Patchwork [28/41] bnx2x: Using nvram default WoL config

login
register
mail settings
Submitter Eilon Greenstein
Date Feb. 12, 2009, 6:37 p.m.
Message ID <1234463872.1863.160.camel@lb-tlvb-eliezer>
Download mbox | patch
Permalink /patch/23050/
State Accepted
Delegated to: David Miller
Headers show

Comments

Eilon Greenstein - Feb. 12, 2009, 6:37 p.m.
Subject: [PATCH 28/41]bnx2x: Using nvram default WoL config
The driver default WoL setting is set to the nvram default value

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
 drivers/net/bnx2x_main.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

Patch

diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 2e95799..a14fe75 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -8027,6 +8027,12 @@  static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
 		bp->link_params.feature_config_flags &=
 				~FEATURE_CONFIG_MODULE_ENFORCMENT_ENABLED;
 
+	/* If the device is capable of WoL, set the default state according
+	 * to the HW
+	 */
+	bp->wol = (!(bp->flags & NO_WOL_FLAG) &&
+		   (config & PORT_FEATURE_WOL_ENABLED));
+
 	BNX2X_DEV_INFO("lane_config 0x%08x  ext_phy_config 0x%08x"
 		       "  speed_cap_mask 0x%08x  link_config 0x%08x\n",
 		       bp->link_params.lane_config,