE)
+
+/*
+ * This is only for non-live state being migrated.
+ * Instead of RDMA_WRITE messages, we use RDMA_SEND
+ * messages for that state, which requires a different
+ * delivery design than main memory.
+ */
+#define RDMA_SEND_INCREMENT 32768
+
+#define RDMA_BLOCKING
+/*
+ * Completion queue can be filled by both read and write work requests,
+ * so must reflect the sum of both possible queue sizes.
+ */
+#define RDMA_QP_SIZE 1000
+#define RDMA_CQ_SIZE (RDMA_QP_SIZE * 3)
+
+/*
+ * Maximum size infiniband SEND message
+ */
+#define RDMA_CONTROL_MAX_BUFFER (512 * 1024)
+#define RDMA_CONTROL_MAX_WR 2
+#define RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE 4096
+
+/*
+ * Capabilities for negotiation.
+ */
+#define RDMA_CAPABILITY_CHUNK_REGISTER 0x01
+#define RDMA_CAPABILITY_NEXT_FEATURE   0x02
+
+/*
+ * RDMA migration protocol:
+ * 1. RDMA Writes (data messages, i.e. RAM)
+ * 2. IB Send/Recv (control channel messages)
+ */
+enum {
+    RDMA_WRID_NONE = 0,
+    RDMA_WRID_RDMA_WRITE,
+    RDMA_WRID_SEND_CONTROL = 1000,
+    RDMA_WRID_RECV_CONTROL = 2000,
+};
+
+const char *wrid_desc[] = {
+        [RDMA_WRID_NONE] = "NONE",
+        [RDMA_WRID_RDMA_WRITE] = "WRITE RDMA",
+        [RDMA_WRID_SEND_CONTROL] = "CONTROL SEND",
+        [RDMA_WRID_RECV_CONTROL] = "CONTROL RECV",
+};
+
+/*
+ * SEND/RECV IB Control Messages.
+ */
+enum {
+    RDMA_CONTROL_NONE = 0,
+    RDMA_CONTROL_READY,                    /* ready to receive */
+    RDMA_CONTROL_QEMU_FILE,                /* QEMUFile-transmitted bytes */
+    RDMA_CONTROL_RAM_BLOCKS,               /* RAMBlock synchronization */
+    RDMA_CONTROL_REGISTER_REQUEST,         /* dynamic page registration */
+    RDMA_CONTROL_REGISTER_RESULT,          /* key to use after registration */
+    RDMA_CONTROL_REGISTER_FINISHED,        /* current iteration finished */
+};
+
+const char *control_desc[] = {
+        [RDMA_CONTROL_NONE] = "NONE",
+        [RDMA_CONTROL_READY] = "READY",
+        [RDMA_CONTROL_QEMU_FILE] = "QEMU FILE",
+        [RDMA_CONTROL_RAM_BLOCKS] = "REMOTE INFO",
+        [RDMA_CONTROL_REGISTER_REQUEST] = "REGISTER REQUEST",
+        [RDMA_CONTROL_REGISTER_RESULT] = "REGISTER RESULT",
+        [RDMA_CONTROL_REGISTER_FINISHED] = "REGISTER FINISHED",
+};
+
+/*
+ * Memory and MR structures used to represent an IB Send/Recv work request.
+ * This is *not* used for RDMA, only IB Send/Recv.
+ */
+typedef struct {
+    uint8_t  control[RDMA_CONTROL_MAX_BUFFER]; /* actual buffer to register */
+    struct   ibv_mr *control_mr;               /* registration metadata */
+    size_t   control_len;                      /* length of the message */
+    uint8_t *control_curr;                     /* start of unconsumed bytes */
+} RDMAWorkRequestData;
+
+/*
+ * Negotiate RDMA capabilities during connection-setup time.
+ */
+typedef struct {
+    uint32_t version;
+    uint32_t flags;
+} RDMACapabilities;
+
+/*
+ * Main data structure for RDMA state.
+ * While there is only one copy of this structure being allocated right now,
+ * this is the place where one would start if you wanted to consider
+ * having more than one RDMA connection open at the same time.
+ */
+typedef struct RDMAContext {
+    char *host;
+    int port;
+
+    /* This is used by the migration protocol to transmit
+     * control messages (such as device state and registration commands)
+     *
+     * WR #0 is for control channel ready messages from the server.
+     * WR #1 is for control channel data messages from the server.
+     * WR #2 is for control channel send messages.
+     *
+     * We could use more WRs, but we have enough for now.
+     */
+    RDMAWorkRequestData wr_data[RDMA_CONTROL_MAX_WR + 1];
+
+    /*
+     * This is used by *_exchange_send() to figure out whether or not
+     * the initial "READY" message has already been received or not.
+     * This is because other functions may potentially poll() and detect
+     * the READY message before send() does, in which case we need to
+     * know if it completed.
+     */
+    int control_ready_expected;
+
+    /* The rest is only for the initiator of the migration. */
+    int client_init_done;
+
+    /* number of outstanding unsignaled send */
+    int num_unsignaled_send;
+
+    /* number of outstanding signaled send */
+    int num_signaled_send;
+
+    /* store info about current buffer so that we can
+       merge it with future sends */
+    uint64_t current_offset;
+    uint64_t current_length;
+    /* index of ram block the current buffer belongs to */
+    int current_index;
+    /* index of the chunk in the current ram block */
+    int current_chunk;
+
+    bool chunk_register_destination;
+
+    /*
+     * infiniband-specific variables for opening the device
+     * and maintaining connection state and so forth.
+     *
+     * cm_id also has ibv_context, rdma_event_channel, and ibv_qp in
+     * cm_id->verbs, cm_id->channel, and cm_id->qp.
+     */
+    struct rdma_cm_id *cm_id;               /* connection manager ID */
+    struct rdma_cm_id *listen_id;
+
+    struct ibv_context *verbs;
+    struct rdma_event_channel *channel;
+    struct ibv_qp *qp;                      /* queue pair */
+    struct ibv_comp_channel *comp_channel;  /* completion channel */
+    struct ibv_pd *pd;                      /* protection domain */
+    struct ibv_cq *cq;                      /* completion queue */
+} RDMAContext;
+
+/*
+ * Interface to the rest of the migration call stack.
+ */
+typedef struct QEMUFileRDMA {
+    RDMAContext *rdma;
+    size_t len;
+    void *file;
+} QEMUFileRDMA;
+
+/*
+ * Representation of a RAMBlock from an RDMA perspective.
+ * This an subsequent structures cannot be linked lists
+ * because we're using a single IB message to transmit
+ * the information. It's small anyway, so a list is overkill.
+ */
+typedef struct RDMALocalBlock {
+    uint8_t  *local_host_addr; /* local virtual address */
+    uint64_t remote_host_addr; /* remote virtual address */
+    uint64_t offset;
+    uint64_t length;
+    struct   ibv_mr **pmr;     /* MRs for chunk-level registration */
+    struct   ibv_mr *mr;       /* MR for non-chunk-level registration */
+    uint32_t *remote_keys;     /* rkeys for chunk-level registration */
+    uint32_t remote_rkey;      /* rkeys for non-chunk-level registration */
+} RDMALocalBlock;
+
+/*
+ * Also represents a RAMblock, but only on the server.
+ * This gets transmitted by the server during connection-time
+ * to the client / primary VM and then is used to populate the
+ * corresponding RDMALocalBlock with
+ * the information needed to perform the actual RDMA.
+ *
+ */
+typedef struct RDMARemoteBlock {
+    uint64_t remote_host_addr;
+    uint64_t offset;
+    uint64_t length;
+    uint32_t remote_rkey;
+} RDMARemoteBlock;
+
+/*
+ * Virtual address of the above structures used for transmitting
+ * the RAMBlock descriptions at connection-time.
+ */
+typedef struct RDMALocalBlocks {
+    int num_blocks;
+    RDMALocalBlock *block;
+} RDMALocalBlocks;
+
+/*
+ * Same as above
+ */
+typedef struct RDMARemoteBlocks {
+    int *num_blocks;
+    RDMARemoteBlock *block;
+    void *remote_area;
+    int remote_size;
+} RDMARemoteBlocks;
+
+#define RDMA_CONTROL_VERSION_1      1
+//#define RDMA_CONTROL_VERSION_2      2  /* next version */
+#define RDMA_CONTROL_VERSION_MAX    1
+#define RDMA_CONTROL_VERSION_MIN    1    /* change on next version */
+
+#define RDMA_CONTROL_CURRENT_VERSION RDMA_CONTROL_VERSION_1
+
+/*
+ * Main structure for IB Send/Recv control messages.
+ * This gets prepended at the beginning of every Send/Recv.
+ */
+typedef struct {
+    uint32_t    len;     /* Total length of data portion */
+    uint32_t    type;    /* which control command to perform */
+    uint32_t    version; /* version */
+    uint32_t    repeat;  /* number of commands in data portion of same type */
+} RDMAControlHeader;
+
+/*
+ * Register a single Chunk.
+ * Information sent by the primary VM to inform the server
+ * to register an single chunk of memory before we can perform
+ * the actual RDMA operation.
+ */
+typedef struct {
+    uint32_t   len;              /* length of the chunk to be registered */
+    uint32_t   current_index;    /* which ramblock the chunk belongs to */
+    uint64_t   offset;           /* offset into the ramblock of the chunk */
+} RDMARegister;
+
+/*
+ * The result of the server's memory registration produces an "rkey"
+ * which the primary VM must reference in order to perform
+ * the RDMA operation.
+ */
+typedef struct {
+    uint32_t rkey;
+} RDMARegisterResult;
+
+#define RDMAControlHeaderSize sizeof(RDMAControlHeader)
+
+RDMALocalBlocks local_ram_blocks;
+RDMARemoteBlocks remote_ram_blocks;
+
+/*
+ * Memory regions need to be registered with the device and queue pairs setup
+ * in advanced before the migration starts. This tells us where the RAM blocks
+ * are so that we can register them individually.
+ */
+static void qemu_rdma_init_one_block(void *host_addr,
+    ram_addr_t offset, ram_addr_t length, void *opaque)
+{
+    RDMALocalBlocks *rdma_local_ram_blocks = opaque;
+    int num_blocks = rdma_local_ram_blocks->num_blocks;
+
+    rdma_local_ram_blocks->block[num_blocks].local_host_addr = host_addr;
+    rdma_local_ram_blocks->block[num_blocks].offset = (uint64_t)offset;
+    rdma_local_ram_blocks->block[num_blocks].length = (uint64_t)length;
+    rdma_local_ram_blocks->num_blocks++;
+}
+
+static void qemu_rdma_ram_block_counter(void *host_addr,
+    ram_addr_t offset, ram_addr_t length, void *opaque)
+{
+    int *num_blocks = opaque;
+    *num_blocks = *num_blocks + 1;
+}
+
+/*
+ * Identify the RAMBlocks and their quantity. They will be references to
+ * identify chunk boundaries inside each RAMBlock and also be referenced
+ * during dynamic page registration.
+ */
+static int qemu_rdma_init_ram_blocks(RDMALocalBlocks *rdma_local_ram_blocks)
+{
+    int num_blocks = 0;
+
+    qemu_ram_foreach_block(qemu_rdma_ram_block_counter, &num_blocks);
+
+    memset(rdma_local_ram_blocks, 0, sizeof *rdma_local_ram_blocks);
+    rdma_local_ram_blocks->block = g_malloc0(sizeof(RDMALocalBlock) *
+                                    num_blocks);
+
+    rdma_local_ram_blocks->num_blocks = 0;
+    qemu_ram_foreach_block(qemu_rdma_init_one_block, rdma_local_ram_blocks);
+
+    DPRINTF("Allocated %d local ram block structures\n",
+                    rdma_local_ram_blocks->num_blocks);
+    return 0;
+}
+
+/*
+ * Put in the log file which RDMA device was opened and the details
+ * associated with that device.
+ */
+static void qemu_rdma_dump_id(const char *who, struct ibv_context *verbs)
+{
+    printf("%s RDMA Device opened: kernel name %s "
+           "uverbs device name %s, "
+           "infiniband_verbs class device path %s,"
+           " infiniband class device path %s\n",
+                who,
+                verbs->device->name,
+                verbs->device->dev_name,
+                verbs->device->dev_path,
+                verbs->device->ibdev_path);
+}
+
+/*
+ * Put in the log file the RDMA gid addressing information,
+ * useful for folks who have trouble understanding the
+ * RDMA device hierarchy in the kernel.
+ */
+static void qemu_rdma_dump_gid(const char *who, struct rdma_cm_id *id)
+{
+    char sgid[33];
+    char dgid[33];
+    inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.sgid, sgid, sizeof sgid);
+    inet_ntop(AF_INET6, &id->route.addr.addr.ibaddr.dgid, dgid, sizeof dgid);
+    DPRINTF("%s Source GID: %s, Dest GID: %s\n", who, sgid, dgid);
+}
+
+/*
+ * Figure out which RDMA device corresponds to the requested IP hostname
+ * Also create the initial connection manager identifiers for opening
+ * the connection.
+ */
+static int qemu_rdma_resolve_host(RDMAContext *rdma)
+{
+    int ret;
+    struct addrinfo *res;
+    char port_str[16];
+    struct rdma_cm_event *cm_event;
+    char ip[40] = "unknown";
+
+    if (rdma->host == NULL || !strcmp(rdma->host, "")) {
+        fprintf(stderr, "RDMA hostname has not been set\n");
+        return -1;
+    }
+
+    /* create CM channel */
+    rdma->channel = rdma_create_event_channel();
+    if (!rdma->channel) {
+        fprintf(stderr, "could not create CM channel\n");
+        return -1;
+    }
+
+    /* create CM id */
+    ret = rdma_create_id(rdma->channel, &rdma->cm_id, NULL, RDMA_PS_TCP);
+    if (ret) {
+        fprintf(stderr, "could not create channel id\n");
+        goto err_resolve_create_id;
+    }
+
+    snprintf(port_str, 16, "%d", rdma->port);
+    port_str[15] = '\0';
+
+    ret = getaddrinfo(rdma->host, port_str, NULL, &res);
+    if (ret < 0) {
+        fprintf(stderr, "could not getaddrinfo destination address %s\n",
+                        rdma->host);
+        goto err_resolve_get_addr;
+    }
+
+    inet_ntop(AF_INET, &((struct sockaddr_in *) res->ai_addr)->sin_addr,
+                                ip, sizeof ip);
+    printf("%s => %s\n", rdma->host, ip);
+
+    /* resolve the first address */
+    ret = rdma_resolve_addr(rdma->cm_id, NULL, res->ai_addr,
+            RDMA_RESOLVE_TIMEOUT_MS);
+    if (ret) {
+        fprintf(stderr, "could not resolve address %s\n", rdma->host);
+        goto err_resolve_get_addr;
+    }
+
+    qemu_rdma_dump_gid("client_resolve_addr", rdma->cm_id);
+
+    ret = rdma_get_cm_event(rdma->channel, &cm_event);
+    if (ret) {
+        fprintf(stderr, "could not perform event_addr_resolved\n");
+        goto err_resolve_get_addr;
+    }
+
+    if (cm_event->event != RDMA_CM_EVENT_ADDR_RESOLVED) {
+        fprintf(stderr, "result not equal to event_addr_resolved %s\n",
+                rdma_event_str(cm_event->event));
+        perror("rdma_resolve_addr");
+        rdma_ack_cm_event(cm_event);
+        goto err_resolve_get_addr;
+    }
+    rdma_ack_cm_event(cm_event);
+
+    /* resolve route */
+    ret = rdma_resolve_route(rdma->cm_id, RDMA_RESOLVE_TIMEOUT_MS);
+    if (ret) {
+        fprintf(stderr, "could not resolve rdma route\n");
+        goto err_resolve_get_addr;
+    }
+
+    ret = rdma_get_cm_event(rdma->channel, &cm_event);
+    if (ret) {
+        fprintf(stderr, "could not perform event_route_resolved\n");
+        goto err_resolve_get_addr;
+    }
+    if (cm_event->event != RDMA_CM_EVENT_ROUTE_RESOLVED) {
+        fprintf(stderr, "result not equal to event_route_resolved: %s\n",
+                        rdma_event_str(cm_event->event));
+        rdma_ack_cm_event(cm_event);
+        goto err_resolve_get_addr;
+    }
+    rdma_ack_cm_event(cm_event);
+    rdma->verbs = rdma->cm_id->verbs;
+    qemu_rdma_dump_id("client_resolve_host", rdma->cm_id->verbs);
+    qemu_rdma_dump_gid("client_resolve_host", rdma->cm_id);
+    return 0;
+
+err_resolve_get_addr:
+    rdma_destroy_id(rdma->cm_id);
+err_resolve_create_id:
+    rdma_destroy_event_channel(rdma->channel);
+    rdma->channel = NULL;
+
+    return -1;
+}
+
+/*
+ * Create protection domain and completion queues
+ */
+static int qemu_rdma_alloc_pd_cq(RDMAContext *rdma)
+{
+    /* allocate pd */
+    rdma->pd = ibv_alloc_pd(rdma->verbs);
+    if (!rdma->pd) {
+        return -1;
+    }
+
+#ifdef RDMA_BLOCKING
+    /* create completion channel */
+    rdma->comp_channel = ibv_create_comp_channel(rdma->verbs);
+    if (!rdma->comp_channel) {
+        goto err_alloc_pd_cq;
+    }
+#endif
+
+    /* create cq */
+    rdma->cq = ibv_create_cq(rdma->verbs, RDMA_CQ_SIZE,
+            NULL, rdma->comp_channel, 0);
+    if (!rdma->cq) {
+        goto err_alloc_pd_cq;
+    }
+
+    return 0;
+
+err_alloc_pd_cq:
+    if (rdma->pd) {
+        ibv_dealloc_pd(rdma->pd);
+    }
+    if (rdma->comp_channel) {
+        ibv_destroy_comp_channel(rdma->comp_channel);
+    }
+    rdma->pd = NULL;
+    rdma->comp_channel = NULL;
+    return -1;
+
+}
+
+/*
+ * Create queue pairs.
+ */
+static int qemu_rdma_alloc_qp(RDMAContext *rdma)
+{
+    struct ibv_qp_init_attr attr = { 0 };
+    int ret;
+
+    attr.cap.max_send_wr = RDMA_QP_SIZE;
+    attr.cap.max_recv_wr = 3;
+    attr.cap.max_send_sge = 1;
+    attr.cap.max_recv_sge = 1;
+    attr.send_cq = rdma->cq;
+    attr.recv_cq = rdma->cq;
+    attr.qp_type = IBV_QPT_RC;
+
+    ret = rdma_create_qp(rdma->cm_id, rdma->pd, &attr);
+    if (ret) {
+        return -1;
+    }
+
+    rdma->qp = rdma->cm_id->qp;
+    return 0;
+}
+
+static int qemu_rdma_get_fd(void *opaque)
+{
+    return -2;
+}
+
+/*
+ * This is probably dead code, but its here anyway for testing.
+ * Sometimes nice to know the performance tradeoffs of pinning.
+ */
+#if !defined(RDMA_LAZY_CLIENT_REGISTRATION)
+static int qemu_rdma_reg_chunk_ram_blocks(RDMAContext *rdma,
+        RDMALocalBlocks *rdma_local_ram_blocks)
+{
+    int i, j;
+    for (i = 0; i < rdma_local_ram_blocks->num_blocks; i++) {
+        RDMALocalBlock *block = &(rdma_local_ram_blocks->block[i]);
+        int num_chunks = RDMA_REG_NUM_CHUNKS(block);
+        /* allocate memory to store chunk MRs */
+        rdma_local_ram_blocks->block[i].pmr = g_malloc0(
+                                num_chunks * sizeof(struct ibv_mr *));
+
+        if (!block->pmr) {
+            goto err_reg_chunk_ram_blocks;
+        }
+
+        for (j = 0; j < num_chunks; j++) {
+            uint8_t *start_addr = RDMA_REG_CHUNK_START(block, j);
+            uint8_t *end_addr = RDMA_REG_CHUNK_END(block, j);
+            if (start_addr < block->local_host_addr) {
+                start_addr = block->local_host_addr;
+            }
+            if (end_addr > block->local_host_addr + block->length) {
+                end_addr = block->local_host_addr + block->length;
+            }
+            block->pmr[j] = ibv_reg_mr(rdma->pd,
+                                start_addr,
+                                end_addr - start_addr,
+                                IBV_ACCESS_REMOTE_READ
+                                );
+            if (!block->pmr[j]) {
+                break;
+            }
+        }
+        if (j < num_chunks) {
+            for (j--; j >= 0; j--) {
+                ibv_dereg_mr(block->pmr[j]);
+            }
+            block->pmr[i] = NULL;
+            goto err_reg_chunk_ram_blocks;
+        }
+    }
+
+    return 0;
+
+err_reg_chunk_ram_blocks:
+    for (i--; i >= 0; i--) {
+        int num_chunks =
+            RDMA_REG_NUM_CHUNKS(&(rdma_local_ram_blocks->block[i]));
+        for (j = 0; j < num_chunks; j++) {
+            ibv_dereg_mr(rdma_local_ram_blocks->block[i].pmr[j]);
+        }
+        free(rdma_local_ram_blocks->block[i].pmr);
+        rdma_local_ram_blocks->block[i].pmr = NULL;
+    }
+
+    return -1;
+
+}
+#endif
+
+/*
+ * Also probably dead code, but for the same reason, its nice
+ * to know the performance tradeoffs of dynamic registration
+ * on both sides of the connection.
+ */
+static int qemu_rdma_reg_whole_ram_blocks(RDMAContext *rdma,
+                                RDMALocalBlocks *rdma_local_ram_blocks)
+{
+    int i;
+    for (i = 0; i < rdma_local_ram_blocks->num_blocks; i++) {
+        rdma_local_ram_blocks->block[i].mr =
+            ibv_reg_mr(rdma->pd,
+                    rdma_local_ram_blocks->block[i].local_host_addr,
+                    rdma_local_ram_blocks->block[i].length,
+                    IBV_ACCESS_LOCAL_WRITE |
+                    IBV_ACCESS_REMOTE_WRITE
+                    );
+        if (!rdma_local_ram_blocks->block[i].mr) {
+            fprintf(stderr, "Failed to register local server ram block!\n");
+            break;
+        }
+    }
+
+    if (i >= rdma_local_ram_blocks->num_blocks) {
+        return 0;
+    }
+
+    for (i--; i >= 0; i--) {
+        ibv_dereg_mr(rdma_local_ram_blocks->block[i].mr);
+    }
+
+    return -1;
+
+}
+
+static int qemu_rdma_client_reg_ram_blocks(RDMAContext *rdma,
+                                RDMALocalBlocks *rdma_local_ram_blocks)
+{
+#ifdef RDMA_CHUNK_REGISTRATION
+#ifdef RDMA_LAZY_CLIENT_REGISTRATION
+    return 0;
+#else
+    return qemu_rdma_reg_chunk_ram_blocks(rdma, rdma_local_ram_blocks);
+#endif
+#else
+    return qemu_rdma_reg_whole_ram_blocks(rdma, rdma_local_ram_blocks);
+#endif
+}
+
+static int qemu_rdma_server_reg_ram_blocks(RDMAContext *rdma,
+                                RDMALocalBlocks *rdma_local_ram_blocks)
+{
+    return qemu_rdma_reg_whole_ram_blocks(rdma, rdma_local_ram_blocks);
+}
+
+/*
+ * Shutdown and clean things up.
+ */
+static void qemu_rdma_dereg_ram_blocks(RDMALocalBlocks *rdma_local_ram_blocks)
+{
+    int i, j;
+    for (i = 0; i < rdma_local_ram_blocks->num_blocks; i++) {
+        int num_chunks;
+        if (!rdma_local_ram_blocks->block[i].pmr) {
+            continue;
+        }
+        num_chunks = RDMA_REG_NUM_CHUNKS(&(rdma_local_ram_blocks->block[i]));
+        for (j = 0; j < num_chunks; j++) {
+            if (!rdma_local_ram_blocks->block[i].pmr[j]) {
+                continue;
+            }
+            ibv_dereg_mr(rdma_local_ram_blocks->block[i].pmr[j]);
+        }
+        free(rdma_local_ram_blocks->block[i].pmr);
+        rdma_local_ram_blocks->block[i].pmr = NULL;
+    }
+    for (i = 0; i < rdma_local_ram_blocks->num_blocks; i++) {
+        if (!rdma_local_ram_blocks->block[i].mr) {
+            continue;
+        }
+        ibv_dereg_mr(rdma_local_ram_blocks->block[i].mr);
+        rdma_local_ram_blocks->block[i].mr = NULL;
+    }
+}
+
+/*
+ * Server uses this to prepare to transmit the RAMBlock descriptions
+ * to the primary VM after connection setup.
+ * Both sides use the "remote" structure to communicate and update
+ * their "local" descriptions with what was sent.
+ */
+static void qemu_rdma_copy_to_remote_ram_blocks(RDMAContext *rdma,
+                                                RDMALocalBlocks *local,
+                                                RDMARemoteBlocks *remote)
+{
+    int i;
+    DPRINTF("Allocating %d remote ram block structures\n", local->num_blocks);
+    *remote->num_blocks = local->num_blocks;
+
+    for (i = 0; i < local->num_blocks; i++) {
+            remote->block[i].remote_host_addr =
+                (uint64_t)(local->block[i].local_host_addr);
+
+            if (rdma->chunk_register_destination == false) {
+                remote->block[i].remote_rkey = local->block[i].mr->rkey;
+            }
+
+            remote->block[i].offset = local->block[i].offset;
+            remote->block[i].length = local->block[i].length;
+    }
+}
+
+/*
+ * Client then propogates the remote ram block descriptions to his local copy.
+ * Really, only the virtual addresses are useful, but we propogate everything
+ * anyway.
+ *
+ * If we're using dynamic registration on the server side (the default), then
+ * the 'rkeys' are not useful because we will re-ask for them later during
+ * runtime.
+ */
+static int qemu_rdma_process_remote_ram_blocks(RDMALocalBlocks *local,
+                                               RDMARemoteBlocks *remote)
+{
+    int i, j;
+
+    if (local->num_blocks != *remote->num_blocks) {
+        fprintf(stderr, "local %d != remote %d\n",
+            local->num_blocks, *remote->num_blocks);
+        return -1;
+    }
+
+    for (i = 0; i < *remote->num_blocks; i++) {
+        /* search local ram blocks */
+        for (j = 0; j < local->num_blocks; j++) {
+            if (remote->block[i].offset != local->block[j].offset) {
+                continue;
+            }
+            if (remote->block[i].length != local->block[j].length) {
+                return -1;
+            }
+            local->block[j].remote_host_addr =
+                remote->block[i].remote_host_addr;
+            local->block[j].remote_rkey = remote->block[i].remote_rkey;
+            break;
+        }
+        if (j >= local->num_blocks) {
+            return -1;
+        }
+    }
+
+    return 0;
+}
+
+/*
+ * Find the ram block that corresponds to the page requested to be
+ * transmitted by QEMU.
+ *
+ * Once the block is found, also identify which 'chunk' within that
+ * block that the page belongs to.
+ *
+ * This search cannot fail or the migration will fail.
+ */
+static int qemu_rdma_search_ram_block(uint64_t offset, uint64_t length,
+        RDMALocalBlocks *blocks, int *block_index, int *chunk_index)
+{
+    int i;
+    for (i = 0; i < blocks->num_blocks; i++) {
+        if (offset < blocks->block[i].offset) {
+            continue;
+        }
+        if (offset + length >
+                blocks->block[i].offset + blocks->block[i].length) {
+            continue;
+        }
+        *block_index = i;
+        if (chunk_index) {
+            uint8_t *host_addr = blocks->block[i].local_host_addr +
+                (offset - blocks->block[i].offset);
+            *chunk_index = RDMA_REG_CHUNK_INDEX(
+                    blocks->block[i].local_host_addr, host_addr);
+        }
+        return 0;
+    }
+    return -1;
+}
+
+/*
+ * Register a chunk with IB. If the chunk was already registered
+ * previously, then skip.
+ *
+ * Also return the keys associated with the registration needed
+ * to perform the actual RDMA operation.
+ */
+static int qemu_rdma_register_and_get_keys(RDMAContext *rdma,
+        RDMALocalBlock *block, uint64_t host_addr,
+        uint32_t *lkey, uint32_t *rkey)
+{
+    int chunk;
+    if (block->mr) {
+        if (lkey) {
+            *lkey = block->mr->lkey;
+        }
+        if (rkey) {
+            *rkey = block->mr->rkey;
+        }
+        return 0;
+    }
+
+    /* allocate memory to store chunk MRs */
+    if (!block->pmr) {
+        int num_chunks = RDMA_REG_NUM_CHUNKS(block);
+        block->pmr = g_malloc0(num_chunks *
+                sizeof(struct ibv_mr *));
+        if (!block->pmr) {
+            return -1;
+        }
+    }
+
+    /*
+     * If 'rkey', then we're the server performing a dynamic
+     * registration, so grant access to the client.
+     *
+     * If 'lkey', then we're the primary VM performing a dynamic
+     * registration, so grant access only to ourselves.
+     */
+    chunk = RDMA_REG_CHUNK_INDEX(block->local_host_addr, host_addr);
+    if (!block->pmr[chunk]) {
+        uint8_t *start_addr = RDMA_REG_CHUNK_START(block, chunk);
+        uint8_t *end_addr = RDMA_REG_CHUNK_END(block, chunk);
+        if (start_addr < block->local_host_addr) {
+            start_addr = block->local_host_addr;
+        }
+        if (end_addr > block->local_host_addr + block->length) {
+            end_addr = block->local_host_addr + block->length;
+        }
+        block->pmr[chunk] = ibv_reg_mr(rdma->pd,
+                start_addr,
+                end_addr - start_addr,
+                (rkey ? (IBV_ACCESS_LOCAL_WRITE |
+                            IBV_ACCESS_REMOTE_WRITE) : 0)
+                | IBV_ACCESS_REMOTE_READ);
+        if (!block->pmr[chunk]) {
+            fprintf(stderr, "Failed to register chunk!\n");
+            return -1;
+        }
+    }
+
+    if (lkey) {
+        *lkey = block->pmr[chunk]->lkey;
+    }
+    if (rkey) {
+        *rkey = block->pmr[chunk]->rkey;
+    }
+    return 0;
+}
+
+/*
+ * Register (at connection time) the memory used for control
+ * channel messages.
+ */
+static int qemu_rdma_reg_control(RDMAContext *rdma, int idx)
+{
+    rdma->wr_data[idx].control_mr = ibv_reg_mr(rdma->pd,
+            rdma->wr_data[idx].control, RDMA_CONTROL_MAX_BUFFER,
+            IBV_ACCESS_LOCAL_WRITE |
+            IBV_ACCESS_REMOTE_WRITE |
+            IBV_ACCESS_REMOTE_READ);
+    if (rdma->wr_data[idx].control_mr) {
+        return 0;
+    }
+    return -1;
+}
+
+static int qemu_rdma_dereg_control(RDMAContext *rdma, int idx)
+{
+    return ibv_dereg_mr(rdma->wr_data[idx].control_mr);
+}
+
+#if defined(DEBUG_RDMA) || defined(DEBUG_RDMA_VERBOSE)
+static const char *print_wrid(int wrid)
+{
+    if (wrid >= RDMA_WRID_RECV_CONTROL) {
+        return wrid_desc[RDMA_WRID_RECV_CONTROL];
+    }
+    return wrid_desc[wrid];
+}
+#endif
+
+/*
+ * Consult the connection manager to see a work request
+ * (of any kind) has completed.
+ * Return the work request ID that completed.
+ */
+static int qemu_rdma_poll(RDMAContext *rdma)
+{
+    int ret;
+    struct ibv_wc wc;
+
+    ret = ibv_poll_cq(rdma->cq, 1, &wc);
+    if (!ret) {
+        return RDMA_WRID_NONE;
+    }
+    if (ret < 0) {
+        fprintf(stderr, "ibv_poll_cq return %d!\n", ret);
+        return ret;
+    }
+    if (wc.status != IBV_WC_SUCCESS) {
+        fprintf(stderr, "ibv_poll_cq wc.status=%d %s!\n",
+                        wc.status, ibv_wc_status_str(wc.status));
+        fprintf(stderr, "ibv_poll_cq wrid=%s!\n", wrid_desc[wc.wr_id]);
+
+        return -1;
+    }
+
+    if (rdma->control_ready_expected &&
+        (wc.wr_id >= RDMA_WRID_RECV_CONTROL)) {
+        DPRINTF("completion %s #%" PRId64 " received (%" PRId64 ")\n",
+            wrid_desc[RDMA_WRID_RECV_CONTROL], wc.wr_id -
+            RDMA_WRID_RECV_CONTROL, wc.wr_id);
+        rdma->control_ready_expected = 0;
+    }
+
+    if (wc.wr_id == RDMA_WRID_RDMA_WRITE) {
+        rdma->num_signaled_send--;
+        DPRINTF("completions %s (%" PRId64 ") left %d\n",
+            print_wrid(wc.wr_id), wc.wr_id, rdma->num_signaled_send);
+    } else {
+        DPRINTF("other completion %s (%" PRId64 ") received left %d\n",
+            print_wrid(wc.wr_id), wc.wr_id, rdma->num_signaled_send);
+    }
+
+    return  (int)wc.wr_id;
+}
+
+/*
+ * Block until the next work request has completed.
+ *
+ * First poll to see if a work request has already completed,
+ * otherwise block.
+ *
+ * If we encounter completed work requests for IDs other than
+ * the one we're interested in, then that's generally an error.
+ *
+ * The only exception is actual RDMA Write completions. These
+ * completions only need to be recorded, but do not actually
+ * need further processing.
+ */
+#ifdef RDMA_BLOCKING
+static int qemu_rdma_block_for_wrid(RDMAContext *rdma, int wrid)
+{
+    int num_cq_events = 0;
+    int r = RDMA_WRID_NONE;
+    struct ibv_cq *cq;
+    void *cq_ctx;
+
+    if (ibv_req_notify_cq(rdma->cq, 0)) {
+        return -1;
+    }
+    /* poll cq first */
+    while (r != wrid) {
+        r = qemu_rdma_poll(rdma);
+        if (r < 0) {
+            return r;
+        }
+        if (r == RDMA_WRID_NONE) {
+            break;
+        }
+        if (r != wrid) {
+            DPRINTF("A Wanted wrid %s (%d) but got %s (%d)\n",
+                print_wrid(wrid), wrid, print_wrid(r), r);
+        }
+    }
+    if (r == wrid) {
+        return 0;
+    }
+
+    while (1) {
+        if (ibv_get_cq_event(rdma->comp_channel, &cq, &cq_ctx)) {
+            goto err_block_for_wrid;
+        }
+        num_cq_events++;
+        if (ibv_req_notify_cq(cq, 0)) {
+            goto err_block_for_wrid;
+        }
+        /* poll cq */
+        while (r != wrid) {
+            r = qemu_rdma_poll(rdma);
+            if (r < 0) {
+                goto err_block_for_wrid;
+            }
+            if (r == RDMA_WRID_NONE) {
+                break;
+            }
+            if (r != wrid) {
+                DPRINTF("B Wanted wrid %s (%d) but got %s (%d)\n",
+                    print_wrid(wrid), wrid, print_wrid(r), r);
+            }
+        }
+        if (r == wrid) {
+            goto success_block_for_wrid;
+        }
+    }
+
+success_block_for_wrid:
+    if (num_cq_events) {
+        ibv_ack_cq_events(cq, num_cq_events);
+    }
+    return 0;
+
+err_block_for_wrid:
+    if (num_cq_events) {
+        ibv_ack_cq_events(cq, num_cq_events);
+    }
+    return -1;
+}
+#else
+static int qemu_rdma_poll_for_wrid(RDMAContext *rdma, int wrid)
+{
+    int r = RDMA_WRID_NONE;
+    while (r != wrid) {
+        r = qemu_rdma_poll(rdma);
+        if (r < 0) {
+            return r;
+        }
+    }
+    return 0;
+}
+#endif
+
+
+static int wait_for_wrid(RDMAContext *rdma, int wrid)
+{
+#ifdef RDMA_BLOCKING
+    return qemu_rdma_block_for_wrid(rdma, wrid);
+#else
+    return qemu_rdma_poll_for_wrid(rdma, wrid);
+#endif
+}
+
+static void control_to_network(RDMAControlHeader *control)
+{
+    control->version = htonl(control->version);
+    control->type = htonl(control->type);
+    control->len = htonl(control->len);
+    control->repeat = htonl(control->repeat);
+}
+
+static void network_to_control(RDMAControlHeader *control)
+{
+    control->version = ntohl(control->version);
+    control->type = ntohl(control->type);
+    control->len = ntohl(control->len);
+    control->repeat = ntohl(control->repeat);
+}
+
+/*
+ * Post a SEND message work request for the control channel
+ * containing some data and block until the post completes.
+ */
+static int qemu_rdma_post_send_control(RDMAContext *rdma, uint8_t *buf,
+                                       RDMAControlHeader *head)
+{
+    int ret = 0;
+    RDMAWorkRequestData *wr = &rdma->wr_data[RDMA_CONTROL_MAX_WR];
+    struct ibv_send_wr *bad_wr;
+    struct ibv_sge sge = {
+                           .addr = (uint64_t)(wr->control),
+                           .length = head->len + RDMAControlHeaderSize,
+                           .lkey = wr->control_mr->lkey,
+                         };
+    struct ibv_send_wr send_wr = {
+                                   .wr_id = RDMA_WRID_SEND_CONTROL,
+                                   .opcode = IBV_WR_SEND,
+                                   .send_flags = IBV_SEND_SIGNALED,
+                                   .sg_list = &sge,
+                                   .num_sge = 1,
+                                };
+
+    if (head->version < RDMA_CONTROL_VERSION_MIN ||
+            head->version > RDMA_CONTROL_VERSION_MAX) {
+        fprintf(stderr, "SEND: Invalid control message version: %d,"
+                        " min: %d, max: %d\n",
+                        head->version, RDMA_CONTROL_VERSION_MIN,
+                        RDMA_CONTROL_VERSION_MAX);
+        return -1;
+    }
+
+    DPRINTF("CONTROL: sending %s..\n", control_desc[head->type]);
+
+    /*
+     * We don't actually need to do a memcpy() in here if we used
+     * the "sge" properly, but since we're only sending control messages
+     * (not RAM in a performance-critical path), then its OK for now.
+     *
+     * The copy makes the RDMAControlHeader simpler to manipulate
+     * for the time being.
+     */
+    memcpy(wr->control, head, RDMAControlHeaderSize);
+    control_to_network((void *) wr->control);
+
+    if (buf) {
+        memcpy(wr->control + RDMAControlHeaderSize, buf, head->len);
+    }
+
+
+    if (ibv_post_send(rdma->qp, &send_wr, &bad_wr)) {
+        return -1;
+    }
+
+    if (ret < 0) {
+        fprintf(stderr, "Failed to use post IB SEND for control!\n");
+        return ret;
+    }
+
+    ret = wait_for_wrid(rdma, RDMA_WRID_SEND_CONTROL);
+    if (ret < 0) {
+        fprintf(stderr, "rdma migration: polling control error!");
+    }
+
+    return ret;
+}
+
+/*
+ * Post a RECV work request in anticipation of some future receipt
+ * of data on the control channel.
+ */
+static int qemu_rdma_post_recv_control(RDMAContext *rdma, int idx)
+{
+    struct ibv_recv_wr *bad_wr;
+    struct ibv_sge sge = {
+                            .addr = (uint64_t)(rdma->wr_data[idx].control),
+                            .length = RDMA_CONTROL_MAX_BUFFER,
+                            .lkey = rdma->wr_data[idx].control_mr->lkey,
+                         };
+
+    struct ibv_recv_wr recv_wr = {
+                                    .wr_id = RDMA_WRID_RECV_CONTROL + idx,
+                                    .sg_list = &sge,
+                                    .num_sge = 1,
+                                 };
+
+
+    if (ibv_post_recv(rdma->qp, &recv_wr, &bad_wr)) {
+        return -1;
+    }
+
+    return 0;
+}
+
+/*
+ * Block and wait for a RECV control channel message to arrive.
+ */
+static int qemu_rdma_exchange_get_response(RDMAContext *rdma,
+                RDMAControlHeader *head, int expecting, int idx)
+{
+    int ret = wait_for_wrid(rdma, RDMA_WRID_RECV_CONTROL + idx);
+
+    if (ret < 0) {
+        fprintf(stderr, "rdma migration: polling control error!\n");
+        return ret;
+    }
+
+    network_to_control((void *) rdma->wr_data[idx].control);
+    memcpy(head, rdma->wr_data[idx].control, RDMAControlHeaderSize);
+
+    if (head->version < RDMA_CONTROL_VERSION_MIN ||
+            head->version > RDMA_CONTROL_VERSION_MAX) {
+        fprintf(stderr, "RECV: Invalid control message version: %d,"
+                        " min: %d, max: %d\n",
+                        head->version, RDMA_CONTROL_VERSION_MIN,
+                        RDMA_CONTROL_VERSION_MAX);
+        return -1;
+    }
+
+    DPRINTF("CONTROL: %s received\n", control_desc[expecting]);
+
+    if (expecting != RDMA_CONTROL_NONE && head->type != expecting) {
+        fprintf(stderr, "Was expecting a %s (%d) control message"
+                ", but got: %s (%d), length: %d\n",
+                control_desc[expecting], expecting,
+                control_desc[head->type], head->type, head->len);
+        return -EIO;
+    }
+
+    return 0;
+}
+
+/*
+ * When a RECV work request has completed, the work request's
+ * buffer is pointed at the header.
+ *
+ * This will advance the pointer to the data portion
+ * of the control message of the work request's buffer that
+ * was populated after the work request finished.
+ */
+static void qemu_rdma_move_header(RDMAContext *rdma, int idx,
+                                  RDMAControlHeader *head)
+{
+    rdma->wr_data[idx].control_len = head->len;
+    rdma->wr_data[idx].control_curr =
+        rdma->wr_data[idx].control + RDMAControlHeaderSize;
+}
+
+/*
+ * This is an 'atomic' high-level operation to deliver a single, unified
+ * control-channel message.
+ *
+ * Additionally, if the user is expecting some kind of reply to this message,
+ * they can request a 'resp' response message be filled in by posting an
+ * additional work request on behalf of the user and waiting for an additional
+ * completion.
+ *
+ * The extra (optional) response is used during registration to us from having
+ * to perform an *additional* exchange of message just to provide a response by
+ * instead piggy-backing on the acknowledgement.
+ */
+static int qemu_rdma_exchange_send(RDMAContext *rdma, RDMAControlHeader *head,
+                                   uint8_t *data, RDMAControlHeader *resp,
+                                   int *resp_idx)
+{
+    int ret = 0;
+    int idx = 0;
+
+    /*
+     * Wait until the server is ready before attempting to deliver the message
+     * by waiting for a READY message.
+     */
+    if (rdma->control_ready_expected) {
+        RDMAControlHeader resp;
+        ret = qemu_rdma_exchange_get_response(rdma,
+                                    &resp, RDMA_CONTROL_READY, idx);
+        if (ret < 0) {
+            return ret;
+        }
+    }
+
+    /*
+     * If the user is expecting a response, post a WR in anticipation of it.
+     */
+    if (resp) {
+        ret = qemu_rdma_post_recv_control(rdma, idx + 1);
+        if (ret) {
+            fprintf(stderr, "rdma migration: error posting"
+                    " extra control recv for anticipated result!");
+            return ret;
+        }
+    }
+
+    /*
+     * Post a WR to replace the one we just consumed for the READY message.
+     */
+    ret = qemu_rdma_post_recv_control(rdma, idx);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error posting first control recv!");
+        return ret;
+    }
+
+    /*
+     * Deliver the control message that was requested.
+     */
+    ret = qemu_rdma_post_send_control(rdma, data, head);
+
+    if (ret < 0) {
+        fprintf(stderr, "Failed to send control buffer!\n");
+        return ret;
+    }
+
+    /*
+     * If we're expecting a response, block and wait for it.
+     */
+    if (resp) {
+        DPRINTF("Waiting for response %s\n", control_desc[resp->type]);
+        ret = qemu_rdma_exchange_get_response(rdma, resp, resp->type, idx + 1);
+
+        if (ret < 0) {
+            return ret;
+        }
+
+        qemu_rdma_move_header(rdma, idx + 1, resp);
+        *resp_idx = idx + 1;
+        DPRINTF("Response %s received.\n", control_desc[resp->type]);
+    }
+
+    rdma->control_ready_expected = 1;
+
+    return 0;
+}
+
+/*
+ * This is an 'atomic' high-level operation to receive a single, unified
+ * control-channel message.
+ */
+static int qemu_rdma_exchange_recv(RDMAContext *rdma, RDMAControlHeader *head,
+                                int expecting)
+{
+    RDMAControlHeader ready = {
+                                .len = 0,
+                                .type = RDMA_CONTROL_READY,
+                                .version = RDMA_CONTROL_CURRENT_VERSION,
+                                .repeat = 1,
+                              };
+    int ret;
+    int idx = 0;
+
+    /*
+     * Inform the client that we're ready to receive a message.
+     */
+    ret = qemu_rdma_post_send_control(rdma, NULL, &ready);
+
+    if (ret < 0) {
+        fprintf(stderr, "Failed to send control buffer!\n");
+        return ret;
+    }
+
+    /*
+     * Block and wait for the message.
+     */
+    ret = qemu_rdma_exchange_get_response(rdma, head, expecting, idx);
+
+    if (ret < 0) {
+        return ret;
+    }
+
+    qemu_rdma_move_header(rdma, idx, head);
+
+    /*
+     * Post a new RECV work request to replace the one we just consumed.
+     */
+    ret = qemu_rdma_post_recv_control(rdma, idx);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error posting second control recv!");
+        return ret;
+    }
+
+    return 0;
+}
+
+/*
+ * Write an actual chunk of memory using RDMA.
+ *
+ * If we're using dynamic registration on the server-side, we have to
+ * send a registration command first.
+ */
+static int __qemu_rdma_write(QEMUFile *f, RDMAContext *rdma,
+        int current_index,
+        uint64_t offset, uint64_t length,
+        uint64_t wr_id, enum ibv_send_flags flag)
+{
+    struct ibv_sge sge;
+    struct ibv_send_wr send_wr = { 0 };
+    struct ibv_send_wr *bad_wr;
+    RDMALocalBlock *block = &(local_ram_blocks.block[current_index]);
+    int chunk;
+    RDMARegister reg;
+    RDMARegisterResult *reg_result;
+    int reg_result_idx;
+    RDMAControlHeader resp = { .type = RDMA_CONTROL_REGISTER_RESULT };
+    RDMAControlHeader head = { .len = sizeof(RDMARegister),
+                               .type = RDMA_CONTROL_REGISTER_REQUEST,
+                               .version = RDMA_CONTROL_CURRENT_VERSION,
+                               .repeat = 1,
+                             };
+    int ret;
+
+    sge.addr = (uint64_t)(block->local_host_addr + (offset - block->offset));
+    sge.length = length;
+    if (qemu_rdma_register_and_get_keys(rdma, block, sge.addr,
+                                        &sge.lkey, NULL)) {
+        fprintf(stderr, "cannot get lkey!\n");
+        return -EINVAL;
+    }
+
+    send_wr.wr_id = wr_id;
+    send_wr.opcode = IBV_WR_RDMA_WRITE;
+    send_wr.send_flags = flag;
+    send_wr.sg_list = &sge;
+    send_wr.num_sge = 1;
+    send_wr.wr.rdma.remote_addr = block->remote_host_addr +
+        (offset - block->offset);
+
+    if (rdma->chunk_register_destination) {
+        chunk = RDMA_REG_CHUNK_INDEX(block->local_host_addr, sge.addr);
+        if (!block->remote_keys[chunk]) {
+            /*
+             * Tell other side to register.
+             */
+            reg.len = sge.length;
+            reg.current_index = current_index;
+            reg.offset = offset;
+
+            DPRINTF("Sending registration request chunk %d for %d "
+                    "bytes, index: %d, offset: %" PRId64 "...\n",
+                    chunk, sge.length, current_index, offset);
+            ret = qemu_rdma_exchange_send(rdma, &head, (uint8_t *) &reg,
+                                    &resp, &reg_result_idx);
+            if (ret < 0) {
+                return ret;
+            }
+
+            reg_result = (RDMARegisterResult *)
+                    rdma->wr_data[reg_result_idx].control_curr;
+
+            DPRINTF("Received registration result:"
+                    " my key: %x their key %x, chunk %d\n",
+                    block->remote_keys[chunk], reg_result->rkey, chunk);
+
+            block->remote_keys[chunk] = reg_result->rkey;
+        }
+
+        send_wr.wr.rdma.rkey = block->remote_keys[chunk];
+    } else {
+        send_wr.wr.rdma.rkey = block->remote_rkey;
+    }
+
+    return ibv_post_send(rdma->qp, &send_wr, &bad_wr);
+}
+
+/*
+ * Push out any unwritten RDMA operations.
+ *
+ * We support sending out multiple chunks at the same time.
+ * Not all of them need to get signaled in the completion queue.
+ */
+static int qemu_rdma_write_flush(QEMUFile *f, RDMAContext *rdma)
+{
+    int ret;
+    enum ibv_send_flags flags = 0;
+
+    if (!rdma->current_length) {
+        return 0;
+    }
+    if (rdma->num_unsignaled_send >=
+            RDMA_UNSIGNALED_SEND_MAX) {
+        flags = IBV_SEND_SIGNALED;
+    }
+
+    while (1) {
+        ret = __qemu_rdma_write(f, rdma,
+                rdma->current_index,
+                rdma->current_offset,
+                rdma->current_length,
+                RDMA_WRID_RDMA_WRITE, flags);
+        if (ret) {
+            if (ret == ENOMEM) {
+                DPRINTF("send queue is full. wait a little....\n");
+                ret = wait_for_wrid(rdma, RDMA_WRID_RDMA_WRITE);
+                if (ret < 0) {
+                    fprintf(stderr, "rdma migration: failed to make "
+                                    "room in full send queue! %d\n", ret);
+                    return -EIO;
+                }
+            } else {
+                 fprintf(stderr, "rdma migration: write flush error! %d\n",
+                                                                ret);
+                 perror("write flush error");
+                 return -EIO;
+            }
+        } else {
+                break;
+        }
+    }
+
+    if (rdma->num_unsignaled_send >=
+            RDMA_UNSIGNALED_SEND_MAX) {
+        rdma->num_unsignaled_send = 0;
+        rdma->num_signaled_send++;
+        DPRINTF("signaled total: %d\n", rdma->num_signaled_send);
+    } else {
+        rdma->num_unsignaled_send++;
+    }
+
+    rdma->current_length = 0;
+    rdma->current_offset = 0;
+
+    return 0;
+}
+
+static inline int qemu_rdma_in_current_block(RDMAContext *rdma,
+                uint64_t offset, uint64_t len)
+{
+    RDMALocalBlock *block =
+        &(local_ram_blocks.block[rdma->current_index]);
+    if (rdma->current_index < 0) {
+        return 0;
+    }
+    if (offset < block->offset) {
+        return 0;
+    }
+    if (offset + len > block->offset + block->length) {
+        return 0;
+    }
+    return 1;
+}
+
+static inline int qemu_rdma_in_current_chunk(RDMAContext *rdma,
+                uint64_t offset, uint64_t len)
+{
+    RDMALocalBlock *block = &(local_ram_blocks.block[rdma->current_index]);
+    uint8_t *chunk_start, *chunk_end, *host_addr;
+    if (rdma->current_chunk < 0) {
+        return 0;
+    }
+    host_addr = block->local_host_addr + (offset - block->offset);
+    chunk_start = RDMA_REG_CHUNK_START(block, rdma->current_chunk);
+    if (chunk_start < block->local_host_addr) {
+        chunk_start = block->local_host_addr;
+    }
+    if (host_addr < chunk_start) {
+        return 0;
+    }
+    chunk_end = RDMA_REG_CHUNK_END(block, rdma->current_chunk);
+    if (chunk_end > chunk_start + block->length) {
+        chunk_end = chunk_start + block->length;
+    }
+    if (host_addr + len > chunk_end) {
+        return 0;
+    }
+    return 1;
+}
+
+static inline int qemu_rdma_buffer_mergable(RDMAContext *rdma,
+                    uint64_t offset, uint64_t len)
+{
+    if (rdma->current_length == 0) {
+        return 0;
+    }
+    if (offset != rdma->current_offset + rdma->current_length) {
+        return 0;
+    }
+    if (!qemu_rdma_in_current_block(rdma, offset, len)) {
+        return 0;
+    }
+#ifdef RDMA_CHUNK_REGISTRATION
+    if (!qemu_rdma_in_current_chunk(rdma, offset, len)) {
+        return 0;
+    }
+#endif
+    return 1;
+}
+
+/*
+ * We're not actually writing here, but doing three things:
+ *
+ * 1. Identify the chunk the buffer belongs to.
+ * 2. If the chunk is full or the buffer doesn't belong to the current
+ *    chunk, then start a new chunk and flush() the old chunk.
+ * 3. To keep the hardware busy, we also group chunks into batches
+ *    and only require that a batch gets acknowledged in the completion
+ *    qeueue instead of each individual chunk.
+ */
+static int qemu_rdma_write(QEMUFile *f, RDMAContext *rdma,
+                           uint64_t offset, uint64_t len)
+{
+    int index = rdma->current_index;
+    int chunk_index = rdma->current_chunk;
+    int ret;
+
+    /* If we cannot merge it, we flush the current buffer first. */
+    if (!qemu_rdma_buffer_mergable(rdma, offset, len)) {
+        ret = qemu_rdma_write_flush(f, rdma);
+        if (ret) {
+            return ret;
+        }
+        rdma->current_length = 0;
+        rdma->current_offset = offset;
+
+        ret = qemu_rdma_search_ram_block(offset, len,
+                    &local_ram_blocks, &index, &chunk_index);
+        if (ret) {
+            fprintf(stderr, "ram block search failed\n");
+            return ret;
+        }
+        rdma->current_index = index;
+        rdma->current_chunk = chunk_index;
+    }
+
+    /* merge it */
+    rdma->current_length += len;
+
+    /* flush it if buffer is too large */
+    if (rdma->current_length >= RDMA_MERGE_MAX) {
+        return qemu_rdma_write_flush(f, rdma);
+    }
+
+    return 0;
+}
+
+static void qemu_rdma_cleanup(RDMAContext *rdma)
+{
+    struct rdma_cm_event *cm_event;
+    int ret, idx;
+
+    if (rdma->cm_id) {
+        DPRINTF("Disconnecting...\n");
+        ret = rdma_disconnect(rdma->cm_id);
+        if (!ret) {
+            ret = rdma_get_cm_event(rdma->channel, &cm_event);
+            if (!ret) {
+                rdma_ack_cm_event(cm_event);
+            }
+        }
+        DPRINTF("Disconnected.\n");
+    }
+
+    if (remote_ram_blocks.remote_area) {
+        g_free(remote_ram_blocks.remote_area);
+    }
+
+    for (idx = 0; idx < (RDMA_CONTROL_MAX_WR + 1); idx++) {
+        if (rdma->wr_data[idx].control_mr) {
+            qemu_rdma_dereg_control(rdma, idx);
+        }
+        rdma->wr_data[idx].control_mr = NULL;
+    }
+
+    qemu_rdma_dereg_ram_blocks(&local_ram_blocks);
+
+    if (local_ram_blocks.block) {
+        if (rdma->chunk_register_destination) {
+            for (idx = 0; idx < local_ram_blocks.num_blocks; idx++) {
+                RDMALocalBlock *block = &(local_ram_blocks.block[idx]);
+                if (block->remote_keys) {
+                    g_free(block->remote_keys);
+                }
+            }
+        }
+        g_free(local_ram_blocks.block);
+    }
+
+    if (rdma->qp) {
+        ibv_destroy_qp(rdma->qp);
+    }
+    if (rdma->cq) {
+        ibv_destroy_cq(rdma->cq);
+    }
+    if (rdma->comp_channel) {
+        ibv_destroy_comp_channel(rdma->comp_channel);
+    }
+    if (rdma->pd) {
+        ibv_dealloc_pd(rdma->pd);
+    }
+    if (rdma->listen_id) {
+        rdma_destroy_id(rdma->listen_id);
+    }
+    if (rdma->cm_id) {
+        rdma_destroy_id(rdma->cm_id);
+        rdma->cm_id = 0;
+    }
+    if (rdma->channel) {
+        rdma_destroy_event_channel(rdma->channel);
+    }
+}
+
+static void qemu_rdma_remote_ram_blocks_init(void)
+{
+    int remote_size = (sizeof(RDMARemoteBlock) *
+                        local_ram_blocks.num_blocks)
+                        +   sizeof(*remote_ram_blocks.num_blocks);
+
+    DPRINTF("Preparing %d bytes for remote info\n", remote_size);
+
+    remote_ram_blocks.remote_area = g_malloc0(remote_size);
+    remote_ram_blocks.remote_size = remote_size;
+    remote_ram_blocks.num_blocks = remote_ram_blocks.remote_area;
+    remote_ram_blocks.block = (void *) (remote_ram_blocks.num_blocks + 1);
+}
+
+static int qemu_rdma_client_init(RDMAContext *rdma, Error **errp,
+                                 bool chunk_register_destination)
+{
+    int ret, idx;
+
+    if (rdma->client_init_done) {
+        return 0;
+    }
+
+    rdma->chunk_register_destination = chunk_register_destination;
+
+    ret = qemu_rdma_resolve_host(rdma);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error resolving host!");
+        goto err_rdma_client_init;
+    }
+
+    ret = qemu_rdma_alloc_pd_cq(rdma);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error allocating pd and cq!");
+        goto err_rdma_client_init;
+    }
+
+    ret = qemu_rdma_alloc_qp(rdma);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error allocating qp!");
+        goto err_rdma_client_init;
+    }
+
+    ret = qemu_rdma_init_ram_blocks(&local_ram_blocks);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error initializing ram blocks!");
+        goto err_rdma_client_init;
+    }
+
+    ret = qemu_rdma_client_reg_ram_blocks(rdma, &local_ram_blocks);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error client registering ram blocks!");
+        goto err_rdma_client_init;
+    }
+
+    for (idx = 0; idx < (RDMA_CONTROL_MAX_WR + 1); idx++) {
+        ret = qemu_rdma_reg_control(rdma, idx);
+        if (ret) {
+            fprintf(stderr, "rdma migration: error registering %d control!",
+                                                            idx);
+            goto err_rdma_client_init;
+        }
+    }
+
+    qemu_rdma_remote_ram_blocks_init();
+
+    rdma->client_init_done = 1;
+    return 0;
+
+err_rdma_client_init:
+    qemu_rdma_cleanup(rdma);
+    return -1;
+}
+
+static void caps_to_network(RDMACapabilities *cap)
+{
+    cap->version = htonl(cap->version);
+    cap->flags = htonl(cap->flags);
+}
+
+static void network_to_caps(RDMACapabilities *cap)
+{
+    cap->version = ntohl(cap->version);
+    cap->flags = ntohl(cap->flags);
+}
+
+static int qemu_rdma_connect(RDMAContext *rdma, Error **errp)
+{
+    RDMAControlHeader head;
+    RDMACapabilities cap = {
+                                .version = RDMA_CONTROL_CURRENT_VERSION,
+                                .flags = 0,
+                           };
+    struct rdma_conn_param conn_param = { .initiator_depth = 2,
+                                          .retry_count = 5,
+                                          .private_data = &cap,
+                                          .private_data_len = sizeof(cap),
+                                        };
+    struct rdma_cm_event *cm_event;
+    int ret;
+    int idx = 0;
+    int x;
+
+    if (rdma->chunk_register_destination) {
+        printf("Server dynamic registration requested.\n");
+        cap.flags |= RDMA_CAPABILITY_CHUNK_REGISTER;
+    }
+
+    caps_to_network(&cap);
+
+    ret = rdma_connect(rdma->cm_id, &conn_param);
+    if (ret) {
+        perror("rdma_connect");
+        fprintf(stderr, "rdma migration: error connecting!");
+        rdma_destroy_id(rdma->cm_id);
+        rdma->cm_id = 0;
+        goto err_rdma_client_connect;
+    }
+
+    ret = rdma_get_cm_event(rdma->channel, &cm_event);
+    if (ret) {
+        perror("rdma_get_cm_event after rdma_connect");
+        fprintf(stderr, "rdma migration: error connecting!");
+        rdma_ack_cm_event(cm_event);
+        rdma_destroy_id(rdma->cm_id);
+        rdma->cm_id = 0;
+        goto err_rdma_client_connect;
+    }
+
+    if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) {
+        perror("rdma_get_cm_event != EVENT_ESTABLISHED after rdma_connect");
+        fprintf(stderr, "rdma migration: error connecting!");
+        rdma_ack_cm_event(cm_event);
+        rdma_destroy_id(rdma->cm_id);
+        rdma->cm_id = 0;
+        goto err_rdma_client_connect;
+    }
+
+    memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap));
+    network_to_caps(&cap);
+
+    /*
+     * Verify that the destination can support the capabilities we requested.
+     */
+    if (!(cap.flags & RDMA_CAPABILITY_CHUNK_REGISTER) &&
+        rdma->chunk_register_destination) {
+        printf("Server cannot support dynamic registration. Will disable\n");
+        rdma->chunk_register_destination = false;
+    }
+
+    printf("Chunk registration %s\n",
+        rdma->chunk_register_destination ? "enabled" : "disabled");
+
+    rdma_ack_cm_event(cm_event);
+
+    ret = qemu_rdma_post_recv_control(rdma, idx + 1);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error posting second control recv!");
+        goto err_rdma_client_connect;
+    }
+
+    ret = qemu_rdma_post_recv_control(rdma, idx);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error posting second control recv!");
+        goto err_rdma_client_connect;
+    }
+
+    ret = qemu_rdma_exchange_get_response(rdma,
+                                &head, RDMA_CONTROL_RAM_BLOCKS, idx + 1);
+
+    if (ret < 0) {
+        fprintf(stderr, "rdma migration: error sending remote info!");
+        goto err_rdma_client_connect;
+    }
+
+    qemu_rdma_move_header(rdma, idx + 1, &head);
+    memcpy(remote_ram_blocks.remote_area, rdma->wr_data[idx + 1].control_curr,
+                    remote_ram_blocks.remote_size);
+
+    ret = qemu_rdma_process_remote_ram_blocks(
+                            &local_ram_blocks, &remote_ram_blocks);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error processing"
+                        " remote ram blocks!\n");
+        goto err_rdma_client_connect;
+    }
+
+    if (rdma->chunk_register_destination) {
+        for (x = 0; x < local_ram_blocks.num_blocks; x++) {
+            RDMALocalBlock *block = &(local_ram_blocks.block[x]);
+            int num_chunks = RDMA_REG_NUM_CHUNKS(block);
+            /* allocate memory to store remote rkeys */
+            block->remote_keys = g_malloc0(num_chunks * sizeof(uint32_t));
+        }
+    }
+    rdma->control_ready_expected = 1;
+    rdma->num_signaled_send = 0;
+    return 0;
+
+err_rdma_client_connect:
+    qemu_rdma_cleanup(rdma);
+    return -1;
+}
+
+static int qemu_rdma_server_init(RDMAContext *rdma, Error **errp)
+{
+    int ret, idx;
+    struct sockaddr_in sin;
+    struct rdma_cm_id *listen_id;
+    char ip[40] = "unknown";
+
+    for (idx = 0; idx < RDMA_CONTROL_MAX_WR; idx++) {
+        rdma->wr_data[idx].control_len = 0;
+        rdma->wr_data[idx].control_curr = NULL;
+    }
+
+    if (rdma->host == NULL) {
+        fprintf(stderr, "Error: RDMA host is not set!");
+        return -1;
+    }
+    /* create CM channel */
+    rdma->channel = rdma_create_event_channel();
+    if (!rdma->channel) {
+        fprintf(stderr, "Error: could not create rdma event channel");
+        return -1;
+    }
+
+    /* create CM id */
+    ret = rdma_create_id(rdma->channel, &listen_id, NULL, RDMA_PS_TCP);
+    if (ret) {
+        fprintf(stderr, "Error: could not create cm_id!");
+        goto err_server_init_create_listen_id;
+    }
+
+    memset(&sin, 0, sizeof(sin));
+    sin.sin_family = AF_INET;
+    sin.sin_port = htons(rdma->port);
+
+    if (rdma->host && strcmp("", rdma->host)) {
+        struct hostent *server_addr;
+        server_addr = gethostbyname(rdma->host);
+        if (!server_addr) {
+            fprintf(stderr, "Error: migration could not gethostbyname!");
+            goto err_server_init_bind_addr;
+        }
+        memcpy(&sin.sin_addr.s_addr, server_addr->h_addr,
+                server_addr->h_length);
+        inet_ntop(AF_INET, server_addr->h_addr, ip, sizeof ip);
+    } else {
+        sin.sin_addr.s_addr = INADDR_ANY;
+    }
+
+    DPRINTF("%s => %s\n", rdma->host, ip);
+
+    ret = rdma_bind_addr(listen_id, (struct sockaddr *)&sin);
+    if (ret) {
+        fprintf(stderr, "Error: could not rdma_bind_addr!");
+        goto err_server_init_bind_addr;
+    }
+
+    rdma->listen_id = listen_id;
+    if (listen_id->verbs) {
+        rdma->verbs = listen_id->verbs;
+    }
+    qemu_rdma_dump_id("server_init", rdma->verbs);
+    qemu_rdma_dump_gid("server_init", listen_id);
+    return 0;
+
+err_server_init_bind_addr:
+    rdma_destroy_id(listen_id);
+err_server_init_create_listen_id:
+    rdma_destroy_event_channel(rdma->channel);
+    rdma->channel = NULL;
+    return -1;
+
+}
+
+static int qemu_rdma_server_prepare(RDMAContext *rdma, Error **errp)
+{
+    int ret;
+    int idx;
+
+    if (!rdma->verbs) {
+        fprintf(stderr, "rdma migration: no verbs context!");
+        return 0;
+    }
+
+    ret = qemu_rdma_alloc_pd_cq(rdma);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error allocating pd and cq!");
+        goto err_rdma_server_prepare;
+    }
+
+    ret = qemu_rdma_init_ram_blocks(&local_ram_blocks);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error initializing ram blocks!");
+        goto err_rdma_server_prepare;
+    }
+
+    qemu_rdma_remote_ram_blocks_init();
+
+    /* Extra one for the send buffer */
+    for (idx = 0; idx < (RDMA_CONTROL_MAX_WR + 1); idx++) {
+        ret = qemu_rdma_reg_control(rdma, idx);
+        if (ret) {
+            fprintf(stderr, "rdma migration: error registering %d control!",
+                        idx);
+            goto err_rdma_server_prepare;
+        }
+    }
+
+    ret = rdma_listen(rdma->listen_id, 5);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error listening on socket!");
+        goto err_rdma_server_prepare;
+    }
+
+    return 0;
+
+err_rdma_server_prepare:
+    qemu_rdma_cleanup(rdma);
+    return -1;
+}
+
+static void *qemu_rdma_data_init(const char *host_port, Error **errp)
+{
+    RDMAContext *rdma = NULL;
+    InetSocketAddress *addr;
+
+    if (host_port) {
+        rdma = g_malloc0(sizeof(RDMAContext));
+        memset(rdma, 0, sizeof(RDMAContext));
+        rdma->current_index = -1;
+        rdma->current_chunk = -1;
+
+        addr = inet_parse(host_port, errp);
+        if (addr != NULL) {
+            rdma->port = atoi(addr->port);
+            rdma->host = g_strdup(addr->host);
+            printf("rdma host: %s\n", rdma->host);
+            printf("rdma port: %d\n", rdma->port);
+        } else {
+            error_setg(errp, "bad RDMA migration address '%s'", host_port);
+            g_free(rdma);
+            return NULL;
+        }
+    }
+
+    return rdma;
+}
+
+/*
+ * QEMUFile interface to the control channel.
+ * SEND messages for control only.
+ * pc.ram is handled with regular RDMA messages.
+ */
+static int qemu_rdma_put_buffer(void *opaque, const uint8_t *buf,
+                                int64_t pos, int size)
+{
+    QEMUFileRDMA *r = opaque;
+    QEMUFile *f = r->file;
+    RDMAContext *rdma = r->rdma;
+    size_t remaining = size;
+    uint8_t * data = (void *) buf;
+    int ret;
+
+    /*
+     * Push out any writes that
+     * we're queued up for pc.ram.
+     */
+    if (qemu_rdma_write_flush(f, rdma) < 0) {
+        return -EIO;
+    }
+
+    while (remaining) {
+        RDMAControlHeader head;
+
+        r->len = MIN(remaining, RDMA_SEND_INCREMENT);
+        remaining -= r->len;
+
+        head.len = r->len;
+        head.type = RDMA_CONTROL_QEMU_FILE;
+        head.version = RDMA_CONTROL_CURRENT_VERSION;
+
+        ret = qemu_rdma_exchange_send(rdma, &head, data, NULL, NULL);
+
+        if (ret < 0) {
+            return ret;
+        }
+
+        data += r->len;
+    }
+
+    return size;
+}
+
+static size_t qemu_rdma_fill(RDMAContext *rdma, uint8_t *buf,
+                             int size, int idx)
+{
+    size_t len = 0;
+
+    if (rdma->wr_data[idx].control_len) {
+        DPRINTF("RDMA %" PRId64 " of %d bytes already in buffer\n",
+                    rdma->wr_data[idx].control_len, size);
+
+        len = MIN(size, rdma->wr_data[idx].control_len);
+        memcpy(buf, rdma->wr_data[idx].control_curr, len);
+        rdma->wr_data[idx].control_curr += len;
+        rdma->wr_data[idx].control_len -= len;
+    }
+
+    return len;
+}
+
+/*
+ * QEMUFile interface to the control channel.
+ * RDMA links don't use bytestreams, so we have to
+ * return bytes to QEMUFile opportunistically.
+ */
+static int qemu_rdma_get_buffer(void *opaque, uint8_t *buf,
+                                int64_t pos, int size)
+{
+    QEMUFileRDMA *r = opaque;
+    RDMAContext *rdma = r->rdma;
+    RDMAControlHeader head;
+    int ret = 0;
+
+    /*
+     * First, we hold on to the last SEND message we
+     * were given and dish out the bytes until we run
+     * out of bytes.
+     */
+    r->len = qemu_rdma_fill(r->rdma, buf, size, 0);
+    if (r->len) {
+        return r->len;
+    }
+
+    /*
+     * Once we run out, we block and wait for another
+     * SEND message to arrive.
+     */
+    ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_QEMU_FILE);
+
+    if (ret < 0) {
+        return ret;
+    }
+
+    /*
+     * SEND was received with new bytes, now try again.
+     */
+    return qemu_rdma_fill(r->rdma, buf, size, 0);
+}
+
+/*
+ * Block until all the outstanding chunks have been delivered by the hardware.
+ */
+static int qemu_rdma_drain_cq(QEMUFile *f, RDMAContext *rdma)
+{
+    int ret;
+
+    if (qemu_rdma_write_flush(f, rdma) < 0) {
+        return -EIO;
+    }
+
+    while (rdma->num_signaled_send) {
+        ret = wait_for_wrid(rdma, RDMA_WRID_RDMA_WRITE);
+        if (ret < 0) {
+            fprintf(stderr, "rdma migration: complete polling error!\n");
+            return -EIO;
+        }
+    }
+
+    return 0;
+}
+
+static int qemu_rdma_close(void *opaque)
+{
+    QEMUFileRDMA *r = opaque;
+    if (r->rdma) {
+        qemu_rdma_cleanup(r->rdma);
+        g_free(r->rdma);
+    }
+    g_free(r);
+    return 0;
+}
+
+static size_t qemu_rdma_save_page(QEMUFile *f, void *opaque,
+                           ram_addr_t block_offset, ram_addr_t offset,
+                           size_t size, uint8_t *va)
+{
+    ram_addr_t current_addr = block_offset + offset;
+    QEMUFileRDMA *rfile = opaque;
+    RDMAContext *rdma;
+    int ret;
+
+    if (rfile) {
+        rdma = rfile->rdma;
+    } else {
+        return -ENOTSUP;
+    }
+
+    qemu_ftell(f);
+
+    /*
+     * Don't pin zero pages on the destination. Just return.
+     */
+    if (rdma->chunk_register_destination &&
+            (buffer_find_nonzero_offset(va, size) == size)) {
+        return size;
+    }
+
+    /*
+     * Add this page to the current 'chunk'. If the chunk
+     * is full, or the page doen't belong to the current chunk,
+     * an actual RDMA write will occur and a new chunk will be formed.
+     */
+    ret = qemu_rdma_write(f, rdma, current_addr, size);
+    if (ret < 0) {
+        fprintf(stderr, "rdma migration: write error! %d\n", ret);
+        return ret;
+    }
+
+    /*
+     * Drain the Completion Queue if possible, but do not block,
+     * just poll.
+     *
+     * If nothing to poll, the end of the iteration will do this
+     * again to make sure we don't overflow the request queue.
+     */
+    while (1) {
+        int ret = qemu_rdma_poll(rdma);
+        if (ret == RDMA_WRID_NONE) {
+            break;
+        }
+        if (ret < 0) {
+            fprintf(stderr, "rdma migration: polling error! %d\n", ret);
+            return ret;
+        }
+    }
+
+    return size;
+}
+
+static int qemu_rdma_accept(RDMAContext *rdma)
+{
+    RDMAControlHeader head = { .len = remote_ram_blocks.remote_size,
+                               .type = RDMA_CONTROL_RAM_BLOCKS,
+                               .version = RDMA_CONTROL_CURRENT_VERSION,
+                               .repeat = 1,
+                             };
+    RDMACapabilities cap;
+    uint32_t requested_flags;
+    struct rdma_conn_param conn_param = {
+                                            .responder_resources = 2,
+                                            .private_data = &cap,
+                                            .private_data_len = sizeof(cap),
+                                         };
+    struct rdma_cm_event *cm_event;
+    struct ibv_context *verbs;
+    int ret;
+
+    ret = rdma_get_cm_event(rdma->channel, &cm_event);
+    if (ret) {
+        goto err_rdma_server_wait;
+    }
+
+    if (cm_event->event != RDMA_CM_EVENT_CONNECT_REQUEST) {
+        rdma_ack_cm_event(cm_event);
+        goto err_rdma_server_wait;
+    }
+
+    memcpy(&cap, cm_event->param.conn.private_data, sizeof(cap));
+
+    network_to_caps(&cap);
+
+    if (cap.version < RDMA_CONTROL_VERSION_MIN ||
+            cap.version > RDMA_CONTROL_VERSION_MAX) {
+            fprintf(stderr, "Unknown client RDMA version: %d, bailing...\n",
+                            cap.version);
+            rdma_ack_cm_event(cm_event);
+            goto err_rdma_server_wait;
+    }
+
+    if (cap.version == RDMA_CONTROL_VERSION_1) {
+        if (cap.flags & RDMA_CAPABILITY_CHUNK_REGISTER) {
+            rdma->chunk_register_destination = true;
+        } else if (cap.flags & RDMA_CAPABILITY_NEXT_FEATURE) {
+            /* handle new capability */
+        }
+    } else {
+        fprintf(stderr, "Unknown client RDMA version: %d, bailing...\n",
+                        cap.version);
+        rdma_ack_cm_event(cm_event);
+        goto err_rdma_server_wait;
+    }
+
+    rdma->cm_id = cm_event->id;
+    verbs = cm_event->id->verbs;
+
+    rdma_ack_cm_event(cm_event);
+
+    /*
+     * Respond to client with the capabilities we agreed to support.
+     */
+    requested_flags = cap.flags;
+    cap.flags = 0;
+
+    if (rdma->chunk_register_destination &&
+        (requested_flags & RDMA_CAPABILITY_CHUNK_REGISTER)) {
+        cap.flags |= RDMA_CAPABILITY_CHUNK_REGISTER;
+    }
+
+    printf("Chunk registration %s\n",
+        rdma->chunk_register_destination ? "enabled" : "disabled");
+
+    caps_to_network(&cap);
+
+    DPRINTF("verbs context after listen: %p\n", verbs);
+
+    if (!rdma->verbs) {
+        rdma->verbs = verbs;
+        ret = qemu_rdma_server_prepare(rdma, NULL);
+        if (ret) {
+            fprintf(stderr, "rdma migration: error preparing server!\n");
+            goto err_rdma_server_wait;
+        }
+    } else if (rdma->verbs != verbs) {
+            fprintf(stderr, "ibv context not matching %p, %p!\n",
+                    rdma->verbs, verbs);
+            goto err_rdma_server_wait;
+    }
+
+    /* xxx destroy listen_id ??? */
+
+    qemu_set_fd_handler2(rdma->channel->fd, NULL, NULL, NULL, NULL);
+
+    ret = qemu_rdma_alloc_qp(rdma);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error allocating qp!");
+        goto err_rdma_server_wait;
+    }
+
+    ret = rdma_accept(rdma->cm_id, &conn_param);
+    if (ret) {
+        fprintf(stderr, "rdma_accept returns %d!\n", ret);
+        goto err_rdma_server_wait;
+    }
+
+    ret = rdma_get_cm_event(rdma->channel, &cm_event);
+    if (ret) {
+        fprintf(stderr, "rdma_accept get_cm_event failed %d!\n", ret);
+        goto err_rdma_server_wait;
+    }
+
+    if (cm_event->event != RDMA_CM_EVENT_ESTABLISHED) {
+        fprintf(stderr, "rdma_accept not event established!\n");
+        rdma_ack_cm_event(cm_event);
+        goto err_rdma_server_wait;
+    }
+
+    rdma_ack_cm_event(cm_event);
+
+    ret = qemu_rdma_post_recv_control(rdma, 0);
+    if (ret) {
+        fprintf(stderr, "rdma migration: error posting second control recv!");
+        goto err_rdma_server_wait;
+    }
+
+    if (rdma->chunk_register_destination == false) {
+        ret = qemu_rdma_server_reg_ram_blocks(rdma, &local_ram_blocks);
+        if (ret) {
+            fprintf(stderr, "rdma migration: error server "
+                            "registering ram blocks!");
+            goto err_rdma_server_wait;
+        }
+    }
+
+    qemu_rdma_copy_to_remote_ram_blocks(rdma,
+            &local_ram_blocks, &remote_ram_blocks);
+
+    ret = qemu_rdma_post_send_control(rdma,
+            (uint8_t *) remote_ram_blocks.remote_area, &head);
+
+    if (ret < 0) {
+        fprintf(stderr, "rdma migration: error sending remote info!");
+        goto err_rdma_server_wait;
+    }
+
+    qemu_rdma_dump_gid("server_connect", rdma->cm_id);
+
+    return 0;
+
+err_rdma_server_wait:
+    qemu_rdma_cleanup(rdma);
+    return ret;
+}
+
+/*
+ * During each iteration of the migration, we listen for instructions
+ * by the primary VM to perform dynamic page registrations before they
+ * can perform RDMA operations.
+ *
+ * We respond with the 'rkey'.
+ *
+ * Keep doing this until the primary tells us to stop.
+ */
+static int qemu_rdma_registration_handle(QEMUFile *f, void *opaque,
+                                         uint32_t flags)
+{
+    RDMAControlHeader resp = { .len = sizeof(RDMARegisterResult),
+                               .type = RDMA_CONTROL_REGISTER_RESULT,
+                               .version = RDMA_CONTROL_CURRENT_VERSION,
+                               .repeat = 0,
+                             };
+    QEMUFileRDMA *rfile = opaque;
+    RDMAContext *rdma = rfile->rdma;
+    RDMAControlHeader head;
+    RDMARegister *reg, *registers;
+    RDMARegisterResult *reg_result;
+    static RDMARegisterResult results[RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE];
+    RDMALocalBlock *block;
+    uint64_t host_addr;
+    int ret = 0;
+    int idx = 0;
+    int count = 0;
+
+    DPRINTF("Waiting for next registration %d...\n", flags);
+
+    do {
+        ret = qemu_rdma_exchange_recv(rdma, &head, RDMA_CONTROL_NONE);
+
+        if (ret < 0) {
+            break;
+        }
+
+        switch (head.type) {
+        case RDMA_CONTROL_REGISTER_FINISHED:
+                DPRINTF("Current registrations complete.\n");
+                goto out;
+        case RDMA_CONTROL_REGISTER_REQUEST:
+                if (head.repeat > RDMA_CONTROL_MAX_COMMANDS_PER_MESSAGE) {
+                    printf("Too many registration requests (%d). Bailing.\n",
+                        head.repeat);
+                    ret = -EIO;
+                    goto out;
+                }
+
+                DPRINTF("There are %d registration requests\n", head.repeat);
+
+                resp.repeat = head.repeat;
+                registers = (RDMARegister *) rdma->wr_data[idx].control_curr;
+
+                for (count = 0; count < head.repeat; count++) {
+                    reg = &registers[count];
+                    reg_result = &results[count];
+
+                    DPRINTF("Registration request (%d): %d"
+                        " bytes, index %d, offset %" PRId64 "\n",
+                        count, reg->len, reg->current_index, reg->offset);
+
+                    block = &(local_ram_blocks.block[reg->current_index]);
+                    host_addr = (uint64_t)(block->local_host_addr +
+                                (reg->offset - block->offset));
+                    if (qemu_rdma_register_and_get_keys(rdma, block,
+                                host_addr, NULL, &reg_result->rkey)) {
+                        fprintf(stderr, "cannot get rkey!\n");
+                        ret = -EINVAL;
+                        goto out;
+                    }
+
+                    DPRINTF("Registered rkey for this request: %x\n",
+                                    reg_result->rkey);
+                }
+
+                ret = qemu_rdma_post_send_control(rdma,
+                                (uint8_t *) results, &resp);
+
+                if (ret < 0) {
+                    fprintf(stderr, "Failed to send control buffer!\n");
+                    goto out;
+                }
+                break;
+        case RDMA_CONTROL_REGISTER_RESULT:
+                fprintf(stderr, "Invalid RESULT message at server.\n");
+                ret = -EIO;
+                goto out;
+        default:
+                fprintf(stderr, "Unknown control message %s\n",
+                                    control_desc[head.type]);
+                ret = -EIO;
+                goto out;
+        }
+    } while (1);
+
+out:
+    return ret;
+}
+
+static int qemu_rdma_registration_start(QEMUFile *f, void *opaque,
+                                        uint32_t flags)
+{
+    DPRINTF("start section: %d\n", flags);
+    qemu_put_be64(f, RAM_SAVE_FLAG_HOOK);
+    return 0;
+}
+
+/*
+ * Inform server that dynamic registrations are done for now.
+ * First, flush writes, if any.
+ */
+static int qemu_rdma_registration_stop(QEMUFile *f, void *opaque,
+                                       uint32_t flags)
+{
+    QEMUFileRDMA *rfile = opaque;
+    RDMAContext *rdma = rfile->rdma;
+    RDMAControlHeader head = { .len = 0,
+                               .type = RDMA_CONTROL_REGISTER_FINISHED,
+                               .version = RDMA_CONTROL_CURRENT_VERSION,
+                               .repeat = 1,
+                             };
+    int ret = qemu_rdma_drain_cq(f, rdma);
+
+    if (ret >= 0) {
+        DPRINTF("Sending registration finish %d...\n", flags);
+
+        ret = qemu_rdma_exchange_send(rdma, &head, NULL, NULL, NULL);
+    }
+
+    return ret;
+}
+
+const QEMUFileOps rdma_read_ops = {
+    .get_buffer    = qemu_rdma_get_buffer,
+    .close         = qemu_rdma_close,
+    .get_fd        = qemu_rdma_get_fd,
+    .hook_ram_load = qemu_rdma_registration_handle,
+};
+
+const QEMUFileOps rdma_write_ops = {
+    .put_buffer           = qemu_rdma_put_buffer,
+    .close                = qemu_rdma_close,
+    .get_fd               = qemu_rdma_get_fd,
+    .before_ram_iterate   = qemu_rdma_registration_start,
+    .after_ram_iterate    = qemu_rdma_registration_stop,
+    .save_page            = qemu_rdma_save_page,
+};
+
+static void *qemu_fopen_rdma(RDMAContext *rdma, const char *mode)
+{
+    QEMUFileRDMA *r = g_malloc0(sizeof(QEMUFileRDMA));
+
+    if (qemu_file_mode_is_not_valid(mode)) {
+        return NULL;
+    }
+
+    r->rdma = rdma;
+
+    if (mode[0] == 'w') {
+        r->file = qemu_fopen_ops(r, &rdma_write_ops);
+    } else {
+        r->file = qemu_fopen_ops(r, &rdma_read_ops);
+    }
+
+    return r->file;
+}
+
+static void rdma_accept_incoming_migration(void *opaque)
+{
+    RDMAContext *rdma = opaque;
+    int ret;
+    QEMUFile *f;
+
+    DPRINTF("Accepting rdma connection...\n");
+    ret = qemu_rdma_accept(rdma);
+    if (ret) {
+        fprintf(stderr, "RDMA Migration initialization failed!\n");
+        goto err;
+    }
+
+    DPRINTF("Accepted migration\n");
+
+    f = qemu_fopen_rdma(rdma, "rb");
+    if (f == NULL) {
+        fprintf(stderr, "could not qemu_fopen_rdma!\n");
+        goto err;
+    }
+
+    process_incoming_migration(f);
+    return;
+
+err:
+    qemu_rdma_cleanup(rdma);
+}
+
+void rdma_start_incoming_migration(const char *host_port, Error **errp)
+{
+    int ret;
+    RDMAContext *rdma;
+
+    DPRINTF("Starting RDMA-based incoming migration\n");
+    rdma = qemu_rdma_data_init(host_port, errp);
+    if (rdma == NULL) {
+        return;
+    }
+
+    ret = qemu_rdma_server_init(rdma, NULL);
+
+    if (!ret) {
+        DPRINTF("qemu_rdma_server_init success\n");
+        ret = qemu_rdma_server_prepare(rdma, NULL);
+
+        if (!ret) {
+            DPRINTF("qemu_rdma_server_prepare success\n");
+
+            qemu_set_fd_handler2(rdma->channel->fd, NULL,
+                                 rdma_accept_incoming_migration, NULL,
+                                    (void *)(intptr_t) rdma);
+            return;
+        }
+    }
+
+    g_free(rdma);
+}
+
+void rdma_start_outgoing_migration(void *opaque,
+                            const char *host_port, Error **errp)
+{
+    MigrationState *s = opaque;
+    RDMAContext *rdma = NULL;
+    int ret;
+
+    rdma = qemu_rdma_data_init(host_port, errp);
+    if (rdma == NULL) {
+        goto err;
+    }
+
+    ret = qemu_rdma_client_init(rdma, NULL,
+        s->enabled_capabilities[MIGRATION_CAPABILITY_CHUNK_REGISTER_DESTINATION]);
+
+    if (!ret) {
+        DPRINTF("qemu_rdma_client_init success\n");
+        ret = qemu_rdma_connect(rdma, NULL);
+
+        if (!ret) {
+            DPRINTF("qemu_rdma_client_connect success\n");
+            s->file = qemu_fopen_rdma(rdma, "wb");
+            migrate_fd_connect(s);
+            return;
+        }
+    }
+err:
+    g_free(rdma);
+    migrate_fd_error(s);
+    error_setg(errp, "Error connecting using rdma! %d\n", ret);
+}
+