diff mbox

[U-Boot,v2,batch,3,07/17] net/fm: fixup ethernet for mEMAC

Message ID 1364233180-31149-7-git-send-email-yorksun@freescale.com
State Accepted, archived
Delegated to: Andy Fleming
Headers show

Commit Message

York Sun March 25, 2013, 5:39 p.m. UTC 
From: Shengzhou Liu <Shengzhou.Liu@freescale.com>

- set proper compatible property name for mEMAC.
- fixed ft_fixup_port for dual-role mEMAC, which will lead to
  MAC node disabled incorrectly.

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
---
 drivers/net/fm/fm.h   |    2 ++
 drivers/net/fm/init.c |   25 +++++++++++++++++++++++++
 2 files changed, 27 insertions(+)
diff mbox

Patch

diff --git a/drivers/net/fm/fm.h b/drivers/net/fm/fm.h
index 228df33..ba581e9 100644
--- a/drivers/net/fm/fm.h
+++ b/drivers/net/fm/fm.h
@@ -152,4 +152,6 @@  struct fm_eth {
 #define MAX_RXBUF_LOG2		11
 #define MAX_RXBUF_LEN		(1 << MAX_RXBUF_LOG2)
 
+#define PORT_IS_ENABLED(port)	fm_info[fm_port_to_index(port)].enabled
+
 #endif /* __FM_H__ */
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index d12ec9b..5908c32 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -238,6 +238,26 @@  static void ft_fixup_port(void *blob, struct fm_eth_info *info, char *prop)
 		return ;
 	}
 
+#ifdef CONFIG_SYS_FMAN_V3
+	/*
+	 * Physically FM1_DTSEC9 and FM1_10GEC1 use the same dual-role MAC, when
+	 * FM1_10GEC1 is enabled and  FM1_DTSEC9 is disabled, ensure that the
+	 * dual-role MAC is not disabled, ditto for other dual-role MACs.
+	 */
+	if (((info->port == FM1_DTSEC9) && (PORT_IS_ENABLED(FM1_10GEC1)))	||
+	    ((info->port == FM1_DTSEC10) && (PORT_IS_ENABLED(FM1_10GEC2)))	||
+	    ((info->port == FM1_10GEC1) && (PORT_IS_ENABLED(FM1_DTSEC9)))	||
+	    ((info->port == FM1_10GEC2) && (PORT_IS_ENABLED(FM1_DTSEC10)))
+#if (CONFIG_SYS_NUM_FMAN == 2)
+										||
+	    ((info->port == FM2_DTSEC9) && (PORT_IS_ENABLED(FM2_10GEC1)))	||
+	    ((info->port == FM2_DTSEC10) && (PORT_IS_ENABLED(FM2_10GEC2)))	||
+	    ((info->port == FM2_10GEC1) && (PORT_IS_ENABLED(FM2_DTSEC9)))	||
+	    ((info->port == FM2_10GEC2) && (PORT_IS_ENABLED(FM2_DTSEC10)))
+#endif
+	)
+		return;
+#endif
 	/* board code might have caused offset to change */
 	off = fdt_node_offset_by_compat_reg(blob, prop, paddr);
 
@@ -255,10 +275,15 @@  void fdt_fixup_fman_ethernet(void *blob)
 {
 	int i;
 
+#ifdef CONFIG_SYS_FMAN_V3
+	for (i = 0; i < ARRAY_SIZE(fm_info); i++)
+		ft_fixup_port(blob, &fm_info[i], "fsl,fman-memac");
+#else
 	for (i = 0; i < ARRAY_SIZE(fm_info); i++) {
 		if (fm_info[i].type == FM_ETH_1G_E)
 			ft_fixup_port(blob, &fm_info[i], "fsl,fman-1g-mac");
 		else
 			ft_fixup_port(blob, &fm_info[i], "fsl,fman-10g-mac");
 	}
+#endif
 }