Patchwork [U-Boot,v4,3/9] am33xx: refactor am33xx clocks and add ti814x support

login
register
mail settings
Submitter Matt Porter
Date March 15, 2013, 8:07 p.m.
Message ID <1363378030-2054-4-git-send-email-mporter@ti.com>
Download mbox | patch
Permalink /patch/228160/
State Accepted
Delegated to: Tom Rini
Headers show

Comments

Matt Porter - March 15, 2013, 8:07 p.m.
Split clock.c for am335x and ti814x and add ti814x specific
clock support.

Signed-off-by: Matt Porter <mporter@ti.com>

---
v4:	no changes
v3:
	* Fix EMIF/L3F clock enable ordering issue
	  (Exposed on UART boot with hang at check for L3F enabled)
v2:
	* remove unused dmtimer support
	* add register structs bit definitions
	* rename soc-specific clock files for consistency
	* move ti814x specific defs to clock_ti814x.c
	* move am335x specific defs to clock_am335x.c
	* fix copyright date
	* remove clocks_*.h and go back to clock.h
---
 arch/arm/cpu/armv7/am33xx/Makefile                 |    3 +-
 .../cpu/armv7/am33xx/{clock.c => clock_am33xx.c}   |   34 +-
 arch/arm/cpu/armv7/am33xx/clock_ti814x.c           |  406 ++++++++++++++++++++
 arch/arm/include/asm/arch-am33xx/clock.h           |    2 +-
 arch/arm/include/asm/arch-am33xx/clocks_am33xx.h   |   33 +-
 5 files changed, 443 insertions(+), 35 deletions(-)
 rename arch/arm/cpu/armv7/am33xx/{clock.c => clock_am33xx.c} (91%)
 create mode 100644 arch/arm/cpu/armv7/am33xx/clock_ti814x.c

Patch

diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile
index 70c443e..c97e30d 100644
--- a/arch/arm/cpu/armv7/am33xx/Makefile
+++ b/arch/arm/cpu/armv7/am33xx/Makefile
@@ -16,7 +16,8 @@  include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(SOC).o
 
-COBJS	+= clock.o
+COBJS-$(CONFIG_AM33XX)	+= clock_am33xx.o
+COBJS-$(CONFIG_TI814X)	+= clock_ti814x.o
 COBJS	+= sys_info.o
 COBJS	+= mem.o
 COBJS	+= ddr.o
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
similarity index 91%
rename from arch/arm/cpu/armv7/am33xx/clock.c
rename to arch/arm/cpu/armv7/am33xx/clock_am33xx.c
index d7d98d1..65cb9f8 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock_am33xx.c
@@ -1,9 +1,9 @@ 
 /*
- * clock.c
+ * clock_am33xx.c
  *
  * clocks for AM33XX based boards
  *
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -42,6 +42,36 @@ 
 #define CPGMAC0_IDLE		0x30000
 #define DPLL_CLKDCOLDO_GATE_CTRL        0x300
 
+#define OSC	(V_OSCK/1000000)
+
+/* MAIN PLL Fdll = 550 MHZ, */
+#define MPUPLL_M	550
+#define MPUPLL_N	(OSC-1)
+#define MPUPLL_M2	1
+
+/* Core PLL Fdll = 1 GHZ, */
+#define COREPLL_M	1000
+#define COREPLL_N	(OSC-1)
+
+#define COREPLL_M4	10	/* CORE_CLKOUTM4 = 200 MHZ */
+#define COREPLL_M5	8	/* CORE_CLKOUTM5 = 250 MHZ */
+#define COREPLL_M6	4	/* CORE_CLKOUTM6 = 500 MHZ */
+
+/*
+ * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll
+ * frequency needs to be set to 960 MHZ. Hence,
+ * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below
+ */
+#define PERPLL_M	960
+#define PERPLL_N	(OSC-1)
+#define PERPLL_M2	5
+
+/* DDR Freq is 266 MHZ for now */
+/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */
+#define DDRPLL_M	266
+#define DDRPLL_N	(OSC-1)
+#define DDRPLL_M2	1
+
 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
 const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
 const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
diff --git a/arch/arm/cpu/armv7/am33xx/clock_ti814x.c b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
new file mode 100644
index 0000000..cb4210f
--- /dev/null
+++ b/arch/arm/cpu/armv7/am33xx/clock_ti814x.c
@@ -0,0 +1,406 @@ 
+/*
+ * clock_ti814x.c
+ *
+ * Clocks for TI814X based boards
+ *
+ * Copyright (C) 2013, Texas Instruments, Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+/* PRCM */
+#define PRCM_MOD_EN		0x2
+
+/* CLK_SRC */
+#define OSC_SRC0		0
+#define OSC_SRC1		1
+
+#define L3_OSC_SRC		OSC_SRC0
+
+#define OSC_0_FREQ		20
+
+#define DCO_HS2_MIN		500
+#define DCO_HS2_MAX		1000
+#define DCO_HS1_MIN		1000
+#define DCO_HS1_MAX		2000
+
+#define SELFREQDCO_HS2		0x00000801
+#define SELFREQDCO_HS1		0x00001001
+
+#define MPU_N			0x1
+#define MPU_M			0x3C
+#define MPU_M2			1
+#define MPU_CLKCTRL		0x1
+
+#define L3_N			19
+#define L3_M			880
+#define L3_M2			4
+#define L3_CLKCTRL		0x801
+
+#define DDR_N			19
+#define DDR_M			666
+#define DDR_M2			2
+#define DDR_CLKCTRL		0x801
+
+/* ADPLLJ register values */
+#define ADPLLJ_CLKCTRL_HS2	0x00000801 /* HS2 mode, TINT2 = 1 */
+#define ADPLLJ_CLKCTRL_HS1	0x00001001 /* HS1 mode, TINT2 = 1 */
+#define ADPLLJ_CLKCTRL_CLKDCOLDOEN	(1 << 29)
+#define ADPLLJ_CLKCTRL_IDLE		(1 << 23)
+#define ADPLLJ_CLKCTRL_CLKOUTEN		(1 << 20)
+#define ADPLLJ_CLKCTRL_CLKOUTLDOEN	(1 << 19)
+#define ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ	(1 << 17)
+#define ADPLLJ_CLKCTRL_LPMODE		(1 << 12)
+#define ADPLLJ_CLKCTRL_DRIFTGUARDIAN	(1 << 11)
+#define ADPLLJ_CLKCTRL_REGM4XEN		(1 << 10)
+#define ADPLLJ_CLKCTRL_TINITZ		(1 << 0)
+#define ADPLLJ_CLKCTRL_CLKDCO		(ADPLLJ_CLKCTRL_CLKDCOLDOEN | \
+					 ADPLLJ_CLKCTRL_CLKOUTEN | \
+					 ADPLLJ_CLKCTRL_CLKOUTLDOEN | \
+					 ADPLLJ_CLKCTRL_CLKDCOLDOPWDNZ)
+
+#define ADPLLJ_STATUS_PHASELOCK		(1 << 10)
+#define ADPLLJ_STATUS_FREQLOCK		(1 << 9)
+#define ADPLLJ_STATUS_PHSFRQLOCK	(ADPLLJ_STATUS_PHASELOCK | \
+					 ADPLLJ_STATUS_FREQLOCK)
+#define ADPLLJ_STATUS_BYPASSACK		(1 << 8)
+#define ADPLLJ_STATUS_BYPASS		(1 << 0)
+#define ADPLLJ_STATUS_BYPASSANDACK	(ADPLLJ_STATUS_BYPASSACK | \
+					 ADPLLJ_STATUS_BYPASS)
+
+#define ADPLLJ_TENABLE_ENB		(1 << 0)
+#define ADPLLJ_TENABLEDIV_ENB		(1 << 0)
+
+#define ADPLLJ_M2NDIV_M2SHIFT		16
+
+#define MPU_PLL_BASE			(PLL_SUBSYS_BASE + 0x048)
+#define L3_PLL_BASE			(PLL_SUBSYS_BASE + 0x110)
+#define DDR_PLL_BASE			(PLL_SUBSYS_BASE + 0x290)
+
+struct ad_pll {
+	unsigned int pwrctrl;
+	unsigned int clkctrl;
+	unsigned int tenable;
+	unsigned int tenablediv;
+	unsigned int m2ndiv;
+	unsigned int mn2div;
+	unsigned int fracdiv;
+	unsigned int bwctrl;
+	unsigned int fracctrl;
+	unsigned int status;
+	unsigned int m3div;
+	unsigned int rampctrl;
+};
+
+#define OSC_SRC_CTRL			(PLL_SUBSYS_BASE + 0x2C0)
+
+/* PRCM */
+#define CM_DEFAULT_BASE			(PRCM_BASE + 0x0500)
+
+struct cm_def {
+	unsigned int resv0[2];
+	unsigned int l3fastclkstctrl;
+	unsigned int resv1[1];
+	unsigned int pciclkstctrl;
+	unsigned int resv2[1];
+	unsigned int ducaticlkstctrl;
+	unsigned int resv3[1];
+	unsigned int emif0clkctrl;
+	unsigned int emif1clkctrl;
+	unsigned int dmmclkctrl;
+	unsigned int fwclkctrl;
+	unsigned int resv4[10];
+	unsigned int usbclkctrl;
+	unsigned int resv5[1];
+	unsigned int sataclkctrl;
+	unsigned int resv6[4];
+	unsigned int ducaticlkctrl;
+	unsigned int pciclkctrl;
+};
+
+#define CM_ALWON_BASE			(PRCM_BASE + 0x1400)
+
+struct cm_alwon {
+	unsigned int l3slowclkstctrl;
+	unsigned int ethclkstctrl;
+	unsigned int l3medclkstctrl;
+	unsigned int mmu_clkstctrl;
+	unsigned int mmucfg_clkstctrl;
+	unsigned int ocmc0clkstctrl;
+	unsigned int vcpclkstctrl;
+	unsigned int mpuclkstctrl;
+	unsigned int sysclk4clkstctrl;
+	unsigned int sysclk5clkstctrl;
+	unsigned int sysclk6clkstctrl;
+	unsigned int rtcclkstctrl;
+	unsigned int l3fastclkstctrl;
+	unsigned int resv0[67];
+	unsigned int mcasp0clkctrl;
+	unsigned int mcasp1clkctrl;
+	unsigned int mcasp2clkctrl;
+	unsigned int mcbspclkctrl;
+	unsigned int uart0clkctrl;
+	unsigned int uart1clkctrl;
+	unsigned int uart2clkctrl;
+	unsigned int gpio0clkctrl;
+	unsigned int gpio1clkctrl;
+	unsigned int i2c0clkctrl;
+	unsigned int i2c1clkctrl;
+	unsigned int mcasp345clkctrl;
+	unsigned int atlclkctrl;
+	unsigned int mlbclkctrl;
+	unsigned int pataclkctrl;
+	unsigned int resv1[1];
+	unsigned int uart3clkctrl;
+	unsigned int uart4clkctrl;
+	unsigned int uart5clkctrl;
+	unsigned int wdtimerclkctrl;
+	unsigned int spiclkctrl;
+	unsigned int mailboxclkctrl;
+	unsigned int spinboxclkctrl;
+	unsigned int mmudataclkctrl;
+	unsigned int resv2[2];
+	unsigned int mmucfgclkctrl;
+	unsigned int resv3[2];
+	unsigned int ocmc0clkctrl;
+	unsigned int vcpclkctrl;
+	unsigned int resv4[2];
+	unsigned int controlclkctrl;
+	unsigned int resv5[2];
+	unsigned int gpmcclkctrl;
+	unsigned int ethernet0clkctrl;
+	unsigned int resv6[1];
+	unsigned int mpuclkctrl;
+	unsigned int debugssclkctrl;
+	unsigned int l3clkctrl;
+	unsigned int l4hsclkctrl;
+	unsigned int l4lsclkctrl;
+	unsigned int rtcclkctrl;
+	unsigned int tpccclkctrl;
+	unsigned int tptc0clkctrl;
+	unsigned int tptc1clkctrl;
+	unsigned int tptc2clkctrl;
+	unsigned int tptc3clkctrl;
+	unsigned int resv7[4];
+	unsigned int dcan01clkctrl;
+	unsigned int mmchs0clkctrl;
+	unsigned int mmchs1clkctrl;
+	unsigned int mmchs2clkctrl;
+	unsigned int custefuseclkctrl;
+};
+
+
+const struct cm_alwon *cmalwon = (struct cm_alwon *)CM_ALWON_BASE;
+const struct cm_def *cmdef = (struct cm_def *)CM_DEFAULT_BASE;
+
+/*
+ * Enable the peripheral clock for required peripherals
+ */
+static void enable_per_clocks(void)
+{
+	/* UART0 */
+	writel(PRCM_MOD_EN, &cmalwon->uart0clkctrl);
+	while (readl(&cmalwon->uart0clkctrl) != PRCM_MOD_EN)
+		;
+
+	/* HSMMC1 */
+	writel(PRCM_MOD_EN, &cmalwon->mmchs1clkctrl);
+	while (readl(&cmalwon->mmchs1clkctrl) != PRCM_MOD_EN)
+		;
+}
+
+/*
+ * select the HS1 or HS2 for DCO Freq
+ * return : CLKCTRL
+ */
+static u32 pll_dco_freq_sel(u32 clkout_dco)
+{
+	if (clkout_dco >= DCO_HS2_MIN && clkout_dco < DCO_HS2_MAX)
+		return SELFREQDCO_HS2;
+	else if (clkout_dco >= DCO_HS1_MIN && clkout_dco < DCO_HS1_MAX)
+		return SELFREQDCO_HS1;
+	else
+		return -1;
+}
+
+/*
+ * select the sigma delta config
+ * return: sigma delta val
+ */
+static u32 pll_sigma_delta_val(u32 clkout_dco)
+{
+	u32 sig_val = 0;
+	float frac_div;
+
+	frac_div = (float) clkout_dco / 250;
+	frac_div = frac_div + 0.90;
+	sig_val = (int)frac_div;
+	sig_val = sig_val << 24;
+
+	return sig_val;
+}
+
+/*
+ * configure individual ADPLLJ
+ */
+static void pll_config(u32 base, u32 n, u32 m, u32 m2,
+		       u32 clkctrl_val, int adpllj)
+{
+	const struct ad_pll *adpll = (struct ad_pll *)base;
+	u32 m2nval, mn2val, read_clkctrl = 0, clkout_dco = 0;
+	u32 sig_val = 0, hs_mod = 0;
+
+	m2nval = (m2 << ADPLLJ_M2NDIV_M2SHIFT) | n;
+	mn2val = m;
+
+	/* calculate clkout_dco */
+	clkout_dco = ((OSC_0_FREQ / (n+1)) * m);
+
+	/* sigma delta & Hs mode selection skip for ADPLLS*/
+	if (adpllj) {
+		sig_val = pll_sigma_delta_val(clkout_dco);
+		hs_mod = pll_dco_freq_sel(clkout_dco);
+	}
+
+	/* by-pass pll */
+	read_clkctrl = readl(&adpll->clkctrl);
+	writel((read_clkctrl | ADPLLJ_CLKCTRL_IDLE), &adpll->clkctrl);
+	while ((readl(&adpll->status) & ADPLLJ_STATUS_BYPASSANDACK)
+		!= ADPLLJ_STATUS_BYPASSANDACK)
+		;
+
+	/* clear TINITZ */
+	read_clkctrl = readl(&adpll->clkctrl);
+	writel((read_clkctrl & ~ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
+
+	/*
+	 * ref_clk = 20/(n + 1);
+	 * clkout_dco = ref_clk * m;
+	 * clk_out = clkout_dco/m2;
+	*/
+	read_clkctrl = readl(&adpll->clkctrl) &
+			     ~(ADPLLJ_CLKCTRL_LPMODE |
+			     ADPLLJ_CLKCTRL_DRIFTGUARDIAN |
+			     ADPLLJ_CLKCTRL_REGM4XEN);
+	writel(m2nval, &adpll->m2ndiv);
+	writel(mn2val, &adpll->mn2div);
+
+	/* Skip for modena(ADPLLS) */
+	if (adpllj) {
+		writel(sig_val, &adpll->fracdiv);
+		writel((read_clkctrl | hs_mod), &adpll->clkctrl);
+	}
+
+	/* Load M2, N2 dividers of ADPLL */
+	writel(ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
+	writel(~ADPLLJ_TENABLEDIV_ENB, &adpll->tenablediv);
+
+	/* Load M, N dividers of ADPLL */
+	writel(ADPLLJ_TENABLE_ENB, &adpll->tenable);
+	writel(~ADPLLJ_TENABLE_ENB, &adpll->tenable);
+
+	/* Configure CLKDCOLDOEN,CLKOUTLDOEN,CLKOUT Enable BITS */
+	read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_CLKDCO;
+	if (adpllj)
+		writel((read_clkctrl | ADPLLJ_CLKCTRL_CLKDCO),
+						&adpll->clkctrl);
+
+	/* Enable TINTZ and disable IDLE(PLL in Active & Locked Mode */
+	read_clkctrl = readl(&adpll->clkctrl) & ~ADPLLJ_CLKCTRL_IDLE;
+	writel((read_clkctrl | ADPLLJ_CLKCTRL_TINITZ), &adpll->clkctrl);
+
+	/* Wait for phase and freq lock */
+	while ((readl(&adpll->status) & ADPLLJ_STATUS_PHSFRQLOCK) !=
+	       ADPLLJ_STATUS_PHSFRQLOCK)
+		;
+}
+
+static void unlock_pll_control_mmr(void)
+{
+	/* TRM 2.10.1.4 and 3.2.7-3.2.11 */
+	writel(0x1EDA4C3D, 0x481C5040);
+	writel(0x2FF1AC2B, 0x48140060);
+	writel(0xF757FDC0, 0x48140064);
+	writel(0xE2BC3A6D, 0x48140068);
+	writel(0x1EBF131D, 0x4814006c);
+	writel(0x6F361E05, 0x48140070);
+}
+
+static void mpu_pll_config(void)
+{
+	pll_config(MPU_PLL_BASE, MPU_N, MPU_M, MPU_M2, MPU_CLKCTRL, 0);
+}
+
+static void l3_pll_config(void)
+{
+	u32 l3_osc_src, rd_osc_src = 0;
+
+	l3_osc_src = L3_OSC_SRC;
+	rd_osc_src = readl(OSC_SRC_CTRL);
+
+	if (OSC_SRC0 == l3_osc_src)
+		writel((rd_osc_src & 0xfffffffe)|0x0, OSC_SRC_CTRL);
+	else
+		writel((rd_osc_src & 0xfffffffe)|0x1, OSC_SRC_CTRL);
+
+	pll_config(L3_PLL_BASE, L3_N, L3_M, L3_M2, L3_CLKCTRL, 1);
+}
+
+void ddr_pll_config(unsigned int ddrpll_m)
+{
+	pll_config(DDR_PLL_BASE, DDR_N, DDR_M, DDR_M2, DDR_CLKCTRL, 1);
+}
+
+void enable_emif_clocks(void) {};
+
+void enable_dmm_clocks(void)
+{
+	writel(PRCM_MOD_EN, &cmdef->fwclkctrl);
+	writel(PRCM_MOD_EN, &cmdef->l3fastclkstctrl);
+	writel(PRCM_MOD_EN, &cmdef->emif0clkctrl);
+	while ((readl(&cmdef->emif0clkctrl)) != PRCM_MOD_EN)
+		;
+	writel(PRCM_MOD_EN, &cmdef->emif1clkctrl);
+	while ((readl(&cmdef->emif1clkctrl)) != PRCM_MOD_EN)
+		;
+	while ((readl(&cmdef->l3fastclkstctrl) & 0x300) != 0x300)
+		;
+	writel(PRCM_MOD_EN, &cmdef->dmmclkctrl);
+	while ((readl(&cmdef->dmmclkctrl)) != PRCM_MOD_EN)
+		;
+	writel(PRCM_MOD_EN, &cmalwon->l3slowclkstctrl);
+	while ((readl(&cmalwon->l3slowclkstctrl) & 0x2100) != 0x2100)
+		;
+}
+
+/*
+ * Configure the PLL/PRCM for necessary peripherals
+ */
+void pll_init()
+{
+	unlock_pll_control_mmr();
+
+	/* Enable the control module */
+	writel(PRCM_MOD_EN, &cmalwon->controlclkctrl);
+
+	mpu_pll_config();
+
+	l3_pll_config();
+
+	/* Enable the required peripherals */
+	enable_per_clocks();
+}
diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h
index 872ff82..ecb5901 100644
--- a/arch/arm/include/asm/arch-am33xx/clock.h
+++ b/arch/arm/include/asm/arch-am33xx/clock.h
@@ -3,7 +3,7 @@ 
  *
  * clock header
  *
- * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ * Copyright (C) 2011, Texas Instruments Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
diff --git a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
index d748dd2..f089b41 100644
--- a/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
+++ b/arch/arm/include/asm/arch-am33xx/clocks_am33xx.h
@@ -3,7 +3,7 @@ 
  *
  * AM33xx clock define
  *
- * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -19,37 +19,8 @@ 
 #ifndef _CLOCKS_AM33XX_H_
 #define _CLOCKS_AM33XX_H_
 
-#define OSC	(V_OSCK/1000000)
-
-/* MAIN PLL Fdll = 550 MHZ, */
-#define MPUPLL_M	550
-#define MPUPLL_N	(OSC-1)
-#define MPUPLL_M2	1
-
-/* Core PLL Fdll = 1 GHZ, */
-#define COREPLL_M	1000
-#define COREPLL_N	(OSC-1)
-
-#define COREPLL_M4	10	/* CORE_CLKOUTM4 = 200 MHZ */
-#define COREPLL_M5	8	/* CORE_CLKOUTM5 = 250 MHZ */
-#define COREPLL_M6	4	/* CORE_CLKOUTM6 = 500 MHZ */
-
-/*
- * USB PHY clock is 960 MHZ. Since, this comes directly from Fdll, Fdll
- * frequency needs to be set to 960 MHZ. Hence,
- * For clkout = 192 MHZ, Fdll = 960 MHZ, divider values are given below
- */
-#define PERPLL_M	960
-#define PERPLL_N	(OSC-1)
-#define PERPLL_M2	5
-
-/* DDR Freq is 266 MHZ for now */
-/* Set Fdll = 400 MHZ , Fdll = M * 2 * CLKINP/ N + 1; clkout = Fdll /(2 * M2) */
-#define DDRPLL_M	266
-#define DDRPLL_N	(OSC-1)
-#define DDRPLL_M2	1
-
 extern void pll_init(void);
 extern void enable_emif_clocks(void);
+extern void enable_dmm_clocks(void);
 
 #endif	/* endif _CLOCKS_AM33XX_H_ */