[3.5.y.z,extended,stable] Patch "ath9k_hw: revert chainmask to user configuration after" has been added to staging queue

Message ID 1364828680-11321-1-git-send-email-luis.henriques@canonical.com
State New
Headers show

Commit Message

Luis Henriques April 1, 2013, 3:04 p.m.
This is a note to let you know that I have just added a patch titled

    ath9k_hw: revert chainmask to user configuration after

to the linux-3.5.y-queue branch of the 3.5.y.z extended stable tree 
which can be found at:


If you, or anyone else, feels it should not be added to this tree, please 
reply to this email.

For more information about the 3.5.y.z tree, see



From df7832eb4d7296d7696bd8f5aa85c02b996ad5ac Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Fri, 15 Mar 2013 14:53:31 +0100
Subject: [PATCH] ath9k_hw: revert chainmask to user configuration after

commit 74632d11a133b5baf6b9d622dd19d2f944d93d94 upstream.

The commit 'ath9k_hw: fix calibration issues on chainmask that don't
include chain 0' changed the hardware chainmask to the chip chainmask
for the duration of the calibration, but the revert to user
configuration in the reset path runs too early.

That causes some issues with limiting the number of antennas (including
spurious failure in hardware-generated packets).

Fix this by reverting the chainmask after the essential parts of the
calibration that need the workaround, and before NF calibration is run.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Tested-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
[ luis: adjust context ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
 drivers/net/wireless/ath/ath9k/ar9003_calib.c | 4 ++++
 1 file changed, 4 insertions(+)



diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index 53aeca7..601213d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -910,6 +910,7 @@  static bool ar9003_hw_init_cal(struct ath_hw *ah,
 					  AR_PHY_CL_TAB_2 };

+	/* Use chip chainmask only for calibration */
 	ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask);

 	if (rtt) {
@@ -1057,6 +1058,9 @@  skip_tx_iqcal:

+	/* Revert chainmask to runtime parameters */
+	ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask);
 	/* Initialize list pointers */
 	ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;
 	ah->supp_cals = IQ_MISMATCH_CAL;