Patchwork [U-Boot,PULL] : Please pull u-boot-imx

login
register
mail settings
Submitter Stefano Babic
Date March 15, 2013, 1:54 p.m.
Message ID <514327FE.5050809@denx.de>
Download mbox
Permalink /patch/227997/
State Accepted
Delegated to: Albert ARIBAUD
Headers show

Pull-request

git://www.denx.de/git/u-boot-imx.git master

Comments

Stefano Babic - March 15, 2013, 1:54 p.m.
Hi Albert,

here an update pull request after applying Fabio's fixes.

The following changes since commit 4cfc611b4a4ce009cfad46804bec2a1caad8e329:

  ARM: ns9750dev: remove remainders of dead board (2013-02-28 14:49:24
+0100)

are available in the git repository at:

  git://www.denx.de/git/u-boot-imx.git master

for you to fetch changes up to 19a0f7fa271de0345bb2df90d443c547c41e8037:

  nitrogen: Use unsigned long to specify the total RAM size (2013-03-15
14:39:44 +0100)

----------------------------------------------------------------
Benoît Thébaudeau (6):
      imx: mx6q DDR3 init: Fix tMRD
      imx: mx6q DDR3 init: Fix tXPR
      imx: mx6q DDR3 init: Fix SDE_to_RST
      imx: mx6q DDR3 init: Fix RST_to_CKE
      imx: mx6q DDR3 init: Fix MR0.PPD
      imx: mx6q DDR3 init: Benefit from available CL = 7

Eric Nelson (8):
      i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
      i.MX6: mx6qsabrelite: indent with tabs
      i.MX6: consolidate pad names for multi-CPU boards
      i.MX6: crm_regs: define CCM_CCGRx for use in board config files
      i.MX6: crm_regs: define IOMUXC_GPR4/6/7
      i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
      i.MX6: Add DDR controller registers
      Add Boundary Devices Nitrogen6X boards

Fabio Estevam (6):
      mx6: Disable Power Down Bit of watchdog
      mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
      mx23evk: Turn on caches
      common: cmd_sata: Fix usage text for 'sata init'
      mx6: Provide a structure for accessing HDMI registers
      nitrogen6x: Fix RAM size variable

Fadil Berisha (2):
      mxs: timrot: Add support to i.MX23
      mxs: timrot: Rename local macros

Marek Vasut (7):
      mxs: Reset the EMI block on mx23
      mxs: mmc: spi: dma: Better wrap the MXS differences
      mxs: spi: Fix the MXS SPI for mx23
      mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE
      mxs: Squash the header file usage in ehci-mxs
      mxs: Make ehci-mxs multiport capable
      mxs: m28: Enable power to USB port 0

Otavio Salvador (11):
      build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
      mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to
CONFIG_SPL_MXS_PSWITCH_WAIT
      mx23: Document the tRAS lockout setting in memory initialization
      mx23evk: Adjust DRAM control register to use full 128MB of RAM
      led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
      mxs: Fix iomux.h to not break build during assembly stage
      mx23_olinuxino: Add support for status LED
      mx23evk: Enable USB support
      mx23_olinuxino: Enable USB support
      mx23_olinuxino: Add ethernet support
      mx23_olinuxino: Fix warning for implicit declaration

Stefano Babic (3):
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      Merge branch 'master' of git://git.denx.de/u-boot-arm
      USB: drop unneeded header in ehci-mx6

Stephen Warren (1):
      ARM: mx6: use common CPU errata config options

fabio.estevam@freescale.com (1):
      nitrogen: Use unsigned long to specify the total RAM size

 MAINTAINERS                                        |    8 +
 Makefile                                           |    4 +-
 arch/arm/cpu/arm926ejs/config.mk                   |    2 +-
 arch/arm/cpu/arm926ejs/mxs/clock.c                 |    3 +-
 arch/arm/cpu/arm926ejs/mxs/mxs_init.h              |    2 +-
 arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   16 +-
 arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |    2 +-
 arch/arm/cpu/arm926ejs/mxs/timer.c                 |   39 +-
 arch/arm/cpu/armv7/Makefile                        |    2 +-
 arch/arm/cpu/armv7/config.mk                       |    2 +-
 arch/arm/cpu/armv7/mx6/Makefile                    |    1 -
 arch/arm/cpu/armv7/mx6/lowlevel_init.S             |   35 -
 arch/arm/cpu/armv7/mx6/soc.c                       |   16 +
 arch/arm/include/asm/arch-mx6/crm_regs.h           |   12 +
 arch/arm/include/asm/arch-mx6/imx-regs.h           |    8 +
 arch/arm/include/asm/arch-mx6/iomux.h              |    5 +
 arch/arm/include/asm/arch-mx6/mx6-ddr.h            |   85 +
 arch/arm/include/asm/arch-mx6/mx6-pins.h           |   31 +
 arch/arm/include/asm/arch-mx6/mx6dl-ddr.h          |   71 +
 arch/arm/include/asm/arch-mx6/mx6dl_pins.h         |  193 +--
 arch/arm/include/asm/arch-mx6/mx6q-ddr.h           |   69 +
 arch/arm/include/asm/arch-mx6/mx6q_pins.h          | 1671
++++++++++++++++++++
 arch/arm/include/asm/arch-mx6/mx6x_pins.h          | 1671
--------------------
 arch/arm/include/asm/arch-mx6/mxc_hdmi.h           | 1083 ++++++-------
 arch/arm/include/asm/arch-mxs/dma.h                |   19 +-
 arch/arm/include/asm/arch-mxs/imx-regs.h           |    2 +
 arch/arm/include/asm/arch-mxs/iomux.h              |    5 +
 arch/arm/include/asm/arch-mxs/regs-ssp.h           |   26 +
 arch/arm/include/asm/arch-mxs/regs-timrot.h        |  101 ++
 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg    |   58 +
 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg    |   58 +
 board/boundary/nitrogen6x/6x_bootscript.txt        |   63 +
 .../boundary/nitrogen6x/6x_bootscript_android.txt  |   64 +
 .../nitrogen6x/6x_bootscript_android_recovery.txt  |   64 +
 board/boundary/nitrogen6x/6x_upgrade.txt           |   45 +
 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg     |   58 +
 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg     |   58 +
 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg     |   57 +
 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg     |   58 +
 board/boundary/nitrogen6x/Makefile                 |   41 +
 board/boundary/nitrogen6x/README                   |   92 ++
 board/boundary/nitrogen6x/clocks.cfg               |   46 +
 board/boundary/nitrogen6x/ddr-setup.cfg            |  112 ++
 board/boundary/nitrogen6x/nitrogen6dl.cfg          |   45 +
 board/boundary/nitrogen6x/nitrogen6dl2g.cfg        |   45 +
 board/boundary/nitrogen6x/nitrogen6q.cfg           |   45 +
 board/boundary/nitrogen6x/nitrogen6q2g.cfg         |   45 +
 board/boundary/nitrogen6x/nitrogen6s.cfg           |   45 +
 board/boundary/nitrogen6x/nitrogen6s1g.cfg         |   45 +
 board/boundary/nitrogen6x/nitrogen6x.c             |  895 +++++++++++
 board/denx/m28evk/m28evk.c                         |    4 +
 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg       |   10 +-
 board/freescale/mx23evk/spl_boot.c                 |   10 +
 board/freescale/mx6qarm2/mx6qarm2.c                |   78 +-
 board/freescale/mx6qsabreauto/mx6qsabreauto.c      |   60 +-
 board/freescale/mx6qsabrelite/mx6qsabrelite.c      |  292 ++--
 board/freescale/mx6qsabresd/mx6qsabresd.c          |  102 +-
 board/olimex/mx23_olinuxino/mx23_olinuxino.c       |   13 +
 board/olimex/mx23_olinuxino/spl_boot.c             |    8 +
 boards.cfg                                         |    6 +
 common/cmd_led.c                                   |    6 +-
 common/cmd_sata.c                                  |    2 +-
 drivers/mmc/mxsmmc.c                               |   20 +-
 drivers/spi/mxs_spi.c                              |   39 +-
 drivers/usb/host/ehci-mx6.c                        |    1 -
 drivers/usb/host/ehci-mxs.c                        |  155 +-
 include/configs/apx4devkit.h                       |    3 +-
 include/configs/m28evk.h                           |    5 +-
 include/configs/mx23_olinuxino.h                   |   64 +-
 include/configs/mx23evk.h                          |   14 +-
 include/configs/mx28evk.h                          |    4 +-
 include/configs/mx6_common.h                       |   23 +
 include/configs/mx6qarm2.h                         |    3 +
 include/configs/mx6qsabre_common.h                 |    4 +
 include/configs/mx6qsabrelite.h                    |    4 +
 include/configs/nitrogen6x.h                       |  285 ++++
 include/configs/sc_sps_1.h                         |    3 +-
 77 files changed, 5683 insertions(+), 2758 deletions(-)
 delete mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6-pins.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6q-ddr.h
 create mode 100644 arch/arm/include/asm/arch-mx6/mx6q_pins.h
 delete mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
 create mode 100644 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/6x_bootscript.txt
 create mode 100644 board/boundary/nitrogen6x/6x_bootscript_android.txt
 create mode 100644
board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
 create mode 100644 board/boundary/nitrogen6x/6x_upgrade.txt
 create mode 100644 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg
 create mode 100644 board/boundary/nitrogen6x/Makefile
 create mode 100644 board/boundary/nitrogen6x/README
 create mode 100644 board/boundary/nitrogen6x/clocks.cfg
 create mode 100644 board/boundary/nitrogen6x/ddr-setup.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6dl.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6dl2g.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6q.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6q2g.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6s.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6s1g.cfg
 create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c
 create mode 100644 include/configs/mx6_common.h
 create mode 100644 include/configs/nitrogen6x.h


Best regards,
Stefano
Albert ARIBAUD - March 15, 2013, 6:51 p.m.
Hi Stefano,

On Fri, 15 Mar 2013 14:54:06 +0100, Stefano Babic <sbabic@denx.de>
wrote:

> Hi Albert,
> 
> here an update pull request after applying Fabio's fixes.
> 
> The following changes since commit 4cfc611b4a4ce009cfad46804bec2a1caad8e329:
> 
>   ARM: ns9750dev: remove remainders of dead board (2013-02-28 14:49:24
> +0100)
> 
> are available in the git repository at:
> 
>   git://www.denx.de/git/u-boot-imx.git master
> 
> for you to fetch changes up to 19a0f7fa271de0345bb2df90d443c547c41e8037:
> 
>   nitrogen: Use unsigned long to specify the total RAM size (2013-03-15
> 14:39:44 +0100)
> 
> ----------------------------------------------------------------
> Benoît Thébaudeau (6):
>       imx: mx6q DDR3 init: Fix tMRD
>       imx: mx6q DDR3 init: Fix tXPR
>       imx: mx6q DDR3 init: Fix SDE_to_RST
>       imx: mx6q DDR3 init: Fix RST_to_CKE
>       imx: mx6q DDR3 init: Fix MR0.PPD
>       imx: mx6q DDR3 init: Benefit from available CL = 7
> 
> Eric Nelson (8):
>       i.MX6Q: mx6qsabre*: Configure to allow CONFIG_SYS_ALT_MEMTEST
>       i.MX6: mx6qsabrelite: indent with tabs
>       i.MX6: consolidate pad names for multi-CPU boards
>       i.MX6: crm_regs: define CCM_CCGRx for use in board config files
>       i.MX6: crm_regs: define IOMUXC_GPR4/6/7
>       i.MX6DL: define IOMUX pads NANDF_CS1-3 for use as GPIO
>       i.MX6: Add DDR controller registers
>       Add Boundary Devices Nitrogen6X boards
> 
> Fabio Estevam (6):
>       mx6: Disable Power Down Bit of watchdog
>       mx23evk: Remove CONFIG_SYS_BAUDRATE_TABLE
>       mx23evk: Turn on caches
>       common: cmd_sata: Fix usage text for 'sata init'
>       mx6: Provide a structure for accessing HDMI registers
>       nitrogen6x: Fix RAM size variable
> 
> Fadil Berisha (2):
>       mxs: timrot: Add support to i.MX23
>       mxs: timrot: Rename local macros
> 
> Marek Vasut (7):
>       mxs: Reset the EMI block on mx23
>       mxs: mmc: spi: dma: Better wrap the MXS differences
>       mxs: spi: Fix the MXS SPI for mx23
>       mxs: spi: Remove CONFIG_MXS_SPI_DMA_ENABLE
>       mxs: Squash the header file usage in ehci-mxs
>       mxs: Make ehci-mxs multiport capable
>       mxs: m28: Enable power to USB port 0
> 
> Otavio Salvador (11):
>       build: imx: Fix 'u-boot.imx' build without full OBJTREE reference
>       mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to
> CONFIG_SPL_MXS_PSWITCH_WAIT
>       mx23: Document the tRAS lockout setting in memory initialization
>       mx23evk: Adjust DRAM control register to use full 128MB of RAM
>       led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set
>       mxs: Fix iomux.h to not break build during assembly stage
>       mx23_olinuxino: Add support for status LED
>       mx23evk: Enable USB support
>       mx23_olinuxino: Enable USB support
>       mx23_olinuxino: Add ethernet support
>       mx23_olinuxino: Fix warning for implicit declaration
> 
> Stefano Babic (3):
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
>       Merge branch 'master' of git://git.denx.de/u-boot-arm
>       USB: drop unneeded header in ehci-mx6
> 
> Stephen Warren (1):
>       ARM: mx6: use common CPU errata config options
> 
> fabio.estevam@freescale.com (1):
>       nitrogen: Use unsigned long to specify the total RAM size
> 
>  MAINTAINERS                                        |    8 +
>  Makefile                                           |    4 +-
>  arch/arm/cpu/arm926ejs/config.mk                   |    2 +-
>  arch/arm/cpu/arm926ejs/mxs/clock.c                 |    3 +-
>  arch/arm/cpu/arm926ejs/mxs/mxs_init.h              |    2 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c          |   16 +-
>  arch/arm/cpu/arm926ejs/mxs/spl_power_init.c        |    2 +-
>  arch/arm/cpu/arm926ejs/mxs/timer.c                 |   39 +-
>  arch/arm/cpu/armv7/Makefile                        |    2 +-
>  arch/arm/cpu/armv7/config.mk                       |    2 +-
>  arch/arm/cpu/armv7/mx6/Makefile                    |    1 -
>  arch/arm/cpu/armv7/mx6/lowlevel_init.S             |   35 -
>  arch/arm/cpu/armv7/mx6/soc.c                       |   16 +
>  arch/arm/include/asm/arch-mx6/crm_regs.h           |   12 +
>  arch/arm/include/asm/arch-mx6/imx-regs.h           |    8 +
>  arch/arm/include/asm/arch-mx6/iomux.h              |    5 +
>  arch/arm/include/asm/arch-mx6/mx6-ddr.h            |   85 +
>  arch/arm/include/asm/arch-mx6/mx6-pins.h           |   31 +
>  arch/arm/include/asm/arch-mx6/mx6dl-ddr.h          |   71 +
>  arch/arm/include/asm/arch-mx6/mx6dl_pins.h         |  193 +--
>  arch/arm/include/asm/arch-mx6/mx6q-ddr.h           |   69 +
>  arch/arm/include/asm/arch-mx6/mx6q_pins.h          | 1671
> ++++++++++++++++++++
>  arch/arm/include/asm/arch-mx6/mx6x_pins.h          | 1671
> --------------------
>  arch/arm/include/asm/arch-mx6/mxc_hdmi.h           | 1083 ++++++-------
>  arch/arm/include/asm/arch-mxs/dma.h                |   19 +-
>  arch/arm/include/asm/arch-mxs/imx-regs.h           |    2 +
>  arch/arm/include/asm/arch-mxs/iomux.h              |    5 +
>  arch/arm/include/asm/arch-mxs/regs-ssp.h           |   26 +
>  arch/arm/include/asm/arch-mxs/regs-timrot.h        |  101 ++
>  board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg    |   58 +
>  board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg    |   58 +
>  board/boundary/nitrogen6x/6x_bootscript.txt        |   63 +
>  .../boundary/nitrogen6x/6x_bootscript_android.txt  |   64 +
>  .../nitrogen6x/6x_bootscript_android_recovery.txt  |   64 +
>  board/boundary/nitrogen6x/6x_upgrade.txt           |   45 +
>  board/boundary/nitrogen6x/800mhz_2x128mx16.cfg     |   58 +
>  board/boundary/nitrogen6x/800mhz_2x256mx16.cfg     |   58 +
>  board/boundary/nitrogen6x/800mhz_4x128mx16.cfg     |   57 +
>  board/boundary/nitrogen6x/800mhz_4x256mx16.cfg     |   58 +
>  board/boundary/nitrogen6x/Makefile                 |   41 +
>  board/boundary/nitrogen6x/README                   |   92 ++
>  board/boundary/nitrogen6x/clocks.cfg               |   46 +
>  board/boundary/nitrogen6x/ddr-setup.cfg            |  112 ++
>  board/boundary/nitrogen6x/nitrogen6dl.cfg          |   45 +
>  board/boundary/nitrogen6x/nitrogen6dl2g.cfg        |   45 +
>  board/boundary/nitrogen6x/nitrogen6q.cfg           |   45 +
>  board/boundary/nitrogen6x/nitrogen6q2g.cfg         |   45 +
>  board/boundary/nitrogen6x/nitrogen6s.cfg           |   45 +
>  board/boundary/nitrogen6x/nitrogen6s1g.cfg         |   45 +
>  board/boundary/nitrogen6x/nitrogen6x.c             |  895 +++++++++++
>  board/denx/m28evk/m28evk.c                         |    4 +
>  board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg       |   10 +-
>  board/freescale/mx23evk/spl_boot.c                 |   10 +
>  board/freescale/mx6qarm2/mx6qarm2.c                |   78 +-
>  board/freescale/mx6qsabreauto/mx6qsabreauto.c      |   60 +-
>  board/freescale/mx6qsabrelite/mx6qsabrelite.c      |  292 ++--
>  board/freescale/mx6qsabresd/mx6qsabresd.c          |  102 +-
>  board/olimex/mx23_olinuxino/mx23_olinuxino.c       |   13 +
>  board/olimex/mx23_olinuxino/spl_boot.c             |    8 +
>  boards.cfg                                         |    6 +
>  common/cmd_led.c                                   |    6 +-
>  common/cmd_sata.c                                  |    2 +-
>  drivers/mmc/mxsmmc.c                               |   20 +-
>  drivers/spi/mxs_spi.c                              |   39 +-
>  drivers/usb/host/ehci-mx6.c                        |    1 -
>  drivers/usb/host/ehci-mxs.c                        |  155 +-
>  include/configs/apx4devkit.h                       |    3 +-
>  include/configs/m28evk.h                           |    5 +-
>  include/configs/mx23_olinuxino.h                   |   64 +-
>  include/configs/mx23evk.h                          |   14 +-
>  include/configs/mx28evk.h                          |    4 +-
>  include/configs/mx6_common.h                       |   23 +
>  include/configs/mx6qarm2.h                         |    3 +
>  include/configs/mx6qsabre_common.h                 |    4 +
>  include/configs/mx6qsabrelite.h                    |    4 +
>  include/configs/nitrogen6x.h                       |  285 ++++
>  include/configs/sc_sps_1.h                         |    3 +-
>  77 files changed, 5683 insertions(+), 2758 deletions(-)
>  delete mode 100644 arch/arm/cpu/armv7/mx6/lowlevel_init.S
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6-ddr.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6-pins.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6dl-ddr.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6q-ddr.h
>  create mode 100644 arch/arm/include/asm/arch-mx6/mx6q_pins.h
>  delete mode 100644 arch/arm/include/asm/arch-mx6/mx6x_pins.h
>  create mode 100644 board/boundary/nitrogen6x/1066mhz_4x128mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/6x_bootscript.txt
>  create mode 100644 board/boundary/nitrogen6x/6x_bootscript_android.txt
>  create mode 100644
> board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
>  create mode 100644 board/boundary/nitrogen6x/6x_upgrade.txt
>  create mode 100644 board/boundary/nitrogen6x/800mhz_2x128mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/800mhz_2x256mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/800mhz_4x128mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/800mhz_4x256mx16.cfg
>  create mode 100644 board/boundary/nitrogen6x/Makefile
>  create mode 100644 board/boundary/nitrogen6x/README
>  create mode 100644 board/boundary/nitrogen6x/clocks.cfg
>  create mode 100644 board/boundary/nitrogen6x/ddr-setup.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6dl.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6dl2g.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6q.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6q2g.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6s.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6s1g.cfg
>  create mode 100644 board/boundary/nitrogen6x/nitrogen6x.c
>  create mode 100644 include/configs/mx6_common.h
>  create mode 100644 include/configs/nitrogen6x.h
> 
> 
> Best regards,
> Stefano
> 

Applied to u-boot-arm/master, thanks!

Amicalement,
Otavio Salvador - March 15, 2013, 8:16 p.m.
Hi Stefano,

On Fri, Mar 15, 2013 at 3:51 PM, Albert ARIBAUD
<albert.u.boot@aribaud.net> wrote:
> Applied to u-boot-arm/master, thanks!

Could you please merge u-boot-arm/master back into u-boot-imx/master?
Stefano Babic - March 16, 2013, 11:16 a.m.
On 15/03/2013 21:16, Otavio Salvador wrote:
> Hi Stefano,
> 

Hi Otavio,

> On Fri, Mar 15, 2013 at 3:51 PM, Albert ARIBAUD
> <albert.u.boot@aribaud.net> wrote:
>> Applied to u-boot-arm/master, thanks!
> 
> Could you please merge u-boot-arm/master back into u-boot-imx/master?
> 

Done !

Regards,
Stefano