From patchwork Thu Mar 14 20:58:12 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Nishanth Menon X-Patchwork-Id: 227802 Return-Path: X-Original-To: incoming-imx@patchwork.ozlabs.org Delivered-To: patchwork-incoming-imx@bilbo.ozlabs.org Received: from merlin.infradead.org (merlin.infradead.org [IPv6:2001:4978:20e::2]) (using TLSv1.2 with cipher DHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id A5B172C00CE for ; Fri, 15 Mar 2013 08:05:59 +1100 (EST) Received: from localhost ([::1] helo=merlin.infradead.org) by merlin.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1UGFHx-0003gE-61; Thu, 14 Mar 2013 21:02:13 +0000 Received: from arroyo.ext.ti.com ([192.94.94.40]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UGFEp-0002AT-15 for linux-arm-kernel@lists.infradead.org; Thu, 14 Mar 2013 20:59:11 +0000 Received: from dlelxv30.itg.ti.com ([172.17.2.17]) by arroyo.ext.ti.com (8.13.7/8.13.7) with ESMTP id r2EKwtlK000367; Thu, 14 Mar 2013 15:58:55 -0500 Received: from DFLE73.ent.ti.com (dfle73.ent.ti.com [128.247.5.110]) by dlelxv30.itg.ti.com (8.13.8/8.13.8) with ESMTP id r2EKwsTC008761; Thu, 14 Mar 2013 15:58:55 -0500 Received: from dlelxv22.itg.ti.com (172.17.1.197) by dfle73.ent.ti.com (128.247.5.110) with Microsoft SMTP Server id 14.1.323.3; Thu, 14 Mar 2013 15:58:54 -0500 Received: from localhost (kahuna.am.dhcp.ti.com [128.247.75.12]) by dlelxv22.itg.ti.com (8.13.8/8.13.8) with ESMTP id r2EKwsi9023957; Thu, 14 Mar 2013 15:58:54 -0500 From: Nishanth Menon To: Subject: [PATCH 5/8] ARM: dts: omap4-panda: move generic sections to panda-common Date: Thu, 14 Mar 2013 15:58:12 -0500 Message-ID: <1363294695-658-6-git-send-email-nm@ti.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1363294695-658-1-git-send-email-nm@ti.com> References: <1363294695-658-1-git-send-email-nm@ti.com> MIME-Version: 1.0 X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20130314_165859_460427_5C269D63 X-CRM114-Status: GOOD ( 13.20 ) X-Spam-Score: -9.3 (---------) X-Spam-Report: SpamAssassin version 3.3.2 on merlin.infradead.org summary: Content analysis details: (-9.3 points) pts rule name description ---- ---------------------- -------------------------------------------------- -5.0 RCVD_IN_DNSWL_HI RBL: Sender listed at http://www.dnswl.org/, high trust [192.94.94.40 listed in list.dnswl.org] -0.0 SPF_PASS SPF: sender matches SPF record -2.4 RP_MATCHES_RCVD Envelope sender domain matches handover relay domain -1.9 BAYES_00 BODY: Bayes spam probability is 0 to 1% [score: 0.0000] Cc: Nishanth Menon , =?UTF-8?q?Beno=C3=AEt=20Cousson?= , linux-pm@vger.kernel.org, Kevin Hilman , Keerthy , devicetree-discuss@lists.ozlabs.org, cpufreq@vger.kernel.org, Santosh Shilimkar , Shawn Guo , linux-arm-kernel@lists.infradead.org X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.15 Precedence: list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org List-Id: linux-imx-kernel.lists.patchwork.ozlabs.org PandaBoard, PandaBoard-A4 revisions use OMAP4430. PandaBoard-ES version of the board uses OMAP4460. Move the original panda dts file into a common dtsi used by all panda variants. This allows us to introduce SoC variation for PandaBoard ES without impacting other PandaBoard versions that are supported. Cc: Kevin Hilman Cc: "Benoît Cousson" Cc: Santosh Shilimkar Cc: Shawn Guo Cc: Keerthy Cc: linux-omap@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: cpufreq@vger.kernel.org Cc: linux-pm@vger.kernel.org Signed-off-by: Nishanth Menon --- NOTE: even though this patch was generated with -M, the diff might be a bit confusing. arch/arm/boot/dts/omap4-panda-a4.dts | 5 +- arch/arm/boot/dts/omap4-panda-common.dtsi | 205 +++++++++++++++++++++++++++++ arch/arm/boot/dts/omap4-panda-es.dts | 5 +- arch/arm/boot/dts/omap4-panda.dts | 200 +--------------------------- 4 files changed, 215 insertions(+), 200 deletions(-) create mode 100644 arch/arm/boot/dts/omap4-panda-common.dtsi diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts index 75466d2..f89b0ee 100644 --- a/arch/arm/boot/dts/omap4-panda-a4.dts +++ b/arch/arm/boot/dts/omap4-panda-a4.dts @@ -5,7 +5,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/include/ "omap4-panda.dts" +/dts-v1/; + +/include/ "omap4.dtsi" +/include/ "omap4-panda-common.dtsi" /* Pandaboard Rev A4+ have external pullups on SCL & SDA */ &dss_hdmi_pins { diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi new file mode 100644 index 0000000..3a22e09 --- /dev/null +++ b/arch/arm/boot/dts/omap4-panda-common.dtsi @@ -0,0 +1,205 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "elpida_ecb240abacn.dtsi" + +/ { + model = "TI OMAP4 PandaBoard"; + compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "pandaboard::status1"; + gpios = <&gpio1 7 0>; + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "pandaboard::status2"; + gpios = <&gpio1 8 0>; + linux,default-trigger = "mmc0"; + }; + }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "PandaBoard"; + + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; +}; + +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &mcbsp1_pins + &dss_hdmi_pins + &tpd12s015_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ + 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ + 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ + 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ + 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ + 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ + 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ + 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ + 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + >; + }; + + dss_hdmi_pins: pinmux_dss_hdmi_pins { + pinctrl-single,pins = < + 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ + 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ + 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ + >; + }; + + tpd12s015_pins: pinmux_tpd12s015_pins { + pinctrl-single,pins = < + 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ + 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ + 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ + >; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <100000>; + + /* + * Display monitor features are burnt in their EEPROM as EDID data. + * The EEPROM is connected as I2C slave device. + */ + eeprom@50 { + compatible = "ti,eeprom"; + reg = <0x50>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + bus-width = <8>; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + ti,non-removable; + bus-width = <4>; +}; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&mcbsp2 { + status = "disabled"; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&dmic { + status = "disabled"; +}; + +&twl_usb_comparator { + usb-supply = <&vusb>; +}; diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts index 73bc1a6..6422d7c 100644 --- a/arch/arm/boot/dts/omap4-panda-es.dts +++ b/arch/arm/boot/dts/omap4-panda-es.dts @@ -5,7 +5,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -/include/ "omap4-panda.dts" +/dts-v1/; + +/include/ "omap4.dtsi" +/include/ "omap4-panda-common.dtsi" /* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ &sound { diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 4122efe..eeaaefd 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * Copyright (C) 2011-13 Texas Instruments Incorporated - http://www.ti.com/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -8,201 +8,5 @@ /dts-v1/; /include/ "omap4.dtsi" -/include/ "elpida_ecb240abacn.dtsi" +/include/ "omap4-panda-common.dtsi" -/ { - model = "TI OMAP4 PandaBoard"; - compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4"; - - memory { - device_type = "memory"; - reg = <0x80000000 0x40000000>; /* 1 GB */ - }; - - leds { - compatible = "gpio-leds"; - heartbeat { - label = "pandaboard::status1"; - gpios = <&gpio1 7 0>; - linux,default-trigger = "heartbeat"; - }; - - mmc { - label = "pandaboard::status2"; - gpios = <&gpio1 8 0>; - linux,default-trigger = "mmc0"; - }; - }; - - sound: sound { - compatible = "ti,abe-twl6040"; - ti,model = "PandaBoard"; - - ti,mclk-freq = <38400000>; - - ti,mcpdm = <&mcpdm>; - - ti,twl6040 = <&twl6040>; - - /* Audio routing */ - ti,audio-routing = - "Headset Stereophone", "HSOL", - "Headset Stereophone", "HSOR", - "Ext Spk", "HFL", - "Ext Spk", "HFR", - "Line Out", "AUXL", - "Line Out", "AUXR", - "HSMIC", "Headset Mic", - "Headset Mic", "Headset Mic Bias", - "AFML", "Line In", - "AFMR", "Line In"; - }; -}; - -&omap4_pmx_core { - pinctrl-names = "default"; - pinctrl-0 = < - &twl6040_pins - &mcpdm_pins - &mcbsp1_pins - &dss_hdmi_pins - &tpd12s015_pins - >; - - twl6040_pins: pinmux_twl6040_pins { - pinctrl-single,pins = < - 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ - 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ - >; - }; - - mcpdm_pins: pinmux_mcpdm_pins { - pinctrl-single,pins = < - 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ - 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ - 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ - 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ - 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ - >; - }; - - mcbsp1_pins: pinmux_mcbsp1_pins { - pinctrl-single,pins = < - 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ - 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ - 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ - 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ - >; - }; - - dss_hdmi_pins: pinmux_dss_hdmi_pins { - pinctrl-single,pins = < - 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */ - 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */ - 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */ - >; - }; - - tpd12s015_pins: pinmux_tpd12s015_pins { - pinctrl-single,pins = < - 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */ - 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */ - 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */ - >; - }; -}; - -&i2c1 { - clock-frequency = <400000>; - - twl: twl@48 { - reg = <0x48>; - /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ - interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-parent = <&gic>; - }; - - twl6040: twl@4b { - compatible = "ti,twl6040"; - reg = <0x4b>; - /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ - interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ - interrupt-parent = <&gic>; - ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ - - vio-supply = <&v1v8>; - v2v1-supply = <&v2v1>; - enable-active-high; - }; -}; - -/include/ "twl6030.dtsi" - -&i2c2 { - clock-frequency = <400000>; -}; - -&i2c3 { - clock-frequency = <100000>; - - /* - * Display monitor features are burnt in their EEPROM as EDID data. - * The EEPROM is connected as I2C slave device. - */ - eeprom@50 { - compatible = "ti,eeprom"; - reg = <0x50>; - }; -}; - -&i2c4 { - clock-frequency = <400000>; -}; - -&mmc1 { - vmmc-supply = <&vmmc>; - bus-width = <8>; -}; - -&mmc2 { - status = "disabled"; -}; - -&mmc3 { - status = "disabled"; -}; - -&mmc4 { - status = "disabled"; -}; - -&mmc5 { - ti,non-removable; - bus-width = <4>; -}; - -&emif1 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&emif2 { - cs1-used; - device-handle = <&elpida_ECB240ABACN>; -}; - -&mcbsp2 { - status = "disabled"; -}; - -&mcbsp3 { - status = "disabled"; -}; - -&dmic { - status = "disabled"; -}; - -&twl_usb_comparator { - usb-supply = <&vusb>; -};