[U-Boot,v2,batch,4,22/29] powerpc/p2041: fix serdes reference clock frequency display for PC board

Submitted by York Sun on March 25, 2013, 5:40 p.m.

Details

Message ID 1364233225-31262-22-git-send-email-yorksun@freescale.com
State Accepted, archived
Delegated to: Andy Fleming
Headers show

Commit Message

York Sun March 25, 2013, 5:40 p.m.
From: Shaohui Xie <Shaohui.Xie@freescale.com>

PC board has different serdes clock setting with PB board, it uses same
serdes frequency setting on bank2 as on bank1. PC board can be distingushed
from PB board by checking CPLD version, if running on PC board, then fix
the serdes reference clock frequency of bank2.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
---
 board/freescale/p2041rdb/p2041rdb.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

Patch hide | download patch | download mbox

diff --git a/board/freescale/p2041rdb/p2041rdb.c b/board/freescale/p2041rdb/p2041rdb.c
index a706a6d..44d3e0c 100644
--- a/board/freescale/p2041rdb/p2041rdb.c
+++ b/board/freescale/p2041rdb/p2041rdb.c
@@ -227,6 +227,17 @@  int misc_init_r(void)
 				"'00' is unsupported\n");
 		else
 			actual[i] = freq[i][clock];
+
+		/*
+		 * PC board uses a different CPLD with PB board, this CPLD
+		 * has cpld_ver_sub = 1, and pcba_ver = 5. But CPLD on PB
+		 * board has cpld_ver_sub = 0, and pcba_ver = 4.
+		 */
+		if ((i == 1) && (CPLD_READ(cpld_ver_sub) == 1) &&
+		    (CPLD_READ(pcba_ver) == 5)) {
+			/* PC board bank2 frequency */
+			actual[i] = freq[i-1][clock];
+		}
 	}
 
 	for (i = 0; i < NUM_SRDS_BANKS; i++) {