Patchwork [U-Boot,3/4,V3] S5P: Serial: Add fdt support to driver

login
register
mail settings
Submitter Rajeshwari Birje
Date March 15, 2013, 10:43 a.m.
Message ID <1363344188-6276-1-git-send-email-rajeshwari.s@samsung.com>
Download mbox | patch
Permalink /patch/227953/
State Changes Requested
Delegated to: Minkyu Kang
Headers show

Comments

Rajeshwari Birje - March 15, 2013, 10:43 a.m.
This patch adds FDT support to the serial s5p driver.
At present disabling the serial console (from the device tree) crashes
U-Boot. Add checks for this case, so that execution can continue without
a serial console.
It also enables the serial_s5p driver recognize the silent_console option.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Gabe Black <gabeblack@google.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
Changes in V2:
        - None
Changes in V3:
	- Moved driver config structure to data section. 
	- Changed silent_console to silent-console.
	- Did put a check for base address before doing fdt decoding.
 drivers/serial/serial_s5p.c |   78 +++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 78 insertions(+), 0 deletions(-)
Simon Glass - March 15, 2013, 8:28 p.m.
Hi Rajeshwari,

On Fri, Mar 15, 2013 at 3:43 AM, Rajeshwari Shinde
<rajeshwari.s@samsung.com> wrote:
> This patch adds FDT support to the serial s5p driver.
> At present disabling the serial console (from the device tree) crashes
> U-Boot. Add checks for this case, so that execution can continue without
> a serial console.
> It also enables the serial_s5p driver recognize the silent_console option.
>
> Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
> Signed-off-by: Gabe Black <gabeblack@google.com>
> Signed-off-by: Simon Glass <sjg@chromium.org>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>

This is a little limited in that we only have one port with FDT, but
that's all we need for now (perhaps forever). So it looks fine to me.

Acked-by: Simon Glass <sjg@chromium.org>

> ---
> Changes in V2:
>         - None
> Changes in V3:
>         - Moved driver config structure to data section.
>         - Changed silent_console to silent-console.
>         - Did put a check for base address before doing fdt decoding.
>  drivers/serial/serial_s5p.c |   78 +++++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 78 insertions(+), 0 deletions(-)
>

Patch

diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c
index 3c41242..55ef2bf 100644
--- a/drivers/serial/serial_s5p.c
+++ b/drivers/serial/serial_s5p.c
@@ -24,16 +24,28 @@ 
 #include <common.h>
 #include <linux/compiler.h>
 #include <asm/io.h>
+#include <fdtdec.h>
 #include <asm/arch/uart.h>
 #include <asm/arch/clk.h>
 #include <serial.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+/* Information about a serial port */
+struct fdt_serial {
+	u32 base_addr;  /* address of registers in physical memory */
+	u8 port_id;     /* uart port number */
+	u8 enabled;     /* 1 if enabled, 0 if disabled */
+} config __attribute__ ((section(".data")));
+
 static inline struct s5p_uart *s5p_get_base_uart(int dev_index)
 {
+#ifdef CONFIG_OF_CONTROL
+	return (struct s5p_uart *)(config.base_addr);
+#else
 	u32 offset = dev_index * sizeof(struct s5p_uart);
 	return (struct s5p_uart *)(samsung_get_base_uart() + offset);
+#endif
 }
 
 /*
@@ -69,6 +81,9 @@  void serial_setbrg_dev(const int dev_index)
 	u32 baudrate = gd->baudrate;
 	u32 val;
 
+	if (!config.enabled)
+		return;
+
 	val = uclk / baudrate;
 
 	writel(val / 16 - 1, &uart->ubrdiv);
@@ -87,6 +102,16 @@  int serial_init_dev(const int dev_index)
 {
 	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 
+#if defined(CONFIG_SILENT_CONSOLE) && \
+		defined(CONFIG_OF_CONTROL) && \
+		!defined(CONFIG_SPL_BUILD)
+	if (fdtdec_get_config_int(gd->fdt_blob, "silent_console", 0))
+		gd->flags |= GD_FLG_SILENT;
+#endif
+
+	if (!config.enabled)
+		return 0;
+
 	/* reset and enable FIFOs, set triggers to the maximum */
 	writel(0, &uart->ufcon);
 	writel(0, &uart->umcon);
@@ -129,6 +154,9 @@  int serial_getc_dev(const int dev_index)
 {
 	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 
+	if (!config.enabled)
+		return 0;
+
 	/* wait for character to arrive */
 	while (!(readl(&uart->utrstat) & 0x1)) {
 		if (serial_err_check(dev_index, 0))
@@ -145,6 +173,9 @@  void serial_putc_dev(const char c, const int dev_index)
 {
 	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 
+	if (!config.enabled)
+		return;
+
 	/* wait for room in the tx FIFO */
 	while (!(readl(&uart->utrstat) & 0x2)) {
 		if (serial_err_check(dev_index, 1))
@@ -165,6 +196,9 @@  int serial_tstc_dev(const int dev_index)
 {
 	struct s5p_uart *const uart = s5p_get_base_uart(dev_index);
 
+	if (!config.enabled)
+		return 0;
+
 	return (int)(readl(&uart->utrstat) & 0x1);
 }
 
@@ -207,8 +241,51 @@  DECLARE_S5P_SERIAL_FUNCTIONS(3);
 struct serial_device s5p_serial3_device =
 	INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3");
 
+#ifdef CONFIG_OF_CONTROL
+int fdtdec_decode_console(int *index, struct fdt_serial *uart)
+{
+	const void *blob = gd->fdt_blob;
+	int node;
+
+	node = fdt_path_offset(blob, "console");
+	if (node < 0)
+		return node;
+
+	uart->base_addr = fdtdec_get_addr(blob, node, "reg");
+	if (uart->base_addr == FDT_ADDR_T_NONE)
+		return -FDT_ERR_NOTFOUND;
+
+	uart->port_id = fdtdec_get_int(blob, node, "id", -1);
+	uart->enabled = fdtdec_get_is_enabled(blob, node);
+
+	return 0;
+}
+#endif
+
 __weak struct serial_device *default_serial_console(void)
 {
+#ifdef CONFIG_OF_CONTROL
+	int index = 0;
+
+	if ((!config.base_addr) && (fdtdec_decode_console(&index, &config))) {
+		debug("Cannot decode default console node\n");
+		return NULL;
+	}
+
+	if (config.port_id == 0)
+		return &s5p_serial0_device;
+	else if (config.port_id == 1)
+		return &s5p_serial1_device;
+	else if (config.port_id == 2)
+		return &s5p_serial2_device;
+	else if (config.port_id == 3)
+		return &s5p_serial3_device;
+	else
+		debug("Unknown config.port_id: %d", config.port_id);
+
+	return NULL;
+#else
+	config.enabled = 1;
 #if defined(CONFIG_SERIAL0)
 	return &s5p_serial0_device;
 #elif defined(CONFIG_SERIAL1)
@@ -220,6 +297,7 @@  __weak struct serial_device *default_serial_console(void)
 #else
 #error "CONFIG_SERIAL? missing."
 #endif
+#endif
 }
 
 void s5p_serial_initialize(void)