Patchwork [v8,21/24] hw/arm: add FTSDC010 MMC/SD controller support

login
register
mail settings
Submitter Kuo-Jung Su
Date March 15, 2013, 1:15 p.m.
Message ID <1363353336-11237-22-git-send-email-dantesu@gmail.com>
Download mbox | patch
Permalink /patch/227993/
State New
Headers show

Comments

Kuo-Jung Su - March 15, 2013, 1:15 p.m.
From: Kuo-Jung Su <dantesu@faraday-tech.com>

The FTSDC010 is a simple MMC/SD host controller and
many of its registers are similar to Arm PrimeCell PL181.

Signed-off-by: Kuo-Jung Su <dantesu@faraday-tech.com>
---
 hw/arm/Makefile.objs      |    1 +
 hw/arm/faraday_a369_soc.c |    7 +
 hw/arm/ftsdc010.c         |  354 +++++++++++++++++++++++++++++++++++++++++++++
 hw/arm/ftsdc010.h         |   90 ++++++++++++
 4 files changed, 452 insertions(+)
 create mode 100644 hw/arm/ftsdc010.c
 create mode 100644 hw/arm/ftsdc010.h

Patch

diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 9fdefc8..0920270 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -51,3 +51,4 @@  obj-y += ftssp010.o
 obj-y += ftgmac100.o
 obj-y += ftlcdc200.o
 obj-y += fttsc010.o
+obj-y += ftsdc010.o
diff --git a/hw/arm/faraday_a369_soc.c b/hw/arm/faraday_a369_soc.c
index 2177616..9b4eb7a 100644
--- a/hw/arm/faraday_a369_soc.c
+++ b/hw/arm/faraday_a369_soc.c
@@ -282,6 +282,13 @@  a369soc_device_init(FaradaySoCState *s)
 
     /* fttsc010 */
     sysbus_create_simple("fttsc010", 0x92400000, s->pic[19]);
+
+    /* ftsdc010 */
+    ds = sysbus_create_simple("ftsdc010", 0x90600000, s->pic[39]);
+    ack = qdev_get_gpio_in(ds, 0);
+    req = qdev_get_gpio_in(s->hdma[0], 13);
+    qdev_connect_gpio_out(s->hdma[0], 13, ack);
+    qdev_connect_gpio_out(ds, 0, req);
 }
 
 static void a369soc_realize(DeviceState *dev, Error **errp)
diff --git a/hw/arm/ftsdc010.c b/hw/arm/ftsdc010.c
new file mode 100644
index 0000000..e60e384
--- /dev/null
+++ b/hw/arm/ftsdc010.c
@@ -0,0 +1,354 @@ 
+/*
+ * QEMU model of the FTSDC010 MMC/SD Host Controller
+ *
+ * Copyright (C) 2012 Faraday Technology
+ * Written by Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is licensed under GNU GPL v2+.
+ */
+
+#include "hw/sysbus.h"
+#include "hw/sd.h"
+#include "sysemu/sysemu.h"
+#include "sysemu/blockdev.h"
+
+#include "ftsdc010.h"
+
+#define TYPE_FTSDC010   "ftsdc010"
+
+typedef struct Ftsdc010State {
+    SysBusDevice busdev;
+    MemoryRegion iomem;
+    SDState *card;
+    qemu_irq irq;
+
+    /* DMA hardware handshake */
+    qemu_irq req;
+
+    uint32_t datacnt;
+
+    /* HW register cache */
+    uint32_t cmd;
+    uint32_t arg;
+    uint32_t rsp[4];
+    uint32_t rspcmd;
+    uint32_t dcr;
+    uint32_t dtr;
+    uint32_t dlr;
+    uint32_t status;
+    uint32_t ier;
+    uint32_t pwr;
+    uint32_t clk;
+} Ftsdc010State;
+
+#define FTSDC010(obj) \
+    OBJECT_CHECK(Ftsdc010State, obj, TYPE_FTSDC010)
+
+static void ftsdc010_update_irq(Ftsdc010State *s)
+{
+    qemu_set_irq(s->irq, !!(s->ier & s->status));
+}
+
+static void ftsdc010_handle_ack(void *opaque, int line, int level)
+{
+    Ftsdc010State *s = FTSDC010(opaque);
+
+    if (!(s->dcr & DCR_DMA)) {
+        return;
+    }
+
+    if (level) {
+        qemu_set_irq(s->req, 0);
+    } else if (s->datacnt) {
+        qemu_set_irq(s->req, 1);
+    }
+}
+
+static void ftsdc010_send_command(Ftsdc010State *s)
+{
+    SDRequest request;
+    uint8_t response[16];
+    int rlen;
+
+    request.cmd = s->cmd & CMD_IDX;
+    request.arg = s->arg;
+
+    rlen = sd_do_command(s->card, &request, response);
+    if (rlen < 0) {
+        goto error;
+    }
+    if (s->cmd & CMD_WAIT_RSP) {
+#define RWORD(n) ((response[n] << 24) | (response[n + 1] << 16) \
+                  | (response[n + 2] << 8) | response[n + 3])
+        if (rlen == 0 || (rlen == 4 && (s->cmd & CMD_LONG_RSP))) {
+            goto error;
+        }
+        if (rlen != 4 && rlen != 16) {
+            goto error;
+        }
+        if (rlen == 4) {
+            s->rsp[0] = RWORD(0);
+            s->rsp[1] = s->rsp[2] = s->rsp[3] = 0;
+        } else {
+            s->rsp[3] = RWORD(0);
+            s->rsp[2] = RWORD(4);
+            s->rsp[1] = RWORD(8);
+            s->rsp[0] = RWORD(12) & ~1;
+        }
+        s->rspcmd  = (s->cmd & CMD_IDX);
+        s->rspcmd |= (s->cmd & CMD_APP) ? RSP_CMDAPP : 0;
+        s->status |= SR_RSP;
+#undef RWORD
+    } else {
+        s->status |= SR_CMD;
+    }
+
+    if ((s->dcr & DCR_DMA) && s->datacnt) {
+        qemu_set_irq(s->req, 1);
+    }
+
+    return;
+
+error:
+    s->status |= SR_RSP_TIMEOUT;
+}
+
+static void ftsdc010_chip_reset(Ftsdc010State *s)
+{
+    s->cmd = 0;
+    s->arg = 0;
+    s->rsp[0] = 0;
+    s->rsp[1] = 0;
+    s->rsp[2] = 0;
+    s->rsp[3] = 0;
+    s->rspcmd = 0;
+    s->dcr = 0;
+    s->dtr = 0;
+    s->dlr = 0;
+    s->datacnt = 0;
+    s->status &= ~(SR_CARD_REMOVED | SR_WPROT);
+    s->status |= SR_TXRDY | SR_RXRDY;
+    s->ier = 0;
+    s->pwr = 0;
+    s->clk = 0;
+}
+
+static uint64_t ftsdc010_mem_read(void *opaque, hwaddr addr, unsigned size)
+{
+    Ftsdc010State *s = FTSDC010(opaque);
+    uint32_t i, ret = 0;
+
+    switch (addr) {
+    case REG_SR:
+        return s->status;
+    case REG_DR:
+        if (!(s->dcr & DCR_WR) && s->datacnt && sd_data_ready(s->card)) {
+            for (i = 0; i < 4 && s->datacnt; i++, s->datacnt--) {
+                ret = deposit32(ret, i * 8, 8, sd_read_data(s->card));
+            }
+            if (!s->datacnt) {
+                s->status |= SR_DAT_END;
+            }
+            s->status |= SR_DAT;
+        }
+        break;
+    case REG_DCR:
+        return s->dcr;
+    case REG_DTR:
+        return s->dtr;
+    case REG_DLR:
+        return s->dlr;
+    case REG_CMD:
+        return s->cmd;
+    case REG_ARG:
+        return s->arg;
+    case REG_RSP0:
+        return s->rsp[0];
+    case REG_RSP1:
+        return s->rsp[1];
+    case REG_RSP2:
+        return s->rsp[2];
+    case REG_RSP3:
+        return s->rsp[3];
+    case REG_RSPCMD:
+        return s->rspcmd;
+    case REG_IER:
+        return s->ier;
+    case REG_PWR:
+        return s->pwr;
+    case REG_CLK:
+        return s->clk;
+    case REG_BUS:
+        return 0x00000009;  /* support 1-bit/4-bit bus */
+    case REG_FEAR:
+        return 0x00000010;  /* fifo = 16 */
+    case REG_REVR:
+        return 0x00030300;  /* rev. 3.3.0 */
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+            "ftsdc010: undefined memory access@%#" HWADDR_PRIx "\n", addr);
+        break;
+    }
+
+    return ret;
+}
+
+static void
+ftsdc010_mem_write(void *opaque, hwaddr addr, uint64_t val, unsigned size)
+{
+    int i;
+    Ftsdc010State *s = FTSDC010(opaque);
+
+    switch (addr) {
+    case REG_DR:
+        if ((s->dcr & DCR_WR) && s->datacnt) {
+            for (i = 0; i < 4 && s->datacnt; i++, s->datacnt--) {
+                sd_write_data(s->card, extract32((uint32_t)val, i * 8, 8));
+            }
+            if (!s->datacnt) {
+                s->status |= SR_DAT_END;
+            }
+            s->status |= SR_DAT;
+        }
+        break;
+    case REG_CMD:
+        s->cmd = (uint32_t)val;
+        if (s->cmd & CMD_RST) {
+            ftsdc010_chip_reset(s);
+        } else if (s->cmd & CMD_EN) {
+            s->cmd &= ~CMD_EN;
+            s->status &= ~(SR_CMD | SR_RSP | SR_RSP_ERR);
+            ftsdc010_send_command(s);
+        }
+        break;
+    case REG_ARG:
+        s->arg = (uint32_t)val;
+        break;
+    case REG_DCR:
+        s->dcr = (uint32_t)val;
+        if (s->dcr & DCR_EN) {
+            s->dcr &= ~(DCR_EN);
+            s->status &= ~(SR_DAT | SR_DAT_END | SR_DAT_ERR);
+            s->datacnt = s->dlr;
+        }
+        break;
+    case REG_DTR:
+        s->dtr = (uint32_t)val;
+        break;
+    case REG_DLR:
+        s->dlr = (uint32_t)val;
+        break;
+    case REG_SCR:
+        s->status &= ~((uint32_t)val & 0x14ff);
+        ftsdc010_update_irq(s);
+        break;
+    case REG_IER:
+        s->ier = (uint32_t)val;
+        ftsdc010_update_irq(s);
+        break;
+    case REG_PWR:
+        s->pwr = (uint32_t)val;
+        break;
+    case REG_CLK:
+        s->clk = (uint32_t)val;
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR,
+            "ftsdc010: undefined memory access@%#" HWADDR_PRIx "\n", addr);
+        break;
+    }
+}
+
+static const MemoryRegionOps mmio_ops = {
+    .read  = ftsdc010_mem_read,
+    .write = ftsdc010_mem_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 4
+    }
+};
+
+static void ftsdc010_reset(DeviceState *ds)
+{
+    Ftsdc010State *s = FTSDC010(SYS_BUS_DEVICE(ds));
+
+    ftsdc010_chip_reset(s);
+
+    sd_set_cb(s->card, NULL, NULL);
+
+    /* We can assume our GPIO outputs have been wired up now */
+    qemu_set_irq(s->req, 0);
+}
+
+static void ftsdc010_realize(DeviceState *dev, Error **errp)
+{
+    Ftsdc010State *s = FTSDC010(dev);
+    DriveInfo *dinfo;
+
+    memory_region_init_io(&s->iomem, &mmio_ops, s, TYPE_FTSDC010, 0x1000);
+    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
+    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+
+    qdev_init_gpio_in(&s->busdev.qdev, ftsdc010_handle_ack, 1);
+    qdev_init_gpio_out(&s->busdev.qdev, &s->req, 1);
+
+    dinfo = drive_get_next(IF_SD);
+    s->card = sd_init(dinfo ? dinfo->bdrv : NULL, 0);
+
+    s->status = SR_CARD_REMOVED;
+    if (dinfo) {
+        if (bdrv_is_read_only(dinfo->bdrv)) {
+            s->status |= SR_WPROT;
+        }
+        if (bdrv_is_inserted(dinfo->bdrv)) {
+            s->status &= ~SR_CARD_REMOVED;
+        }
+    }
+}
+
+static const VMStateDescription vmstate_ftsdc010 = {
+    .name = TYPE_FTSDC010,
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(cmd, Ftsdc010State),
+        VMSTATE_UINT32(arg, Ftsdc010State),
+        VMSTATE_UINT32_ARRAY(rsp, Ftsdc010State, 4),
+        VMSTATE_UINT32(rspcmd, Ftsdc010State),
+        VMSTATE_UINT32(dcr, Ftsdc010State),
+        VMSTATE_UINT32(dtr, Ftsdc010State),
+        VMSTATE_UINT32(dlr, Ftsdc010State),
+        VMSTATE_UINT32(datacnt, Ftsdc010State),
+        VMSTATE_UINT32(status, Ftsdc010State),
+        VMSTATE_UINT32(ier, Ftsdc010State),
+        VMSTATE_UINT32(pwr, Ftsdc010State),
+        VMSTATE_UINT32(clk, Ftsdc010State),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void ftsdc010_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->vmsd    = &vmstate_ftsdc010;
+    dc->reset   = ftsdc010_reset;
+    dc->realize = ftsdc010_realize;
+    dc->no_user = 1;
+}
+
+static const TypeInfo ftsdc010_info = {
+    .name           = TYPE_FTSDC010,
+    .parent         = TYPE_SYS_BUS_DEVICE,
+    .instance_size  = sizeof(Ftsdc010State),
+    .class_init     = ftsdc010_class_init,
+};
+
+static void ftsdc010_register_types(void)
+{
+    type_register_static(&ftsdc010_info);
+}
+
+type_init(ftsdc010_register_types)
diff --git a/hw/arm/ftsdc010.h b/hw/arm/ftsdc010.h
new file mode 100644
index 0000000..8aee9c3
--- /dev/null
+++ b/hw/arm/ftsdc010.h
@@ -0,0 +1,90 @@ 
+/*
+ * QEMU model of the FTSDC010 MMC/SD Host Controller
+ *
+ * Copyright (C) 2012 Faraday Technology
+ * Written by Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is licensed under GNU GPL v2+.
+ */
+
+#ifndef HW_ARM_FTSDC010_H
+#define HW_ARM_FTSDC010_H
+
+#include "qemu/bitops.h"
+
+/* sd controller register */
+#define REG_CMD                0x0000
+#define REG_ARG                0x0004
+#define REG_RSP0               0x0008    /* response */
+#define REG_RSP1               0x000C
+#define REG_RSP2               0x0010
+#define REG_RSP3               0x0014
+#define REG_RSPCMD             0x0018    /* responsed command */
+#define REG_DCR                0x001C    /* data control */
+#define REG_DTR                0x0020    /* data timeout */
+#define REG_DLR                0x0024    /* data length */
+#define REG_SR                 0x0028    /* status register */
+#define REG_SCR                0x002C    /* status clear register */
+#define REG_IER                0x0030    /* interrupt mask/enable register */
+#define REG_PWR                0x0034    /* power control */
+#define REG_CLK                0x0038    /* clock control */
+#define REG_BUS                0x003C    /* bus width */
+#define REG_DR                 0x0040    /* data register */
+#define REG_GPOR               0x0048    /* general purpose output register */
+#define REG_FEAR               0x009C    /* feature register */
+#define REG_REVR               0x00A0    /* revision register */
+
+/* bit mapping of command register */
+#define CMD_IDX                0x0000003F   /* command code */
+#define CMD_WAIT_RSP           0x00000040   /* 32-bit response */
+#define CMD_LONG_RSP           0x00000080   /* 128-bit response */
+#define CMD_APP                0x00000100   /* command is a ACMD */
+#define CMD_EN                 0x00000200   /* command enabled */
+#define CMD_RST                0x00000400   /* software reset */
+
+/* bit mapping of response command register */
+#define RSP_CMDIDX             0x0000003F
+#define RSP_CMDAPP             0x00000040
+
+/* bit mapping of data control register */
+#define DCR_BKSZ               0x0000000F
+#define DCR_WR                 0x00000010
+#define DCR_RD                 0x00000000
+#define DCR_DMA                0x00000020
+#define DCR_EN                 0x00000040
+#define DCR_THRES              0x00000080
+#define DCR_BURST1             0x00000000
+#define DCR_BURST4             0x00000100
+#define DCR_BURST8             0x00000200
+#define DCR_FIFO_RESET         0x00000400
+
+/* bit mapping of status register */
+#define SR_RSP_CRC            0x00000001
+#define SR_DAT_CRC            0x00000002
+#define SR_RSP_TIMEOUT        0x00000004
+#define SR_DAT_TIMEOUT        0x00000008
+#define SR_RSP_ERR            (SR_RSP_CRC | SR_RSP_TIMEOUT)
+#define SR_DAT_ERR            (SR_DAT_CRC | SR_DAT_TIMEOUT)
+#define SR_RSP                0x00000010
+#define SR_DAT                0x00000020
+#define SR_CMD                0x00000040
+#define SR_DAT_END            0x00000080
+#define SR_TXRDY              0x00000100
+#define SR_RXRDY              0x00000200
+#define SR_CARD_CHANGE        0x00000400
+#define SR_CARD_REMOVED       0x00000800
+#define SR_WPROT              0x00001000
+#define SR_SDIO               0x00010000
+#define SR_DAT0               0x00020000
+
+/* bit mapping of clock register */
+#define CLK_HISPD              0x00000200
+#define CLK_OFF                0x00000100
+#define CLK_SD                 0x00000080
+
+/* bit mapping of bus register */
+#define BUS_CARD_DATA3         0x00000020
+#define BUS_4BITS_SUPP         0x00000008
+#define BUS_8BITS_SUPP         0x00000010
+
+#endif