diff mbox

[U-Boot,v2,batch,4,03/29] net/phy: fix select line for TN80xx

Message ID 1364233225-31262-3-git-send-email-yorksun@freescale.com
State Accepted, archived
Delegated to: Andy Fleming
Headers show

Commit Message

York Sun March 25, 2013, 5:39 p.m. UTC 
From: Shaohui Xie <Shaohui.Xie@freescale.com>

TN80xx has same PHY ID as TN2020, but it needs different setting to register
30.93 which used to select line, so we read register 30.32 which has
bit 15:12 to indicate PHY hardware version, for TN20xx we will get 3 or 2,
for TN80xx we will get 5 or 4.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
---
 drivers/net/phy/teranetics.c |   16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/phy/teranetics.c b/drivers/net/phy/teranetics.c
index 78447b7..84ce736 100644
--- a/drivers/net/phy/teranetics.c
+++ b/drivers/net/phy/teranetics.c
@@ -34,9 +34,21 @@  int tn2020_config(struct phy_device *phydev)
 		unsigned short restart_an = (MDIO_AN_CTRL1_RESTART |
 						MDIO_AN_CTRL1_ENABLE |
 						MDIO_AN_CTRL1_XNP);
+		u8 phy_hwversion;
 
-		phy_write(phydev, 30, 93, 2);
-		phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an);
+		/*
+		 * bit 15:12 of register 30.32 indicates PHY hardware
+		 * version. It can be used to distinguish TN80xx from
+		 * TN2020. TN2020 needs write 0x2 to 30.93, but TN80xx
+		 * needs 0x1.
+		 */
+		phy_hwversion = (phy_read(phydev, 30, 32) >> 12) & 0xf;
+		if (phy_hwversion <= 3) {
+			phy_write(phydev, 30, 93, 2);
+			phy_write(phydev, MDIO_MMD_AN, MDIO_CTRL1, restart_an);
+		} else {
+			phy_write(phydev, 30, 93, 1);
+		}
 	}
 
 	return 0;