| Message ID | 1365419819-7320-3-git-send-email-colin.king@canonical.com |
|---|---|
| State | Accepted |
| Headers | show |
On 04/08/2013 07:16 PM, Colin King wrote: > From: Colin Ian King <colin.king@canonical.com> > > fwts klog test has change the error level of some of the failures > so we need to update the test to keep in sync. > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > klog-0001/klog-0001.log | 580 +++++++++++++++++++++++++----------------------- > klog-0001/klog-0002.log | 26 +-- > 2 files changed, 318 insertions(+), 288 deletions(-) > > diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log > index 27fecfd..9f6ed98 100644 > --- a/klog-0001/klog-0001.log > +++ b/klog-0001/klog-0001.log > @@ -2548,15 +2548,14 @@ klog > klog ADVICE: A Method has returned a Package List that was > klog larger than expected. > klog > -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > -klog message: [ 0.074070] ACPI Error: The DSDT has been > +klog FAILED [HIGH] KlogAcpiDsdtCorruptOrReplaced: Test 1, HIGH > +klog Kernel message: [ 0.074070] ACPI Error: The DSDT has been > klog corrupted or replaced - old, new headers below (20110413 > klog /tbutils-372) > klog > -klog ADVICE: The kernel has most probably detected an error > -klog while executing ACPI AML. The error lists the ACPI driver > -klog module and the line number where the bug has been caught > -klog and the method that caused the error. > +klog ADVICE: Some firmware corrupts the DSDT or installs a bad > +klog new DSDT, so a workaround is to copy the DSDT. Booting > +klog with kernel parameter acpi=copy_dsdt may fix this issue. > klog > klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > klog message: [ 0.074090] ACPI Error: Please send DMI info to > @@ -2905,12 +2904,13 @@ klog normally indicates that there is a bug in the compiled AML > klog code. It could be a programming fault or an AML compiler > klog issue. See acpi_ps_parse_aml(). > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.093544] ACPI Error: Needed type [Reference], > -klog found [Device] f7019f90 (20100428/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.093544] ACPI Error: Needed type > +klog [Reference], found [Device] f7019f90 (20100428 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1, > klog MEDIUM Kernel message: [ 0.094477] ACPI Warning: Incorrect > @@ -3054,14 +3054,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.101941] ACPI Error: Field > -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) > -klog (20110112/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.101941] ACPI Error: Field [ASSM] at > +klog 524320 exceeds Buffer [BUF0] size 880 (bits) (20110112 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.101946] ACPI Error: Method parse/execution > @@ -3153,12 +3153,13 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.109618] ACPI Error: Needed type [Reference], > -klog found [Device] f7012f90 (20090903/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.109618] ACPI Error: Needed type > +klog [Reference], found [Device] f7012f90 (20090903 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.109635] ACPI Error (psparse-0537): Method > @@ -3287,14 +3288,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.136585] ACPI Error: Field > -klog [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) > -klog (20090903/dsopcode-596) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.136585] ACPI Error: Field [ALB2] at > +klog 120 exceeds Buffer [CRSA] size 104 (bits) (20090903 > +klog /dsopcode-596) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.136600] ACPI Error (psparse-0537): Method > @@ -3818,12 +3819,13 @@ klog ADVICE: It appears that PCI config space has been > klog configured for a specific device but does not appear to be > klog reserved by the ACPI motherboard resources. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.177377] ACPI Error: Needed type [Reference], > -klog found [Device] f701af90 (20100428/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.177377] ACPI Error: Needed type > +klog [Reference], found [Device] f701af90 (20100428 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.177377] ACPI Error (psparse-0537): Method > @@ -4300,12 +4302,13 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.189086] ACPI Error: Needed type [Reference], > -klog found [Device] f700ff90 (20090903/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.189086] ACPI Error: Needed type > +klog [Reference], found [Device] f700ff90 (20090903 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.189100] ACPI Error (psparse-0537): Method > @@ -4316,12 +4319,12 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.189451] ACPI Error: Needed type [Reference], > -klog found [Device] f700ef90 20090521 exresop-104 > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.189451] ACPI Error: Needed type > +klog [Reference], found [Device] f700ef90 20090521 exresop-104 > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.189466] ACPI Error (psparse-0537): Method > @@ -4998,14 +5001,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.222980] ACPI Error: Field > -klog [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) > -klog (20090903/dsopcode-596) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.222980] ACPI Error: Field [I9MN] at > +klog 544 exceeds Buffer [IORT] size 464 (bits) (20090903 > +klog /dsopcode-596) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.222987] ACPI Error (psparse-0537): Method > @@ -5073,14 +5076,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.224987] ACPI Error: Field > -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) > -klog (20100428/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.224987] ACPI Error: Field [ASSM] at > +klog 524320 exceeds Buffer [BUF0] size 688 (bits) (20100428 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.224994] ACPI Error (psparse-0537): Method > @@ -6105,12 +6108,13 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.321722] ACPI Error: Needed type [Reference], > -klog found [Device] ffff88007552b900 (20100428/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.321722] ACPI Error: Needed type > +klog [Reference], found [Device] ffff88007552b900 (20100428 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.321740] ACPI Error (psparse-0537): Method > @@ -6409,12 +6413,13 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.331637] ACPI Error: Needed type [Reference], > -klog found [Device] ffff88014b82d820 (20090903/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.331637] ACPI Error: Needed type > +klog [Reference], found [Device] ffff88014b82d820 (20090903 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.331653] ACPI Error (psparse-0537): Method > @@ -6425,12 +6430,13 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.331820] ACPI Error: Needed type [Reference], > -klog found [Device] ffff8800379aa900 (20100428/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.331820] ACPI Error: Needed type > +klog [Reference], found [Device] ffff8800379aa900 (20100428 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.331838] ACPI Error (psparse-0537): Method > @@ -7058,12 +7064,13 @@ klog while executing ACPI AML. The error lists the ACPI driver > klog module and the line number where the bug has been caught > klog and the method that caused the error. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.353652] ACPI Error: Needed type [Reference], > -klog found [Device] ffff8800379a6800 (20090903/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.353652] ACPI Error: Needed type > +klog [Reference], found [Device] ffff8800379a6800 (20090903 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.353652] ACPI Error (psparse-0537): Method > @@ -7083,15 +7090,15 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > -klog message: [ 0.355798] ACPI Error: ACPI path has too many > -klog parent prefixes (^) - reached beyond root node (20090903 > -klog /nsaccess-429) > +klog FAILED [HIGH] KlogAcpiPathTooManyParentPrefixes: Test 1, > +klog HIGH Kernel message: [ 0.355798] ACPI Error: ACPI path has > +klog too many parent prefixes (^) - reached beyond root node > +klog (20090903/nsaccess-429) > klog > -klog ADVICE: The kernel has most probably detected an error > -klog while executing ACPI AML. The error lists the ACPI driver > -klog module and the line number where the bug has been caught > -klog and the method that caused the error. > +klog ADVICE: An ACPI path has too many parent prefixes and has > +klog fallen outside the root node. This is a bug in the > +klog firmware. The Name Space lookup on the ACPI path cannot be > +klog found. > klog > klog FAILED [HIGH] KlogBiosTimerNotConnectedtoIoApic: Test 1, > klog HIGH Kernel message: [ 0.356001] ..MP-BIOS bug: 8254 timer > @@ -7212,15 +7219,15 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > -klog message: [ 0.361596] ACPI Error: ACPI path has too many > -klog parent prefixes (^) - reached beyond root node (20100428 > -klog /nsaccess-429) > +klog FAILED [HIGH] KlogAcpiPathTooManyParentPrefixes: Test 1, > +klog HIGH Kernel message: [ 0.361596] ACPI Error: ACPI path has > +klog too many parent prefixes (^) - reached beyond root node > +klog (20100428/nsaccess-429) > klog > -klog ADVICE: The kernel has most probably detected an error > -klog while executing ACPI AML. The error lists the ACPI driver > -klog module and the line number where the bug has been caught > -klog and the method that caused the error. > +klog ADVICE: An ACPI path has too many parent prefixes and has > +klog fallen outside the root node. This is a bug in the > +klog firmware. The Name Space lookup on the ACPI path cannot be > +klog found. > klog > klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel > klog message: [ 0.362481] ACPI Error (psparse-0537): Method > @@ -7711,14 +7718,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.399990] ACPI Error: Field > -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) > -klog (20110112/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.399990] ACPI Error: Field [ASSM] at > +klog 524320 exceeds Buffer [BUF0] size 688 (bits) (20110112 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.399996] ACPI Error: Method parse/execution > @@ -7858,14 +7865,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.420241] ACPI Error: Field > -klog [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) > -klog (20100428/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.420241] ACPI Error: Field [I9MN] at > +klog 544 exceeds Buffer [IORT] size 464 (bits) (20100428 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.420248] ACPI Error (psparse-0537): Method > @@ -8605,14 +8612,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.591722] ACPI Error: Field > -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) > -klog (20100428/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.591722] ACPI Error: Field [ASSM] at > +klog 524320 exceeds Buffer [BUF0] size 880 (bits) (20100428 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.591729] ACPI Error (psparse-0537): Method > @@ -9477,14 +9484,14 @@ klog ADVICE: The ACPI Method was executing with a different > klog number of parameters than the Method expected. This should > klog be fixed. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.744106] ACPI Error: Field > -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) > -klog (20090903/dsopcode-596) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.744106] ACPI Error: Field [ASSM] at > +klog 524320 exceeds Buffer [BUF0] size 880 (bits) (20090903 > +klog /dsopcode-596) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.744114] ACPI Error (psparse-0537): Method > @@ -10634,14 +10641,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH > +klog FAILED [HIGH] KlogAcpiKlogRegionNoHandler: Test 1, HIGH > klog Kernel message: [ 1.246164] ACPI Error: Region > klog EmbeddedControl (ID=3) has no handler (20110413 > klog /exfldio-292) > klog > -klog ADVICE: This is a bug picked up by the kernel, but as yet, > -klog the firmware test suite has no diagnostic advice for this > -klog particular problem. > +klog ADVICE: An access (read or write) to an operation region > +klog has been attempted and a region handler for this has not > +klog been implemented, this may need to be implemented to > +klog provide the expected behaviour. See > +klog acpi_ex_access_region(). > klog > klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH > klog Kernel message: [ 1.246169] ACPI Error: Method parse > @@ -10785,14 +10794,14 @@ klog some AML because a object or control did not exist. This > klog normally occurs because of buggy firmware and may lead to > klog unexpected behaviour or loss of functionality. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 1.371174] ACPI Error: Field > -klog [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) > -klog (20090903/dsopcode-596) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 1.371174] ACPI Error: Field [CDW3] at 96 > +klog exceeds Buffer [NULL] size 64 (bits) (20090903 > +klog /dsopcode-596) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1, > klog CRITICAL Kernel message: [ 1.371180] ACPI Error > @@ -10822,13 +10831,14 @@ klog ADVICE: The kernel has detected an error trying to execute > klog an Method and it cannot find an object. This is indicates > klog a bug in the DSDT or SSDT AML code. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 1.384655] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff8801393f91f8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 1.384655] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff8801393f91f8 > klog (20090903/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 1.384672] ACPI Error (psparse-0537): Method > @@ -11196,13 +11206,14 @@ klog some AML because a object or control did not exist. This > klog normally occurs because of buggy firmware and may lead to > klog unexpected behaviour or loss of functionality. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 1.678325] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88022f7bb5e8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 1.678325] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88022f7bb5e8 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 1.678342] ACPI Error: Method parse/execution > @@ -11213,13 +11224,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 1.678390] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88022f7bb8b8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 1.678390] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88022f7bb8b8 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 1.678412] ACPI Error: Method parse/execution > @@ -12177,14 +12189,13 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > -klog message: [ 2.334361] ACPI Error: Attempt to CreateField of > -klog length zero (20110112/dsopcode-529) > +klog FAILED [HIGH] KlogAcpiZeroLengthCreateField: Test 1, HIGH > +klog Kernel message: [ 2.334361] ACPI Error: Attempt to > +klog CreateField of length zero (20110112/dsopcode-529) > klog > -klog ADVICE: The kernel has most probably detected an error > -klog while executing ACPI AML. The error lists the ACPI driver > -klog module and the line number where the bug has been caught > -klog and the method that caused the error. > +klog ADVICE: Failed to initialise an ACPI buffer field, > +klog CreateField used with a zero field length which is > +klog illegal. This is a firmware bug. > klog > klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH > klog Kernel message: [ 2.334370] ACPI Error: Method parse > @@ -12517,14 +12528,14 @@ klog > klog ADVICE: The ACPI Method returned an incorrect type, this > klog should be fixed. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 2.949708] ACPI Error: Field > -klog [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) > -klog (20110112/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 2.949708] ACPI Error: Field [CDW3] at 96 > +klog exceeds Buffer [NULL] size 64 (bits) (20110112 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1, > klog CRITICAL Kernel message: [ 2.949716] ACPI Error: Method > @@ -13350,13 +13361,14 @@ klog > klog ADVICE: Could not set the brightness level, the ACPI > klog control _BCM failed to execute correctly. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 9.393479] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012d8cfee8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 9.393479] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012d8cfee8 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 9.393498] ACPI Error: Method parse/execution > @@ -13376,13 +13388,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 9.394098] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012d8cfd38 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 9.394098] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012d8cfd38 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 9.394109] ACPI Error: Method parse/execution > @@ -13447,13 +13460,14 @@ klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > klog been omitted. This can cause display switching issues. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 10.120967] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88023bcba438 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 10.120967] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88023bcba438 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 10.120977] ACPI Error: Method parse/execution > @@ -13464,13 +13478,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 10.121007] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88023bcba1b0 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 10.121007] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88023bcba1b0 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 10.121018] ACPI Error: Method parse/execution > @@ -13860,21 +13875,23 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 11.880473] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012125f558 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 11.880473] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012125f558 > klog (20110413/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 11.880998] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012125f3a8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 11.880998] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012125f3a8 > klog (20110413/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH > klog Kernel message: [ 11.915871] ACPI Error (psparse-0537): > @@ -13944,13 +13961,14 @@ klog ADVICE: The ACPI driver encountered an error executing > klog some ACPI AML code which originated from a device timing > klog out. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 12.167076] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff8800b1753048 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 12.167076] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff8800b1753048 > klog (20090903/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 12.167089] ACPI Error (psparse-0537): Method > @@ -13977,13 +13995,14 @@ klog > klog ADVICE: Executing the ACPI Method leaded in an execution > klog failure. This needs investigating. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 12.242368] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012ea6e6c0 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 12.242368] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012ea6e6c0 > klog (20110413/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 12.242387] ACPI Error: Method parse/execution > @@ -14010,13 +14029,14 @@ klog > klog ADVICE: Executing the ACPI Method leaded in an execution > klog failure. This needs investigating. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 12.242974] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012ea6e5e8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 12.242974] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012ea6e5e8 > klog (20110413/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 12.242986] ACPI Error: Method parse/execution > @@ -14127,14 +14147,14 @@ klog ADVICE: The ACPI driver encountered an error executing > klog some ACPI AML code which originated from a device timing > klog out. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 13.445954] ACPI Error: Field > -klog [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) > -klog (20110112/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 13.445954] ACPI Error: Field [D128] at > +klog 1040 exceeds Buffer [NULL] size 160 (bits) (20110112 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 13.445980] ACPI Error: Method parse/execution > @@ -14233,13 +14253,14 @@ klog > klog ADVICE: Executing the ACPI Method leaded in an execution > klog failure. This needs investigating. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 14.885219] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88013c6b58b8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 14.885219] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88013c6b58b8 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 14.885234] ACPI Error: Method parse/execution > @@ -14250,13 +14271,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 14.885277] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88013c6b5828 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 14.885277] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88013c6b5828 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 14.885289] ACPI Error: Method parse/execution > @@ -14410,13 +14432,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 17.125601] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] eee27810 > -klog (20110112/exresop-590) > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 17.125601] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] eee27810 (20110112 > +klog /exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 17.125618] ACPI Error: Method parse/execution > @@ -14427,13 +14450,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 17.125669] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] eee27780 > -klog (20110112/exresop-590) > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 17.125669] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] eee27780 (20110112 > +klog /exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 17.125690] ACPI Error: Method parse/execution > @@ -14513,13 +14537,14 @@ klog /GenericSerialBus write failed because the buffer was too > klog small, e) An index into a buffer was too long and fell > klog outside the buffer. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 18.054842] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff880133a777e0 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 18.054842] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff880133a777e0 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 18.054860] ACPI Error: Method parse/execution > @@ -14530,13 +14555,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 18.054909] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff880133a776c0 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 18.054909] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff880133a776c0 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 18.054932] ACPI Error: Method parse/execution > @@ -14660,13 +14686,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 20.135790] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88023b491318 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 20.135790] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88023b491318 > klog (20110316/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 20.135804] ACPI Error: Method parse/execution > @@ -14677,13 +14704,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 20.135849] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88023b491708 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 20.135849] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88023b491708 > klog (20110316/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 20.135864] ACPI Error: Method parse/execution > @@ -14694,14 +14722,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > -klog message: [ 20.149010] ACPI Error: Needed [Integer/String > -klog /Buffer], found [Package] f741ed48 (20100428/exresop-422) > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 20.149010] ACPI Error: Needed [Integer > +klog /String/Buffer], found [Package] f741ed48 (20100428 > +klog /exresop-422) > klog > -klog ADVICE: The kernel has most probably detected an error > -klog while executing ACPI AML. The error lists the ACPI driver > -klog module and the line number where the bug has been caught > -klog and the method that caused the error. > +klog ADVICE: An error occurred in resolving operands, required > +klog an Integer, String or Buffer type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 20.149032] ACPI Error (psparse-0537): Method > @@ -14762,13 +14790,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 21.562484] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] f7260370 > -klog (20090903/exresop-590) > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 21.562484] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] f7260370 (20090903 > +klog /exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 21.562496] ACPI Error (psparse-0537): Method > @@ -14852,13 +14881,14 @@ klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > klog been omitted. This can cause display switching issues. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 25.859931] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff880139af5240 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 25.859931] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff880139af5240 > klog (20090903/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 25.859949] ACPI Error (psparse-0537): Method > diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log > index 6fe05cd..445cc44 100644 > --- a/klog-0001/klog-0002.log > +++ b/klog-0001/klog-0002.log > @@ -5,7 +5,7 @@ summary > summary Test Failure Summary > summary ========================================================== > summary > -summary Critical failures: 34 > +summary Critical failures: 23 > summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219) > summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20100428/tbxfroot-219) > summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20110112/tbxfroot-219) > @@ -23,25 +23,14 @@ summary klog: CRITICAL Kernel message: [ 0.042302] ACPI Warning: Detect > summary klog: CRITICAL Kernel message: [ 0.042311] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x007F (20090903/psloop-522) > summary klog: CRITICAL Kernel message: [ 0.042322] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x0080 (20090903/psloop-522) > summary klog: CRITICAL Kernel message: [ 0.044066] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x678F (20100428/psloop-526) > -summary klog: CRITICAL Kernel message: [ 0.101941] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20110112/dsopcode-597) > -summary klog: CRITICAL Kernel message: [ 0.136585] ACPI Error: Field [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) (20090903/dsopcode-596) > -summary klog: CRITICAL Kernel message: [ 0.222980] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20090903/dsopcode-596) > -summary klog: CRITICAL Kernel message: [ 0.224987] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20100428/dsopcode-597) > summary klog: CRITICAL Kernel message: [ 0.296054] [Firmware Bug]: Invalid critical threshold (0) > -summary klog: CRITICAL Kernel message: [ 0.399990] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20110112/dsopcode-597) > -summary klog: CRITICAL Kernel message: [ 0.420241] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20100428/dsopcode-597) > -summary klog: CRITICAL Kernel message: [ 0.591722] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20100428/dsopcode-597) > -summary klog: CRITICAL Kernel message: [ 0.744106] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20090903/dsopcode-596) > summary klog: CRITICAL Kernel message: [ 0.788418] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88030a048b40), AE_AML_BUFFER_LIMIT > summary klog: CRITICAL Kernel message: [ 1.125427] [Firmware Bug]: No valid trip found > summary klog: CRITICAL Kernel message: [ 1.336148] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88012b647200), AE_AML_BUFFER_LIMIT > -summary klog: CRITICAL Kernel message: [ 1.371174] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) > summary klog: CRITICAL Kernel message: [ 1.371180] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88044b85e4a0), AE_AML_BUFFER_LIMIT > -summary klog: CRITICAL Kernel message: [ 2.949708] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110112/dsopcode-597) > summary klog: CRITICAL Kernel message: [ 2.949716] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node ffff880297016ca8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > -summary klog: CRITICAL Kernel message: [ 13.445954] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) > summary > -summary High failures: 1223 > +summary High failures: 1234 > summary klog: HIGH Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 > summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008018/0000000000008028, using 32 (20090903/tbfadt-427) > summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008020/0000000000008028, using 32 (20090903/tbfadt-427) > @@ -300,6 +289,7 @@ summary klog: HIGH Kernel message: [ 0.096257] ACPI Error: Could not ma > summary klog: HIGH Kernel message: [ 0.096273] ACPI Error: Method parse/execution failed [_PR_.CPU1.APCT] (Node f383e480), AE_NO_MEMORY (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.096285] ACPI Error: Method parse/execution failed [_PR_.CPU2.GCAP] (Node f383e4e0), AE_NO_MEMORY (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.096295] ACPI Error: Method parse/execution failed [_PR_.CPU2._PDC] (Node f383e4b0), AE_NO_MEMORY (20110112/psparse-536) > +summary klog: HIGH Kernel message: [ 0.101941] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20110112/dsopcode-597) > summary klog: HIGH Kernel message: [ 0.101946] ACPI Error: Method parse/execution failed [_SB_.MEM_._CRS] (Node f442af60), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.101953] ACPI Error: Method execution failed [_SB_.MEM_._CRS] (Node f442af60), AE_AML_BUFFER_LIMIT (20110112/uteval-103) > summary klog: HIGH Kernel message: [ 0.104297] ACPI Error (psargs-0359): [OSYS] Namespace lookup failure, AE_NOT_FOUND > @@ -317,6 +307,7 @@ summary klog: HIGH Kernel message: [ 0.120765] ACPI Warning for _SB_.PC > summary klog: HIGH Kernel message: [ 0.122347] ACPI Error: Could not map memory at 0x00000000000FFA32, size 0 (20100428/exregion-178) > summary klog: HIGH Kernel message: [ 0.122369] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.CPU0._PDC] (Node f70191c8), AE_NO_MEMORY > summary klog: HIGH Kernel message: [ 0.128150] ACPI Warning for _SB_.PCI0.P32_._PRT: Return Package has no elements (empty) (20090903/nspredef-433) > +summary klog: HIGH Kernel message: [ 0.136585] ACPI Error: Field [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) (20090903/dsopcode-596) > summary klog: HIGH Kernel message: [ 0.136600] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node dd8159d8), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.136637] ACPI Error (uteval-0250): Method execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node dd8159d8), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.140000] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 43003c) > @@ -431,10 +422,12 @@ summary klog: HIGH Kernel message: [ 0.220252] ACPI Error (uteval-0250) > summary klog: HIGH Kernel message: [ 0.221153] ACPI Error: Method parse/execution failed [_SB_.PCI0.HPET._CRS] (Node f402ae70), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.221220] ACPI Error: Method parse/execution failed [_SB_.PCI0.RTC_._CRS] (Node f402aee8), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.222211] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f701beb8), AE_ALREADY_EXISTS > +summary klog: HIGH Kernel message: [ 0.222980] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20090903/dsopcode-596) > summary klog: HIGH Kernel message: [ 0.222987] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node f7015900), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.223020] ACPI Error (uteval-0250): Method execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node f7015900), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.224289] ACPI Warning for _SB_.PCI0.P32_._PRT: Return Package has no elements (empty) (20100428/nspredef-456) > summary klog: HIGH Kernel message: [ 0.224569] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS > +summary klog: HIGH Kernel message: [ 0.224987] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20100428/dsopcode-597) > summary klog: HIGH Kernel message: [ 0.224994] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.MEM_._CRS] (Node f7021990), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.225018] ACPI Error (uteval-0250): Method execution failed [_SB_.MEM_._CRS] (Node f7021990), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.228032] ACPI Error (psargs-0359): [_PR_.C002._PPC] Namespace lookup failure, AE_NOT_FOUND > @@ -622,6 +615,7 @@ summary klog: HIGH Kernel message: [ 0.390341] ACPI Error: [GUR_._BAS] > summary klog: HIGH Kernel message: [ 0.390354] ACPI Error: Method parse/execution failed [_SB_.PCI0.MBIO._CRS] (Node ffff880078f30aa0), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.393086] ACPI Warning: For _TZ_.THRM._PSL: Return Package has no elements (empty) (20110413/nspredef-456) > summary klog: HIGH Kernel message: [ 0.395834] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node ffff88013ba393a0), AE_NOT_FOUND > +summary klog: HIGH Kernel message: [ 0.399990] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20110112/dsopcode-597) > summary klog: HIGH Kernel message: [ 0.399996] ACPI Error: Method parse/execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.400012] ACPI Error: Method execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000), AE_AML_BUFFER_LIMIT (20110112/uteval-103) > summary klog: HIGH Kernel message: [ 0.406016] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.ADP0.ADJP] (Node ffff88013ba3c5a0), AE_NOT_FOUND > @@ -630,6 +624,7 @@ summary klog: HIGH Kernel message: [ 0.408529] ACPI Error: Method parse > summary klog: HIGH Kernel message: [ 0.415975] ACPI Warning for _TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012) > summary klog: HIGH Kernel message: [ 0.420210] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143) > summary klog: HIGH Kernel message: [ 0.420218] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node ffff88022b749b18), AE_ALREADY_EXISTS (20110413/psparse-536) > +summary klog: HIGH Kernel message: [ 0.420241] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20100428/dsopcode-597) > summary klog: HIGH Kernel message: [ 0.420248] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff88013142fac0), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.420284] ACPI Error (uteval-0250): Method execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff88013142fac0), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.422032] ACPI Warning (dsobject-0501): Package List length (6) larger than NumElements count (3), truncated > @@ -686,6 +681,7 @@ summary klog: HIGH Kernel message: [ 0.541277] ACPI Error: Method parse > summary klog: HIGH Kernel message: [ 0.563415] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node ffff88003d9af848), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.566332] ACPI Warning: For _TZ_.THRM._AL0: Return Package has no elements (empty) (20110413/nspredef-456) > summary klog: HIGH Kernel message: [ 0.583718] ACPI Warning: _SB_.PCI0.PCI2._PRT: Return Package has no elements (empty) 20090521 nspredef-434 > +summary klog: HIGH Kernel message: [ 0.591722] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20100428/dsopcode-597) > summary klog: HIGH Kernel message: [ 0.591729] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.MEM_._CRS] (Node ffff8800b4040f60), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.591760] ACPI Error (uteval-0250): Method execution failed [_SB_.MEM_._CRS] (Node ffff8800b4040f60), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.593045] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.PPCE] (Node f702c7b0), AE_NOT_FOUND > @@ -745,6 +741,7 @@ summary klog: HIGH Kernel message: [ 0.743273] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 0.743525] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143) > summary klog: HIGH Kernel message: [ 0.743530] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node f50273d8), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.743538] ACPI Warning: For _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110112/nspredef-352) > +summary klog: HIGH Kernel message: [ 0.744106] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20090903/dsopcode-596) > summary klog: HIGH Kernel message: [ 0.744114] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.MEM_._CRS] (Node ffff88013ba44cc0), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.744142] ACPI Error (uteval-0250): Method execution failed [_SB_.MEM_._CRS] (Node ffff88013ba44cc0), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.772223] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node f4c250d8), AE_ALREADY_EXISTS (20101013/psparse-537) > @@ -851,6 +848,7 @@ summary klog: HIGH Kernel message: [ 1.280965] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 1.314561] ACPI Error: [ECPU] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) > summary klog: HIGH Kernel message: [ 1.314567] ACPI Error: Method parse/execution failed [_TZ_.TZ00._TMP] (Node ffff88011763ca28), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 1.337975] ACPI Error (uteval-0250): Method execution failed [J380._STA] (Node ffff88013712b380), AE_NOT_EXIST > +summary klog: HIGH Kernel message: [ 1.371174] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) > summary klog: HIGH Kernel message: [ 1.381411] ACPI Error (psparse-0537): Method parse/execution failed [] (Node ffffffff81a2b040), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 1.381481] ACPI Error (dswload-0659): [PCI0] Namespace lookup failure, AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 1.384655] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801393f91f8 (20090903/exresop-590) > @@ -1027,6 +1025,7 @@ summary klog: HIGH Kernel message: [ 2.861808] ACPI Error: [_SB_.PCI0.G > summary klog: HIGH Kernel message: [ 2.861812] ACPI Error: Method parse/execution failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88015746e168), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 2.870589] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff880137632c80), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 2.906610] ACPI Warning: For _SB_.PCI0.P0P2.PEGP._DOD: Return type mismatch - found Integer, expected Package (20110413/nspredef-1053) > +summary klog: HIGH Kernel message: [ 2.949708] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110112/dsopcode-597) > summary klog: HIGH Kernel message: [ 3.005123] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88122fc1ea00), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 3.112435] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.PPCE] (Node f74257c8), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 3.112465] ACPI Error (psparse-0537): Method parse/execution failed [EV4_] (Node f742c210), AE_NOT_FOUND > @@ -1175,6 +1174,7 @@ summary klog: HIGH Kernel message: [ 12.838979] cfg80211: Ignoring regu > summary klog: HIGH Kernel message: [ 12.841008] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain ACPI Warning: _BQC returned an invalid level (20110112/video-473) > summary klog: HIGH Kernel message: [ 13.024512] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node f7425450), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 13.396787] ACPI Error: Method parse/execution failed [_SB_.ADP1._PSR] (Node ffff88011763ba00), AE_TIME (20110112/psparse-536) > +summary klog: HIGH Kernel message: [ 13.445954] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) > summary klog: HIGH Kernel message: [ 13.445980] ACPI Error: Method parse/execution failed [_SB_.WMID.HWMC] (Node f742a8b8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 13.446019] ACPI Error: Method parse/execution failed [_SB_.WMID.WMAD] (Node f742aac8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 13.452167] ACPI Error (psargs-0359): [_PR_.C001] Namespace lookup failure, AE_NOT_FOUND > Acked-by: Ivan Hu <ivan.hu@canonical.com>
On 04/08/2013 07:16 PM, Colin King wrote: > From: Colin Ian King <colin.king@canonical.com> > > fwts klog test has change the error level of some of the failures > so we need to update the test to keep in sync. > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > klog-0001/klog-0001.log | 580 +++++++++++++++++++++++++----------------------- > klog-0001/klog-0002.log | 26 +-- > 2 files changed, 318 insertions(+), 288 deletions(-) > > diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log > index 27fecfd..9f6ed98 100644 > --- a/klog-0001/klog-0001.log > +++ b/klog-0001/klog-0001.log > @@ -2548,15 +2548,14 @@ klog > klog ADVICE: A Method has returned a Package List that was > klog larger than expected. > klog > -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > -klog message: [ 0.074070] ACPI Error: The DSDT has been > +klog FAILED [HIGH] KlogAcpiDsdtCorruptOrReplaced: Test 1, HIGH > +klog Kernel message: [ 0.074070] ACPI Error: The DSDT has been > klog corrupted or replaced - old, new headers below (20110413 > klog /tbutils-372) > klog > -klog ADVICE: The kernel has most probably detected an error > -klog while executing ACPI AML. The error lists the ACPI driver > -klog module and the line number where the bug has been caught > -klog and the method that caused the error. > +klog ADVICE: Some firmware corrupts the DSDT or installs a bad > +klog new DSDT, so a workaround is to copy the DSDT. Booting > +klog with kernel parameter acpi=copy_dsdt may fix this issue. > klog > klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > klog message: [ 0.074090] ACPI Error: Please send DMI info to > @@ -2905,12 +2904,13 @@ klog normally indicates that there is a bug in the compiled AML > klog code. It could be a programming fault or an AML compiler > klog issue. See acpi_ps_parse_aml(). > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.093544] ACPI Error: Needed type [Reference], > -klog found [Device] f7019f90 (20100428/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.093544] ACPI Error: Needed type > +klog [Reference], found [Device] f7019f90 (20100428 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1, > klog MEDIUM Kernel message: [ 0.094477] ACPI Warning: Incorrect > @@ -3054,14 +3054,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.101941] ACPI Error: Field > -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) > -klog (20110112/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.101941] ACPI Error: Field [ASSM] at > +klog 524320 exceeds Buffer [BUF0] size 880 (bits) (20110112 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.101946] ACPI Error: Method parse/execution > @@ -3153,12 +3153,13 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.109618] ACPI Error: Needed type [Reference], > -klog found [Device] f7012f90 (20090903/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.109618] ACPI Error: Needed type > +klog [Reference], found [Device] f7012f90 (20090903 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.109635] ACPI Error (psparse-0537): Method > @@ -3287,14 +3288,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.136585] ACPI Error: Field > -klog [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) > -klog (20090903/dsopcode-596) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.136585] ACPI Error: Field [ALB2] at > +klog 120 exceeds Buffer [CRSA] size 104 (bits) (20090903 > +klog /dsopcode-596) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.136600] ACPI Error (psparse-0537): Method > @@ -3818,12 +3819,13 @@ klog ADVICE: It appears that PCI config space has been > klog configured for a specific device but does not appear to be > klog reserved by the ACPI motherboard resources. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.177377] ACPI Error: Needed type [Reference], > -klog found [Device] f701af90 (20100428/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.177377] ACPI Error: Needed type > +klog [Reference], found [Device] f701af90 (20100428 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.177377] ACPI Error (psparse-0537): Method > @@ -4300,12 +4302,13 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.189086] ACPI Error: Needed type [Reference], > -klog found [Device] f700ff90 (20090903/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.189086] ACPI Error: Needed type > +klog [Reference], found [Device] f700ff90 (20090903 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.189100] ACPI Error (psparse-0537): Method > @@ -4316,12 +4319,12 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.189451] ACPI Error: Needed type [Reference], > -klog found [Device] f700ef90 20090521 exresop-104 > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.189451] ACPI Error: Needed type > +klog [Reference], found [Device] f700ef90 20090521 exresop-104 > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.189466] ACPI Error (psparse-0537): Method > @@ -4998,14 +5001,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.222980] ACPI Error: Field > -klog [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) > -klog (20090903/dsopcode-596) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.222980] ACPI Error: Field [I9MN] at > +klog 544 exceeds Buffer [IORT] size 464 (bits) (20090903 > +klog /dsopcode-596) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.222987] ACPI Error (psparse-0537): Method > @@ -5073,14 +5076,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.224987] ACPI Error: Field > -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) > -klog (20100428/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.224987] ACPI Error: Field [ASSM] at > +klog 524320 exceeds Buffer [BUF0] size 688 (bits) (20100428 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.224994] ACPI Error (psparse-0537): Method > @@ -6105,12 +6108,13 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.321722] ACPI Error: Needed type [Reference], > -klog found [Device] ffff88007552b900 (20100428/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.321722] ACPI Error: Needed type > +klog [Reference], found [Device] ffff88007552b900 (20100428 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.321740] ACPI Error (psparse-0537): Method > @@ -6409,12 +6413,13 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.331637] ACPI Error: Needed type [Reference], > -klog found [Device] ffff88014b82d820 (20090903/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.331637] ACPI Error: Needed type > +klog [Reference], found [Device] ffff88014b82d820 (20090903 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.331653] ACPI Error (psparse-0537): Method > @@ -6425,12 +6430,13 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.331820] ACPI Error: Needed type [Reference], > -klog found [Device] ffff8800379aa900 (20100428/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.331820] ACPI Error: Needed type > +klog [Reference], found [Device] ffff8800379aa900 (20100428 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.331838] ACPI Error (psparse-0537): Method > @@ -7058,12 +7064,13 @@ klog while executing ACPI AML. The error lists the ACPI driver > klog module and the line number where the bug has been caught > klog and the method that caused the error. > klog > -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel > -klog message: [ 0.353652] ACPI Error: Needed type [Reference], > -klog found [Device] ffff8800379a6800 (20090903/exresop-104) > +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH > +klog Kernel message: [ 0.353652] ACPI Error: Needed type > +klog [Reference], found [Device] ffff8800379a6800 (20090903 > +klog /exresop-104) > klog > -klog ADVICE: An ACPI Method has returned an Device type when a > -klog Reference type was expected. > +klog ADVICE: An ACPI object type did not match the expected > +klog type. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 0.353652] ACPI Error (psparse-0537): Method > @@ -7083,15 +7090,15 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > -klog message: [ 0.355798] ACPI Error: ACPI path has too many > -klog parent prefixes (^) - reached beyond root node (20090903 > -klog /nsaccess-429) > +klog FAILED [HIGH] KlogAcpiPathTooManyParentPrefixes: Test 1, > +klog HIGH Kernel message: [ 0.355798] ACPI Error: ACPI path has > +klog too many parent prefixes (^) - reached beyond root node > +klog (20090903/nsaccess-429) > klog > -klog ADVICE: The kernel has most probably detected an error > -klog while executing ACPI AML. The error lists the ACPI driver > -klog module and the line number where the bug has been caught > -klog and the method that caused the error. > +klog ADVICE: An ACPI path has too many parent prefixes and has > +klog fallen outside the root node. This is a bug in the > +klog firmware. The Name Space lookup on the ACPI path cannot be > +klog found. > klog > klog FAILED [HIGH] KlogBiosTimerNotConnectedtoIoApic: Test 1, > klog HIGH Kernel message: [ 0.356001] ..MP-BIOS bug: 8254 timer > @@ -7212,15 +7219,15 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > -klog message: [ 0.361596] ACPI Error: ACPI path has too many > -klog parent prefixes (^) - reached beyond root node (20100428 > -klog /nsaccess-429) > +klog FAILED [HIGH] KlogAcpiPathTooManyParentPrefixes: Test 1, > +klog HIGH Kernel message: [ 0.361596] ACPI Error: ACPI path has > +klog too many parent prefixes (^) - reached beyond root node > +klog (20100428/nsaccess-429) > klog > -klog ADVICE: The kernel has most probably detected an error > -klog while executing ACPI AML. The error lists the ACPI driver > -klog module and the line number where the bug has been caught > -klog and the method that caused the error. > +klog ADVICE: An ACPI path has too many parent prefixes and has > +klog fallen outside the root node. This is a bug in the > +klog firmware. The Name Space lookup on the ACPI path cannot be > +klog found. > klog > klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel > klog message: [ 0.362481] ACPI Error (psparse-0537): Method > @@ -7711,14 +7718,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.399990] ACPI Error: Field > -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) > -klog (20110112/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.399990] ACPI Error: Field [ASSM] at > +klog 524320 exceeds Buffer [BUF0] size 688 (bits) (20110112 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.399996] ACPI Error: Method parse/execution > @@ -7858,14 +7865,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.420241] ACPI Error: Field > -klog [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) > -klog (20100428/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.420241] ACPI Error: Field [I9MN] at > +klog 544 exceeds Buffer [IORT] size 464 (bits) (20100428 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.420248] ACPI Error (psparse-0537): Method > @@ -8605,14 +8612,14 @@ klog ADVICE: The ACPI table listed above has an incorrect > klog checksum, this could be a BIOS bug or due to table > klog corruption. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.591722] ACPI Error: Field > -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) > -klog (20100428/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.591722] ACPI Error: Field [ASSM] at > +klog 524320 exceeds Buffer [BUF0] size 880 (bits) (20100428 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.591729] ACPI Error (psparse-0537): Method > @@ -9477,14 +9484,14 @@ klog ADVICE: The ACPI Method was executing with a different > klog number of parameters than the Method expected. This should > klog be fixed. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 0.744106] ACPI Error: Field > -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) > -klog (20090903/dsopcode-596) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 0.744106] ACPI Error: Field [ASSM] at > +klog 524320 exceeds Buffer [BUF0] size 880 (bits) (20090903 > +klog /dsopcode-596) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 0.744114] ACPI Error (psparse-0537): Method > @@ -10634,14 +10641,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH > +klog FAILED [HIGH] KlogAcpiKlogRegionNoHandler: Test 1, HIGH > klog Kernel message: [ 1.246164] ACPI Error: Region > klog EmbeddedControl (ID=3) has no handler (20110413 > klog /exfldio-292) > klog > -klog ADVICE: This is a bug picked up by the kernel, but as yet, > -klog the firmware test suite has no diagnostic advice for this > -klog particular problem. > +klog ADVICE: An access (read or write) to an operation region > +klog has been attempted and a region handler for this has not > +klog been implemented, this may need to be implemented to > +klog provide the expected behaviour. See > +klog acpi_ex_access_region(). > klog > klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH > klog Kernel message: [ 1.246169] ACPI Error: Method parse > @@ -10785,14 +10794,14 @@ klog some AML because a object or control did not exist. This > klog normally occurs because of buggy firmware and may lead to > klog unexpected behaviour or loss of functionality. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 1.371174] ACPI Error: Field > -klog [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) > -klog (20090903/dsopcode-596) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 1.371174] ACPI Error: Field [CDW3] at 96 > +klog exceeds Buffer [NULL] size 64 (bits) (20090903 > +klog /dsopcode-596) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1, > klog CRITICAL Kernel message: [ 1.371180] ACPI Error > @@ -10822,13 +10831,14 @@ klog ADVICE: The kernel has detected an error trying to execute > klog an Method and it cannot find an object. This is indicates > klog a bug in the DSDT or SSDT AML code. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 1.384655] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff8801393f91f8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 1.384655] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff8801393f91f8 > klog (20090903/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 1.384672] ACPI Error (psparse-0537): Method > @@ -11196,13 +11206,14 @@ klog some AML because a object or control did not exist. This > klog normally occurs because of buggy firmware and may lead to > klog unexpected behaviour or loss of functionality. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 1.678325] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88022f7bb5e8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 1.678325] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88022f7bb5e8 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 1.678342] ACPI Error: Method parse/execution > @@ -11213,13 +11224,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 1.678390] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88022f7bb8b8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 1.678390] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88022f7bb8b8 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 1.678412] ACPI Error: Method parse/execution > @@ -12177,14 +12189,13 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > -klog message: [ 2.334361] ACPI Error: Attempt to CreateField of > -klog length zero (20110112/dsopcode-529) > +klog FAILED [HIGH] KlogAcpiZeroLengthCreateField: Test 1, HIGH > +klog Kernel message: [ 2.334361] ACPI Error: Attempt to > +klog CreateField of length zero (20110112/dsopcode-529) > klog > -klog ADVICE: The kernel has most probably detected an error > -klog while executing ACPI AML. The error lists the ACPI driver > -klog module and the line number where the bug has been caught > -klog and the method that caused the error. > +klog ADVICE: Failed to initialise an ACPI buffer field, > +klog CreateField used with a zero field length which is > +klog illegal. This is a firmware bug. > klog > klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH > klog Kernel message: [ 2.334370] ACPI Error: Method parse > @@ -12517,14 +12528,14 @@ klog > klog ADVICE: The ACPI Method returned an incorrect type, this > klog should be fixed. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 2.949708] ACPI Error: Field > -klog [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) > -klog (20110112/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 2.949708] ACPI Error: Field [CDW3] at 96 > +klog exceeds Buffer [NULL] size 64 (bits) (20110112 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1, > klog CRITICAL Kernel message: [ 2.949716] ACPI Error: Method > @@ -13350,13 +13361,14 @@ klog > klog ADVICE: Could not set the brightness level, the ACPI > klog control _BCM failed to execute correctly. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 9.393479] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012d8cfee8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 9.393479] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012d8cfee8 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 9.393498] ACPI Error: Method parse/execution > @@ -13376,13 +13388,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 9.394098] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012d8cfd38 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 9.394098] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012d8cfd38 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 9.394109] ACPI Error: Method parse/execution > @@ -13447,13 +13460,14 @@ klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > klog been omitted. This can cause display switching issues. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 10.120967] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88023bcba438 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 10.120967] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88023bcba438 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 10.120977] ACPI Error: Method parse/execution > @@ -13464,13 +13478,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 10.121007] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88023bcba1b0 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 10.121007] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88023bcba1b0 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 10.121018] ACPI Error: Method parse/execution > @@ -13860,21 +13875,23 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 11.880473] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012125f558 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 11.880473] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012125f558 > klog (20110413/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 11.880998] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012125f3a8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 11.880998] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012125f3a8 > klog (20110413/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH > klog Kernel message: [ 11.915871] ACPI Error (psparse-0537): > @@ -13944,13 +13961,14 @@ klog ADVICE: The ACPI driver encountered an error executing > klog some ACPI AML code which originated from a device timing > klog out. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 12.167076] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff8800b1753048 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 12.167076] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff8800b1753048 > klog (20090903/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 12.167089] ACPI Error (psparse-0537): Method > @@ -13977,13 +13995,14 @@ klog > klog ADVICE: Executing the ACPI Method leaded in an execution > klog failure. This needs investigating. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 12.242368] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012ea6e6c0 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 12.242368] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012ea6e6c0 > klog (20110413/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 12.242387] ACPI Error: Method parse/execution > @@ -14010,13 +14029,14 @@ klog > klog ADVICE: Executing the ACPI Method leaded in an execution > klog failure. This needs investigating. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 12.242974] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88012ea6e5e8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 12.242974] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88012ea6e5e8 > klog (20110413/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 12.242986] ACPI Error: Method parse/execution > @@ -14127,14 +14147,14 @@ klog ADVICE: The ACPI driver encountered an error executing > klog some ACPI AML code which originated from a device timing > klog out. > klog > -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, > -klog CRITICAL Kernel message: [ 13.445954] ACPI Error: Field > -klog [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) > -klog (20110112/dsopcode-597) > +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH > +klog Kernel message: [ 13.445954] ACPI Error: Field [D128] at > +klog 1040 exceeds Buffer [NULL] size 160 (bits) (20110112 > +klog /dsopcode-597) > klog > -klog ADVICE: The field exceeds the allocated buffer size. This > -klog can lead to unexpected results when fetching data outside > -klog this region. > +klog ADVICE: Failed to initialise an ACPI buffer field, the > +klog field exceeded the buffer size provided. This is a > +klog firmware bug. > klog > klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel > klog message: [ 13.445980] ACPI Error: Method parse/execution > @@ -14233,13 +14253,14 @@ klog > klog ADVICE: Executing the ACPI Method leaded in an execution > klog failure. This needs investigating. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 14.885219] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88013c6b58b8 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 14.885219] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88013c6b58b8 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 14.885234] ACPI Error: Method parse/execution > @@ -14250,13 +14271,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 14.885277] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88013c6b5828 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 14.885277] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88013c6b5828 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 14.885289] ACPI Error: Method parse/execution > @@ -14410,13 +14432,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 17.125601] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] eee27810 > -klog (20110112/exresop-590) > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 17.125601] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] eee27810 (20110112 > +klog /exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 17.125618] ACPI Error: Method parse/execution > @@ -14427,13 +14450,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 17.125669] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] eee27780 > -klog (20110112/exresop-590) > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 17.125669] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] eee27780 (20110112 > +klog /exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 17.125690] ACPI Error: Method parse/execution > @@ -14513,13 +14537,14 @@ klog /GenericSerialBus write failed because the buffer was too > klog small, e) An index into a buffer was too long and fell > klog outside the buffer. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 18.054842] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff880133a777e0 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 18.054842] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff880133a777e0 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 18.054860] ACPI Error: Method parse/execution > @@ -14530,13 +14555,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 18.054909] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff880133a776c0 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 18.054909] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff880133a776c0 > klog (20110112/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 18.054932] ACPI Error: Method parse/execution > @@ -14660,13 +14686,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 20.135790] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88023b491318 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 20.135790] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88023b491318 > klog (20110316/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 20.135804] ACPI Error: Method parse/execution > @@ -14677,13 +14704,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 20.135849] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff88023b491708 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 20.135849] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff88023b491708 > klog (20110316/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 20.135864] ACPI Error: Method parse/execution > @@ -14694,14 +14722,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel > -klog message: [ 20.149010] ACPI Error: Needed [Integer/String > -klog /Buffer], found [Package] f741ed48 (20100428/exresop-422) > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 20.149010] ACPI Error: Needed [Integer > +klog /String/Buffer], found [Package] f741ed48 (20100428 > +klog /exresop-422) > klog > -klog ADVICE: The kernel has most probably detected an error > -klog while executing ACPI AML. The error lists the ACPI driver > -klog module and the line number where the bug has been caught > -klog and the method that caused the error. > +klog ADVICE: An error occurred in resolving operands, required > +klog an Integer, String or Buffer type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 20.149032] ACPI Error (psparse-0537): Method > @@ -14762,13 +14790,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, > klog the firmware test suite has no diagnostic advice for this > klog particular problem. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 21.562484] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] f7260370 > -klog (20090903/exresop-590) > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 21.562484] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] f7260370 (20090903 > +klog /exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 21.562496] ACPI Error (psparse-0537): Method > @@ -14852,13 +14881,14 @@ klog to display adapter) is defined but we should also have > klog _DOS (Enable/Disable output switching) defined but it's > klog been omitted. This can cause display switching issues. > klog > -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test > -klog 1, HIGH Kernel message: [ 25.859931] ACPI Error: Needed > -klog [Buffer/String/Package], found [Integer] ffff880139af5240 > +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH > +klog Kernel message: [ 25.859931] ACPI Error: Needed [Buffer > +klog /String/Package], found [Integer] ffff880139af5240 > klog (20090903/exresop-590) > klog > -klog ADVICE: An ACPI Method has returned an Integer type when a > -klog Buffer, String or Package was expected. > +klog ADVICE: An error occurred in resolving operands, required > +klog a Buffer, String or Package type, got a different type > +klog instead. > klog > klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel > klog message: [ 25.859949] ACPI Error (psparse-0537): Method > diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log > index 6fe05cd..445cc44 100644 > --- a/klog-0001/klog-0002.log > +++ b/klog-0001/klog-0002.log > @@ -5,7 +5,7 @@ summary > summary Test Failure Summary > summary ========================================================== > summary > -summary Critical failures: 34 > +summary Critical failures: 23 > summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219) > summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20100428/tbxfroot-219) > summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20110112/tbxfroot-219) > @@ -23,25 +23,14 @@ summary klog: CRITICAL Kernel message: [ 0.042302] ACPI Warning: Detect > summary klog: CRITICAL Kernel message: [ 0.042311] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x007F (20090903/psloop-522) > summary klog: CRITICAL Kernel message: [ 0.042322] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x0080 (20090903/psloop-522) > summary klog: CRITICAL Kernel message: [ 0.044066] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x678F (20100428/psloop-526) > -summary klog: CRITICAL Kernel message: [ 0.101941] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20110112/dsopcode-597) > -summary klog: CRITICAL Kernel message: [ 0.136585] ACPI Error: Field [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) (20090903/dsopcode-596) > -summary klog: CRITICAL Kernel message: [ 0.222980] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20090903/dsopcode-596) > -summary klog: CRITICAL Kernel message: [ 0.224987] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20100428/dsopcode-597) > summary klog: CRITICAL Kernel message: [ 0.296054] [Firmware Bug]: Invalid critical threshold (0) > -summary klog: CRITICAL Kernel message: [ 0.399990] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20110112/dsopcode-597) > -summary klog: CRITICAL Kernel message: [ 0.420241] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20100428/dsopcode-597) > -summary klog: CRITICAL Kernel message: [ 0.591722] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20100428/dsopcode-597) > -summary klog: CRITICAL Kernel message: [ 0.744106] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20090903/dsopcode-596) > summary klog: CRITICAL Kernel message: [ 0.788418] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88030a048b40), AE_AML_BUFFER_LIMIT > summary klog: CRITICAL Kernel message: [ 1.125427] [Firmware Bug]: No valid trip found > summary klog: CRITICAL Kernel message: [ 1.336148] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88012b647200), AE_AML_BUFFER_LIMIT > -summary klog: CRITICAL Kernel message: [ 1.371174] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) > summary klog: CRITICAL Kernel message: [ 1.371180] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88044b85e4a0), AE_AML_BUFFER_LIMIT > -summary klog: CRITICAL Kernel message: [ 2.949708] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110112/dsopcode-597) > summary klog: CRITICAL Kernel message: [ 2.949716] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node ffff880297016ca8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > -summary klog: CRITICAL Kernel message: [ 13.445954] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) > summary > -summary High failures: 1223 > +summary High failures: 1234 > summary klog: HIGH Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 > summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008018/0000000000008028, using 32 (20090903/tbfadt-427) > summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008020/0000000000008028, using 32 (20090903/tbfadt-427) > @@ -300,6 +289,7 @@ summary klog: HIGH Kernel message: [ 0.096257] ACPI Error: Could not ma > summary klog: HIGH Kernel message: [ 0.096273] ACPI Error: Method parse/execution failed [_PR_.CPU1.APCT] (Node f383e480), AE_NO_MEMORY (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.096285] ACPI Error: Method parse/execution failed [_PR_.CPU2.GCAP] (Node f383e4e0), AE_NO_MEMORY (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.096295] ACPI Error: Method parse/execution failed [_PR_.CPU2._PDC] (Node f383e4b0), AE_NO_MEMORY (20110112/psparse-536) > +summary klog: HIGH Kernel message: [ 0.101941] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20110112/dsopcode-597) > summary klog: HIGH Kernel message: [ 0.101946] ACPI Error: Method parse/execution failed [_SB_.MEM_._CRS] (Node f442af60), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.101953] ACPI Error: Method execution failed [_SB_.MEM_._CRS] (Node f442af60), AE_AML_BUFFER_LIMIT (20110112/uteval-103) > summary klog: HIGH Kernel message: [ 0.104297] ACPI Error (psargs-0359): [OSYS] Namespace lookup failure, AE_NOT_FOUND > @@ -317,6 +307,7 @@ summary klog: HIGH Kernel message: [ 0.120765] ACPI Warning for _SB_.PC > summary klog: HIGH Kernel message: [ 0.122347] ACPI Error: Could not map memory at 0x00000000000FFA32, size 0 (20100428/exregion-178) > summary klog: HIGH Kernel message: [ 0.122369] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.CPU0._PDC] (Node f70191c8), AE_NO_MEMORY > summary klog: HIGH Kernel message: [ 0.128150] ACPI Warning for _SB_.PCI0.P32_._PRT: Return Package has no elements (empty) (20090903/nspredef-433) > +summary klog: HIGH Kernel message: [ 0.136585] ACPI Error: Field [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) (20090903/dsopcode-596) > summary klog: HIGH Kernel message: [ 0.136600] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node dd8159d8), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.136637] ACPI Error (uteval-0250): Method execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node dd8159d8), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.140000] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 43003c) > @@ -431,10 +422,12 @@ summary klog: HIGH Kernel message: [ 0.220252] ACPI Error (uteval-0250) > summary klog: HIGH Kernel message: [ 0.221153] ACPI Error: Method parse/execution failed [_SB_.PCI0.HPET._CRS] (Node f402ae70), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.221220] ACPI Error: Method parse/execution failed [_SB_.PCI0.RTC_._CRS] (Node f402aee8), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.222211] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f701beb8), AE_ALREADY_EXISTS > +summary klog: HIGH Kernel message: [ 0.222980] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20090903/dsopcode-596) > summary klog: HIGH Kernel message: [ 0.222987] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node f7015900), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.223020] ACPI Error (uteval-0250): Method execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node f7015900), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.224289] ACPI Warning for _SB_.PCI0.P32_._PRT: Return Package has no elements (empty) (20100428/nspredef-456) > summary klog: HIGH Kernel message: [ 0.224569] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS > +summary klog: HIGH Kernel message: [ 0.224987] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20100428/dsopcode-597) > summary klog: HIGH Kernel message: [ 0.224994] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.MEM_._CRS] (Node f7021990), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.225018] ACPI Error (uteval-0250): Method execution failed [_SB_.MEM_._CRS] (Node f7021990), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.228032] ACPI Error (psargs-0359): [_PR_.C002._PPC] Namespace lookup failure, AE_NOT_FOUND > @@ -622,6 +615,7 @@ summary klog: HIGH Kernel message: [ 0.390341] ACPI Error: [GUR_._BAS] > summary klog: HIGH Kernel message: [ 0.390354] ACPI Error: Method parse/execution failed [_SB_.PCI0.MBIO._CRS] (Node ffff880078f30aa0), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.393086] ACPI Warning: For _TZ_.THRM._PSL: Return Package has no elements (empty) (20110413/nspredef-456) > summary klog: HIGH Kernel message: [ 0.395834] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node ffff88013ba393a0), AE_NOT_FOUND > +summary klog: HIGH Kernel message: [ 0.399990] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20110112/dsopcode-597) > summary klog: HIGH Kernel message: [ 0.399996] ACPI Error: Method parse/execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.400012] ACPI Error: Method execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000), AE_AML_BUFFER_LIMIT (20110112/uteval-103) > summary klog: HIGH Kernel message: [ 0.406016] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.ADP0.ADJP] (Node ffff88013ba3c5a0), AE_NOT_FOUND > @@ -630,6 +624,7 @@ summary klog: HIGH Kernel message: [ 0.408529] ACPI Error: Method parse > summary klog: HIGH Kernel message: [ 0.415975] ACPI Warning for _TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012) > summary klog: HIGH Kernel message: [ 0.420210] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143) > summary klog: HIGH Kernel message: [ 0.420218] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node ffff88022b749b18), AE_ALREADY_EXISTS (20110413/psparse-536) > +summary klog: HIGH Kernel message: [ 0.420241] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20100428/dsopcode-597) > summary klog: HIGH Kernel message: [ 0.420248] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff88013142fac0), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.420284] ACPI Error (uteval-0250): Method execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff88013142fac0), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.422032] ACPI Warning (dsobject-0501): Package List length (6) larger than NumElements count (3), truncated > @@ -686,6 +681,7 @@ summary klog: HIGH Kernel message: [ 0.541277] ACPI Error: Method parse > summary klog: HIGH Kernel message: [ 0.563415] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node ffff88003d9af848), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.566332] ACPI Warning: For _TZ_.THRM._AL0: Return Package has no elements (empty) (20110413/nspredef-456) > summary klog: HIGH Kernel message: [ 0.583718] ACPI Warning: _SB_.PCI0.PCI2._PRT: Return Package has no elements (empty) 20090521 nspredef-434 > +summary klog: HIGH Kernel message: [ 0.591722] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20100428/dsopcode-597) > summary klog: HIGH Kernel message: [ 0.591729] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.MEM_._CRS] (Node ffff8800b4040f60), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.591760] ACPI Error (uteval-0250): Method execution failed [_SB_.MEM_._CRS] (Node ffff8800b4040f60), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.593045] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.PPCE] (Node f702c7b0), AE_NOT_FOUND > @@ -745,6 +741,7 @@ summary klog: HIGH Kernel message: [ 0.743273] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 0.743525] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143) > summary klog: HIGH Kernel message: [ 0.743530] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node f50273d8), AE_ALREADY_EXISTS (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 0.743538] ACPI Warning: For _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110112/nspredef-352) > +summary klog: HIGH Kernel message: [ 0.744106] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20090903/dsopcode-596) > summary klog: HIGH Kernel message: [ 0.744114] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.MEM_._CRS] (Node ffff88013ba44cc0), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.744142] ACPI Error (uteval-0250): Method execution failed [_SB_.MEM_._CRS] (Node ffff88013ba44cc0), AE_AML_BUFFER_LIMIT > summary klog: HIGH Kernel message: [ 0.772223] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node f4c250d8), AE_ALREADY_EXISTS (20101013/psparse-537) > @@ -851,6 +848,7 @@ summary klog: HIGH Kernel message: [ 1.280965] ACPI Error (psparse-0537 > summary klog: HIGH Kernel message: [ 1.314561] ACPI Error: [ECPU] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) > summary klog: HIGH Kernel message: [ 1.314567] ACPI Error: Method parse/execution failed [_TZ_.TZ00._TMP] (Node ffff88011763ca28), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 1.337975] ACPI Error (uteval-0250): Method execution failed [J380._STA] (Node ffff88013712b380), AE_NOT_EXIST > +summary klog: HIGH Kernel message: [ 1.371174] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) > summary klog: HIGH Kernel message: [ 1.381411] ACPI Error (psparse-0537): Method parse/execution failed [] (Node ffffffff81a2b040), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 1.381481] ACPI Error (dswload-0659): [PCI0] Namespace lookup failure, AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 1.384655] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801393f91f8 (20090903/exresop-590) > @@ -1027,6 +1025,7 @@ summary klog: HIGH Kernel message: [ 2.861808] ACPI Error: [_SB_.PCI0.G > summary klog: HIGH Kernel message: [ 2.861812] ACPI Error: Method parse/execution failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88015746e168), AE_NOT_FOUND (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 2.870589] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff880137632c80), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 2.906610] ACPI Warning: For _SB_.PCI0.P0P2.PEGP._DOD: Return type mismatch - found Integer, expected Package (20110413/nspredef-1053) > +summary klog: HIGH Kernel message: [ 2.949708] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110112/dsopcode-597) > summary klog: HIGH Kernel message: [ 3.005123] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88122fc1ea00), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 3.112435] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.PPCE] (Node f74257c8), AE_NOT_FOUND > summary klog: HIGH Kernel message: [ 3.112465] ACPI Error (psparse-0537): Method parse/execution failed [EV4_] (Node f742c210), AE_NOT_FOUND > @@ -1175,6 +1174,7 @@ summary klog: HIGH Kernel message: [ 12.838979] cfg80211: Ignoring regu > summary klog: HIGH Kernel message: [ 12.841008] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain ACPI Warning: _BQC returned an invalid level (20110112/video-473) > summary klog: HIGH Kernel message: [ 13.024512] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node f7425450), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 13.396787] ACPI Error: Method parse/execution failed [_SB_.ADP1._PSR] (Node ffff88011763ba00), AE_TIME (20110112/psparse-536) > +summary klog: HIGH Kernel message: [ 13.445954] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) > summary klog: HIGH Kernel message: [ 13.445980] ACPI Error: Method parse/execution failed [_SB_.WMID.HWMC] (Node f742a8b8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 13.446019] ACPI Error: Method parse/execution failed [_SB_.WMID.WMAD] (Node f742aac8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) > summary klog: HIGH Kernel message: [ 13.452167] ACPI Error (psargs-0359): [_PR_.C001] Namespace lookup failure, AE_NOT_FOUND > Acked-by: Alex Hung <alex.hung@canonical.com>
diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log index 27fecfd..9f6ed98 100644 --- a/klog-0001/klog-0001.log +++ b/klog-0001/klog-0001.log @@ -2548,15 +2548,14 @@ klog klog ADVICE: A Method has returned a Package List that was klog larger than expected. klog -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel -klog message: [ 0.074070] ACPI Error: The DSDT has been +klog FAILED [HIGH] KlogAcpiDsdtCorruptOrReplaced: Test 1, HIGH +klog Kernel message: [ 0.074070] ACPI Error: The DSDT has been klog corrupted or replaced - old, new headers below (20110413 klog /tbutils-372) klog -klog ADVICE: The kernel has most probably detected an error -klog while executing ACPI AML. The error lists the ACPI driver -klog module and the line number where the bug has been caught -klog and the method that caused the error. +klog ADVICE: Some firmware corrupts the DSDT or installs a bad +klog new DSDT, so a workaround is to copy the DSDT. Booting +klog with kernel parameter acpi=copy_dsdt may fix this issue. klog klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel klog message: [ 0.074090] ACPI Error: Please send DMI info to @@ -2905,12 +2904,13 @@ klog normally indicates that there is a bug in the compiled AML klog code. It could be a programming fault or an AML compiler klog issue. See acpi_ps_parse_aml(). klog -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel -klog message: [ 0.093544] ACPI Error: Needed type [Reference], -klog found [Device] f7019f90 (20100428/exresop-104) +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH +klog Kernel message: [ 0.093544] ACPI Error: Needed type +klog [Reference], found [Device] f7019f90 (20100428 +klog /exresop-104) klog -klog ADVICE: An ACPI Method has returned an Device type when a -klog Reference type was expected. +klog ADVICE: An ACPI object type did not match the expected +klog type. klog klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1, klog MEDIUM Kernel message: [ 0.094477] ACPI Warning: Incorrect @@ -3054,14 +3054,14 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 0.101941] ACPI Error: Field -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) -klog (20110112/dsopcode-597) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 0.101941] ACPI Error: Field [ASSM] at +klog 524320 exceeds Buffer [BUF0] size 880 (bits) (20110112 +klog /dsopcode-597) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel klog message: [ 0.101946] ACPI Error: Method parse/execution @@ -3153,12 +3153,13 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel -klog message: [ 0.109618] ACPI Error: Needed type [Reference], -klog found [Device] f7012f90 (20090903/exresop-104) +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH +klog Kernel message: [ 0.109618] ACPI Error: Needed type +klog [Reference], found [Device] f7012f90 (20090903 +klog /exresop-104) klog -klog ADVICE: An ACPI Method has returned an Device type when a -klog Reference type was expected. +klog ADVICE: An ACPI object type did not match the expected +klog type. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 0.109635] ACPI Error (psparse-0537): Method @@ -3287,14 +3288,14 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 0.136585] ACPI Error: Field -klog [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) -klog (20090903/dsopcode-596) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 0.136585] ACPI Error: Field [ALB2] at +klog 120 exceeds Buffer [CRSA] size 104 (bits) (20090903 +klog /dsopcode-596) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel klog message: [ 0.136600] ACPI Error (psparse-0537): Method @@ -3818,12 +3819,13 @@ klog ADVICE: It appears that PCI config space has been klog configured for a specific device but does not appear to be klog reserved by the ACPI motherboard resources. klog -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel -klog message: [ 0.177377] ACPI Error: Needed type [Reference], -klog found [Device] f701af90 (20100428/exresop-104) +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH +klog Kernel message: [ 0.177377] ACPI Error: Needed type +klog [Reference], found [Device] f701af90 (20100428 +klog /exresop-104) klog -klog ADVICE: An ACPI Method has returned an Device type when a -klog Reference type was expected. +klog ADVICE: An ACPI object type did not match the expected +klog type. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 0.177377] ACPI Error (psparse-0537): Method @@ -4300,12 +4302,13 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel -klog message: [ 0.189086] ACPI Error: Needed type [Reference], -klog found [Device] f700ff90 (20090903/exresop-104) +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH +klog Kernel message: [ 0.189086] ACPI Error: Needed type +klog [Reference], found [Device] f700ff90 (20090903 +klog /exresop-104) klog -klog ADVICE: An ACPI Method has returned an Device type when a -klog Reference type was expected. +klog ADVICE: An ACPI object type did not match the expected +klog type. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 0.189100] ACPI Error (psparse-0537): Method @@ -4316,12 +4319,12 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel -klog message: [ 0.189451] ACPI Error: Needed type [Reference], -klog found [Device] f700ef90 20090521 exresop-104 +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH +klog Kernel message: [ 0.189451] ACPI Error: Needed type +klog [Reference], found [Device] f700ef90 20090521 exresop-104 klog -klog ADVICE: An ACPI Method has returned an Device type when a -klog Reference type was expected. +klog ADVICE: An ACPI object type did not match the expected +klog type. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 0.189466] ACPI Error (psparse-0537): Method @@ -4998,14 +5001,14 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 0.222980] ACPI Error: Field -klog [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) -klog (20090903/dsopcode-596) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 0.222980] ACPI Error: Field [I9MN] at +klog 544 exceeds Buffer [IORT] size 464 (bits) (20090903 +klog /dsopcode-596) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel klog message: [ 0.222987] ACPI Error (psparse-0537): Method @@ -5073,14 +5076,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 0.224987] ACPI Error: Field -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) -klog (20100428/dsopcode-597) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 0.224987] ACPI Error: Field [ASSM] at +klog 524320 exceeds Buffer [BUF0] size 688 (bits) (20100428 +klog /dsopcode-597) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel klog message: [ 0.224994] ACPI Error (psparse-0537): Method @@ -6105,12 +6108,13 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel -klog message: [ 0.321722] ACPI Error: Needed type [Reference], -klog found [Device] ffff88007552b900 (20100428/exresop-104) +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH +klog Kernel message: [ 0.321722] ACPI Error: Needed type +klog [Reference], found [Device] ffff88007552b900 (20100428 +klog /exresop-104) klog -klog ADVICE: An ACPI Method has returned an Device type when a -klog Reference type was expected. +klog ADVICE: An ACPI object type did not match the expected +klog type. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 0.321740] ACPI Error (psparse-0537): Method @@ -6409,12 +6413,13 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel -klog message: [ 0.331637] ACPI Error: Needed type [Reference], -klog found [Device] ffff88014b82d820 (20090903/exresop-104) +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH +klog Kernel message: [ 0.331637] ACPI Error: Needed type +klog [Reference], found [Device] ffff88014b82d820 (20090903 +klog /exresop-104) klog -klog ADVICE: An ACPI Method has returned an Device type when a -klog Reference type was expected. +klog ADVICE: An ACPI object type did not match the expected +klog type. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 0.331653] ACPI Error (psparse-0537): Method @@ -6425,12 +6430,13 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel -klog message: [ 0.331820] ACPI Error: Needed type [Reference], -klog found [Device] ffff8800379aa900 (20100428/exresop-104) +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH +klog Kernel message: [ 0.331820] ACPI Error: Needed type +klog [Reference], found [Device] ffff8800379aa900 (20100428 +klog /exresop-104) klog -klog ADVICE: An ACPI Method has returned an Device type when a -klog Reference type was expected. +klog ADVICE: An ACPI object type did not match the expected +klog type. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 0.331838] ACPI Error (psparse-0537): Method @@ -7058,12 +7064,13 @@ klog while executing ACPI AML. The error lists the ACPI driver klog module and the line number where the bug has been caught klog and the method that caused the error. klog -klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel -klog message: [ 0.353652] ACPI Error: Needed type [Reference], -klog found [Device] ffff8800379a6800 (20090903/exresop-104) +klog FAILED [HIGH] KlogAcpiCheckObjectTypeFailed: Test 1, HIGH +klog Kernel message: [ 0.353652] ACPI Error: Needed type +klog [Reference], found [Device] ffff8800379a6800 (20090903 +klog /exresop-104) klog -klog ADVICE: An ACPI Method has returned an Device type when a -klog Reference type was expected. +klog ADVICE: An ACPI object type did not match the expected +klog type. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 0.353652] ACPI Error (psparse-0537): Method @@ -7083,15 +7090,15 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel -klog message: [ 0.355798] ACPI Error: ACPI path has too many -klog parent prefixes (^) - reached beyond root node (20090903 -klog /nsaccess-429) +klog FAILED [HIGH] KlogAcpiPathTooManyParentPrefixes: Test 1, +klog HIGH Kernel message: [ 0.355798] ACPI Error: ACPI path has +klog too many parent prefixes (^) - reached beyond root node +klog (20090903/nsaccess-429) klog -klog ADVICE: The kernel has most probably detected an error -klog while executing ACPI AML. The error lists the ACPI driver -klog module and the line number where the bug has been caught -klog and the method that caused the error. +klog ADVICE: An ACPI path has too many parent prefixes and has +klog fallen outside the root node. This is a bug in the +klog firmware. The Name Space lookup on the ACPI path cannot be +klog found. klog klog FAILED [HIGH] KlogBiosTimerNotConnectedtoIoApic: Test 1, klog HIGH Kernel message: [ 0.356001] ..MP-BIOS bug: 8254 timer @@ -7212,15 +7219,15 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel -klog message: [ 0.361596] ACPI Error: ACPI path has too many -klog parent prefixes (^) - reached beyond root node (20100428 -klog /nsaccess-429) +klog FAILED [HIGH] KlogAcpiPathTooManyParentPrefixes: Test 1, +klog HIGH Kernel message: [ 0.361596] ACPI Error: ACPI path has +klog too many parent prefixes (^) - reached beyond root node +klog (20100428/nsaccess-429) klog -klog ADVICE: The kernel has most probably detected an error -klog while executing ACPI AML. The error lists the ACPI driver -klog module and the line number where the bug has been caught -klog and the method that caused the error. +klog ADVICE: An ACPI path has too many parent prefixes and has +klog fallen outside the root node. This is a bug in the +klog firmware. The Name Space lookup on the ACPI path cannot be +klog found. klog klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel klog message: [ 0.362481] ACPI Error (psparse-0537): Method @@ -7711,14 +7718,14 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 0.399990] ACPI Error: Field -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) -klog (20110112/dsopcode-597) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 0.399990] ACPI Error: Field [ASSM] at +klog 524320 exceeds Buffer [BUF0] size 688 (bits) (20110112 +klog /dsopcode-597) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel klog message: [ 0.399996] ACPI Error: Method parse/execution @@ -7858,14 +7865,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 0.420241] ACPI Error: Field -klog [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) -klog (20100428/dsopcode-597) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 0.420241] ACPI Error: Field [I9MN] at +klog 544 exceeds Buffer [IORT] size 464 (bits) (20100428 +klog /dsopcode-597) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel klog message: [ 0.420248] ACPI Error (psparse-0537): Method @@ -8605,14 +8612,14 @@ klog ADVICE: The ACPI table listed above has an incorrect klog checksum, this could be a BIOS bug or due to table klog corruption. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 0.591722] ACPI Error: Field -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) -klog (20100428/dsopcode-597) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 0.591722] ACPI Error: Field [ASSM] at +klog 524320 exceeds Buffer [BUF0] size 880 (bits) (20100428 +klog /dsopcode-597) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel klog message: [ 0.591729] ACPI Error (psparse-0537): Method @@ -9477,14 +9484,14 @@ klog ADVICE: The ACPI Method was executing with a different klog number of parameters than the Method expected. This should klog be fixed. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 0.744106] ACPI Error: Field -klog [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) -klog (20090903/dsopcode-596) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 0.744106] ACPI Error: Field [ASSM] at +klog 524320 exceeds Buffer [BUF0] size 880 (bits) (20090903 +klog /dsopcode-596) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel klog message: [ 0.744114] ACPI Error (psparse-0537): Method @@ -10634,14 +10641,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiRegionHasNoHandler: Test 1, HIGH +klog FAILED [HIGH] KlogAcpiKlogRegionNoHandler: Test 1, HIGH klog Kernel message: [ 1.246164] ACPI Error: Region klog EmbeddedControl (ID=3) has no handler (20110413 klog /exfldio-292) klog -klog ADVICE: This is a bug picked up by the kernel, but as yet, -klog the firmware test suite has no diagnostic advice for this -klog particular problem. +klog ADVICE: An access (read or write) to an operation region +klog has been attempted and a region handler for this has not +klog been implemented, this may need to be implemented to +klog provide the expected behaviour. See +klog acpi_ex_access_region(). klog klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH klog Kernel message: [ 1.246169] ACPI Error: Method parse @@ -10785,14 +10794,14 @@ klog some AML because a object or control did not exist. This klog normally occurs because of buggy firmware and may lead to klog unexpected behaviour or loss of functionality. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 1.371174] ACPI Error: Field -klog [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) -klog (20090903/dsopcode-596) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 1.371174] ACPI Error: Field [CDW3] at 96 +klog exceeds Buffer [NULL] size 64 (bits) (20090903 +klog /dsopcode-596) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1, klog CRITICAL Kernel message: [ 1.371180] ACPI Error @@ -10822,13 +10831,14 @@ klog ADVICE: The kernel has detected an error trying to execute klog an Method and it cannot find an object. This is indicates klog a bug in the DSDT or SSDT AML code. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 1.384655] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff8801393f91f8 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 1.384655] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff8801393f91f8 klog (20090903/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 1.384672] ACPI Error (psparse-0537): Method @@ -11196,13 +11206,14 @@ klog some AML because a object or control did not exist. This klog normally occurs because of buggy firmware and may lead to klog unexpected behaviour or loss of functionality. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 1.678325] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88022f7bb5e8 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 1.678325] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88022f7bb5e8 klog (20110112/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 1.678342] ACPI Error: Method parse/execution @@ -11213,13 +11224,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 1.678390] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88022f7bb8b8 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 1.678390] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88022f7bb8b8 klog (20110112/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 1.678412] ACPI Error: Method parse/execution @@ -12177,14 +12189,13 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel -klog message: [ 2.334361] ACPI Error: Attempt to CreateField of -klog length zero (20110112/dsopcode-529) +klog FAILED [HIGH] KlogAcpiZeroLengthCreateField: Test 1, HIGH +klog Kernel message: [ 2.334361] ACPI Error: Attempt to +klog CreateField of length zero (20110112/dsopcode-529) klog -klog ADVICE: The kernel has most probably detected an error -klog while executing ACPI AML. The error lists the ACPI driver -klog module and the line number where the bug has been caught -klog and the method that caused the error. +klog ADVICE: Failed to initialise an ACPI buffer field, +klog CreateField used with a zero field length which is +klog illegal. This is a firmware bug. klog klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH klog Kernel message: [ 2.334370] ACPI Error: Method parse @@ -12517,14 +12528,14 @@ klog klog ADVICE: The ACPI Method returned an incorrect type, this klog should be fixed. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 2.949708] ACPI Error: Field -klog [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) -klog (20110112/dsopcode-597) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 2.949708] ACPI Error: Field [CDW3] at 96 +klog exceeds Buffer [NULL] size 64 (bits) (20110112 +klog /dsopcode-597) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [CRITICAL] KlogAcpiSbOscAeAmlBufferLimit: Test 1, klog CRITICAL Kernel message: [ 2.949716] ACPI Error: Method @@ -13350,13 +13361,14 @@ klog klog ADVICE: Could not set the brightness level, the ACPI klog control _BCM failed to execute correctly. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 9.393479] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88012d8cfee8 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 9.393479] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88012d8cfee8 klog (20110112/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 9.393498] ACPI Error: Method parse/execution @@ -13376,13 +13388,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 9.394098] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88012d8cfd38 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 9.394098] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88012d8cfd38 klog (20110112/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 9.394109] ACPI Error: Method parse/execution @@ -13447,13 +13460,14 @@ klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's klog been omitted. This can cause display switching issues. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 10.120967] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88023bcba438 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 10.120967] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88023bcba438 klog (20110112/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 10.120977] ACPI Error: Method parse/execution @@ -13464,13 +13478,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 10.121007] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88023bcba1b0 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 10.121007] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88023bcba1b0 klog (20110112/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 10.121018] ACPI Error: Method parse/execution @@ -13860,21 +13875,23 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 11.880473] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88012125f558 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 11.880473] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88012125f558 klog (20110413/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 11.880998] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88012125f3a8 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 11.880998] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88012125f3a8 klog (20110413/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH klog Kernel message: [ 11.915871] ACPI Error (psparse-0537): @@ -13944,13 +13961,14 @@ klog ADVICE: The ACPI driver encountered an error executing klog some ACPI AML code which originated from a device timing klog out. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 12.167076] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff8800b1753048 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 12.167076] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff8800b1753048 klog (20090903/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 12.167089] ACPI Error (psparse-0537): Method @@ -13977,13 +13995,14 @@ klog klog ADVICE: Executing the ACPI Method leaded in an execution klog failure. This needs investigating. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 12.242368] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88012ea6e6c0 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 12.242368] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88012ea6e6c0 klog (20110413/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 12.242387] ACPI Error: Method parse/execution @@ -14010,13 +14029,14 @@ klog klog ADVICE: Executing the ACPI Method leaded in an execution klog failure. This needs investigating. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 12.242974] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88012ea6e5e8 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 12.242974] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88012ea6e5e8 klog (20110413/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 12.242986] ACPI Error: Method parse/execution @@ -14127,14 +14147,14 @@ klog ADVICE: The ACPI driver encountered an error executing klog some ACPI AML code which originated from a device timing klog out. klog -klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1, -klog CRITICAL Kernel message: [ 13.445954] ACPI Error: Field -klog [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) -klog (20110112/dsopcode-597) +klog FAILED [HIGH] KlogAcpiFieldExceedsBuffer: Test 1, HIGH +klog Kernel message: [ 13.445954] ACPI Error: Field [D128] at +klog 1040 exceeds Buffer [NULL] size 160 (bits) (20110112 +klog /dsopcode-597) klog -klog ADVICE: The field exceeds the allocated buffer size. This -klog can lead to unexpected results when fetching data outside -klog this region. +klog ADVICE: Failed to initialise an ACPI buffer field, the +klog field exceeded the buffer size provided. This is a +klog firmware bug. klog klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel klog message: [ 13.445980] ACPI Error: Method parse/execution @@ -14233,13 +14253,14 @@ klog klog ADVICE: Executing the ACPI Method leaded in an execution klog failure. This needs investigating. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 14.885219] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88013c6b58b8 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 14.885219] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88013c6b58b8 klog (20110112/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 14.885234] ACPI Error: Method parse/execution @@ -14250,13 +14271,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 14.885277] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88013c6b5828 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 14.885277] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88013c6b5828 klog (20110112/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 14.885289] ACPI Error: Method parse/execution @@ -14410,13 +14432,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 17.125601] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] eee27810 -klog (20110112/exresop-590) +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 17.125601] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] eee27810 (20110112 +klog /exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 17.125618] ACPI Error: Method parse/execution @@ -14427,13 +14450,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 17.125669] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] eee27780 -klog (20110112/exresop-590) +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 17.125669] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] eee27780 (20110112 +klog /exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 17.125690] ACPI Error: Method parse/execution @@ -14513,13 +14537,14 @@ klog /GenericSerialBus write failed because the buffer was too klog small, e) An index into a buffer was too long and fell klog outside the buffer. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 18.054842] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff880133a777e0 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 18.054842] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff880133a777e0 klog (20110112/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 18.054860] ACPI Error: Method parse/execution @@ -14530,13 +14555,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 18.054909] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff880133a776c0 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 18.054909] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff880133a776c0 klog (20110112/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 18.054932] ACPI Error: Method parse/execution @@ -14660,13 +14686,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 20.135790] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88023b491318 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 20.135790] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88023b491318 klog (20110316/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 20.135804] ACPI Error: Method parse/execution @@ -14677,13 +14704,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 20.135849] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff88023b491708 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 20.135849] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff88023b491708 klog (20110316/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 20.135864] ACPI Error: Method parse/execution @@ -14694,14 +14722,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel -klog message: [ 20.149010] ACPI Error: Needed [Integer/String -klog /Buffer], found [Package] f741ed48 (20100428/exresop-422) +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 20.149010] ACPI Error: Needed [Integer +klog /String/Buffer], found [Package] f741ed48 (20100428 +klog /exresop-422) klog -klog ADVICE: The kernel has most probably detected an error -klog while executing ACPI AML. The error lists the ACPI driver -klog module and the line number where the bug has been caught -klog and the method that caused the error. +klog ADVICE: An error occurred in resolving operands, required +klog an Integer, String or Buffer type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 20.149032] ACPI Error (psparse-0537): Method @@ -14762,13 +14790,14 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet, klog the firmware test suite has no diagnostic advice for this klog particular problem. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 21.562484] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] f7260370 -klog (20090903/exresop-590) +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 21.562484] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] f7260370 (20090903 +klog /exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 21.562496] ACPI Error (psparse-0537): Method @@ -14852,13 +14881,14 @@ klog to display adapter) is defined but we should also have klog _DOS (Enable/Disable output switching) defined but it's klog been omitted. This can cause display switching issues. klog -klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test -klog 1, HIGH Kernel message: [ 25.859931] ACPI Error: Needed -klog [Buffer/String/Package], found [Integer] ffff880139af5240 +klog FAILED [HIGH] KlogAcpiResolveOpBadType: Test 1, HIGH +klog Kernel message: [ 25.859931] ACPI Error: Needed [Buffer +klog /String/Package], found [Integer] ffff880139af5240 klog (20090903/exresop-590) klog -klog ADVICE: An ACPI Method has returned an Integer type when a -klog Buffer, String or Package was expected. +klog ADVICE: An error occurred in resolving operands, required +klog a Buffer, String or Package type, got a different type +klog instead. klog klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel klog message: [ 25.859949] ACPI Error (psparse-0537): Method diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log index 6fe05cd..445cc44 100644 --- a/klog-0001/klog-0002.log +++ b/klog-0001/klog-0002.log @@ -5,7 +5,7 @@ summary summary Test Failure Summary summary ========================================================== summary -summary Critical failures: 34 +summary Critical failures: 23 summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219) summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20100428/tbxfroot-219) summary klog: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid RSDP was not found (20110112/tbxfroot-219) @@ -23,25 +23,14 @@ summary klog: CRITICAL Kernel message: [ 0.042302] ACPI Warning: Detect summary klog: CRITICAL Kernel message: [ 0.042311] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x007F (20090903/psloop-522) summary klog: CRITICAL Kernel message: [ 0.042322] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x0080 (20090903/psloop-522) summary klog: CRITICAL Kernel message: [ 0.044066] ACPI Warning: Detected an unsupported executable opcode at module-level: [0x0070] at table offset 0x678F (20100428/psloop-526) -summary klog: CRITICAL Kernel message: [ 0.101941] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20110112/dsopcode-597) -summary klog: CRITICAL Kernel message: [ 0.136585] ACPI Error: Field [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) (20090903/dsopcode-596) -summary klog: CRITICAL Kernel message: [ 0.222980] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20090903/dsopcode-596) -summary klog: CRITICAL Kernel message: [ 0.224987] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20100428/dsopcode-597) summary klog: CRITICAL Kernel message: [ 0.296054] [Firmware Bug]: Invalid critical threshold (0) -summary klog: CRITICAL Kernel message: [ 0.399990] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20110112/dsopcode-597) -summary klog: CRITICAL Kernel message: [ 0.420241] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20100428/dsopcode-597) -summary klog: CRITICAL Kernel message: [ 0.591722] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20100428/dsopcode-597) -summary klog: CRITICAL Kernel message: [ 0.744106] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20090903/dsopcode-596) summary klog: CRITICAL Kernel message: [ 0.788418] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88030a048b40), AE_AML_BUFFER_LIMIT summary klog: CRITICAL Kernel message: [ 1.125427] [Firmware Bug]: No valid trip found summary klog: CRITICAL Kernel message: [ 1.336148] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88012b647200), AE_AML_BUFFER_LIMIT -summary klog: CRITICAL Kernel message: [ 1.371174] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) summary klog: CRITICAL Kernel message: [ 1.371180] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88044b85e4a0), AE_AML_BUFFER_LIMIT -summary klog: CRITICAL Kernel message: [ 2.949708] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110112/dsopcode-597) summary klog: CRITICAL Kernel message: [ 2.949716] ACPI Error: Method parse/execution failed [_SB_._OSC] (Node ffff880297016ca8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) -summary klog: CRITICAL Kernel message: [ 13.445954] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) summary -summary High failures: 1223 +summary High failures: 1234 summary klog: HIGH Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0 summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008018/0000000000008028, using 32 (20090903/tbfadt-427) summary klog: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X address mismatch in Gpe0Block: 00008020/0000000000008028, using 32 (20090903/tbfadt-427) @@ -300,6 +289,7 @@ summary klog: HIGH Kernel message: [ 0.096257] ACPI Error: Could not ma summary klog: HIGH Kernel message: [ 0.096273] ACPI Error: Method parse/execution failed [_PR_.CPU1.APCT] (Node f383e480), AE_NO_MEMORY (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.096285] ACPI Error: Method parse/execution failed [_PR_.CPU2.GCAP] (Node f383e4e0), AE_NO_MEMORY (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.096295] ACPI Error: Method parse/execution failed [_PR_.CPU2._PDC] (Node f383e4b0), AE_NO_MEMORY (20110112/psparse-536) +summary klog: HIGH Kernel message: [ 0.101941] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20110112/dsopcode-597) summary klog: HIGH Kernel message: [ 0.101946] ACPI Error: Method parse/execution failed [_SB_.MEM_._CRS] (Node f442af60), AE_AML_BUFFER_LIMIT (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.101953] ACPI Error: Method execution failed [_SB_.MEM_._CRS] (Node f442af60), AE_AML_BUFFER_LIMIT (20110112/uteval-103) summary klog: HIGH Kernel message: [ 0.104297] ACPI Error (psargs-0359): [OSYS] Namespace lookup failure, AE_NOT_FOUND @@ -317,6 +307,7 @@ summary klog: HIGH Kernel message: [ 0.120765] ACPI Warning for _SB_.PC summary klog: HIGH Kernel message: [ 0.122347] ACPI Error: Could not map memory at 0x00000000000FFA32, size 0 (20100428/exregion-178) summary klog: HIGH Kernel message: [ 0.122369] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.CPU0._PDC] (Node f70191c8), AE_NO_MEMORY summary klog: HIGH Kernel message: [ 0.128150] ACPI Warning for _SB_.PCI0.P32_._PRT: Return Package has no elements (empty) (20090903/nspredef-433) +summary klog: HIGH Kernel message: [ 0.136585] ACPI Error: Field [ALB2] at 120 exceeds Buffer [CRSA] size 104 (bits) (20090903/dsopcode-596) summary klog: HIGH Kernel message: [ 0.136600] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node dd8159d8), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.136637] ACPI Error (uteval-0250): Method execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node dd8159d8), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.140000] [Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 186 is 43003c) @@ -431,10 +422,12 @@ summary klog: HIGH Kernel message: [ 0.220252] ACPI Error (uteval-0250) summary klog: HIGH Kernel message: [ 0.221153] ACPI Error: Method parse/execution failed [_SB_.PCI0.HPET._CRS] (Node f402ae70), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.221220] ACPI Error: Method parse/execution failed [_SB_.PCI0.RTC_._CRS] (Node f402aee8), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.222211] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f701beb8), AE_ALREADY_EXISTS +summary klog: HIGH Kernel message: [ 0.222980] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20090903/dsopcode-596) summary klog: HIGH Kernel message: [ 0.222987] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node f7015900), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.223020] ACPI Error (uteval-0250): Method execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node f7015900), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.224289] ACPI Warning for _SB_.PCI0.P32_._PRT: Return Package has no elements (empty) (20100428/nspredef-456) summary klog: HIGH Kernel message: [ 0.224569] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node f701fca8), AE_ALREADY_EXISTS +summary klog: HIGH Kernel message: [ 0.224987] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20100428/dsopcode-597) summary klog: HIGH Kernel message: [ 0.224994] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.MEM_._CRS] (Node f7021990), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.225018] ACPI Error (uteval-0250): Method execution failed [_SB_.MEM_._CRS] (Node f7021990), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.228032] ACPI Error (psargs-0359): [_PR_.C002._PPC] Namespace lookup failure, AE_NOT_FOUND @@ -622,6 +615,7 @@ summary klog: HIGH Kernel message: [ 0.390341] ACPI Error: [GUR_._BAS] summary klog: HIGH Kernel message: [ 0.390354] ACPI Error: Method parse/execution failed [_SB_.PCI0.MBIO._CRS] (Node ffff880078f30aa0), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.393086] ACPI Warning: For _TZ_.THRM._PSL: Return Package has no elements (empty) (20110413/nspredef-456) summary klog: HIGH Kernel message: [ 0.395834] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0._OSC] (Node ffff88013ba393a0), AE_NOT_FOUND +summary klog: HIGH Kernel message: [ 0.399990] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 688 (bits) (20110112/dsopcode-597) summary klog: HIGH Kernel message: [ 0.399996] ACPI Error: Method parse/execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000), AE_AML_BUFFER_LIMIT (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.400012] ACPI Error: Method execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000), AE_AML_BUFFER_LIMIT (20110112/uteval-103) summary klog: HIGH Kernel message: [ 0.406016] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.ADP0.ADJP] (Node ffff88013ba3c5a0), AE_NOT_FOUND @@ -630,6 +624,7 @@ summary klog: HIGH Kernel message: [ 0.408529] ACPI Error: Method parse summary klog: HIGH Kernel message: [ 0.415975] ACPI Warning for _TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012) summary klog: HIGH Kernel message: [ 0.420210] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110413/dsfield-143) summary klog: HIGH Kernel message: [ 0.420218] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node ffff88022b749b18), AE_ALREADY_EXISTS (20110413/psparse-536) +summary klog: HIGH Kernel message: [ 0.420241] ACPI Error: Field [I9MN] at 544 exceeds Buffer [IORT] size 464 (bits) (20100428/dsopcode-597) summary klog: HIGH Kernel message: [ 0.420248] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff88013142fac0), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.420284] ACPI Error (uteval-0250): Method execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node ffff88013142fac0), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.422032] ACPI Warning (dsobject-0501): Package List length (6) larger than NumElements count (3), truncated @@ -686,6 +681,7 @@ summary klog: HIGH Kernel message: [ 0.541277] ACPI Error: Method parse summary klog: HIGH Kernel message: [ 0.563415] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node ffff88003d9af848), AE_ALREADY_EXISTS (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.566332] ACPI Warning: For _TZ_.THRM._AL0: Return Package has no elements (empty) (20110413/nspredef-456) summary klog: HIGH Kernel message: [ 0.583718] ACPI Warning: _SB_.PCI0.PCI2._PRT: Return Package has no elements (empty) 20090521 nspredef-434 +summary klog: HIGH Kernel message: [ 0.591722] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20100428/dsopcode-597) summary klog: HIGH Kernel message: [ 0.591729] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.MEM_._CRS] (Node ffff8800b4040f60), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.591760] ACPI Error (uteval-0250): Method execution failed [_SB_.MEM_._CRS] (Node ffff8800b4040f60), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.593045] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.PPCE] (Node f702c7b0), AE_NOT_FOUND @@ -745,6 +741,7 @@ summary klog: HIGH Kernel message: [ 0.743273] ACPI Error (psparse-0537 summary klog: HIGH Kernel message: [ 0.743525] ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20110112/dsfield-143) summary klog: HIGH Kernel message: [ 0.743530] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node f50273d8), AE_ALREADY_EXISTS (20110112/psparse-536) summary klog: HIGH Kernel message: [ 0.743538] ACPI Warning: For _SB_.PCI0._OSC: Parameter count mismatch - ASL declared 5, ACPI requires 4 (20110112/nspredef-352) +summary klog: HIGH Kernel message: [ 0.744106] ACPI Error: Field [ASSM] at 524320 exceeds Buffer [BUF0] size 880 (bits) (20090903/dsopcode-596) summary klog: HIGH Kernel message: [ 0.744114] ACPI Error (psparse-0537): Method parse/execution failed [_SB_.MEM_._CRS] (Node ffff88013ba44cc0), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.744142] ACPI Error (uteval-0250): Method execution failed [_SB_.MEM_._CRS] (Node ffff88013ba44cc0), AE_AML_BUFFER_LIMIT summary klog: HIGH Kernel message: [ 0.772223] ACPI Error: Method parse/execution failed [_SB_.PCI0._OSC] (Node f4c250d8), AE_ALREADY_EXISTS (20101013/psparse-537) @@ -851,6 +848,7 @@ summary klog: HIGH Kernel message: [ 1.280965] ACPI Error (psparse-0537 summary klog: HIGH Kernel message: [ 1.314561] ACPI Error: [ECPU] Namespace lookup failure, AE_NOT_FOUND (20110112/psargs-359) summary klog: HIGH Kernel message: [ 1.314567] ACPI Error: Method parse/execution failed [_TZ_.TZ00._TMP] (Node ffff88011763ca28), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 1.337975] ACPI Error (uteval-0250): Method execution failed [J380._STA] (Node ffff88013712b380), AE_NOT_EXIST +summary klog: HIGH Kernel message: [ 1.371174] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20090903/dsopcode-596) summary klog: HIGH Kernel message: [ 1.381411] ACPI Error (psparse-0537): Method parse/execution failed [] (Node ffffffff81a2b040), AE_NOT_FOUND summary klog: HIGH Kernel message: [ 1.381481] ACPI Error (dswload-0659): [PCI0] Namespace lookup failure, AE_NOT_FOUND summary klog: HIGH Kernel message: [ 1.384655] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801393f91f8 (20090903/exresop-590) @@ -1027,6 +1025,7 @@ summary klog: HIGH Kernel message: [ 2.861808] ACPI Error: [_SB_.PCI0.G summary klog: HIGH Kernel message: [ 2.861812] ACPI Error: Method parse/execution failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node ffff88015746e168), AE_NOT_FOUND (20110112/psparse-536) summary klog: HIGH Kernel message: [ 2.870589] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node ffff880137632c80), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) summary klog: HIGH Kernel message: [ 2.906610] ACPI Warning: For _SB_.PCI0.P0P2.PEGP._DOD: Return type mismatch - found Integer, expected Package (20110413/nspredef-1053) +summary klog: HIGH Kernel message: [ 2.949708] ACPI Error: Field [CDW3] at 96 exceeds Buffer [NULL] size 64 (bits) (20110112/dsopcode-597) summary klog: HIGH Kernel message: [ 3.005123] ACPI Error (psparse-0537): Method parse/execution failed [_SB_._OSC] (Node ffff88122fc1ea00), AE_NOT_FOUND summary klog: HIGH Kernel message: [ 3.112435] ACPI Error (psparse-0537): Method parse/execution failed [_PR_.PPCE] (Node f74257c8), AE_NOT_FOUND summary klog: HIGH Kernel message: [ 3.112465] ACPI Error (psparse-0537): Method parse/execution failed [EV4_] (Node f742c210), AE_NOT_FOUND @@ -1175,6 +1174,7 @@ summary klog: HIGH Kernel message: [ 12.838979] cfg80211: Ignoring regu summary klog: HIGH Kernel message: [ 12.841008] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain ACPI Warning: _BQC returned an invalid level (20110112/video-473) summary klog: HIGH Kernel message: [ 13.024512] ACPI Error: Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node f7425450), AE_AML_PACKAGE_LIMIT (20110112/psparse-536) summary klog: HIGH Kernel message: [ 13.396787] ACPI Error: Method parse/execution failed [_SB_.ADP1._PSR] (Node ffff88011763ba00), AE_TIME (20110112/psparse-536) +summary klog: HIGH Kernel message: [ 13.445954] ACPI Error: Field [D128] at 1040 exceeds Buffer [NULL] size 160 (bits) (20110112/dsopcode-597) summary klog: HIGH Kernel message: [ 13.445980] ACPI Error: Method parse/execution failed [_SB_.WMID.HWMC] (Node f742a8b8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) summary klog: HIGH Kernel message: [ 13.446019] ACPI Error: Method parse/execution failed [_SB_.WMID.WMAD] (Node f742aac8), AE_AML_BUFFER_LIMIT (20110112/psparse-536) summary klog: HIGH Kernel message: [ 13.452167] ACPI Error (psargs-0359): [_PR_.C001] Namespace lookup failure, AE_NOT_FOUND