@@ -149,8 +149,8 @@ static int nfcwilink_get_bts_file_name(struct nfcwilink *drv, char *file_name)
skb = nfcwilink_skb_alloc(sizeof(struct nci_vs_nfcc_info_cmd),
GFP_KERNEL);
if (!skb) {
- nfc_dev_err(&drv->pdev->dev,
- "no memory for nci_vs_nfcc_info_cmd");
+ nfc_err(&drv->pdev->dev,
+ "no memory for nci_vs_nfcc_info_cmd\n");
return -ENOMEM;
}
@@ -182,8 +182,7 @@ static int nfcwilink_get_bts_file_name(struct nfcwilink *drv, char *file_name)
drv->nfcc_info.plen, drv->nfcc_info.status);
if ((drv->nfcc_info.plen != 5) || (drv->nfcc_info.status != 0)) {
- nfc_dev_err(&drv->pdev->dev,
- "invalid nci_vs_nfcc_info_rsp");
+ nfc_err(&drv->pdev->dev, "invalid nci_vs_nfcc_info_rsp\n");
return -EINVAL;
}
@@ -194,7 +193,7 @@ static int nfcwilink_get_bts_file_name(struct nfcwilink *drv, char *file_name)
drv->nfcc_info.sw_ver_z,
drv->nfcc_info.patch_id);
- nfc_dev_info(&drv->pdev->dev, "nfcwilink FW file name: %s", file_name);
+ nfc_info(&drv->pdev->dev, "nfcwilink FW file name: %s\n", file_name);
return 0;
}
@@ -211,8 +210,8 @@ static int nfcwilink_send_bts_cmd(struct nfcwilink *drv, __u8 *data, int len)
(len > BTS_FILE_CMD_MAX_LEN) ||
(hdr->chnl != NFCWILINK_CHNL) ||
(hdr->opcode != NFCWILINK_OPCODE)) {
- nfc_dev_err(&drv->pdev->dev,
- "ignoring invalid bts cmd, len %d, chnl %d, opcode %d",
+ nfc_err(&drv->pdev->dev,
+ "ignoring invalid bts cmd, len %d, chnl %d, opcode %d\n",
len, hdr->chnl, hdr->opcode);
return 0;
}
@@ -223,7 +222,7 @@ static int nfcwilink_send_bts_cmd(struct nfcwilink *drv, __u8 *data, int len)
skb = nfcwilink_skb_alloc(len, GFP_KERNEL);
if (!skb) {
- nfc_dev_err(&drv->pdev->dev, "no memory for bts cmd");
+ nfc_err(&drv->pdev->dev, "no memory for bts cmd\n");
return -ENOMEM;
}
@@ -240,8 +239,8 @@ static int nfcwilink_send_bts_cmd(struct nfcwilink *drv, __u8 *data, int len)
dev_dbg(&drv->pdev->dev, "wait_for_completion_timeout returned %ld\n",
comp_ret);
if (comp_ret == 0) {
- nfc_dev_err(&drv->pdev->dev,
- "timeout on wait_for_completion_timeout");
+ nfc_err(&drv->pdev->dev,
+ "timeout on wait_for_completion_timeout\n");
return -ETIMEDOUT;
}
@@ -264,7 +263,7 @@ static int nfcwilink_download_fw(struct nfcwilink *drv)
rc = request_firmware(&fw, file_name, &drv->pdev->dev);
if (rc) {
- nfc_dev_err(&drv->pdev->dev, "request_firmware failed %d", rc);
+ nfc_err(&drv->pdev->dev, "request_firmware failed %d\n", rc);
/* if the file is not found, don't exit with failure */
if (rc == -ENOENT)
@@ -284,7 +283,7 @@ static int nfcwilink_download_fw(struct nfcwilink *drv)
if (__le32_to_cpu(((struct bts_file_hdr *)ptr)->magic) !=
BTS_FILE_HDR_MAGIC) {
- nfc_dev_err(&drv->pdev->dev, "wrong bts magic number");
+ nfc_err(&drv->pdev->dev, "wrong bts magic number\n");
rc = -EINVAL;
goto release_fw;
}
@@ -367,7 +366,7 @@ static long nfcwilink_receive(void *priv_data, struct sk_buff *skb)
/* Forward skb to NCI core layer */
rc = nci_recv_frame(skb);
if (rc < 0) {
- nfc_dev_err(&drv->pdev->dev, "nci_recv_frame failed %d", rc);
+ nfc_err(&drv->pdev->dev, "nci_recv_frame failed %d\n", rc);
return rc;
}
@@ -420,13 +419,12 @@ static int nfcwilink_open(struct nci_dev *ndev)
goto clear_exit;
} else if (drv->st_register_cb_status != 0) {
rc = drv->st_register_cb_status;
- nfc_dev_err(&drv->pdev->dev,
- "st_register_cb failed %d", rc);
+ nfc_err(&drv->pdev->dev,
+ "st_register_cb failed %d\n", rc);
goto clear_exit;
}
} else {
- nfc_dev_err(&drv->pdev->dev,
- "st_register failed %d", rc);
+ nfc_err(&drv->pdev->dev, "st_register failed %d\n", rc);
goto clear_exit;
}
}
@@ -436,8 +434,8 @@ static int nfcwilink_open(struct nci_dev *ndev)
drv->st_write = nfcwilink_proto.write;
if (nfcwilink_download_fw(drv)) {
- nfc_dev_err(&drv->pdev->dev, "nfcwilink_download_fw failed %d",
- rc);
+ nfc_err(&drv->pdev->dev, "nfcwilink_download_fw failed %d\n",
+ rc);
/* open should succeed, even if the FW download failed */
}
@@ -460,7 +458,7 @@ static int nfcwilink_close(struct nci_dev *ndev)
rc = st_unregister(&nfcwilink_proto);
if (rc)
- nfc_dev_err(&drv->pdev->dev, "st_unregister failed %d", rc);
+ nfc_err(&drv->pdev->dev, "st_unregister failed %d\n", rc);
drv->st_write = NULL;
@@ -492,7 +490,7 @@ static int nfcwilink_send(struct sk_buff *skb)
len = drv->st_write(skb);
if (len < 0) {
kfree_skb(skb);
- nfc_dev_err(&drv->pdev->dev, "st_write failed %ld", len);
+ nfc_err(&drv->pdev->dev, "st_write failed %ld\n", len);
return -EFAULT;
}
@@ -531,7 +529,7 @@ static int nfcwilink_probe(struct platform_device *pdev)
NFCWILINK_HDR_LEN,
0);
if (!drv->ndev) {
- nfc_dev_err(&pdev->dev, "nci_allocate_device failed");
+ nfc_err(&pdev->dev, "nci_allocate_device failed\n");
rc = -ENOMEM;
goto exit;
}
@@ -541,7 +539,7 @@ static int nfcwilink_probe(struct platform_device *pdev)
rc = nci_register_device(drv->ndev);
if (rc < 0) {
- nfc_dev_err(&pdev->dev, "nci_register_device failed %d", rc);
+ nfc_err(&pdev->dev, "nci_register_device failed %d\n", rc);
goto free_dev_exit;
}
@@ -534,8 +534,8 @@ static void pn533_recv_response(struct urb *urb)
goto sched_wq;
case -ESHUTDOWN:
default:
- nfc_dev_err(&dev->interface->dev,
- "Urb failure (status %d)", urb->status);
+ nfc_err(&dev->interface->dev, "Urb failure (status %d)\n",
+ urb->status);
dev->wq_in_error = urb->status;
goto sched_wq;
}
@@ -547,14 +547,14 @@ static void pn533_recv_response(struct urb *urb)
in_frame, dev->ops->rx_frame_size(in_frame), false);
if (!dev->ops->rx_is_frame_valid(in_frame)) {
- nfc_dev_err(&dev->interface->dev, "Received an invalid frame");
+ nfc_err(&dev->interface->dev, "Received an invalid frame\n");
dev->wq_in_error = -EIO;
goto sched_wq;
}
if (!pn533_rx_frame_is_cmd_response(dev, in_frame)) {
- nfc_dev_err(&dev->interface->dev,
- "It it not the response to the last command");
+ nfc_err(&dev->interface->dev,
+ "It it not the response to the last command\n");
dev->wq_in_error = -EIO;
goto sched_wq;
}
@@ -590,8 +590,8 @@ static void pn533_recv_ack(struct urb *urb)
goto sched_wq;
case -ESHUTDOWN:
default:
- nfc_dev_err(&dev->interface->dev,
- "Urb failure (status %d)", urb->status);
+ nfc_err(&dev->interface->dev, "Urb failure (status %d)\n",
+ urb->status);
dev->wq_in_error = urb->status;
goto sched_wq;
}
@@ -599,15 +599,15 @@ static void pn533_recv_ack(struct urb *urb)
in_frame = dev->in_urb->transfer_buffer;
if (!pn533_rx_frame_is_ack(in_frame)) {
- nfc_dev_err(&dev->interface->dev, "Received an invalid ack");
+ nfc_err(&dev->interface->dev, "Received an invalid ack\n");
dev->wq_in_error = -EIO;
goto sched_wq;
}
rc = pn533_submit_urb_for_response(dev, GFP_ATOMIC);
if (rc) {
- nfc_dev_err(&dev->interface->dev,
- "usb_submit_urb failed with result %d", rc);
+ nfc_err(&dev->interface->dev,
+ "usb_submit_urb failed with result %d\n", rc);
dev->wq_in_error = rc;
goto sched_wq;
}
@@ -975,8 +975,8 @@ static void pn533_send_complete(struct urb *urb)
break;
case -ESHUTDOWN:
default:
- nfc_dev_err(&dev->interface->dev,
- "Urb failure (status %d)", urb->status);
+ nfc_err(&dev->interface->dev, "Urb failure (status %d)\n",
+ urb->status);
}
}
@@ -1256,8 +1256,8 @@ static int pn533_target_found(struct pn533 *dev, u8 tg, u8 *tgdata,
rc = pn533_target_found_type_b(&nfc_tgt, tgdata, tgdata_len);
break;
default:
- nfc_dev_err(&dev->interface->dev,
- "Unknown current poll modulation");
+ nfc_err(&dev->interface->dev,
+ "Unknown current poll modulation\n");
return -EPROTO;
}
@@ -1473,8 +1473,8 @@ static int pn533_init_target_complete(struct pn533 *dev, struct sk_buff *resp)
rc = nfc_tm_activated(dev->nfc_dev, NFC_PROTO_NFC_DEP_MASK,
comm_mode, gb, gb_len);
if (rc < 0) {
- nfc_dev_err(&dev->interface->dev,
- "Error when signaling target activation");
+ nfc_err(&dev->interface->dev,
+ "Error when signaling target activation\n");
return rc;
}
@@ -1507,8 +1507,8 @@ static int pn533_poll_complete(struct pn533 *dev, void *arg,
if (IS_ERR(resp)) {
rc = PTR_ERR(resp);
- nfc_dev_err(&dev->interface->dev, "%s Poll complete error %d",
- __func__, rc);
+ nfc_err(&dev->interface->dev, "%s Poll complete error %d\n",
+ __func__, rc);
if (rc == -ENOENT) {
if (dev->poll_mod_count != 0)
@@ -1516,8 +1516,8 @@ static int pn533_poll_complete(struct pn533 *dev, void *arg,
else
goto stop_poll;
} else if (rc < 0) {
- nfc_dev_err(&dev->interface->dev,
- "Error %d when running poll", rc);
+ nfc_err(&dev->interface->dev,
+ "Error %d when running poll\n", rc);
goto stop_poll;
}
}
@@ -1543,7 +1543,7 @@ done:
return rc;
stop_poll:
- nfc_dev_err(&dev->interface->dev, "Polling operation has been stopped");
+ nfc_err(&dev->interface->dev, "Polling operation has been stopped\n");
pn533_poll_reset_mod_list(dev);
dev->poll_protocols = 0;
@@ -1585,7 +1585,7 @@ static int pn533_send_poll_frame(struct pn533 *dev)
}
if (!skb) {
- nfc_dev_err(&dev->interface->dev, "Failed to allocate skb.");
+ nfc_err(&dev->interface->dev, "Failed to allocate skb\n");
return -ENOMEM;
}
@@ -1593,7 +1593,7 @@ static int pn533_send_poll_frame(struct pn533 *dev)
NULL);
if (rc < 0) {
dev_kfree_skb(skb);
- nfc_dev_err(&dev->interface->dev, "Polling loop error %d", rc);
+ nfc_err(&dev->interface->dev, "Polling loop error %d\n", rc);
}
return rc;
@@ -1636,14 +1636,14 @@ static int pn533_start_poll(struct nfc_dev *nfc_dev,
__func__, im_protocols, tm_protocols);
if (dev->tgt_active_prot) {
- nfc_dev_err(&dev->interface->dev,
- "Cannot poll with a target already activated");
+ nfc_err(&dev->interface->dev,
+ "Cannot poll with a target already activated\n");
return -EBUSY;
}
if (dev->tgt_mode) {
- nfc_dev_err(&dev->interface->dev,
- "Cannot poll while already being activated");
+ nfc_err(&dev->interface->dev,
+ "Cannot poll while already being activated\n");
return -EBUSY;
}
@@ -1727,35 +1727,35 @@ static int pn533_activate_target(struct nfc_dev *nfc_dev,
__func__, protocol);
if (dev->poll_mod_count) {
- dev_err(&dev->interface->dev,
+ nfc_err(&dev->interface->dev,
"Cannot activate while polling\n");
return -EBUSY;
}
if (dev->tgt_active_prot) {
- nfc_dev_err(&dev->interface->dev,
- "There is already an active target");
+ nfc_err(&dev->interface->dev,
+ "There is already an active target\n");
return -EBUSY;
}
if (!dev->tgt_available_prots) {
- nfc_dev_err(&dev->interface->dev,
- "There is no available target to activate");
+ nfc_err(&dev->interface->dev,
+ "There is no available target to activate\n");
return -EINVAL;
}
if (!(dev->tgt_available_prots & (1 << protocol))) {
- nfc_dev_err(&dev->interface->dev,
- "Target doesn't support requested proto %u",
- protocol);
+ nfc_err(&dev->interface->dev,
+ "Target doesn't support requested proto %u\n",
+ protocol);
return -EINVAL;
}
if (protocol == NFC_PROTO_NFC_DEP) {
rc = pn533_activate_target_nfcdep(dev);
if (rc) {
- nfc_dev_err(&dev->interface->dev,
- "Activating target with DEP failed %d", rc);
+ nfc_err(&dev->interface->dev,
+ "Activating target with DEP failed %d\n", rc);
return rc;
}
}
@@ -1777,7 +1777,7 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev,
int rc;
if (!dev->tgt_active_prot) {
- nfc_dev_err(&dev->interface->dev, "There is no active target");
+ nfc_err(&dev->interface->dev, "There is no active target\n");
return;
}
@@ -1796,8 +1796,8 @@ static void pn533_deactivate_target(struct nfc_dev *nfc_dev,
rc = resp->data[0] & PN533_CMD_RET_MASK;
if (rc != PN533_CMD_RET_SUCCESS)
- nfc_dev_err(&dev->interface->dev,
- "Error 0x%x when releasing the target", rc);
+ nfc_err(&dev->interface->dev,
+ "Error 0x%x when releasing the target\n", rc);
dev_kfree_skb(resp);
return;
@@ -1819,8 +1819,8 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg,
if (dev->tgt_available_prots &&
!(dev->tgt_available_prots & (1 << NFC_PROTO_NFC_DEP))) {
- nfc_dev_err(&dev->interface->dev,
- "The target does not support DEP");
+ nfc_err(&dev->interface->dev,
+ "The target does not support DEP\n");
rc = -EINVAL;
goto error;
}
@@ -1829,8 +1829,8 @@ static int pn533_in_dep_link_up_complete(struct pn533 *dev, void *arg,
rc = rsp->status & PN533_CMD_RET_MASK;
if (rc != PN533_CMD_RET_SUCCESS) {
- nfc_dev_err(&dev->interface->dev,
- "Bringing DEP link up failed %d", rc);
+ nfc_err(&dev->interface->dev,
+ "Bringing DEP link up failed %d\n", rc);
goto error;
}
@@ -1891,21 +1891,21 @@ static int pn533_dep_link_up(struct nfc_dev *nfc_dev, struct nfc_target *target,
u8 passive_data[PASSIVE_DATA_LEN] = {0x00, 0xff, 0xff, 0x00, 0x3};
if (dev->poll_mod_count) {
- nfc_dev_err(&dev->interface->dev,
- "Cannot bring the DEP link up while polling");
+ nfc_err(&dev->interface->dev,
+ "Cannot bring the DEP link up while polling\n");
return -EBUSY;
}
if (dev->tgt_active_prot) {
- nfc_dev_err(&dev->interface->dev,
- "There is already an active target");
+ nfc_err(&dev->interface->dev,
+ "There is already an active target\n");
return -EBUSY;
}
baud = pn533_mod_to_baud(dev);
if (baud < 0) {
- nfc_dev_err(&dev->interface->dev,
- "Invalid curr modulation %d", dev->poll_mod_curr);
+ nfc_err(&dev->interface->dev,
+ "Invalid curr modulation %d\n", dev->poll_mod_curr);
return baud;
}
@@ -2035,9 +2035,8 @@ static int pn533_data_exchange_complete(struct pn533 *dev, void *_arg,
skb_pull(resp, sizeof(status));
if (ret != PN533_CMD_RET_SUCCESS) {
- nfc_dev_err(&dev->interface->dev,
- "PN533 reported error %d when exchanging data",
- ret);
+ nfc_err(&dev->interface->dev,
+ "PN533 reported error %d when exchanging data\n", ret);
rc = -EIO;
goto error;
}
@@ -2077,16 +2076,16 @@ static int pn533_transceive(struct nfc_dev *nfc_dev,
if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) {
/* TODO: Implement support to multi-part data exchange */
- nfc_dev_err(&dev->interface->dev,
- "Data length greater than the max allowed: %d",
- PN533_CMD_DATAEXCH_DATA_MAXLEN);
+ nfc_err(&dev->interface->dev,
+ "Data length greater than the max allowed: %d\n",
+ PN533_CMD_DATAEXCH_DATA_MAXLEN);
rc = -ENOSYS;
goto error;
}
if (!dev->tgt_active_prot) {
- nfc_dev_err(&dev->interface->dev,
- "Can't exchange data if there is no active target");
+ nfc_err(&dev->interface->dev,
+ "Can't exchange data if there is no active target\n");
rc = -EINVAL;
goto error;
}
@@ -2162,9 +2161,9 @@ static int pn533_tm_send(struct nfc_dev *nfc_dev, struct sk_buff *skb)
int rc;
if (skb->len > PN533_CMD_DATAEXCH_DATA_MAXLEN) {
- nfc_dev_err(&dev->interface->dev,
- "Data length greater than the max allowed: %d",
- PN533_CMD_DATAEXCH_DATA_MAXLEN);
+ nfc_err(&dev->interface->dev,
+ "Data length greater than the max allowed: %d\n",
+ PN533_CMD_DATAEXCH_DATA_MAXLEN);
return -ENOSYS;
}
@@ -2213,8 +2212,8 @@ static void pn533_wq_mi_recv(struct work_struct *work)
if (rc == 0) /* success */
return;
- nfc_dev_err(&dev->interface->dev,
- "Error %d when trying to perform data_exchange", rc);
+ nfc_err(&dev->interface->dev,
+ "Error %d when trying to perform data_exchange\n", rc);
dev_kfree_skb(skb);
kfree(dev->cmd_complete_arg);
@@ -2338,16 +2337,16 @@ static int pn533_setup(struct pn533 *dev)
break;
default:
- nfc_dev_err(&dev->interface->dev, "Unknown device type %d\n",
- dev->device_type);
+ nfc_err(&dev->interface->dev, "Unknown device type %d\n",
+ dev->device_type);
return -EINVAL;
}
rc = pn533_set_configuration(dev, PN533_CFGITEM_MAX_RETRIES,
(u8 *)&max_retries, sizeof(max_retries));
if (rc) {
- nfc_dev_err(&dev->interface->dev,
- "Error on setting MAX_RETRIES config");
+ nfc_err(&dev->interface->dev,
+ "Error on setting MAX_RETRIES config\n");
return rc;
}
@@ -2355,8 +2354,7 @@ static int pn533_setup(struct pn533 *dev)
rc = pn533_set_configuration(dev, PN533_CFGITEM_TIMING,
(u8 *)&timing, sizeof(timing));
if (rc) {
- nfc_dev_err(&dev->interface->dev,
- "Error on setting RF timings");
+ nfc_err(&dev->interface->dev, "Error on setting RF timings\n");
return rc;
}
@@ -2370,8 +2368,8 @@ static int pn533_setup(struct pn533 *dev)
rc = pn533_set_configuration(dev, PN533_CFGITEM_PASORI,
pasori_cfg, 3);
if (rc) {
- nfc_dev_err(&dev->interface->dev,
- "Error while settings PASORI config");
+ nfc_err(&dev->interface->dev,
+ "Error while settings PASORI config\n");
return rc;
}
@@ -2416,8 +2414,8 @@ static int pn533_probe(struct usb_interface *interface,
}
if (!in_endpoint || !out_endpoint) {
- nfc_dev_err(&interface->dev,
- "Could not find bulk-in or bulk-out endpoint");
+ nfc_err(&interface->dev,
+ "Could not find bulk-in or bulk-out endpoint\n");
rc = -ENODEV;
goto error;
}
@@ -2467,8 +2465,8 @@ static int pn533_probe(struct usb_interface *interface,
break;
default:
- nfc_dev_err(&dev->interface->dev, "Unknown device type %d\n",
- dev->device_type);
+ nfc_err(&dev->interface->dev, "Unknown device type %d\n",
+ dev->device_type);
rc = -EINVAL;
goto destroy_wq;
}
@@ -2478,9 +2476,9 @@ static int pn533_probe(struct usb_interface *interface,
if (rc < 0)
goto destroy_wq;
- nfc_dev_info(&dev->interface->dev,
- "NXP PN533 firmware ver %d.%d now attached",
- fw_ver.ver, fw_ver.rev);
+ nfc_info(&dev->interface->dev,
+ "NXP PN533 firmware ver %d.%d now attached\n",
+ fw_ver.ver, fw_ver.rev);
dev->nfc_dev = nfc_allocate_device(&pn533_nfc_ops, protocols,
@@ -2548,7 +2546,7 @@ static void pn533_disconnect(struct usb_interface *interface)
usb_free_urb(dev->out_urb);
kfree(dev);
- nfc_dev_info(&interface->dev, "NXP PN533 NFC device disconnected");
+ nfc_info(&interface->dev, "NXP PN533 NFC device disconnected\n");
}
static struct usb_driver pn533_driver = {
@@ -28,8 +28,8 @@
#include <linux/device.h>
#include <linux/skbuff.h>
-#define nfc_dev_info(dev, fmt, arg...) dev_info((dev), "NFC: " fmt "\n", ## arg)
-#define nfc_dev_err(dev, fmt, arg...) dev_err((dev), "NFC: " fmt "\n", ## arg)
+#define nfc_info(dev, fmt, ...) dev_info((dev), "NFC: " fmt, ##__VA_ARGS__)
+#define nfc_err(dev, fmt, ...) dev_err((dev), "NFC: " fmt, ##__VA_ARGS__)
struct nfc_dev;
Use a more standard kernel style macro logging name. Standardize the spacing of the "NFC: " prefix. Add \n to uses, remove from macro. Fix the defective uses that already had a \n. Signed-off-by: Joe Perches <joe@perches.com> --- drivers/nfc/nfcwilink.c | 44 +++++++------- drivers/nfc/pn533.c | 156 ++++++++++++++++++++++++------------------------ include/net/nfc/nfc.h | 4 +- 3 files changed, 100 insertions(+), 104 deletions(-)