Patchwork [U-Boot,v2,1/3] iomux-v3: Place pad control definitions into common file

login
register
mail settings
Submitter Fabio Estevam
Date April 9, 2013, 6:55 p.m.
Message ID <1365533708-6306-1-git-send-email-fabio.estevam@freescale.com>
Download mbox | patch
Permalink /patch/235189/
State Superseded
Delegated to: Stefano Babic
Headers show

Comments

Fabio Estevam - April 9, 2013, 6:55 p.m.
Instead of having the same PAD control definition in each MX6 variant pin file,
place it into a common location.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
Changes since v2:
- Add missing IOMUX_CONFIG_SION definition
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h |   27 ---------------------------
 arch/arm/include/asm/arch-mx6/mx6q_pins.h  |   27 ---------------------------
 arch/arm/include/asm/imx-common/iomux-v3.h |   27 ++++++++++++++++++++++++++-
 3 files changed, 26 insertions(+), 55 deletions(-)

Patch

diff --git a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
index 9846f1b..0ed12f3 100644
--- a/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6dl_pins.h
@@ -22,33 +22,6 @@ 
 
 #include <asm/imx-common/iomux-v3.h>
 
-/* Use to set PAD control */
-#define PAD_CTL_HYS		(1 << 16)
-#define PAD_CTL_PUS_100K_DOWN	(0 << 14)
-#define PAD_CTL_PUS_47K_UP	(1 << 14)
-#define PAD_CTL_PUS_100K_UP	(2 << 14)
-#define PAD_CTL_PUS_22K_UP	(3 << 14)
-
-#define PAD_CTL_PUE		(1 << 13)
-#define PAD_CTL_PKE		(1 << 12)
-#define PAD_CTL_ODE		(1 << 11)
-#define PAD_CTL_SPEED_LOW	(1 << 6)
-#define PAD_CTL_SPEED_MED	(2 << 6)
-#define PAD_CTL_SPEED_HIGH	(3 << 6)
-#define PAD_CTL_DSE_DISABLE	(0 << 3)
-#define PAD_CTL_DSE_240ohm	(1 << 3)
-#define PAD_CTL_DSE_120ohm	(2 << 3)
-#define PAD_CTL_DSE_80ohm	(3 << 3)
-#define PAD_CTL_DSE_60ohm	(4 << 3)
-#define PAD_CTL_DSE_48ohm	(5 << 3)
-#define PAD_CTL_DSE_40ohm	(6 << 3)
-#define PAD_CTL_DSE_34ohm	(7 << 3)
-#define PAD_CTL_SRE_FAST	(1 << 0)
-#define PAD_CTL_SRE_SLOW	(0 << 0)
-
-#define IOMUX_CONFIG_SION 0x10
-#define NO_MUX_I                0
-#define NO_PAD_I                0
 enum {
 	MX6_PAD_CSI0_DAT10__UART1_TXD		= IOMUX_PAD(0x0360, 0x004C, 3, 0x0000, 0, 0),
 	MX6_PAD_CSI0_DAT11__UART1_RXD		= IOMUX_PAD(0x0364, 0x0050, 3, 0x08FC, 1, 0),
diff --git a/arch/arm/include/asm/arch-mx6/mx6q_pins.h b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
index 1c1c008..02a40d4 100644
--- a/arch/arm/include/asm/arch-mx6/mx6q_pins.h
+++ b/arch/arm/include/asm/arch-mx6/mx6q_pins.h
@@ -24,33 +24,6 @@ 
 
 #include <asm/imx-common/iomux-v3.h>
 
-/* Use to set PAD control */
-#define PAD_CTL_HYS		(1 << 16)
-#define PAD_CTL_PUS_100K_DOWN	(0 << 14)
-#define PAD_CTL_PUS_47K_UP	(1 << 14)
-#define PAD_CTL_PUS_100K_UP	(2 << 14)
-#define PAD_CTL_PUS_22K_UP	(3 << 14)
-
-#define PAD_CTL_PUE		(1 << 13)
-#define PAD_CTL_PKE		(1 << 12)
-#define PAD_CTL_ODE		(1 << 11)
-#define PAD_CTL_SPEED_LOW	(1 << 6)
-#define PAD_CTL_SPEED_MED	(2 << 6)
-#define PAD_CTL_SPEED_HIGH	(3 << 6)
-#define PAD_CTL_DSE_DISABLE	(0 << 3)
-#define PAD_CTL_DSE_240ohm	(1 << 3)
-#define PAD_CTL_DSE_120ohm	(2 << 3)
-#define PAD_CTL_DSE_80ohm	(3 << 3)
-#define PAD_CTL_DSE_60ohm	(4 << 3)
-#define PAD_CTL_DSE_48ohm	(5 << 3)
-#define PAD_CTL_DSE_40ohm	(6 << 3)
-#define PAD_CTL_DSE_34ohm	(7 << 3)
-#define PAD_CTL_SRE_FAST	(1 << 0)
-#define PAD_CTL_SRE_SLOW	(0 << 0)
-
-#define NO_MUX_I                0
-#define NO_PAD_I                0
-
 enum {
 	MX6_PAD_SD2_DAT1__USDHC2_DAT1		= IOMUX_PAD(0x0360, 0x004C, 0, 0x0000, 0, 0),
 	MX6_PAD_SD2_DAT1__ECSPI5_SS0		= IOMUX_PAD(0x0360, 0x004C, 1, 0x0834, 0, 0),
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index c34bb76..36917c8 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -95,7 +95,32 @@  typedef u64 iomux_v3_cfg_t;
 #define GPIO_PORTE		(4 << GPIO_PORT_SHIFT)
 #define GPIO_PORTF		(5 << GPIO_PORT_SHIFT)
 
-#define MUX_CONFIG_SION		(0x1 << 4)
+#define PAD_CTL_HYS		(1 << 16)
+#define PAD_CTL_PUS_100K_DOWN	(0 << 14)
+#define PAD_CTL_PUS_47K_UP	(1 << 14)
+#define PAD_CTL_PUS_100K_UP	(2 << 14)
+#define PAD_CTL_PUS_22K_UP	(3 << 14)
+
+#define PAD_CTL_PUE		(1 << 13)
+#define PAD_CTL_PKE		(1 << 12)
+#define PAD_CTL_ODE		(1 << 11)
+#define PAD_CTL_SPEED_LOW	(1 << 6)
+#define PAD_CTL_SPEED_MED	(2 << 6)
+#define PAD_CTL_SPEED_HIGH	(3 << 6)
+#define PAD_CTL_DSE_DISABLE	(0 << 3)
+#define PAD_CTL_DSE_240ohm	(1 << 3)
+#define PAD_CTL_DSE_120ohm	(2 << 3)
+#define PAD_CTL_DSE_80ohm	(3 << 3)
+#define PAD_CTL_DSE_60ohm	(4 << 3)
+#define PAD_CTL_DSE_48ohm	(5 << 3)
+#define PAD_CTL_DSE_40ohm	(6 << 3)
+#define PAD_CTL_DSE_34ohm	(7 << 3)
+#define PAD_CTL_SRE_FAST	(1 << 0)
+#define PAD_CTL_SRE_SLOW	(0 << 0)
+
+#define IOMUX_CONFIG_SION	0x10
+#define NO_MUX_I		0
+#define NO_PAD_I		0
 
 int imx_iomux_v3_setup_pad(iomux_v3_cfg_t pad);
 int imx_iomux_v3_setup_multiple_pads(iomux_v3_cfg_t const *pad_list,