diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log
index 05367d6..27fecfd 100644
--- a/klog-0001/klog-0001.log
+++ b/klog-0001/klog-0001.log
@@ -1,4 +1,4 @@
-klog            Scan kernel log for errors and warnings.
+klog            klog: Scan kernel log for errors and warnings.
 klog            ----------------------------------------------------------
 klog            Test 1 of 1: Kernel log error check.
 klog            FAILED [HIGH] KlogAcpiMultipleApicMadtFound: Test 1, HIGH
@@ -3068,16 +3068,30 @@ klog            message: [ 0.101946] ACPI Error: Method parse/execution
 klog            failed [_SB_.MEM_._CRS] (Node f442af60),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 0.101953] ACPI Error: Method execution failed
 klog            [_SB_.MEM_._CRS] (Node f442af60), AE_AML_BUFFER_LIMIT
 klog            (20110112/uteval-103)
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.102803] ACPI Warning: Incorrect
@@ -3287,16 +3301,30 @@ klog            message: [ 0.136600] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS]
 klog            (Node dd8159d8), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 0.136637] ACPI Error (uteval-0250): Method
 klog            execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node
 klog            dd8159d8), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.137394] ACPI Warning: Incorrect
@@ -3328,9 +3356,10 @@ klog            Kernel message: [ 0.150000] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
 klog            ffff880137e47618), AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.150000] ACPI Error: No handler for
@@ -3462,9 +3491,10 @@ klog            Kernel message: [ 0.166336] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
 klog            (Node f7021bb8), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.166808] ACPI Error: No handler for
@@ -3480,18 +3510,20 @@ klog            Kernel message: [ 0.166808] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.HTEV] (Node f701be10),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.166808] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
 klog            (Node f7024d08), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
 klog            Kernel message: [ 0.169111] ACPI Error: [HPTF] Namespace
@@ -3629,9 +3661,10 @@ klog            Kernel message: [ 0.172880] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
 klog            (Node f70159f0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.173062] ACPI Warning: Incorrect
@@ -3700,18 +3733,20 @@ klog            Kernel message: [ 0.175394] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_PR_.CPU0._OSC] (Node
 klog            f7025558), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.175428] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_PR_.CPU0._PDC] (Node
 klog            f7025540), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
 klog            1, HIGH Kernel message: [ 0.175892] ACPI Warning: Package
@@ -3840,72 +3875,80 @@ klog            Kernel message: [ 0.178434] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            f7072000), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.178458] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node f7072000),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.178486] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            f70720a8), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.178510] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node f70720a8),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.178539] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            f7072210), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.178563] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node f7072210),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.178590] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            f70722b8), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.178614] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node f70722b8),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.179475] ACPI Warning: Incorrect
@@ -4026,72 +4069,80 @@ klog            Kernel message: [ 0.183734] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            f70c4180), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.183755] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node f70c4180),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.183773] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            f70c4240), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.183793] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node f70c4240),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.183812] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            f70c43c0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.183832] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node f70c43c0),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.183850] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            f70c4480), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.183870] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node f70c4480),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.183948] ACPI Warning: Incorrect
@@ -4460,9 +4511,10 @@ klog            Kernel message: [ 0.197451] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.SBRG.EC__._REG]
 klog            (Node f701e2a0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.198490] ACPI Warning: Incorrect
@@ -4674,9 +4726,10 @@ klog            Kernel message: [ 0.211938] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
 klog            (Node ee423708), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.212633] ACPI Warning: Incorrect
@@ -4824,72 +4877,80 @@ klog            Kernel message: [ 0.219977] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            f701ba38), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.220034] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node f701ba38),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.220068] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            f701baf8), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.220107] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node f701baf8),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.220142] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            f701bc78), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.220180] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node f701bc78),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.220213] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            f701bd38), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.220252] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node f701bd38),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
 klog            message: [ 0.221153] ACPI Error: Method parse/execution
@@ -4951,16 +5012,30 @@ klog            message: [ 0.222987] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
 klog            f7015900), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 0.223020] ACPI Error (uteval-0250): Method
 klog            execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
 klog            f7015900), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.223245] ACPI Warning: Incorrect
@@ -5012,16 +5087,30 @@ klog            message: [ 0.224994] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.MEM_._CRS] (Node f7021990),
 klog            AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 0.225018] ACPI Error (uteval-0250): Method
 klog            execution failed [_SB_.MEM_._CRS] (Node f7021990),
 klog            AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.226224] ACPI Warning: Incorrect
@@ -5348,9 +5437,10 @@ klog            Kernel message: [ 0.250019] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.SBRG.EC__._REG] (Node
 klog            f4425bb8), AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
 klog            Kernel message: [ 0.250572] ACPI Error (psparse-0537):
@@ -5575,72 +5665,80 @@ klog            Kernel message: [ 0.272435] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            f7102150), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.272452] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node f7102150),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.272469] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            f71021f8), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.272486] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node f71021f8),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.272503] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            f7102360), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.272519] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node f7102360),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.272536] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            f7102408), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.272552] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node f7102408),
 klog            AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.279154] ACPI Warning: Incorrect
@@ -5947,18 +6045,20 @@ klog            Kernel message: [ 0.316829] ACPI Error: Method parse
 klog            /execution failed [_SB_.HTEV] (Node ffff88007a730780),
 klog            AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.316839] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
 klog            ffff88007a73a078), AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.317152] ACPI Warning: Incorrect
@@ -6035,18 +6135,20 @@ klog            Kernel message: [ 0.322886] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPCB.SNC_.SBRT] (Node
 klog            f7435228), AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.322899] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
 klog            f7428d98), AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.323465] ACPI Warning: Incorrect
@@ -6079,36 +6181,40 @@ klog            Kernel message: [ 0.325334] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.LPCB.KBC0.SMWR]
 klog            (Node ffff88007d32c8c0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.325357] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_TZ_.THRM.SFAN] (Node
 klog            ffff88007d328ec0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.325376] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_TZ_.THRM.THCK] (Node
 klog            ffff88007d328f40), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.325396] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_GPE._L02] (Node
 klog            ffff88007d3289c0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
 klog            Kernel message: [ 0.325630] ACPI Error: Could not enable
@@ -6210,72 +6316,80 @@ klog            Kernel message: [ 0.330496] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            ffff88011bf0d360), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.330513] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node
 klog            ffff88011bf0d360), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.330528] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            ffff88011bf0d460), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.330545] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node
 klog            ffff88011bf0d460), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.330560] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            ffff88011bf0d660), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.330576] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node
 klog            ffff88011bf0d660), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.330590] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            ffff88011bf0d760), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.330606] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node
 klog            ffff88011bf0d760), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
 klog            Kernel message: [ 0.330759] ACPI Error (psparse-0537):
@@ -6376,18 +6490,20 @@ klog            Kernel message: [ 0.333300] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.HTEV] (Node
 klog            ffff8800bc62e600), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.333326] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
 klog            (Node ffff8800bc63e9a0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 0.333559] ACPI Error: No handler for
@@ -6403,9 +6519,10 @@ klog            Kernel message: [ 0.333573] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.HTEV] (Node
 klog            ffff88007db28600), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.333591] ACPI Warning: Incorrect
@@ -6421,9 +6538,10 @@ klog            Kernel message: [ 0.333601] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
 klog            (Node ffff88007db309a0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
 klog            HIGH Kernel message: [ 0.333734] ACPI Warning for
@@ -6492,9 +6610,10 @@ klog            Kernel message: [ 0.335698] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
 klog            ffff88007af36730), AE_NOT_EXIST (20110413/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.335745] ACPI Warning: Incorrect
@@ -6563,9 +6682,10 @@ klog            Kernel message: [ 0.338717] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D0._STA] (Node
 klog            ffff88012bb111a0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.338801] ACPI Warning: Incorrect
@@ -6581,27 +6701,30 @@ klog            Kernel message: [ 0.338905] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D0._STA] (Node
 klog            ffff88012bb111a0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.339363] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [PRID.P_D1._STA] (Node
 klog            ffff88012bb11280), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.339551] ACPI Error (uteval-0250):
 klog            Method execution failed [PRID.P_D1._STA] (Node
 klog            ffff88012bb11280), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.339584] ACPI Warning: Incorrect
@@ -6635,9 +6758,10 @@ klog            Kernel message: [ 0.340003] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D0._STA] (Node
 klog            ffff88012bb11460), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.340121] ACPI Warning: Incorrect
@@ -6653,27 +6777,30 @@ klog            Kernel message: [ 0.340193] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D0._STA] (Node
 klog            ffff88012bb11460), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.340651] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [SECD.S_D1._STA] (Node
 klog            ffff88012bb11540), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.340838] ACPI Error (uteval-0250):
 klog            Method execution failed [SECD.S_D1._STA] (Node
 klog            ffff88012bb11540), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.341276] ACPI Warning: Incorrect
@@ -6716,9 +6843,10 @@ klog            Kernel message: [ 0.342116] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
 klog            (Node f742f228), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
 klog            Kernel message: [ 0.342130] ACPI Error (psparse-0537):
@@ -6743,9 +6871,10 @@ klog            Kernel message: [ 0.342409] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
 klog            (Node f7422d98), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.342985] ACPI Warning: Incorrect
@@ -6897,9 +7026,10 @@ klog            Kernel message: [ 0.353215] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
 klog            (Node ffff88013be520e0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.353356] ACPI Warning: Incorrect
@@ -6995,18 +7125,20 @@ klog            Kernel message: [ 0.356119] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [P8XH] (Node
 klog            ffff88013ba28020), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.356143] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_GPE._L02] (Node
 klog            ffff88013ba32120), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.356280] ACPI Warning: Incorrect
@@ -7340,18 +7472,20 @@ klog            Kernel message: [ 0.376106] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_PR_.CPU0._OSC] (Node
 klog            ffff88007cf3f440), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.376141] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_PR_.CPU0._PDC] (Node
 klog            ffff88007cf3f420), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
 klog            Kernel message: [ 0.376733] ACPI Error: Method parse
@@ -7591,16 +7725,30 @@ klog            message: [ 0.399996] ACPI Error: Method parse/execution
 klog            failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 0.400012] ACPI Error: Method execution failed
 klog            [_SB_.MEM_._CRS] (Node ffff8800b8e38000),
 klog            AE_AML_BUFFER_LIMIT (20110112/uteval-103)
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.400212] ACPI Warning: Incorrect
@@ -7724,16 +7872,30 @@ klog            message: [ 0.420248] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
 klog            ffff88013142fac0), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 0.420284] ACPI Error (uteval-0250): Method
 klog            execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
 klog            ffff88013142fac0), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.420323] ACPI Warning: Incorrect
@@ -8311,18 +8473,20 @@ klog            Kernel message: [ 0.539149] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPCB.SNC_.SBRT] (Node
 klog            ffff88012fa4f398), AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.539161] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
 klog            ffff88012fa396b8), AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
 klog            Kernel message: [ 0.540036] ACPI Error: [_PR_.C002._PPC]
@@ -8455,16 +8619,30 @@ klog            message: [ 0.591729] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.MEM_._CRS] (Node
 klog            ffff8800b4040f60), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 0.591760] ACPI Error (uteval-0250): Method
 klog            execution failed [_SB_.MEM_._CRS] (Node ffff8800b4040f60),
 klog            AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
 klog            message: [ 0.593045] ACPI Error (psparse-0537): Method
@@ -9313,16 +9491,30 @@ klog            message: [ 0.744114] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.MEM_._CRS] (Node
 klog            ffff88013ba44cc0), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 0.744142] ACPI Error (uteval-0250): Method
 klog            execution failed [_SB_.MEM_._CRS] (Node ffff88013ba44cc0),
 klog            AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 0.755111] ACPI Warning: Incorrect
@@ -9741,18 +9933,20 @@ klog            Kernel message: [ 0.890421] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
 klog            (Node ffff880133a49620), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 0.890696] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
 klog            (Node ffff880133a385e0), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
 klog            message: [ 0.892097] ACPI Error (psparse-0537): Method
@@ -10123,18 +10317,20 @@ klog            Kernel message: [ 1.027587] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [_SB_.PCI0.DOCK._STA] (Node
 klog            ffff880133e48620), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 1.027653] ACPI Error (uteval-0250):
 klog            Method execution failed [_SB_.PCI0.DOCK._STA] (Node
 klog            ffff880133e48620), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [CRITICAL] KlogAcpiNoValidCrt: Test 1, CRITICAL
 klog            Kernel message: [ 1.125427] [Firmware Bug]: No valid trip
@@ -10452,18 +10648,20 @@ klog            Kernel message: [ 1.246169] ACPI Error: Method parse
 klog            /execution failed [_TZ_.RDEC] (Node f442fc60),
 klog            AE_NOT_EXIST (20110413/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 1.246176] ACPI Error: Method parse
 klog            /execution failed [_TZ_.TZS0._TMP] (Node f442fca8),
 klog            AE_NOT_EXIST (20110413/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
 klog            message: [ 1.270260] ACPI Error (psparse-0537): Method
@@ -10506,18 +10704,20 @@ klog            Kernel message: [ 1.272407] ACPI Error: Method parse
 klog            /execution failed [_TZ_.RDEC] (Node f742fc60),
 klog            AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 1.272415] ACPI Error: Method parse
 klog            /execution failed [_TZ_.TZS0._TMP] (Node f742fca8),
 klog            AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
 klog            Kernel message: [ 1.280955] ACPI Error: No handler for
@@ -10533,9 +10733,10 @@ klog            Kernel message: [ 1.280965] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [J380._STA] (Node
 klog            ffff88013712b380), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
 klog            Kernel message: [ 1.314561] ACPI Error: [ECPU] Namespace
@@ -10579,9 +10780,10 @@ klog            Kernel message: [ 1.337975] ACPI Error (uteval-0250):
 klog            Method execution failed [J380._STA] (Node
 klog            ffff88013712b380), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
 klog            CRITICAL Kernel message: [ 1.371174] ACPI Error: Field
@@ -10874,9 +11076,10 @@ klog            Kernel message: [ 1.570624] ACPI Error (psparse-0537):
 klog            Method parse/execution failed [J380._STA] (Node
 klog            ffff8801b916ea40), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
 klog            MEDIUM Kernel message: [ 1.586563] ACPI Warning: Incorrect
@@ -10988,9 +11191,10 @@ klog            Kernel message: [ 1.662849] ACPI Error (uteval-0250):
 klog            Method execution failed [J380._STA] (Node
 klog            ffff8801b916ea40), AE_NOT_EXIST
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
 klog            1, HIGH Kernel message: [ 1.678325] ACPI Error: Needed
@@ -12472,16 +12676,30 @@ klog            message: [ 3.490832] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.PMI0._GHL] (Node
 klog            ffff88013bc2bdc0), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 3.490852] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.PMI0._PMC] (Node
 klog            ffff88013bc2bd40), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
 klog            Kernel message: [ 3.502273] ACPI Error: Could not enable
@@ -12737,9 +12955,10 @@ klog            Kernel message: [ 4.576437] ACPI Error: Method parse
 klog            /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
 klog            f48326d8), AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
 klog            Kernel message: [ 4.638115] ACPI Error: Method parse
@@ -12933,18 +13152,20 @@ klog            Kernel message: [ 7.365161] ACPI Error: Method parse
 klog            /execution failed [_SB_.PMI0._GHL] (Node ffff8805ffa36b18)
 klog            , AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
 klog            Kernel message: [ 7.365181] ACPI Error: Method parse
 klog            /execution failed [_SB_.PMI0._PMC] (Node ffff8805ffa36a78)
 klog            , AE_NOT_EXIST (20110112/psparse-536)
 klog            
-klog            ADVICE: This is a bug picked up by the kernel, but as yet,
-klog            the firmware test suite has no diagnostic advice for this
-klog            particular problem.
+klog            ADVICE: The ACPI interpreter failed to execute or parse
+klog            some AML because a object or control did not exist. This
+klog            normally occurs because of buggy firmware and may lead to
+klog            unexpected behaviour or loss of functionality.
 klog            
 klog            FAILED [HIGH] KlogAcpiEcTimeout: Test 1, HIGH Kernel
 klog            message: [ 8.137284] ACPI Error (psparse-0537): Method
@@ -13097,16 +13318,30 @@ klog            message: [ 9.391036] ACPI Error: Method parse/execution
 klog            failed [_SB_.PCI0.IBCM] (Node f3828738),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 9.391049] ACPI Error: Method parse/execution
 klog            failed [_SB_.PCI0.GFX0.DD03._BCM] (Node f3824b28),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel
 klog            message: [ 9.391061] ACPI Error: Evaluating _BCM failed
@@ -13285,16 +13520,30 @@ klog            message: [ 10.344788] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.PMI0._GHL] (Node
 klog            ffff88122fc1ece0), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 10.344812] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.PMI0._PMC] (Node
 klog            ffff88122fc1ec60), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
 klog            HIGH Kernel message: [ 10.380244] ACPI Warning
@@ -13892,16 +14141,30 @@ klog            message: [ 13.445980] ACPI Error: Method parse/execution
 klog            failed [_SB_.WMID.HWMC] (Node f742a8b8),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 13.446019] ACPI Error: Method parse/execution
 klog            failed [_SB_.WMID.WMAD] (Node f742aac8),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
 klog            Kernel message: [ 13.452167] ACPI Error (psargs-0359):
@@ -14186,16 +14449,30 @@ klog            message: [ 17.802564] ACPI Error: Method parse/execution
 klog            failed [_SB_.WMID.HWMC] (Node ffff8801ffc5c078),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 17.802574] ACPI Error: Method parse/execution
 klog            failed [_SB_.WMID.WMAD] (Node ffff8801ffc5c258),
 klog            AE_AML_BUFFER_LIMIT (20110112/psparse-536)
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
 klog            message: [ 17.847665] ACPI Error: Method parse/execution
@@ -14211,16 +14488,30 @@ klog            message: [ 17.985672] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.PCI0.IBCM] (Node
 klog            ffff8800b3832600), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
 klog            message: [ 17.985723] ACPI Error (psparse-0537): Method
 klog            parse/execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node
 klog            ffff8800b382b840), AE_AML_BUFFER_LIMIT
 klog            
-klog            ADVICE: Method failed: ResourceSourceIndex is present but
-klog            ResourceSource is not.
+klog            ADVICE: Generally this error occurs because of access
+klog            outside of a buffer. This occurs for several reasons: a) A
+klog            field does not fit withing the current length of a buffer,
+klog            b) an ACPI table load did not fit into a buffer, c) An
+klog            attempt to convert a buffer into an integer failed because
+klog            the buffer was zero sized, d) a SMBus/IPMI
+klog            /GenericSerialBus write failed because the buffer was too
+klog            small, e) An index into a buffer was too long and fell
+klog            outside the buffer.
 klog            
 klog            FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
 klog            1, HIGH Kernel message: [ 18.054842] ACPI Error: Needed
diff --git a/klog-0002/klog-0001.log b/klog-0002/klog-0001.log
index 38d6e53..bb8ed1c 100644
--- a/klog-0002/klog-0001.log
+++ b/klog-0002/klog-0001.log
@@ -1,4 +1,4 @@
-klog            Scan kernel log for errors and warnings.
+klog            klog: Scan kernel log for errors and warnings.
 klog            ----------------------------------------------------------
 klog            Test 1 of 1: Kernel log error check.
 klog            FAILED [CRITICAL] CommonThermalOverrun: Test 1, CRITICAL
