diff mbox

[U-Boot,v10,08/30] nand: mxc: Use appropriate page number in syndrome functions

Message ID 1364969093-19504-8-git-send-email-benoit.thebaudeau@advansee.com
State Superseded
Delegated to: Albert ARIBAUD
Headers show

Commit Message

Benoît Thébaudeau April 3, 2013, 6:04 a.m. UTC 
The syndrome functions should use the page number passed as argument instead of
the page number saved upon NAND_CMD_READ0.

This does not make any difference if the NAND_NO_AUTOINCR option is set, but
otherwise this fixes accesses to the wrong pages.

Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Acked-by: Scott Wood <scottwood@freescale.com>
---
Changes in v10: None
Changes in v9: None
Changes in v8: None
Changes in v7: None
Changes in v6: None
Changes in v5: None
Changes in v4:
 - New patch.

Changes in v3: None
Changes in v2: None

 drivers/mtd/nand/mxc_nand.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index 62d6965..29ceab3 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -463,7 +463,7 @@  static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd,
 	int n;
 
 	_mxc_nand_enable_hwecc(mtd, 0);
-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, host->page_addr);
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
 
 	for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
 		host->col_addr = n * eccsize;
@@ -507,7 +507,7 @@  static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
 	uint8_t *oob = chip->oob_poi;
 
 	MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n",
-	      host->page_addr, buf, oob);
+	      page, buf, oob);
 
 	/* first read the data area and the available portion of OOB */
 	for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
@@ -545,7 +545,7 @@  static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
 
 	/* Then switch ECC off and read the OOB area to get the ECC code */
 	_mxc_nand_enable_hwecc(mtd, 0);
-	chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, host->page_addr);
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page);
 	eccsteps = chip->ecc.steps;
 	oob = chip->oob_poi + chip->ecc.prepad;
 	for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {