Patchwork [v5,01/17] of/pci: Provide support for parsing PCI DT ranges property

login
register
mail settings
Submitter Thomas Petazzoni
Date March 21, 2013, 5:30 p.m.
Message ID <1363887025-19931-2-git-send-email-thomas.petazzoni@free-electrons.com>
Download mbox | patch
Permalink /patch/229767/
State Superseded
Headers show

Comments

Thomas Petazzoni - March 21, 2013, 5:30 p.m.
From: Andrew Murray <Andrew.Murray@arm.com>

This patch factors out common implementations patterns to reduce overall kernel
code and provide a means for host bridge drivers to directly obtain struct
resources from the DT's ranges property without relying on architecture specific
DT handling. This will make it easier to write archiecture independent host bridge
drivers and mitigate against further duplication of DT parsing code.

This patch can be used in the following way:

	struct of_pci_range_iter iter;
	for_each_of_pci_range(&iter, np) {

		//directly access properties of the address range, e.g.:
		//iter.pci_space, iter.pci_addr, iter.cpu_addr, iter.size or
		//iter.flags

		//alternatively obtain a struct resource, e.g.:
		//struct resource res;
		//range_iter_fill_resource(iter, np, res);
	}

Additionally the implementation takes care of adjacent ranges and merges them
into a single range (as was the case with powerpc and microblaze).

The modifications to microblaze, mips and powerpc have not been tested.

Signed-off-by: Andrew Murray <Andrew.Murray@arm.com>
Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---

Compared to the v2 sent by Andrew Murray, Thomas Petazzoni did:

 * Add a memset() on the struct of_pci_range_iter when starting the
   for loop in for_each_pci_range(). Otherwise, with an uninitialized
   of_pci_range_iter, of_pci_process_ranges() may crash.

 * Add parenthesis around 'res', 'np' and 'iter' in the
   for_each_of_pci_range macro definitions. Otherwise, passing
   something like &foobar as 'res' didn't work.

 * Rebased on top of 3.9-rc2, which required fixing a few conflicts in
   the Microblaze code.

v2:
  This follows on from suggestions made by Grant Likely
  (marc.info/?l=linux-kernel&m=136079602806328)
---
 arch/microblaze/pci/pci-common.c |  106 ++++++++++++--------------------------
 arch/mips/pci/pci.c              |   44 ++++------------
 arch/powerpc/kernel/pci-common.c |   93 ++++++++++-----------------------
 drivers/of/address.c             |   54 +++++++++++++++++++
 include/linux/of_address.h       |   31 +++++++++++
 5 files changed, 155 insertions(+), 173 deletions(-)
Andrew Murray - March 22, 2013, 10 a.m.
On Thu, Mar 21, 2013 at 05:30:09PM +0000, Thomas Petazzoni wrote:
> From: Andrew Murray <Andrew.Murray@arm.com>
> 
> This patch factors out common implementations patterns to reduce overall kernel
> code and provide a means for host bridge drivers to directly obtain struct
> resources from the DT's ranges property without relying on architecture specific
> DT handling. This will make it easier to write archiecture independent host bridge
> drivers and mitigate against further duplication of DT parsing code.
> 
> This patch can be used in the following way:
> 
>         struct of_pci_range_iter iter;
>         for_each_of_pci_range(&iter, np) {
> 
>                 //directly access properties of the address range, e.g.:
>                 //iter.pci_space, iter.pci_addr, iter.cpu_addr, iter.size or
>                 //iter.flags
> 
>                 //alternatively obtain a struct resource, e.g.:
>                 //struct resource res;
>                 //range_iter_fill_resource(iter, np, res);
>         }
> 
> Additionally the implementation takes care of adjacent ranges and merges them
> into a single range (as was the case with powerpc and microblaze).
> 
> The modifications to microblaze, mips and powerpc have not been tested.
> 
> Signed-off-by: Andrew Murray <Andrew.Murray@arm.com>
> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
> 
> Compared to the v2 sent by Andrew Murray, Thomas Petazzoni did:
> 
>  * Add a memset() on the struct of_pci_range_iter when starting the
>    for loop in for_each_pci_range(). Otherwise, with an uninitialized
>    of_pci_range_iter, of_pci_process_ranges() may crash.
> 
>  * Add parenthesis around 'res', 'np' and 'iter' in the
>    for_each_of_pci_range macro definitions. Otherwise, passing
>    something like &foobar as 'res' didn't work.
> 
>  * Rebased on top of 3.9-rc2, which required fixing a few conflicts in
>    the Microblaze code.
> 
The changes here against my v2 look good to me.

Acked-by: Andrew Murray <andrew.murray@arm.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Thierry Reding - March 22, 2013, 10:12 a.m.
On Thu, Mar 21, 2013 at 06:30:09PM +0100, Thomas Petazzoni wrote:
> From: Andrew Murray <Andrew.Murray@arm.com>
> 
> This patch factors out common implementations patterns to reduce overall kernel
> code and provide a means for host bridge drivers to directly obtain struct
> resources from the DT's ranges property without relying on architecture specific
> DT handling. This will make it easier to write archiecture independent host bridge
> drivers and mitigate against further duplication of DT parsing code.
> 
> This patch can be used in the following way:
> 
> 	struct of_pci_range_iter iter;
> 	for_each_of_pci_range(&iter, np) {
> 
> 		//directly access properties of the address range, e.g.:
> 		//iter.pci_space, iter.pci_addr, iter.cpu_addr, iter.size or
> 		//iter.flags
> 
> 		//alternatively obtain a struct resource, e.g.:
> 		//struct resource res;
> 		//range_iter_fill_resource(iter, np, res);
> 	}
> 
> Additionally the implementation takes care of adjacent ranges and merges them
> into a single range (as was the case with powerpc and microblaze).
> 
> The modifications to microblaze, mips and powerpc have not been tested.
> 
> Signed-off-by: Andrew Murray <Andrew.Murray@arm.com>
> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> ---
> 
> Compared to the v2 sent by Andrew Murray, Thomas Petazzoni did:
> 
>  * Add a memset() on the struct of_pci_range_iter when starting the
>    for loop in for_each_pci_range(). Otherwise, with an uninitialized
>    of_pci_range_iter, of_pci_process_ranges() may crash.

This sounds like you're trying to do too much within the for loop. When
we discussed this previously I had a vague idea that this functionality
could be wrapped into something a bit more object-like.

What I had in mind was something like:

	struct of_pci_range_parser;
	struct of_pci_range;

	struct of_pci_range_parser parser;
	struct of_pci_range range;

	err = of_pci_range_parser(&parser, np);
	if (err < 0)
		return err;

	for_each_of_pci_range(range, parser) {
		struct resource res;

		...
		usage of range similar to iterator
		...

		of_pci_range_to_resource(&res, &range);
	}

In the above the of_pci_range structure pretty much replaces the
iterator and the whole is wrapped up within a parser structure to give
some extra flexibility and provides for easier (or more structured)
setup compared to doing all of it within the loop statement.

But aside from the (perceived?) increased robustness there's not a lot
of technical benefit over your implementation, so it isn't a very hard
objection. I find it to be a little more encapsulated and therefore
easier to work with, but that's possibly just a matter of taste.

Thierry
Thomas Petazzoni - March 22, 2013, 10:20 a.m.
On Fri, 22 Mar 2013 11:12:39 +0100, Thierry Reding wrote:

> This sounds like you're trying to do too much within the for loop. When
> we discussed this previously I had a vague idea that this functionality
> could be wrapped into something a bit more object-like.
> 
> What I had in mind was something like:
> 
> 	struct of_pci_range_parser;
> 	struct of_pci_range;
> 
> 	struct of_pci_range_parser parser;
> 	struct of_pci_range range;
> 
> 	err = of_pci_range_parser(&parser, np);
> 	if (err < 0)
> 		return err;
> 
> 	for_each_of_pci_range(range, parser) {
> 		struct resource res;
> 
> 		...
> 		usage of range similar to iterator
> 		...
> 
> 		of_pci_range_to_resource(&res, &range);
> 	}
> 
> In the above the of_pci_range structure pretty much replaces the
> iterator and the whole is wrapped up within a parser structure to give
> some extra flexibility and provides for easier (or more structured)
> setup compared to doing all of it within the loop statement.
> 
> But aside from the (perceived?) increased robustness there's not a lot
> of technical benefit over your implementation, so it isn't a very hard
> objection. I find it to be a little more encapsulated and therefore
> easier to work with, but that's possibly just a matter of taste.

I don't have a strong opinion on this. Andrew, what do you think?

Thomas
Andrew Murray - March 22, 2013, 11:03 a.m.
On Fri, Mar 22, 2013 at 10:20:59AM +0000, Thomas Petazzoni wrote:
> 
> On Fri, 22 Mar 2013 11:12:39 +0100, Thierry Reding wrote:
> 
> > This sounds like you're trying to do too much within the for loop. When
> > we discussed this previously I had a vague idea that this functionality
> > could be wrapped into something a bit more object-like.
> > 
> > What I had in mind was something like:
> > 
> > 	struct of_pci_range_parser;
> > 	struct of_pci_range;
> > 
> > 	struct of_pci_range_parser parser;
> > 	struct of_pci_range range;
> > 
> > 	err = of_pci_range_parser(&parser, np);
> > 	if (err < 0)
> > 		return err;
> > 
> > 	for_each_of_pci_range(range, parser) {
> > 		struct resource res;
> > 
> > 		...
> > 		usage of range similar to iterator
> > 		...
> > 
> > 		of_pci_range_to_resource(&res, &range);
> > 	}
> > 
> > In the above the of_pci_range structure pretty much replaces the
> > iterator and the whole is wrapped up within a parser structure to give
> > some extra flexibility and provides for easier (or more structured)
> > setup compared to doing all of it within the loop statement.
> > 
> > But aside from the (perceived?) increased robustness there's not a lot
> > of technical benefit over your implementation, so it isn't a very hard
> > objection. I find it to be a little more encapsulated and therefore
> > easier to work with, but that's possibly just a matter of taste.
> 
> I don't have a strong opinion on this. Andrew, what do you think?

The changes Thierry suggest are subtle but it does look a lot cleaner, it
would move the memset elsewhere and probably split the of_pci_process_ranges
function into two. I think this is all good. Though I'm not sure when
of_pci_range_parser would ever return an error (perhaps if ranges doesn't
exist? - should that be treated as an error?).

Perhaps Grant can provide some feedback - the patch originally provided a
parser for ARM without adding more arch code - this then became a refactoring
exercise for ranges parsing across the kernel. I think this patch has gone as
far as it can in that vein without introducing common pci_controller
structures. All we need here is a parser that [at least] ARM can use to support
the pending ARM host-bridge drivers. Is its current form likely to be acceptable?

I'm happy to update the patch for Thierry's suggestions.

Thanks,

Andrew Murray
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c
index 9ea521e..85adf91 100644
--- a/arch/microblaze/pci/pci-common.c
+++ b/arch/microblaze/pci/pci-common.c
@@ -658,67 +658,36 @@  void pci_resource_to_user(const struct pci_dev *dev, int bar,
 void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				  struct device_node *dev, int primary)
 {
-	const u32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(dev);
-	int np = pna + 5;
 	int memno = 0, isa_hole = -1;
-	u32 pci_space;
-	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
 	unsigned long long isa_mb = 0;
 	struct resource *res;
+	struct of_pci_range_iter iter;
 
 	pr_info("PCI host bridge %s %s ranges:\n",
 	       dev->full_name, primary ? "(primary)" : "");
 
-	/* Get ranges property */
-	ranges = of_get_property(dev, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
-
-	/* Parse it */
 	pr_debug("Parsing ranges property...\n");
-	while ((rlen -= np * 4) >= 0) {
+	for_each_of_pci_range(&iter, dev) {
 		/* Read next ranges element */
-		pci_space = ranges[0];
-		pci_addr = of_read_number(ranges + 1, 2);
-		cpu_addr = of_translate_address(dev, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-
-		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx ",
-				pci_space, pci_addr);
-		pr_debug("cpu_addr:0x%016llx size:0x%016llx\n",
-					cpu_addr, size);
-
-		ranges += np;
+		pr_debug("pci_space: 0x%08x pci_addr:0x%016llx "
+				"cpu_addr:0x%016llx size:0x%016llx\n",
+				iter.pci_space, iter.pci_addr, iter.cpu_addr,
+				iter.size);
 
 		/* If we failed translation or got a zero-sized region
 		 * (some FW try to feed us with non sensical zero sized regions
 		 * such as power3 which look like some kind of attempt
 		 * at exposing the VGA memory hole)
 		 */
-		if (cpu_addr == OF_BAD_ADDR || size == 0)
+		if (iter.cpu_addr == OF_BAD_ADDR || iter.size == 0)
 			continue;
 
-		/* Now consume following elements while they are contiguous */
-		for (; rlen >= np * sizeof(u32);
-		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
-				break;
-			pci_next = of_read_number(ranges + 1, 2);
-			cpu_next = of_translate_address(dev, ranges + 3);
-			if (pci_next != pci_addr + size ||
-			    cpu_next != cpu_addr + size)
-				break;
-			size += of_read_number(ranges + pna + 3, 2);
-		}
-
 		/* Act based on address space type */
 		res = NULL;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
+		if (iter.flags & IORESOURCE_IO) {
 			pr_info("  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr);
+				iter.cpu_addr, iter.cpu_addr + iter.size - 1,
+				iter.pci_addr);
 
 			/* We support only one IO range */
 			if (hose->pci_io_size) {
@@ -726,11 +695,11 @@  void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				continue;
 			}
 			/* On 32 bits, limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
+			if (iter.size > 0x01000000)
+				iter.size = 0x01000000;
 
 			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(cpu_addr, size);
+			hose->io_base_virt = ioremap(iter.cpu_addr, iter.size);
 
 			/* Expect trouble if pci_addr is not 0 */
 			if (primary)
@@ -739,19 +708,18 @@  void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			/* pci_io_size and io_base_phys always represent IO
 			 * space starting at 0 so we factor in pci_addr
 			 */
-			hose->pci_io_size = pci_addr + size;
-			hose->io_base_phys = cpu_addr - pci_addr;
+			hose->pci_io_size = iter.pci_addr + iter.size;
+			hose->io_base_phys = iter.cpu_addr - iter.pci_addr;
 
 			/* Build resource */
 			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = pci_addr;
-			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
+			iter.cpu_addr = iter.pci_addr;
+		} else if (iter.flags & IORESOURCE_MEM) {
 			pr_info(" MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr,
-			       (pci_space & 0x40000000) ? "Prefetch" : "");
+				iter.cpu_addr, iter.cpu_addr + iter.size - 1,
+				iter.pci_addr,
+				(iter.pci_space & 0x40000000) ?
+				"Prefetch" : "");
 
 			/* We support only 3 memory ranges */
 			if (memno >= 3) {
@@ -759,13 +727,13 @@  void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				continue;
 			}
 			/* Handles ISA memory hole space here */
-			if (pci_addr == 0) {
+			if (iter.pci_addr == 0) {
 				isa_mb = cpu_addr;
 				isa_hole = memno;
 				if (primary || isa_mem_base == 0)
-					isa_mem_base = cpu_addr;
-				hose->isa_mem_phys = cpu_addr;
-				hose->isa_mem_size = size;
+					isa_mem_base = iter.cpu_addr;
+				hose->isa_mem_phys = iter.cpu_addr;
+				hose->isa_mem_size = iter.size;
 			}
 
 			/* We get the PCI/Mem offset from the first range or
@@ -773,30 +741,22 @@  void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			 * hole. If they don't match, bugger.
 			 */
 			if (memno == 0 ||
-			    (isa_hole >= 0 && pci_addr != 0 &&
+			    (isa_hole >= 0 && iter.pci_addr != 0 &&
 			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = cpu_addr - pci_addr;
-			else if (pci_addr != 0 &&
-				 hose->pci_mem_offset != cpu_addr - pci_addr) {
+				hose->pci_mem_offset = iter.cpu_addr
+							- iter.pci_addr;
+			else if (iter.pci_addr != 0 &&
+				 hose->pci_mem_offset != iter.cpu_addr
+							- iter.pci_addr) {
 				pr_info(" \\--> Skipped (offset mismatch) !\n");
 				continue;
 			}
 
 			/* Build resource */
 			res = &hose->mem_resources[memno++];
-			res->flags = IORESOURCE_MEM;
-			if (pci_space & 0x40000000)
-				res->flags |= IORESOURCE_PREFETCH;
-			res->start = cpu_addr;
-			break;
-		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
 		}
+		if (res != NULL)
+			range_iter_fill_resource(iter, dev, res);
 	}
 
 	/* If there's an ISA hole and the pci_mem_offset is -not- matching
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c
index 0872f12..8358cf8 100644
--- a/arch/mips/pci/pci.c
+++ b/arch/mips/pci/pci.c
@@ -122,51 +122,27 @@  static void pcibios_scanbus(struct pci_controller *hose)
 #ifdef CONFIG_OF
 void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node)
 {
-	const __be32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(node);
-	int np = pna + 5;
+	struct of_pci_range_iter iter;
 
 	pr_info("PCI host bridge %s ranges:\n", node->full_name);
-	ranges = of_get_property(node, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
 	hose->of_node = node;
 
-	while ((rlen -= np * 4) >= 0) {
-		u32 pci_space;
+	for_each_of_pci_range(&iter, node) {
 		struct resource *res = NULL;
-		u64 addr, size;
-
-		pci_space = be32_to_cpup(&ranges[0]);
-		addr = of_translate_address(node, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-		ranges += np;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
+
+		if (iter.flags & IORESOURCE_IO) {
 			pr_info("  IO 0x%016llx..0x%016llx\n",
-					addr, addr + size - 1);
+					iter.addr, iter.addr + iter.size - 1);
 			hose->io_map_base =
-				(unsigned long)ioremap(addr, size);
+				(unsigned long)ioremap(iter.addr, iter.size);
 			res = hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
+		} else if (iter.flags & IORESOURCE_MEM) {
 			pr_info(" MEM 0x%016llx..0x%016llx\n",
-					addr, addr + size - 1);
+					iter.addr, iter.addr + iter.size - 1);
 			res = hose->mem_resource;
-			res->flags = IORESOURCE_MEM;
-			break;
-		}
-		if (res != NULL) {
-			res->start = addr;
-			res->name = node->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
 		}
+		if (res != NULL)
+			range_iter_fill_resource(iter, node, res);
 	}
 }
 #endif
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index fa12ae4..9230b27 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -676,61 +676,31 @@  void pci_resource_to_user(const struct pci_dev *dev, int bar,
 void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				  struct device_node *dev, int primary)
 {
-	const u32 *ranges;
-	int rlen;
-	int pna = of_n_addr_cells(dev);
-	int np = pna + 5;
 	int memno = 0, isa_hole = -1;
-	u32 pci_space;
-	unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
 	unsigned long long isa_mb = 0;
 	struct resource *res;
+	struct of_pci_range_iter iter;
 
 	printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
 	       dev->full_name, primary ? "(primary)" : "");
 
-	/* Get ranges property */
-	ranges = of_get_property(dev, "ranges", &rlen);
-	if (ranges == NULL)
-		return;
-
 	/* Parse it */
-	while ((rlen -= np * 4) >= 0) {
-		/* Read next ranges element */
-		pci_space = ranges[0];
-		pci_addr = of_read_number(ranges + 1, 2);
-		cpu_addr = of_translate_address(dev, ranges + 3);
-		size = of_read_number(ranges + pna + 3, 2);
-		ranges += np;
-
+	for_each_of_pci_range(&iter, dev) {
 		/* If we failed translation or got a zero-sized region
 		 * (some FW try to feed us with non sensical zero sized regions
 		 * such as power3 which look like some kind of attempt at exposing
 		 * the VGA memory hole)
 		 */
-		if (cpu_addr == OF_BAD_ADDR || size == 0)
+		if (iter.cpu_addr == OF_BAD_ADDR || iter.size == 0)
 			continue;
 
-		/* Now consume following elements while they are contiguous */
-		for (; rlen >= np * sizeof(u32);
-		     ranges += np, rlen -= np * 4) {
-			if (ranges[0] != pci_space)
-				break;
-			pci_next = of_read_number(ranges + 1, 2);
-			cpu_next = of_translate_address(dev, ranges + 3);
-			if (pci_next != pci_addr + size ||
-			    cpu_next != cpu_addr + size)
-				break;
-			size += of_read_number(ranges + pna + 3, 2);
-		}
-
 		/* Act based on address space type */
 		res = NULL;
-		switch ((pci_space >> 24) & 0x3) {
-		case 1:		/* PCI IO space */
+		if (iter.flags & IORESOURCE_IO) {
 			printk(KERN_INFO
 			       "  IO 0x%016llx..0x%016llx -> 0x%016llx\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr);
+			       iter.cpu_addr, iter.cpu_addr + iter.size - 1,
+			       iter.pci_addr);
 
 			/* We support only one IO range */
 			if (hose->pci_io_size) {
@@ -740,11 +710,11 @@  void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			}
 #ifdef CONFIG_PPC32
 			/* On 32 bits, limit I/O space to 16MB */
-			if (size > 0x01000000)
-				size = 0x01000000;
+			if (iter.size > 0x01000000)
+				iter.size = 0x01000000;
 
 			/* 32 bits needs to map IOs here */
-			hose->io_base_virt = ioremap(cpu_addr, size);
+			hose->io_base_virt = ioremap(iter.cpu_addr, iter.size);
 
 			/* Expect trouble if pci_addr is not 0 */
 			if (primary)
@@ -754,20 +724,18 @@  void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			/* pci_io_size and io_base_phys always represent IO
 			 * space starting at 0 so we factor in pci_addr
 			 */
-			hose->pci_io_size = pci_addr + size;
-			hose->io_base_phys = cpu_addr - pci_addr;
+			hose->pci_io_size = iter.pci_addr + iter.size;
+			hose->io_base_phys = iter.cpu_addr - iter.pci_addr;
 
 			/* Build resource */
 			res = &hose->io_resource;
-			res->flags = IORESOURCE_IO;
-			res->start = pci_addr;
-			break;
-		case 2:		/* PCI Memory space */
-		case 3:		/* PCI 64 bits Memory space */
+			iter.cpu_addr = iter.pci_addr;
+		} else if (flags & IORESOURCE_MEM) {
 			printk(KERN_INFO
 			       " MEM 0x%016llx..0x%016llx -> 0x%016llx %s\n",
-			       cpu_addr, cpu_addr + size - 1, pci_addr,
-			       (pci_space & 0x40000000) ? "Prefetch" : "");
+			       iter.cpu_addr, iter.cpu_addr + iter.size - 1,
+			       iter.pci_addr,
+			       (iter.pci_space & 0x40000000) ? "Prefetch" : "");
 
 			/* We support only 3 memory ranges */
 			if (memno >= 3) {
@@ -776,13 +744,13 @@  void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 				continue;
 			}
 			/* Handles ISA memory hole space here */
-			if (pci_addr == 0) {
+			if (iter.pci_addr == 0) {
 				isa_mb = cpu_addr;
 				isa_hole = memno;
 				if (primary || isa_mem_base == 0)
-					isa_mem_base = cpu_addr;
-				hose->isa_mem_phys = cpu_addr;
-				hose->isa_mem_size = size;
+					isa_mem_base = iter.cpu_addr;
+				hose->isa_mem_phys = iter.cpu_addr;
+				hose->isa_mem_size = iter.size;
 			}
 
 			/* We get the PCI/Mem offset from the first range or
@@ -790,11 +758,13 @@  void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 			 * hole. If they don't match, bugger.
 			 */
 			if (memno == 0 ||
-			    (isa_hole >= 0 && pci_addr != 0 &&
+			    (isa_hole >= 0 && iter.pci_addr != 0 &&
 			     hose->pci_mem_offset == isa_mb))
-				hose->pci_mem_offset = cpu_addr - pci_addr;
+				hose->pci_mem_offset = iter.cpu_addr -
+							iter.pci_addr;
 			else if (pci_addr != 0 &&
-				 hose->pci_mem_offset != cpu_addr - pci_addr) {
+				 hose->pci_mem_offset != iter.cpu_addr -
+							iter.pci_addr) {
 				printk(KERN_INFO
 				       " \\--> Skipped (offset mismatch) !\n");
 				continue;
@@ -802,19 +772,10 @@  void pci_process_bridge_OF_ranges(struct pci_controller *hose,
 
 			/* Build resource */
 			res = &hose->mem_resources[memno++];
-			res->flags = IORESOURCE_MEM;
-			if (pci_space & 0x40000000)
-				res->flags |= IORESOURCE_PREFETCH;
-			res->start = cpu_addr;
 			break;
 		}
-		if (res != NULL) {
-			res->name = dev->full_name;
-			res->end = res->start + size - 1;
-			res->parent = NULL;
-			res->sibling = NULL;
-			res->child = NULL;
-		}
+		if (res != NULL)
+			range_iter_fill_resource(iter, dev, res);
 	}
 
 	/* If there's an ISA hole and the pci_mem_offset is -not- matching
diff --git a/drivers/of/address.c b/drivers/of/address.c
index 04da786..2ab34e2 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -227,6 +227,60 @@  int of_pci_address_to_resource(struct device_node *dev, int bar,
 	return __of_address_to_resource(dev, addrp, size, flags, NULL, r);
 }
 EXPORT_SYMBOL_GPL(of_pci_address_to_resource);
+
+struct of_pci_range_iter *of_pci_process_ranges(struct of_pci_range_iter *iter,
+						struct device_node *node)
+{
+	const int na = 3, ns = 2;
+	int rlen;
+
+	if (!iter->range) {
+		iter->pna = of_n_addr_cells(node);
+		iter->np = iter->pna + na + ns;
+
+		iter->range = of_get_property(node, "ranges", &rlen);
+		if (iter->range == NULL)
+			return NULL;
+
+		iter->end = iter->range + rlen / sizeof(__be32);
+	}
+
+	if (iter->range + iter->np > iter->end)
+		return NULL;
+
+	iter->pci_space = be32_to_cpup(iter->range);
+	iter->flags = of_bus_pci_get_flags(iter->range);
+	iter->pci_addr = of_read_number(iter->range + 1, ns);
+	iter->cpu_addr = of_translate_address(node, iter->range + na);
+	iter->size = of_read_number(iter->range + iter->pna + na, ns);
+
+	iter->range += iter->np;
+
+	/* Now consume following elements while they are contiguous */
+	while (iter->range + iter->np <= iter->end) {
+		u32 flags, pci_space;
+		u64 pci_addr, cpu_addr, size;
+
+		pci_space = be32_to_cpup(iter->range);
+		flags = of_bus_pci_get_flags(iter->range);
+		pci_addr = of_read_number(iter->range + 1, ns);
+		cpu_addr = of_translate_address(node, iter->range + na);
+		size = of_read_number(iter->range + iter->pna + na, ns);
+
+		if (flags != iter->flags)
+			break;
+		if (pci_addr != iter->pci_addr + iter->size ||
+		    cpu_addr != iter->cpu_addr + iter->size)
+			break;
+
+		iter->size += size;
+		iter->range += iter->np;
+	}
+
+	return iter;
+}
+EXPORT_SYMBOL_GPL(of_pci_process_ranges);
+
 #endif /* CONFIG_PCI */
 
 /*
diff --git a/include/linux/of_address.h b/include/linux/of_address.h
index 0506eb5..7d5cd11 100644
--- a/include/linux/of_address.h
+++ b/include/linux/of_address.h
@@ -4,6 +4,30 @@ 
 #include <linux/errno.h>
 #include <linux/of.h>
 
+struct of_pci_range_iter {
+	const __be32 *range, *end;
+	int np, pna;
+
+	u32 pci_space;
+	u64 pci_addr;
+	u64 cpu_addr;
+	u64 size;
+	u32 flags;
+};
+
+#define for_each_of_pci_range(iter, np) \
+	for (memset((iter), 0, sizeof(struct of_pci_range_iter)); \
+	     of_pci_process_ranges(iter, np);)
+
+#define range_iter_fill_resource(iter, np, res) \
+	do { \
+		(res)->flags = (iter).flags; \
+		(res)->start = (iter).cpu_addr; \
+		(res)->end = (iter).cpu_addr + (iter).size - 1; \
+		(res)->parent = (res)->child = (res)->sibling = NULL; \
+		(res)->name = (np)->full_name; \
+	} while (0)
+
 #ifdef CONFIG_OF_ADDRESS
 extern u64 of_translate_address(struct device_node *np, const __be32 *addr);
 extern bool of_can_translate_address(struct device_node *dev);
@@ -27,6 +51,8 @@  static inline unsigned long pci_address_to_pio(phys_addr_t addr) { return -1; }
 #define pci_address_to_pio pci_address_to_pio
 #endif
 
+struct of_pci_range_iter *of_pci_process_ranges(struct of_pci_range_iter *iter,
+						struct device_node *node);
 #else /* CONFIG_OF_ADDRESS */
 #ifndef of_address_to_resource
 static inline int of_address_to_resource(struct device_node *dev, int index,
@@ -53,6 +79,11 @@  static inline const __be32 *of_get_address(struct device_node *dev, int index,
 {
 	return NULL;
 }
+struct of_pci_range_iter *of_pci_process_ranges(struct of_pci_range_iter *iter,
+						struct device_node *node)
+{
+	return NULL;
+}
 #endif /* CONFIG_OF_ADDRESS */